Digital Commons Network^™

Methods And Applications Of Systems Identification, Allen Glenn Behring

Doctoral Dissertations

"A "Schmidt filter" is proposed to compute an optimal orthonormal basis for a set of "noisy" filter input functions. Procedures for determining the transfer function and inverse transfer function of the filter are given. The Schmidt filter is applied to the problem of determining mathematical models of discrete, stationary, linear, dynamic systems for the case where measurements may be corrupted by noise of unknown statistics. The identification problem is reconsidered for the case where noise and signal moments are specified. Procedures are given which insure unbiased, adaptive estimates of system order and parameters for this case. These theoretical propositions are …

Effects Of Cr-Plating And Environment On The Cracking Of Low Alloy Steels At High Temperatures, Robert C. Tooke

Doctoral Dissertations

"The cracking of low alloy Cr-Mo-V steels under cyclic stress at 1000-1100°C. was studied using a specially designed test apparatus. The results obtained from specimens plated with hard chromium are compared to those of unplated specimens. Tests conducted in gas mixtures of carbon monoxide and carbon dioxide showed that a high CO/CO₂ ratio retards cracking in both plated and unplated specimens. Both external and internal oxidation are used to explain these results. Inherent microcracks in the hard chromium plating promoted cracking in all CO/CO₂ environments. It was also found that these steels are severely embrittled in the presence …

An Experimental Investigation Of The Effects Of Ambient And Heated Steady Flow And Intense Sound Levels On The Response Of Acoustic Filter Elements, Raymond H. Schaffart

Doctoral Dissertations

"The primary purpose of this research was to investigate the effects of flow and finite amplitude waves on the response of acoustic elements. A further purpose was to evaluate the effects of elevated temperatures and cross-sectional dimensions on element performance. As an integral part of this work various laboratory techniques were explored for their suitability.

Empirical models for the acoustic impedance of side branch resonators were developed for the two operational modes, i.e., flow past the resonator and finite amplitude wave inputs. A description of the complex variation of the acoustic resistance of the resonator with flow past and variable …

Modal Truncation Of Substructures Used In Vibration Analysis, Suresh Kumar Tolani

Doctoral Dissertations

"The objective of this study is to describe in a unified manner a group of structural dynamics analyses using the substructures technique. An additional effort is to provide a consistent basis for the selection of substructure principal modes as required by this method. Substructure principal mode frequency roots and strain energy are two criteria evaluated for the selection of substructure principal modes. System eigenvalues and system strain energy are investigated for the comparison of results in the principal modes. System strain energy should provide more rational results since it is proportional to the stress times the strain in the system …

An Asynchronous Circuit Design Language System, Gregory Martin Bednar

Doctoral Dissertations

"This paper presents a system for specifying the behavior of asynchronous sequential circuits. The system consists of a special purpose Asynchronous Circuit Design Language (ACDL), a translator and a flow table generation algorithm. The language includes many special features which permit quick and precise specification of terminal behavior. It is best suited for problems originating from a word description of the circuit's operation. The translator is written with the XPL Translator Writing System and is a syntax-directed compilation method. From the translated ACDL specifications, the flow table algorithm generates a primitive flow table which is the required input for the …

Mass Transfer With Second-Order Chemical Reaction Inside Circulating Fluid Droplets, Roy James Brunson

Doctoral Dissertations

"The solution of a mathematical model is presented which describes mass transfer accompanied by a second-order chemical reaction inside a circulating, fluid sphere for the laminar flow region. The values for eight different mass transfer indices are presented as a function of the Peclet number, reaction number, diffusivity ratio, concentration ratio, and the dimensionless contact time. The results of this work are compared with the film and penetration theories for mass transfer with reaction as modified to apply inside a fluid sphere. This work corrects the three factors which limit the accuracy of applying previous theories to fluid spheres: geometrical …

Iicads--Integrated Interactive Computer Aided Design System, Archie Golden Lambert

Doctoral Dissertations

"This research has three goals. The first goal is to develop a software interface (supervisor) to support and control a variety of interactive subsystem modules; thus eliminating manual scheduling of interactive jobs. The second goal is to develop a common methodology for interactive subsystem design. The third goal is to develop a linear systems analysis package using the facilities developed under the first two goals. A software interface (supervisor) to support and control a variety of interactive subsystem modules is described. The supervisor operates under the constraints of a large multiprogramming variable task operating system as opposed to a time …

