Digital Commons Network^™

Black Mothering In The Bay Area While Unseen And Unheard: Navigating Black Mothering In The Midst Of A Pandemic & Social Unrest, Kassie Michelle Phillips

Doctoral Dissertations

Black Mothering In The Bay Area While Unseen And Unheard: Navigating Black Mothering In The Midst Of A Pandemic & Social Unrest This narrative research study was conducted in Northern California while attending the School of Education at the University of San Francisco. Introducing a new theoretical framework called Black-Crit Mothering, this study examined the relationships of single and married Black Mothers living in the Bay Area and how Black Mothering has been directly impacted by the various pandemics that continue to take over the Black communities. These stories provided counter-narratives to the traditional views of our women in history …

Application Of Signal Processing Techniques For Health Monitoring And Damage Detection Of Memorial Bridge, Forouzandeh Mazaherimeybodi

Doctoral Dissertations

Aging and deterioration and damage to infrastructure elements such as bridges, roads, and tunnels, are some of the biggest concerns to the uninterrupted operation of the US transportation network.Structural health monitoring (SHM) is one of the most powerful tools proposed by the civil engineering research community as an economical and objective method for civil infrastructure management and condition assessment. A typical SHM process consists of continuous or periodic estimations of structural parameters based on a sensor network, feature extraction, and statistical modeling for feature classification to detect any damage that occurred to the structure. Due to the evolution of building …

Single Chain Reversible Addition-Fragmentation Chain Transfer (Raft) Poly(N-Isopropylacrylamide) For Chemical Sensing, Tianyu Ren

Doctoral Dissertations

An approach to single chain poly-N-isopropyl acrylamide (polyNIPAM) with a redox tag was polymerized by the reversible addition fragmentation-chain transfer (RAFT) method. Molecularly imprinted polymers (MIPs) technology is the design of an artificial receptor with high selectivity for a specific analyte. The synthesized RAFT polymers were devised to develop conformation-based electrochemical MIP sensors.The material polyNIPAM is attractive as a receptor of a chemical sensor. Due to its thermosensitive properties, polyNIPAM collapses above the lower critical solution temperature (LCST) and returns to its original state when the temperature is reduced below LCST. This reversible aggregation behavior shows that polyNIPAM has a …

Application Of Molecular Tools To Assess Toxicity In Industrial Wastewater And Track Viral Pathogens In Municipal Wastewaters, Mina Aghababaei Shahrestani

Doctoral Dissertations

Wastewater is a complex matrix containing a wide range of microorganisms and chemical compounds. For public health purposes, it is critical to monitor for harmful microorganisms and evaluate the toxicity of chemicals present in industrial and municipal wastewaters on human and ecosystem health. Over the past decade, sophisticated technologies such as high-throughput sequencing have enabled the development of molecular tools, which are now widely employed for tracking pathogens and assessing toxicity of municipal and industrial wastewaters. Molecular tools for biomonitoring of wastewater are designed to target specific microbial biomarkers including nucleic acids, proteins and antigens. Accordingly, this dissertation applied molecular …

Answering Topical Information Needs Using Neural Entity-Oriented Information Retrieval And Extraction, Shubham Chatterjee

Doctoral Dissertations

In the modern world, search engines are an integral part of human lives. The field of Information Retrieval (IR) is concerned with finding material (usually documents) of an unstructured nature (usually text) that satisfies an information need (query) from within large collections (usually stored on computers). The search engine then displays a ranked list of results relevant to our query. Traditional document retrieval algorithms match a query to a document using the overlap of words in both. However, the last decade has seen the focus shifting to leveraging the rich semantic information available in the form of entities. Entities are …

Environmental Implications Of Ubiquitous Dicarboxylic Acid Aerosol And Biomass Burning Generated Reactive Nitrogen, Jackson Hart Kaspari

Doctoral Dissertations

Aerosols impact our lives in many different ways, including the health of our species,visibility and the global climate. In terms of climate effects, large uncertainty still exists surrounding the combined influence of aerosols on the Earth’s radiative budget. This highlights the importance of research that seeks to better understand atmospheric aerosols and associated gas phase compounds, as advances in the field will allow for the production of more accurate climate models. In laboratory studies, great variability in reported deliquescence relative humidity (DRH) warrants the need for new methods of analysis. A custom built electrobalance with variable active particle humidity control …

