Digital Commons Network^™

In-Situ Assessment Of Concrete Bridge Decks And Pavements Using Stress-Wave Based Methods, Mengxing Li

Doctoral Dissertations

"Concrete infrastructure of United States is aging and deteriorating. Accurate assessment the condition of concrete infrastructure is critical for its maintenance and rehabilitation. Stress-wave based methods, including ultrasonic surface wave (USW) and impact echo (IE), are becoming popular for characterizing defects and mechanical properties of concrete infrastructures. In this dissertation, a comprehensive literature review of seismic wave theory and common types of defects identified in concrete infrastructures, as well as stress-wave based methods used for concrete infrastructure monitoring and characterizing on a selected concrete bridge deck and two concrete pavement segments are present. The utility and reliability of both methods …

Characterization And Performance Of Eco And Crack-Free High-Performance Concrete For Sustainable Infrastructure, Iman Mehdipour

Doctoral Dissertations

"The main objective of this study is to develop, characterize, and validate the performance of a new class of environmentally friendly, economical, and crack-free high-performance concrete referred to as Eco and crack-free HPC that is proportioned with high content of recycle materials. Two classes of Eco-HPC are designed for: (I) pavement (Eco-Pave-Crete); and (II) bridge infrastructure (Eco-Bridge-Crete). Eco-HPC mixtures were designed to have relatively low binder content up to 350 kg/m³ and develop high resistance to shrinkage and superior durability. A stepwise mixture design methodology was proposed to: (i) optimize binder system and aggregate skeleton to optimize packing density …

Design And Performance Of Cost-Effective Ultra-High Performance Concrete For Prefabricated Elements, Weina Meng

Doctoral Dissertations

"This study presented in this thesis aims to: (1) develop a mixture design methodology for cost-effective ultra-high-performance concrete (UHPC) incorporating high volume of supplementary cementitious materials and conventional concrete and masonry sands; (2) developed UHPC with adapted rheology incorporating lightweight sand, hybrid fibers, and nanomaterials with improved properties; (3) design prefabricated UHPC panels with fiber-reinforced polymers (FRP) for enhanced flexural properties of stay-in-place panels made with optimized UHPC; and (4) explore potential applications of such UHPC elements. The proposed design methodology produced UHPC mixtures with 28-days compressive strengths higher than 125 and 168 MPa under standard water curing and 1-d …

Randomized Encoding Of Combinational And Sequential Logic For Resistance To Hardware Trojans, Travis Edward Schulze

Doctoral Dissertations

"Globalization of micro-chip fabrication has opened a new avenue of cyber-crime. It is now possible to insert hardware Trojans directly into a chip during the manufacturing process. These hardware Trojans are capable of destroying a chip, reducing performance or even capturing sensitive data. To date, defensive methods have focused on detection of the Trojan circuitry or prevention through design for security methods.

This dissertation presents a shift away from prevention and detection to a design methodology wherein one no longer cares if a Trojan is present or not. The Randomized Encoding of Combinational Logic for Resistance to Data Leakage or …

Durability Behavior Of Fiber Reinforced Polymer And Steel Reinforced Polymer For Infrastructure Applications, Wei Wang

Doctoral Dissertations

"Crack development in reinforced concrete (RC) structures is common in elements such as bridge decks. However, these cracks can impose significant problems over time, because they allow chlorides from deicing chemicals to infiltrate concrete which will then corrode steel bars as RC structures are exposed to harsh weather. In the last decade, composite reinforcement systems are internally or externally applied to concrete structures instead of traditional steel reinforcing bars, or to strengthen concrete elements in flexure and shear. However, studies regarding the long-term durability performance of composite reinforcement systems is limited. Therefore, in order to popularize the application of these …

Understanding The Deformation Mechanisms In Nanostructured Metals By A Novel Discrete Crystal Plasticity Finite Element Model, Rui Yuan

Doctoral Dissertations

"Implementation of nanostructured metals and alloys for use in engineering applications requires a detailed knowledge of the underlying deformation mechanisms in these materials. It is well known that plastic deformation in metals and alloys is mainly mediated by dislocation activities. Nonetheless, TEM observations and atomistic simulations indicate that dislocation-mediated plasticity in nanostructured metals and alloys is significantly different from that in their coarse-grained counterparts. Therefore, this dissertation focuses on the exploration of the deformation mechanisms in nanostructured metals via crystal plasticity finite element modeling and simulation.