Hydro-Thermal Generation Unit Commitment And Dispatch Using A Dynamic Programming Approach, Warren Dean Graham

Doctoral Dissertations

"The problem of thermal unit commitment is solved with dynamic programming. A practical example is given which solves the problem for a six generator system over a one year time span. This long range solution is used with a hydro optimization procedure to give an optimized hydro-thermal unit commitment solution. From this, a worth of hydro value is computed for each month, which may be used in the daily dispatching of thermal units and hydro. Applications of the program are also shown for aiding in generator maintenance scheduling and evaluating purchase power contracts with neighboring utilities. Error analysis is made …

An Analytical Study Of A Confined Viscous Vortex, David Edward Crow

Doctoral Dissertations

"A composite solution for the flow field of a three dimensional, incompressible laminar, viscous vortex confined inside a conical converging nozzle is presented. This model is used to study the strong mainstream boundary layer interaction that occurs in confined vortex flows. The confined vortex flow field is divided into mainstream and boundary layer regions. A particular class of solutions of the general equations of motion is used to represent the vortex flow in the mainstream region. That is, the tangential velocity in the mainstream region is assumed to be of the form W = T(e)/R. Velocity and pressure profiles from …

A Study Of The Solid Regions In The System Zr-Te, Frances Dolores Jenkins

Doctoral Dissertations

"Relative intensity measurements of X-ray powder diffraction lines were made of compositions in the region ZrTe₀.₅ to ZrTe₂.₀, fired between 600º and 817ºC in evacuated sealed tubes. The experimental relative intensities of samples between ZrTe and ZrTe₂ were compared with values calculated for several theoretical models with different Zr vacancy ordering schemes and Te vacancy concentrations. The most probable structural model for compositions in the range ZrTe to ZrTe₁.₅ is one in which the number of Zr vacancies located at z = 0 ranges from 0% to 30%, with the concentration of Te vacancies ranging from 0 to 35%. A …

A Yield And Fracture Model For Ti-6al-4v Titanium And 7075-T6 Aluminum, Richard L. Pendleton

Doctoral Dissertations

"The objective of the research being reported in this thesis was to conduct a series of experiments on two commonly used structural metals in several different environmental pressures so that a graphical representation of the material response both to yielding and fracture could be ascertained. It was further intended to show that parameters herein defined and called effective stress, effective strain, and pressure are useful parameters for graphically representing the material response. The final goal of this research was to show that the graphical representation does, in fact, predict the yield and fracture for a simple forming process. The forming …

The Average Dissipation Curve Of An Attenuative Layered Earth Medium, Joong Hee Chun

Doctoral Dissertations

"A feasible method of estimating the attenuative properties of a layered earth medium from a reflection seismogram has been developed. An average attenuation factor of n layers in the least squares sense is designated as ß and its usefulness in real applications is investigated. Techniques of extracting dissipation factors from both noise free and noisy reflection seismic traces are discussed. In order to describe the change of the factors with an increase of depth, an average dissipation curve the form of which is similar to the average velocity of layered medium is also introduced. Both the ß and the average …

Determination Of Thermal Contact Resistance Between Metals Using A Pulse Technique, William Edward Stewart Jr.

Doctoral Dissertations

"This dissertation reports the results of an experimental and analytical investigation to determine the thermal contact resistance of several metal specimen pairs using a relatively new pulse technique. Metal specimens were aluminum 2024-T3, aluminum 6061-T6, aluminum 7075-T6, copper 110, stainless steel 304, molybdenum, and Armco iron. Thermal contact resistance was also determined for dissimilar metal specimen pairs of aluminum 6061-T6 - copper 110 and aluminum 7075-T6 - copper 110. Aluminum 7075-T6, copper 110, and stainless steel 304 specimens were tested to determine the variance of contact resistance with time after loading.