Estimation And Consequences Of Asymmetric Dispersal On The Genetics Of Coastal Marine Organisms In 1-D Habitats, Kyle Teller

Doctoral Dissertations

Estimation and Consequences of Asymmetric Dispersal on the Genetics of Coastal Marine Organisms in 1-D Habitats

Many natural populations have a dispersal that is biased in one direction (asymmetric dispersal), due to physical factors in the environment such as currents in the ocean that transport larvae or winds that carry seeds. These physical factors create a preferred direction for offspring to be carried (the “downstream” direction). When there is asymmetric dispersal there are two parameters that define the dispersal distance, the mean downstream distance, and the standard deviation of dispersal distances. This present research analyzes the effects of the mean …

The Utilization And Loss Of Available Energy In Aerospace Systems, Mohammad Abbas

Doctoral Dissertations

“Theoretical principles and analytical methodology for the control volume-based energy availability methodology for aerospace vehicles are developed; applications are made to jet-propelled and rocket-propelled vehicles as well as to stand-alone engine systems. Energy availability utilization characteristics of a modeled turbojet engine are studied across a wide range of operating conditions of throttle setting, flight altitude, and flight Mach number. The method is also extended to consider jet-powered vehicles. Fundamental principles regarding entropy generation and energy availability are developed, including directly linking entropy generation and maximum range and endurance of a powered aircraft. Theory and application of the energy utilization methodology …

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Bulk Nanostructured Steels For Nuclear Reactor And Extreme Environment Applications, Maalavan Arivu

Doctoral Dissertations

"Candidate accident tolerant FeCrAl fuel (ATF) claddings for light water reactors (LWRs) need to be thinner than current Zircaloys owing to higher neutronic penalty, demanding an improvement in strength. Therefore, equal channel angular pressing (ECAP), and high-pressure torsion (HPT) were used to produce bulk ultra-fine grained and nanocrystalline Kanthal-D [KD; Fe-21Cr-5Al-0.026C (wt.%) alloy] which resulted in an improvement in strength of up to 3 times their nominal strength from grain boundary strengthening, and dislocation strengthening. Dynamic recovery was promoted due to ECAP at 520 oC rendering it with a large area fraction of less mobile low angle grain boundaries (LAGBs) …

Post-Seismic Response And Repair Of Earthquake-Damaged Reinforced Concrete Bridges, Giacomo Fraioli

Doctoral Dissertations

“In bridge structures, column members are typically designed to be the primary source of energy dissipation during an earthquake. Therefore, reinforced concrete (RC) bridges that are damaged in an earthquake tend to have damage to the column members. While many studies have been conducted on seismic strengthening of RC bridge columns, most are focused on retrofit instead of repair. In addition, the limited research on seismic repair of RC bridges has focused on evaluating the response of individual columns (member level), not the bridge structure (system level), due to limitations in modeling and especially testing of full bridge structures. Local …

Innovative Approach To Use Guayule Resin As A Bio-Based Asphalt Alternative, Ahmed Hemida

Doctoral Dissertations

"Asphalt cement will not last long as the world encounters a diminishment in crude oil. Novel resources can contribute to replacing asphalt with the sustainable, flexible pavement. This study presented guayule resin (guayule) as an innovative bio-based asphalt alternative. Ground tire rubber was used as an asphalt enhancer. To judge the guayule's contribution, guayule-based binders were investigated and compared to control asphalt and asphalt-rubber binders. Binders were assessed according to comprehensive Superpave criteria and advanced rheological tests. Component analysis was performed to link the microscale level with the macroscale level. To validate the novel binder, satisfying mix performance tests were …

Scale Formation, Properties And De-Scaling In Steelmaking, Richard Osei

Doctoral Dissertations

During continuous castings, reheating, and hot rolling, slab surfaces are exposed to atmospheres containing oxidizing gases which results in scale formation. Inefficient removal of the formed scale during reheating affects product surface quality. The effect of steel composition and operating parameters on scale formation and scale removal efficiencies were investigated. Experimental investigations were carried out using a thermogravimetric (TGA) apparatus designed to replicate the combustion gas atmosphere and temperature in actual industrial slab reheat furnaces. Report on oxidation kinetics, scale structure and properties, and descaling were conducted on laboratory cast and industrial samples. Different characterization techniques were used to analyze …