A statistical grain boundary dislocation source model accounting for dislocation nucleation and slip events …

Receiver Function Imaging Of Mantle Transition Zone Discontinuities Beneath Alaska, Haider Hassan Faraj Dahm

Doctoral Dissertations

"Subduction of tectonic plates is one of the most important tectonic processes, yet many aspects of subduction zone geodynamics remain unsolved and poorly understood, such as the depth extent of the subducted slab and its geometry. The Alaska subduction zone, which is associated with the subduction of the Pacific Plate beneath the North America plate, has a complex tectonic setting and carries a series of subduction episodes, and represents an excellent target to study such plate tectonic processes. Previous seismological studies in Alaska have proposed different depth estimations and geometry for the subducted slab. The Mantle transition zone discontinuities of …

Bootstrap-Based Confidence Intervals In Partially Accelerated Life Testing, Ahmed Mohamed Eshebli

Doctoral Dissertations

"Accelerated life testing (ALT) is utilized to estimate the underlying failure distribution and related parameters of interest in situations where the components under study are designed for long life and therefore will not yield failure data within a reasonable test period. In ALT, life testing is carried out under two or more higher than normal stress levels, with the resulting acceleration of the failure process yielding a sufficient amount of un-censored life-span data within a practical test duration. Usually one (or more) parameters of the life distribution is linked to the stress level through a suitably selected model based on …

Event-Triggered Near Optimal Adaptive Control Of Interconnected Systems, Vignesh Narayanan

Doctoral Dissertations

"Increased interest in complex interconnected systems like smart-grid, cyber manufacturing have attracted researchers to develop optimal adaptive control schemes to elicit a desired performance when the complex system dynamics are uncertain. In this dissertation, motivated by the fact that aperiodic event sampling saves network resources while ensuring system stability, a suite of novel event-sampled distributed near-optimal adaptive control schemes are introduced for uncertain linear and affine nonlinear interconnected systems in a forward-in-time and online manner.

First, a novel stochastic hybrid Q-learning scheme is proposed to generate optimal adaptive control law and to accelerate the learning process in the presence of …

Reliability Prediction In Early Design Stages, Yao Cheng

Doctoral Dissertations

"In the past, reliability is usually quantified with sufficient information available. This is not only time-consuming and cost-expensive, but also too late for occurred failures and losses. For solving this problem, the objective of this dissertation is to predict product reliability in early design stages with limited information. The current research of early reliability prediction is far from mature. Inspired by methodologies for the detail design stage, this research uses statistics-based and physics-based methodologies by providing general models with quantitative results, which could help design for reliability and decision making during the early design stage. New methodologies which accommodate component …

Studies On Neutron Diffraction And X-Ray Radiography For Material Inspection, Fahima Fahmida Islam

Doctoral Dissertations

"Among the different probes to study the structures of the bio and structural materials, X-ray and neutron are widely used because of their distinctive usefulness in investigating different structures. X-ray radiography and neutron diffraction are two widely known non-destructive techniques for material inspection. Here we demonstrate the design of neutron diffractometer with low power source and analyze the digital image produced by the X-ray radiography instead of neutron diffraction because of the availability of the data. Neutron diffraction is a powerful tool for understanding the behavior of crystal structures and phase behaviors of materials. While neutron diffraction capabilities continue to …

Thermomechanical Fatigue Life Investigation Of An Ultra-Large Mining Dump Truck Tire, Wedam Nyaaba

Doctoral Dissertations

The cost benefits associated with the use of heavy mining machinery in the surface mining industry has led to a surge in the production of ultra-large radial tires with rim diameters in excess of 35 in. These tires experience fatigue failures in operation. The use of reinforcing fillers and processing aids in tire compounds results in the formation of microstructural inhomogeneity in the compounds and may serve as sources of crack initiation in the tire. Abrasive material cutting is another source of cracks in tires used in mining applications. It suffices, then, to assume that every material plane in the …

