Digital Commons Network^™

Nmr Relaxometry Approach For The Detection Of Asphalt Binder Performance Properties, Rebecca Herndon

Doctoral Dissertations

"Asphalt is a necessary material for transportation infrastructure. Understanding the material properties of asphalt binders is critical for improving infrastructure and enhancing the lifetime of pavements. While the physical properties of asphalt binders are well-defined by standard procedures and parameters, the chemical environment lacks definition. Physical parameters like viscosity and stiffness are traditionally used to differentiate asphalt binders, describe aging, and indicate the impact of additives. However, these tests have limited insight into the material's chemical environment. Therefore, a nondestructive analytical technique, nuclear magnetic resonance (NMR) relaxometry, was employed to investigate the chemical environment of asphalt binders. Although NMR relaxometry …

Advancing Refuge Alternatives In Mine Emergencies Using Advanced Numerical Simulation, Kutay Emre Karadeniz

Doctoral Dissertations

"Incidents and emergencies within underground coal mines can result in severe injuries or even loss of life, particularly due to the hazardous nature of mine explosions. One of the options for the miners to protect themselves from these hazards is to be sheltered in a refuge alternative (RA). However, the literature lacks an analysis of survivability constraints and the structural integrity of RAs when exposed to geomechanical changes and the ability to withstand the impact of coal mine explosions. In this study, based on the utilization and survivability constraints, basic human requirements and the required physical specifications of RAs during …

Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation, Jeremiah John Rittenhouse

Doctoral Dissertations

"Many engineering structures can be modeled as rectangular plates, including solar cells. Carefully controlled plate vibration can be useful to solve an engineering problem, such as lunar dust accumulation on solar cells, which blocks light and reduces power generation. For this application, plate vibration at resonance is studied and used experimentally to eject lunar dust from a solar cell.

Piezoelectric actuator placement on the inactive side of a solar cell to induce vibration dust mitigation from the active side of the cell is presented in this work. Three solar cell prototypes were created and tested for efficacy, resulting in an …

Exploring The Feasibility Of Innovative Integration Of Phase Change Materials For Thermo-Adaptive Asphalt Pavements, Farshad Saberi Kerahroudi

Doctoral Dissertations

"Current research examined the feasibility and efficiency of employing phase change materials (PCMs) in asphalt pavement materials to result in thermo-adaptive asphalt pavement. The PCM was introduced to the asphalt materials in three different scales, including asphalt binder, asphalt mastic, and asphalt mixture. After investigating asphalt at different scales, mix blending method was found as the easiest method without any complexity to mix asphalt binder with PCM. The testing results could reveal an improvement in the high temperature performance of asphalt binder without sacrificing the low temperature performance with the presence of PCM and Gilsonite. Also, introducing PCM to asphalt …

Development Of Ligands And Metal Complexes With Weakly Coordinating Apical Elements And Their Application To Nitrene Insertion And Addition To C‒H And C=C Bonds, Meenakshi Sharma

Doctoral Dissertations

"We present a family of triangular coinage metal M₃Cl₃ complexes [M = Cu (I), Ag (I)] supported by antimony [Sb (III)], and bismuth [Bi (III)]-centered highly basic tetramethyl-guanidinyl [TMG₃trphen-E] (E = Sb, Bi) ligand frameworks with their applications as catalysts toward the construction of C‒N bond through aziridination and amination reaction methodologies.

The [(TMG₃trphen-Sb)Cu₃(µ-Cl)₃] catalyst gives better yields of aziridines with styrenes than [(TMG3trphen-Bi)Cu₃(µ-Cl)₃] with PhINTs as a nitrene source. However, the catalytic reactivity of both catalysts is enhanced by an electrophilic nitrene, PhINTces for …

Ceramic Dielectrics For High Temperature Capacitor Applications, Alan Daniel Devoe

Doctoral Dissertations

Technical progress in microelectronics is allowing operation in environments that were previously considered impossible. Building complete electronic circuits for applications above 450 degrees C, such as the planned NASA missions to Venus, require a variety of active and passive components, including multilayer ceramic capacitors (MLCC).