Evaluation Of Recrosslinkable Preformed Particle Gel (Rppg) As A Fluid Loss Control Material During Drilling Operations, Mohamed Saad M. Ahdaya

Doctoral Dissertations

"One of the most intense, expensive, and time-consuming problems during drilling operations is the loss of circulation, which could result in several consequences, including wellbore collapse, fluid inflow, formation damage, environmental issues, and nonproductive time. This research aims to evaluate novel materials that can mitigate lost circulation and overcome the limitation of other materials. In this research, a comprehensive evaluation of a re-crosslinkable preformed particle gel (RPPG) has been conducted to determine the extent to which it can be used to control drilling fluid losses during drilling operations. The RPPG consists of swellable gel particles that can self-crosslink to form …

Multifunctional Behaviors Of Two-Dimensional Materials And Their Composites, Yanxiao Li

Doctoral Dissertations

"Two-dimensional (2D) materials, including graphene, transition metal carbides or nitrides (TMC/Ns), have rich surface chemistry, superb electrical and mechanical properties. These unique properties make them ideal for multifunctional devices. Among them, we focused on graphene and TMC/Ns (i.e., MXenes), as well as their composites. Unlike the well-known graphene, MXenes, are relatively new and typically synthesized by the selective etching of the “A” layers from the layered carbides and /or nitrides known as MAX phases, which introduce MXenes with rich terminal groups (e.g. -O-, -OH, -F).

During my Ph.D. study, firstly, the adhesive and frictional behaviors, which are related to successful …

¿Tú Qué Sabes?: Latina Doctoral Women Disrupting And Resisting Dominant Knowledge, Sendy Ramos Madsen

Doctoral Dissertations

Education environments have systematically excluded, silenced, and erroneously spoken on behalf of Women of Color. Linear forms of scholarship and research practices propagate the dominant perspective and fail to address systems of oppression that result in epistemic suppression and academic hostility towards brown minds. Historically, Latina women have not been seen as creators of knowledge, and their access to educational spaces has been restricted. According to census projections, in 2036, Latinas/os will account for the largest minority group in the United States and one-third of the American educational system. Therefore, academic spaces must establish practices to include Latina women as …

Design Methods For Pressure Relief Well Systems At Dams And Levees, Andrew Keffer

Doctoral Dissertations

"Flood risk reduction structures such as dams and levees are important systems that provide significant benefits to the nation. Relief wells reduce the substratum water pressures that can compromise them via internal erosion. The U.S. Army Corps of Engineers (USACE) analytical method to design relief well systems by calculating discharge and excess head along an infinite line of wells was developed from the 1930s – 1950s. The research presented here increases our understanding of the method’s history and uses analytical and numerical models to improve current infinite and finite well system design practices. The historical development of this method was …

Strategies To Improve Shrinkage Resistance Of Cement-Based Materials For Extrusion-Based 3d Printing, Kavya Vallurupalli

Doctoral Dissertations

"The main objective of this study is to develop new generation of shrinkage-resistant 3D printable mortar mixtures. To this end, the research work was carried out to: i) identify key material and processing parameters that affect printability; ii) investigate the influence of water-to-cement ratio, superplasticizer dosage, and welan gum content on mortar printability; iii) propose a “printability window” where rheological properties and desorptivity can secure successful printing; iv) investigate effect of shrinkage mitigation materials (expansive agent (EA), pre-saturated lightweight sand (LWS), superabsorbent polymers (SAP), and shrinkage reducing admixture) on printability and shrinkage performance of mortar; and v) evaluate the effect …

Synergistic Effect Of Shrinkage Mitigating Strategies On Performance Of Fiber-Reinforced Cementitious Composites, Kamran Aghaee