Experimental Study Of Natural Convection Heat Transfer And Gaseous Dynamics From Dual-Channel Circulation Loop, Ibrahim Ahmed Said Abdallah

Doctoral Dissertations

"This research focuses on establishing a range of scaled separate and integral effects experiments for studying thermal-hydraulic behavior occurring within a component or region of the prismatic very high-temperature reactor (VHTR) such as plenum-to-plenum heat transfer and gaseous dynamics during natural circulation. Natural circulation of the coolant is the leading capability for VHTR to transport the decay heat from the core to the reactor vessel during accident scenarios. To address this need, a scaled-down facility is designed and developed with only two channels with upper and lower plena. The emphasis is placed on high-resolution and high-fidelity experimental data for local …

Theoretical Calculations For Electron Impact Ionization Of Atoms And Molecules, Sadek Mohamed Fituri Amami

Doctoral Dissertations

"In the last twenty years, significant progress has been made for the theoretical treatment of electron impact ionization (e,2e) of atoms and molecules and, for some cases, very nice agreement between experiment and theory has been achieved. In particular, excellent agreement between theory and experiment and theory has been achieved for ionization of hydrogen and helium. However, agreement between experiment and theory is not nearly as good for ionization of larger atoms and molecules. In the first part of this dissertation, different theoretical approaches will be employed to study the triply differential cross section (TDCS) for low and intermediate energy …

Event-Triggering Architectures For Adaptive Control Of Uncertain Dynamical Systems, Ali Talib Oudah Albattat

Doctoral Dissertations

"In this dissertation, new approaches are presented for the design and implementation of networked adaptive control systems to reduce the wireless network utilization while guaranteeing system stability in the presence of system uncertainties. Specifically, the design and analysis of state feedback adaptive control systems over wireless networks using event-triggering control theory is first presented. The state feedback adaptive control results are then generalized to the output feedback case for dynamical systems with unmeasurable state vectors. This event-triggering approach is then adopted for large-scale uncertain dynamical systems. In particular, decentralized and distributed adaptive control methodologies are proposed with reduced wireless network …

Geophysical Assessment Of Soil And Rock In The New Madrid Seismic Zone, Faraj Mohamed Eljabri

Doctoral Dissertations

"The research presented here consists of two case studies: the first from a study site in Illinois and the second from a site in Arkansas. In both instances, geophysical investigations were conducted to characterize the subsurface. At the Illinois site, borehole control, downhole seismic (DHS), seismic refraction tomography (SRT) and multichannel analysis of surface waves (MASW) data were acquired for the purpose of seismic site characterization. Shear wave and compressional wave velocities were used to estimate depth to bedrock and to generate 1-D plots depicting variations in Poisson's Ratio, elastic moduli and density. The average shear wave velocity in the …

Development Of Active Microwave Thermography For Structural Health Monitoring, Ali Foudazi

Doctoral Dissertations

"Active Microwave Thermography (AMT) is an integrated nondestructive testing and evaluation (NDT&E) method that incorporates aspects of microwave NDT and thermography techniques. AMT uses a microwave excitation to generate heat and the surface thermal profile of the material or structure under test is subsequently measured using a thermal camera (or IR camera). Utilizing a microwave heat excitation provides advantages over traditional thermal excitations (heat lamps, etc.) including the potential for non-contact, selective and focused heating. During an AMT inspection, two heating mechanisms are possible, referred to as dielectric and induction heating. Dielectric heating occurs as a result of the interaction …

Designing High Performance Overall Water Splitting Electrocatalysts From Non-Precious Metal Selenides, Abdurazag T. Swesi

Doctoral Dissertations

“The energy production has been depending mostly on fossil fuel which will be depleted someday in the near future. Aspects such as the loss of energy resources and destruction of the environment have motivated researchers for pursuing transition away from fossil fuels to renewable solar-fuels. Therefore, in order to meet the continuous increasing demand for energy, the hydrogen, with the largest energy density stored in it, can then efficiently be used in fuel cells without concern of contaminants. Water splitting reaction to generate H₂ and O₂ is one promising method of converting solar energy into fuels. The major …

Acquisition Of Active Multichannel Analysis Of Surface Waves (Masw) Data In Karst Terrain, Ghassan Salem Alsulaimani

Doctoral Dissertations

"This study was designed to verify the effects and data reproducibility when the length of receiver array, receiver spacing, source offset and array orientation parameters are changed for data acquired using multichannel analysis of surface waves (MASW), at intended target depth of 30ft (9m), and to compare the results with electrical resistivity tomography (ERT) data obtained for the same study site.