This study explores calcium zirconate CaZrO3 and magnesium oxide MgO based dielectric compositions for MLCC applications that are capable of operating at extreme temperatures between 450 degrees C and 600 degrees C. Both materials were characterized with respect to impurities, dopants, crystal structure and microstructural development. Dielectric properties were measured to determine permittivity, dissipation factor, …

Applying Human System Integration Principles To The Investigation, Design And Validation Of Interventions For Self-Escape In Underground Mines, Eugene Adubofour Gyawu

Doctoral Dissertations

This dissertation investigates the use of human systems integration (HSI) to develop technologies for miners’ self-escape during a mine emergency, addressing barriers that compromise miner safety during emergencies.

Recognizing the inherently hazardous nature of underground mining, this study has three core objectives: (1) assessing miners' perceptions of proposed self-escape interventions, (2) designing interventions based on these insights, and (3) validating their effectiveness using experimental testing. This work evaluates self-escape interventions for both coal and metal/non-metal miners using scenario-based surveys, information design reviews, label designs and experimental testing methods varying across three distinct studies.

Results reveal that miners identified improvements to …

Implication And Applications Of Machine Learning On Biomedical Images, Jason Hagerty

Doctoral Dissertations

Medical imaging ranges in modality including computer tomography imaging, x-ray imaging, digital microscopy, and macro-focus dermoscopy images. The latter two modalities are the focus of the presented work.

To perform a diagnostic evaluation on the captured dermoscopy image, it begins with what is usually a labor-intensive operation that requires an expert to perform the initial segmentation for localizing a region of interest (ROI). Once that ROI is obtained, a physician with years of training and experience will observe biological markers that can be used to visually differentiate whether a lesion is benign or malignant. A similar process is used for …

Metal-Organic Thin Film Coated On Optical Fiber, Nahideh Salehifar

Doctoral Dissertations

This dissertation explores the development of metal-organic framework (MOF)-based optical fiber sensors for detecting volatile organic compounds (VOCs) at low concentrations (parts-per-billion to parts-per-million). In the first part of the study, theoretical calculations were performed using effective medium approximation (EMA) models, including Lorentz–Lorentz, Maxwell–Garnett, and Bruggeman equations, to predict the refractive index changes of MOFs upon gas adsorption. These models were applied to MOFs such as ZIF-7, ZIF-8, ZIF-90, MIL-101(Cr), and HKUST-1 to evaluate their potential for gas sensing.

In the second part of the dissertation, experimental work was conducted to validate the theoretical predictions. MOF-coated optical fibers were fabricated …

Systematic Esd Analysis And Modeling For Electronic Device, Zhekun Peng

Doctoral Dissertations

Systematic ESD analysis provides good pre-compliance to ESD robustness evaluation on the electronic device from device level to component/system level to on-chip level. The whole process involves corona discharge on display, system level ESD analysis on PCB for race condition and transient response and 3D IC package impact to on-die ESD.

ESD to the display cover glass can damage touchscreen traces by sparkless corona discharges on the glass surface. A non-linear time dependent transmission-line model is proposed to model corona streamer propagation in terms of the coupling current and propagation speed. Results are highly promising to model the corona discharge …

The Structure, Properties And Dissolution Behaviors Of Phosphate Glasses, Han Zhang

Doctoral Dissertations

The poor chemical durability remains a critical challenge for the application of phosphate glasses. This study investigates the compositional influences on the structure, properties and chemical durability of Li2O-ZnO-P₂O₅ glasses. Their structural characteristics were analyzed utilizing high-performance liquid chromatography, Raman spectroscopy, and X-ray photoelectron spectroscopy. The incorporation of (Li2O+ZnO) in LZeq glasses depolymerizes the phosphate network. In LZ40P and LZ45P glasses, Li⁺ initially replaces Zn²⁺ associated with non-bridging oxygens (NBOs) in Q² tetrahedra. Once the substitution in Q² is complete, further Li⁺ incorporation leads to the replacement of Zn²⁺ in Q^{1 …}

Epitaxial Growth Of Metal-Organic Framwork Thin Films By Electro-Conversion And Electrodeposition, Xiaoting Zhang

Doctoral Dissertations

Electrochemical epitaxy is a facile and inexpensive soft-solution process to fabricate highly ordered thin films. This research focuses on the epitaxial growth of metal-organic framework (MOF) thin films by electrochemical methods which include electro-conversion and electrodeposition.