Doctoral Dissertations

"The advantages of using shrinkage mitigating strategies to reduce shrinkage and mitigate cracking of concrete is well documented. However, the benefits and drawbacks of employing multiple strategies have not been explored. The main objective of this study is to provide insights into the mechanisms of using multiple strategies to enhance shrinkage and cracking resistance to promote the properties of high-performance cementitious composites (HPC) designated for infrastructural construction, repair, and 3D printing applications. HPC mixtures were prepared with steel and synthetic macro and microfibers, expansive agent (EA), and shrinkage reducing admixture (SRA) coupled with various curing methods e.g., internal curing using …

Promoting Distributed Energy Deployment And Diffusion For Sustainable Civil Infrastructure Using Multi-Agent Based Modeling And Quantitative Analytics, Gasser Ali

Doctoral Dissertations

"Distributed Solar Generation (DSG) using small-scale Photo-Voltaic (PV) is an evolving technology with increasingly growing market penetration due to its significant benefits to consumers and broader power systems. DSG is sustainable, provides reliability, and is cost-effective where solar energy is abundant. However, the increasingly growing adoption of DSG creates uncertainties in forecasting electric power demand and market behavior. It also causes concerns of a “utility death spiral”. To this end, the goal of this research is to critically analyze the diffusion and benefits of DSG in the electric power infrastructure as a complex System-of-Systems (SoS). Specifically, this dissertation addresses the …

Development And Application Of Ensemble Machine Learning Algorithms To Enable A Priori, High-Fidelity, And Prompt Predictions And Optimizations Of Complex Materials And Systems, Taihao Han

Doctoral Dissertations

"Complex materials consisting of multiple chemical components/phases have been widely used in different engineering applications that have strict criteria. To optimize the mixture design of complex materials, researchers invest enormous resources in cumbersome experiments. However, due to substantial variations in precursors and processing techniques, it has been challenging to develop theoretical frameworks (i.e., empirical models) that could produce reliable predictions of properties of complex materials. In recent years, scientists have harnessed the power of machine learning (ML) and “Big” data to uncover the underlying mixture design-property correlations and produce high-fidelity predictions of properties of complex materials. The ML models autonomously …

Characterizing And Modeling Methods For Power Converters, Anfeng Huang

Doctoral Dissertations

“Stable power delivery is becoming increasingly important in modern electronic devices, especially in applications with stringent requirements of its form factor. With the evolution of technology, the switching frequency in a power converter is pushed to a higher frequency range, e.g., several MHz or even higher, to decrease its size. However, the loss generated in the converter increases drastically due to the high switching frequency. In addition, a wide-band feedback controller is required to accommodate the high switching frequency in the converter. We focus on the characterization or modeling of the feedback control circuits and critical components in a switching …

Investigating The Interaction Between The Recycled Components And The Asphalt Binders, Plant, Lab, And Field Mixes, Eslam Deef-Allah

Doctoral Dissertations

"Modifying asphalt binders and mixes with recycled components is common practice due to their environmental and economic merits. Literature has indicated that different recycled components interact with (blend with) asphalt differently, ranging from no blending, partial blending, or full blending. The degree of blending between recycled components and virgin asphalt binders (VABs) and the exchanged components impact the performance of modified asphalt binders. However, the nature of the interaction process between the recycled components and the VABs is not fully understood. The primary objective of this study was to explore the interactions between recycled components and VABs. By understanding the …

Advanced Materials And Processes For Gas Separation And Storage Applications, Qasim Mohammed Al-Naddaf

Doctoral Dissertations

"Transition to a clean, renewable energy future requires departure from thermally driven separation processes. In that regard, development of new materials that exhibit high adsorption capacity and selectivity, fast kinetics, and long-term durability under multicomponent conditions is becoming attractive for the applications in clean energy. Moreover, novel sorbents and separation systems that can store gases at normal conditions offer a promising approach for stationary or onboard gas storage. Due to the limitations on the surface area and biding energy restrict commercial materials effectiveness as a potential adsorption and storage material. There is significant interest in the properties of hybrid materials …

Electrocatalytic Processes For Energy Storage & Conversion, Apurv Saxena

Doctoral Dissertations

"The continuous excessive usage of fossil fuels has resulted in its fast depletion leading to an escalating energy crisis as well as several environmental issues leading to increased research towards sustainable energy conversion. Electrocatalysts play crucial role in the development of numerous novel energy conversion devices including fuel cells and solar fuel generators.