The MASW data acquired for 34 sites, along four profiles for each site using variable source offsets of 10ft (3m) and 30ft (9.1m), and variable receiver spacings of 2.5ft (0.76m) and 5.0ft (0.76m), concurrently. Out of the 272 profiles …

Numerical And Experimental Study Of New Designs Of All-Vanadium Redox Flow Batteries For Performance Improvement, Mohammed Abdulkhabeer Ali Al-Yasiri

Doctoral Dissertations

"Energy storage is envisioned as a key part of a renewable energy solution incorporated in a grid that overcomes two critical limits of renewable energy: intermittency and uncertainty. Among various technologies, a vanadium redox flow battery (VRFB) offers a promise because of its unique features such as long cycle life, separation of energy and power ratings, and capability of a deep discharge. The remaining challenges, however, include the limited application due to low energy density and complicated geometries. The complex geometry makes it difficult to optimize the performance and can cause a serious concern about leakage of the liquid. The …

Experimental And Computational Investigation Of Multi-Principal Element Alloys, Mohsen Beyramali Kivy

Doctoral Dissertations

"Multi-principal element (MPE) alloys, unlike traditional alloys, consist of five or more principal elements with near equi-atomic compositions creating a large new compositional space for exploring new alloy possibilities. However, designing MPE alloys with the desired phases, microstructures and properties is challenging task, and there is a demand for basic research for a better understanding of structure-processing-property relations in these alloys.

In this Ph.D. research, different computational models and experiments were integrated to study phase formations, and mechanical properties of different MPE alloys. Density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations were used to determine crystal structures, …

Advanced Analytical Strategies To Determine Biomedical Parameters For Medical Diagnostics, Drug Delivery, And Therapy, Sisi Chen

Doctoral Dissertations

"Biomedical parameters are critical for diseases prognosis, diagnosis and therapy. Many research groups have dedicated their studies to develop analytical instrumentation and apply analytical methods to determine biomedical parameters that have the potential to help with disease control and increase public health. This dissertation focuses on three major aspects of analytical strategies development and applications: 1) detection of pH changes caused by nanotoxicity (induced by TiO₂ nanoparticles) using newly developed micro-pH sensor, 2) quantification of renal cell carcinoma (RCC) biomarkers by high-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS), and 3) nuclear magnetic resonance (NMR) studies of porous wall …

Quantitative Dependability And Interdependency Models For Large-Scale Cyber-Physical Systems, Koosha Marashi

Doctoral Dissertations

"Cyber-physical systems link cyber infrastructure with physical processes through an integrated network of physical components, sensors, actuators, and computers that are interconnected by communication links. Modern critical infrastructures such as smart grids, intelligent water distribution networks, and intelligent transportation systems are prominent examples of cyber-physical systems. Developed countries are entirely reliant on these critical infrastructures, hence the need for rigorous assessment of the trustworthiness of these systems. The objective of this research is quantitative modeling of dependability attributes -- including reliability and survivability -- of cyber-physical systems, with domain-specific case studies on smart grids and intelligent water distribution networks. To …

Node Localization In Underwater Sensor Networks (Uwsn), Huai Huang

Doctoral Dissertations

"This dissertation focuses on node localization in underwater wireless sensor networks (UWSNs) where anchor nodes have knowledge of their own locations and communicate with sensor nodes in acoustic or magnetic induction (MI) means. The sensor nodes utilize the communication signals and the locations of anchor nodes to locate themselves and propagate their locations through the network.