Specimens were circular cylindrical disks between .033 and .061 …

The Use Of Shaped Explosive Charges To Investigate Permeability, Penetration, And Fracture Formation In Coal, Dolomite And Plexiglas, Calvin J. Konya

Doctoral Dissertations

"The concentration of methane gas which exists in the exhaust air from a coal mine is critical. It can be controlled by dilution of the gas with fresh air or by the regulation of the rate of methane emission into the mine workings. Degasification techniques which control the emission rate are currently being developed. The use of shaped charges to initiate fractures in coal and increase the gas flow rate was the object of this research. The three areas of investigation were: 1) permeability changes in coal models after fracturing with shaped charge jets, 2) fracture formation in coal and …

Geochemical Anomalies In The Igneous Wall Rock At Mayflower Mine, Park City District, Utah, Zuhair Al-Shaieb

Doctoral Dissertations

"Approximately 500 samples were collected from the igneous wall rock of the Mayflower Mine, Park City District, Utah. The mine is the sixth largest gold producer in the United States. The samples were analyzed for copper lead, zinc silver, manganese, sodium, potassium, calcium, magnesium and iron by atomic absorption spectrophotometry. Gold was determined by neutron activation analysis, silicon and sulfur by x-ray fluorescence spectrometery. The calculation of the mineral norm from the chemical analysis showed the wall rock to be of granodioritic composition. A study of selected vein samples indicates that the copper, silver and gold content in the veins …

The Structural Behavior Of Cold-Formed Steel Members With Perforated Elements, Charles S. Davis

Doctoral Dissertations

"Analytical and experimental investigations have been conducted to study the influence of perforations on the structural behavior of cold-formed steel structural members. Since in many cases, the load-carrying capacity of cold-formed steel members depends on the buckling behavior of individual component elements, emphasis has been concentrated on the study of the instability and post-buckling strength of perforated elements. In this investigation, the buckling loads and post-buckling strength of stiffened and unstiffened compression elements having single circular and square holes have been studied analytically by using the finite element method. The effects of different holes on the buckling coefficient have been …

The Scattering Of Elastic Waves By Void Cavities, Jerry Lee Davis

Doctoral Dissertations

"Elastodynamic multipole theory, the theory of least squares, and the theory of integral representation of solutions are employed in solving certain problems involving an elastic solid containing a source and a scatterer. Both the source and scatterer are of finite geometrical extent; they occupy non-intersecting regions. The source is separable, i.e., its mathematical specification consists of an arbitrary vector function of position multiplied by a time function, which is further assumed to be a sinusoid. The scatterer emphasized is a finite void cavity of arbitrary shape; however, scatterers composed of rigid material may also be treated. The calculation of a …

Synthesis And Properties Of Cadmium Manganese Ferrites, B. W. Jong

Doctoral Dissertations

"The formation sequence of (Cd,Mn,Fe) (Mn,Fe)₂O₄ from the individual oxides,x CdO + (1-x) MnCO₃ + α-Fe₂O₃,was found by X-Ray diffraction. Cd(Mn,Fe)₂O₄ was formed completely from CdO·Fe₂O₃ and CdO·Fe₂O₄ at 900°C and reacted with MnFe₂O₄ for 0 < x < 0.5 and with α-Fe₂O₃ for 0.5 < x < 1.0 to form a single phase of (Cd,Mn,Fe) (Mn,Fe)₂O₄ at 1150°C. This is the first time that the details involved in the formation sequence of CdMn-ferrite have been shown. A mixture of 0.5 CdO + 0.5 MnCO₃ + α-Fe₂O₃ was calcined at 900°C for 2 hrs forming Cd(Mn,Fe)₂O₄ with no Cd present in the other phases. Sintering was accomplished at 1150°C for 30 minutes forming a single phase of Cd₀.₅Mn₀.₅Fe₂O₄ with a bulk sintered density of 98-99% of the X-Ray density. The rate of changing density followed the relationship, p = K ln t + c, at temperatures between 1050°C and 1300°C. Magnetic properties of CdₓMn₁₋ₓFe₂O₄ were affected by composition x. A relationship, B = gx + h, was found between maximum magnetic flux density B and composition x at room temperature for 0 <̲ x <̲ 0.3. This was rationalized by a modification of Néel's theory. The maximum magnetic flux density decreased with increasing cadmium concentration for 0.3 < x <̲ 0.5. This decrease was attributed to the changing direction of the magnetic moment in the octahedral site sub-lattice according to the superexchange theory. No magnetic properties were observed due to the formation of a compensated antiferromagnetic phase for 0.5 < x <̲ 1.0. Maximum magnetic flux density increased with bulk density, while the coercive force decreased with the grain growth and the initial permeability increased with the bulk density and grain size. A stator core used for a-c electric motor application was formed by pre-sintering at 900⁰C for 2 hrs. Slots were then sawed with a tungsten carbide blade and final sintering was accomplished at 1150⁰C for 1 hr"--Abstract, pages iii-iv.