High-efficiency and cost-effective catalysts are required for large-scale implementation of these new devices. Over the last few years transition metal chalcogenides have emerged as highly efficient electrocatalysts for several electrochemical devices such as water splitting, carbon dioxide electroreduction and, solar energy converters. These transition metal chalcogenides exhibit …

Effects Of Vacancies And Electron Temperature On The Electron Phonon Coupling In Cubic Silicon Carbide And Their Connection To The Inelastic Thermal Spike, Salah Al-Smairat

Doctoral Dissertations

“The electron-phonon interaction is an important interaction in many solids as it influences transport phenomena and related quantities such as the electrical and thermal conductivities, especially in nuclear and space applications. The importance of the electron-phonon interaction in primary damage production in 3C-SiC is the subject of this research.

The electron-phonon coupling factor was calculated using a hybrid Density Functional Perturbation Theory - Classical Electron Gas model. The coupling factor was calculated as a function of electron temperature in pristine and defective 3C-SiC, and relaxed defective cells. The electron-phonon coupling is found to depend strongly on the electronic temperature and …

Depression Of Pyrite In Polymetallic Sulfide Flotation Using Chitosan-Grafted-Polyacrylamide Polymers, Keitumetse Cathrine Monyake

Doctoral Dissertations

“In this work, Chitosan-grafted-Polyacrylamides (Chi-g-PAMs) were studied, for the first time, as selective depressants of pyrite in the flotation of base metal sulfides. Fundamental studies of the adsorption behavior of Chi-g-PAM on model sulfide minerals indicated that Chi-g-PAM was more selective to pyrite’s surfaces as compared to base metal sulfides. Results suggested that the adsorption of Chi-g-PAM at pyrite-water interface was a chemisorption in nature which involved the amine, amide, and hydroxyl groups of Chi-g-PAM. Batch flotation studies of complex sulfide ore of Mississippi Valley Type (MVT) showed that Chi-g-PAM outperformed other pyrite’s depressants at producing less pyrite-diluted concentrates. Statistical …

Advances In Control Of Uncertain Dynamical Systems With Optimal And Adaptive Approaches, Meryem Deniz

Doctoral Dissertations

"This research starts with designing optimal control for uncertain systems, adding the adaptive control input to suppress the uncertainty. It then follows with designing the optimal control for state constraint, designing the optimal nonlinear reference model, designing adaptive control to handle state constraint and uncertainty. Finally, it designs the finite-time controller for uncertain multiagent systems.

It is well known that the design of the control algorithm for an uncertain dynamical system is not trivial. Motivated by this standpoint, this study focuses on optimal and adaptive control approaches with stability and performance guarantees for uncertain sole and multiagent dynamical systems. From …

Production Of Non-Oriented Electrical Steel Thin Strip Simulating Conditions Of The Direct Twin-Roll Casting Process, Yizhou Du

Doctoral Dissertations

"In this study, a method to cast non-oriented (NGO) electrical steel with conditions of an industrial twin roll thin strip casting (TRSC) process was investigated. A novel vacuum assisted fast cooling (VA) sampling method was developed to produce 2 mm thick strip simulating conditions of an industrial TRSC process. The effects of solidification cooling rate, hot rolling deformation, and annealing time on inclusion distribution, magnetic properties, grain growth, and texture evolution of 3.4 wt.% Si NGO electrical steel with different carbon and sulfur (C&S) levels were analyzed. Samples were thermo-mechanically treated which simulated an industrial TRSC process. After a long …

Secure And Efficient Information Management In Delay(Disruption) Tolerant Network, Shudip Datta

Doctoral Dissertations

"In environments like international military coalitions on the battlefield or multi-party relief work in a disaster zone, multiple teams are deployed to serve different mission goals by the command-and-control center (CC). They may need to survey damages and send information to the CC for situational awareness and also transfer messages to each other for mission purposes. However, due to the damaged network infrastructure in the emergency, nodes need to relay messages using the store and forward paradigm, also called Delay-tolerant Networks (DTNs). In DTN, the limited bandwidth, energy, and contacts among the nodes, and their interdependency impose several challenges such …