For UWSN using MI communications, this dissertation proposes two localization methods: rotation matrix (RM)-based method and the distance-based method. Both methods require only two anchor nodes with arbitrarily oriented tri-directional coils to locate one sensor node in the 3-D space, thus having advantages in …

Characterization And Numerical Simulation Of The Microstructural And Micromechanical Viscoelastic Behavior Of Oil Sands Using The Discrete Element Method, Eric Kofi Gbadam

Doctoral Dissertations

"Oil sands are naturally geologic formations of predominantly quartz sand grains whose void spaces are filled with bitumen, water, and dissolved gases. The electric rope shovel is the primary equipment used for excavating the Athabasca oil sand formations. The equipment's static and dynamic loads are transferred to the formation during excavation and propel. These loads cause ground instability leading to sinkage or rutting, crawler wear, and fracture failures. These problems result in unplanned downtimes, production losses, and high maintenance costs. In order to address these problems, there is a need to develop valid models that capture the behavior and performance …

Lhd Vibrations Analysis And Numerical Modeling During Operations, Kgosietsile Kolobe

Doctoral Dissertations

"Load-haul-dump vehicles (LHDs) are extensively used as primary loaders in mining operations. LHDs have proven to be vigorous, extremely productive and reliable in mining applications. They have a wide range of tramming capacities that have enabled them to become an essential component in the hard rock mining industry.

Increased mining economic challenges and global competition means the mining industry has to maximize productivity by cutting down operating and capital costs. Also, improvements in safety standards have led to the demand for safer and efficient machines.

LHD operators are at a high risk of whole-body vibrations (WBVs) exposure leading to musculoskeletal …

Modal Based Bga Modeling In High-Speed Package, Shuai Jin

Doctoral Dissertations

"In the Section 1, the improved "Root-Omega" method for extracting dielectric properties from fabricated multilayer printed circuit boards is proposed. Based on the electrical properties of fabricated transmission lines, the improved "Root-Omega" method applied to cases with smooth and rough conductors is validated using simulations. Error sensitivity analysis is performed to demonstrate the potential errors in the original "Root-Omega" procedure and the error sensitivity is significantly reduced by the proposed improvements.

In the Section 2, a fast modal-based approach is developed to accurately and efficiently capture the proximity effect. Image theory is also applied in the proposed approach to reduce …

Advanced Control Architectures For Grid Connected And Standalone Converter Systems, Subhajyoti Mukherjee

Doctoral Dissertations

"This dissertation proposes new control algorithms dedicated towards improving the reliability, computational burden and stability in grid-connected and stand-alone based power electronic converter systems applicable for ac microgrids.

Two voltage sensorless control architectures, one for stand-alone applications and the other for grid-connected application are established in this thesis. The output voltage of a standalone single-phase inverter is controlled directly by controlling the output filter capacitor current without using a dedicated output voltage sensor. A method to estimate the output filter capacitance is also presented. For the grid connected converter, a novel closed loop estimation is presented to estimate the grid …

Characterizing Long-Term Groundwater Conditions And Lithology For The Design Of Large-Scale Borehole Heat Exchangers, David Charles Smith

Doctoral Dissertations

"Construction of large scale ground coupled heat pump (GCHP) systems that operate with hundreds or even thousands of boreholes for the borehole heat exchangers (BHE) has increased in recent years with many coming on line in the past 10 years. Many large institutions are constructing these systems because of their ability to store energy in the subsurface for indoor cooling during the warm summer months and extract that energy for heating during the cool winter months.

Despite the increase in GCHP system systems constructed, there have been few long term studies on how these large systems interact with the subsurface. …

Atomic/Molecular Layer Deposition Prepared Size-Selective Catalysts And Supported Nickel Catalysts, Zeyu Shang

Doctoral Dissertations

"Heterogeneous catalysts are widely used because of their many advantages. In this dissertation, the application of atomic/molecular layer deposition (ALD/MLD) in heterogeneous catalyst synthesis and modification was examined.

A novel nanostructured size-selective catalyst was synthesized by depositing ultra-thin porous shells on the surface of catalysts. The ultra-thin porous shells were formed by oxidation of aluminum alkoxide films deposited by MLD. The catalytic activity of the size-selective catalyst was improved by introducing gaps between the porous shell and catalytic metal nanoparticles. The introduction of gaps greatly reduced the catalyst activity loss, which resulted from the contact areas between the active sites …