Time Resolved Measurements Of Droplet Growth In A Wilson Cloud Chamber, Michael Anthony Vietti

Doctoral Dissertations

"The growth rates of water drops in a Wilson expansion cloud chamber are measured with air, argon and helium as the carrier gas, in the size range of .5 to 10 microns. The drops growing in the supersaturated chamber exhibit oscillations in the scattered intensity as predicted by Mie theory. Scattered intensity is measured at 30 degrees to the He-Ne laser beam. Supersaturation ratios during growth range from S =1.2 to S = 3.5 for all three gases. The initial temperature is measured and the pressure is monitored continuously so that droplet growth theory can be compared with experiment. Three …

Secondary Techniques For Increasing Fault Coverage Of Fault Detection Test Sequences For Asynchronous Sequential Networks, Lewis Ronald Hoover

Doctoral Dissertations

"The generation of fault detection sequences for asynchronous sequential networks is considered here. Several techniques exist for the generation of fault detection sequences on combinational and clocked sequential networks. Although these techniques provide closed solutions for combinational and clocked networks, they meet with much less success when used as strategies on asynchronous networks. It is presently assumed that the general asynchronous problem defies closed solution. For this reason, a secondary procedure is presented here to facilitate increased fault coverage by a given fault detection test sequence. This procedure is successful on all types of logic networks but is, perhaps, most …

Mathematical Modeling Of River Water Temperatures, Leland Lovell Long

Doctoral Dissertations

"The applicability of power spectral density techniques, Fourier series analysis, and linear regression to the mathematical modeling of river water temperature is demonstrated. Consideration is also given to the problem of estimating thermal inputs to rivers from man-made sources such as electrical power plants. First, power spectral density techniques are used in the time-series analysis of water temperature records which were taken from the Missouri River. Two spectral ranges are then studied from the standpoint of their applicability to (1) mathematical model building and (2) detection and identification of cyclic thermal inputs. Next, a Fourier regression fit to the time-series …

Synthesis And Characterization Of Poly-(P-Phenylene Pyromellitamic Acid), Constantine William Tsimpris

Doctoral Dissertations

"Poly-(p-phenylenepyromellitamic acid)s have been synthesized over the weight average molecular weight range from 8,000 to 22,000 by reaction of pyromellitic dianhydride and p-phenylenediamine in dimethylformamide. The polymers were recovered as amorphous yellow powders having planar dimensions of 3-4 x 1-2 µm with thicknesses of 0.1-0.2 µm and contained 20-30% associated dimethylformamide. Consumption of reactants and attainment of the ultimate molecular weight of the polymer was found to occur within one minute. Thermogravimetry of the solid poly(amic acid)s was used in a method developed to determine the amount of associated dimethylformamide, to study the cyclization of poly(amic acid) to polyimide, and …

An Exact Analysis Of Two-Dimensional Radiative Transfer In An Absorbing And Emitting Gray Medium, William F. Breig

Doctoral Dissertations

"The exact formulations for the radiative flux and the emissive power are presented for a two-dimensional, finite, planar, absorbing and emitting, gray medium in radiative equilibrium. Exact expressions are obtained for the medium subjected to the following types of boundary conditions: (1) cosine varying diffuse, (2) cosine varying collimated, (3) constant temperature strip, and (4) the strip illuminated by a uniform collimated flux. The solutions for the physically unrealistic cosine varying models are used to construct the solutions for the more practical finite strip models. The two-dimensional equations are reduced to one-dimensional equations by the method of separation of variables. …

The Electrochemical Reduction Of Fumaric Acid On Hg-Bi Cathodes, Chen Hwei Chi

Doctoral Dissertations

"The electrochemical reduction of fumaric acid was studied on Hg, Hg/1%Bi amalgam, and Bi at 60ºC in acidic solutions of various pH ranging from 0.3 to 3.7. The fumaric acid was reduced to succinic acid with high efficiency on each electrode. The steady state kinetic parameters included Tafel slopes of ca. 2.3 RT/F and first order concentration dependences for both undissociated fumaric acid and H⁺. Transient measurements indicated low coverages of adsorbed fumaric acid and no adsorbed hydrogen species in the potential region of the reaction. A reaction mechanism is proposed which involves a chemical rate determining step between an …

A Numerical, Time Domain Solution For The Response Of A Gimbal Supported Gyro, Floyd Stanley Hall

Doctoral Dissertations

"This paper develops an algorithm to generate a numerical solution for the response of a gimbal supported gyro to arbitrary forcing functions and base motion, and includes the normal parasitic effects of bearing friction, viscous pivot damping, and pivot spring constants. There are relatively few restrictions on gyro and gimbal structure geometry. Solution accuracy is limited only by the computing machine accuracy; the algorithm being an explicit function of the input data. The algorithm is fast and requires only a moderate amount of computer memory"--Abstract, page ii.

A Monte Carlo Calculation Of Neutron Reflection From Various Curved Surfaces, Charles Jack Kalter

Doctoral Dissertations

"Plane parallel neutron beams normally incident upon the curved surface of a solid reflector are studied with the Monte Carlo method. The geometries studied are cylindrical, parabolic, and hemispherical. It is shown that when the curved surface is cylindrical, a small "focusing effect" occurs in the reflected neutron beam. Parabolic and hemispherical surfaces do not show "focusing". A study of the factors which determine the spatial dependence of the reflected flux shows that the probability of emergence of a neutron, traveling a fixed distance from a point inside the reflector, depends upon the curvature of the surface. It is only …

Thermal Lattice Expansion Of Various Types Of Solids, Jayantkumar Shantilal Shah

Doctoral Dissertations

"Thermal lattice expansion studies of various types of solids were carried out in this investigation and were corelated to their crystallographic and various other properties. The advantages and limitations of various methods of studying thermal expansion are discussed in detail. A new design for a versatile low temperature camera to study expansion by an X-ray method is proposed. The thermal lattice expansion of silicon was negative below 119ºK. This behavior is discussed in terms of crystal structure and interatomic bonding. Diamond exhibits no anomalous thermal expansion. Lattice parameter data for many metals at low temperatures are reported for the first …

Identification Of Linear Systems With Delay Via A Learning Model, Hugh Francis Spence

Doctoral Dissertations

"The effects of input delay on an identification scheme using a learning model are investigated. The parameter adjustment laws for the learning model are derived through Lyapunov methods similar to those used for the model reference adaptive control systems of Parks. For no measurement noise or delay mismatch between the learning model and system, the parameters are adjusted to bring the error between model and plant to zero. When there is delay mismatch between the inputs of the learning model and the unknown system, the convergence of the parameters of the learning model to those of the unknown system is …

Modeling The Visual Pathway For Interactive Diagnosis Of Visual Fields, Chiam Geoffrey Goldbogen

Doctoral Dissertations

"Visual fields are an important tool for the ophthalmologist in the detection, diagnosis, and monitoring of certain diseases and maladies of the visual pathway. The aim of the present research is to build a computer system which utilizes a learning machine to develop a mathematical model of the visual pathway. It is hoped that this system may be used in the field of ophthalmology as a teaching aid, or may assist in various aspects of diagnosis. Faults corresponding to blind or impaired areas of visual fields are extracted from medical records of a patient's condition. The structure of the model …

An Investigation Of The Radiation Polymerization Of Methyl Methacrylate-Kaolin Clay Composites, James Jackson Beeson

Doctoral Dissertations

"A kinetic and characterization study has been made on the effects of gamma-rays (Co⁶⁰) on the polymerization of a 50-50 weight mixture methyl methacrylate (MMA) kaolin clay system. The effect of dose rate (7.35 - 24.9 rads per second), temperature (25 to 75ºC) and total dose on the percentage conversion of monomer to polymer was studied. The rate of formation of polymer at 25ºC in the composite system was found to be faster when compared to a bulk MMA system at the same experimental conditions. This acceleration showed that the clay had a catalytic effect on the formation of polymer. …