First, an electrochemical conversion pathway was invented to achieve epitaxial MOF thin films. Epitaxial single-domain Cu-BTC(111) thin films were manufactured by electrochemical oxidation of Cu₂O(111) films electrodeposited on single-crystal Au(111). The single-crystal-like Cu-BTC(111) thin films with out-of-plane and in-plane order provide well-aligned 3.5 Å triangular windows along the [111] direction. Cu-BTC(111) foils were fabricated from the Cu-BTC/Cu₂O system by electrochemical …

Assessing And Comparing Geophysical Methods For Resolving Shallow Subsurface Geology, Abdullah Basaloom

Doctoral Dissertations

Geophysical methods are essential tools for investigating shallow subsurface structures, offering non-invasive means to characterize geological features and detect anomalies. Techniques such as electrical resistivity tomography (ERT), towed Transient Electromagnetic (tTEM), seismic refraction, magnetic, gravity, and magnetotelluric (MT) are commonly employed to image subsurface conditions with high resolution.

This study started with an in-depth analysis of comparing results co-located in space to assess uncertainties and resolution in the obtained resistivity models in the Kansas River Alluvial Aquifer (KRAA). Our results provided a quantitative interpretation of resistivity estimates between different geo-electrical methods (ERT, tTEM and DPEC). Following this, we provided a …

Enhanced Optimization Of Mass Transfer For Carbon Capture And Wastewater Remediation In Algal Systems Through Algorithmic And Bioprocessing Techniques, Peter Ofuje Obidi

Doctoral Dissertations

The scalability and industrial deployment of algal cultivation systems are limited by suboptimal mass transfer, constraining their effectiveness in carbon capture and wastewater remediation. This research investigated these challenges through integrated optimization methodologies that combine algorithmic frameworks with enhanced bioprocessing techniques to enhance efficiency, economy, and scalability. A System-of-Systems (SoS) meta-architecture was developed using genetic algorithms and fuzzy assessor functions to demonstrate a pathway toward cost reduction. Rigorous mechanical and chemical characterizations were quantitatively analyzed to reveal existing optimization strategies and further evaluated the best strategies to use in enhancing mass transfer for improved biomass yield. The work also integrates …

Nutrient Fate, Mass Balance, Species Selection, And Plant Management Strategies With Floating Treatment Wetlands, Carla Campbell

Doctoral Dissertations

Excess nutrients in shallow urban ponds can lead to harmful algal blooms, low dissolved oxygen, and internal phosphorus cycling. These effects can compromise municipal water supplies and cause negative impacts on fisheries and recreation. Floating treatment wetlands (FTWs) show promise to mitigate surface water nutrient pollution. However, despite recent research, many aspects of FTWs remain poorly characterized. The contribution of FTW components to nutrient removal, local species selection, and plant management strategies were the focus of this dissertation. Mesocosm experiments revealed that the combination of plants and coir fiber growth media in FTWs appeared to positively affect plant biomass gain …

Tailoring Selected Aerogels To Targeted Applications, Stephen Yaw Owusu

Doctoral Dissertations

Aerogels are ultra-lightweight, porous solid materials characterized by a three-dimensional nanostructured network. Owing to their exceptional physical and chemical properties, aerogels have garnered considerable attention within the materials science community and were recognized by IUPAC in 2022 as one of the top ten emerging technologies in chemistry. Although numerous aerogels have been synthesized, only a few have been effectively tailored for specific applications. Optimizing the properties of known aerogels for targeted uses remains challenging. This dissertation investigates strategies for tailoring aerogels derived from isocyanate-benzoxazine, benzodiazine, and phenolic resins to meet the requirements of various advanced applications. The approaches employed include …

Characterization And Deportment Of Anode Impurities In Copper Electrorefining, Charles Michael Campbell

Doctoral Dissertations

The objective of this research was to study the deportment of the group 15 elements, arsenic, antimony and bismuth during copper electrorefining. Samples were collected from six industrial copper anodes with different compositions. Specimens were physically characterized and electro refined to understand the differences in the behavior of selected impurities. Inclusions in the cast metal structures were characterized using automated scanning electron microscopy and energy dispersive spectroscopy to measure and correlate their size, shape and composition. Arsenic and lead were found to have a positive correlation between concentration and size of inclusions. Using wavelength dispersive spectroscopy, multiphase inclusions were examined, …

Data-Driven Mulitiscale Modeling Of Electrochemical Transport, Non-Linear Electrical Contact, And Additive Manufacturing Processes, Emmanuel Olugbade

Doctoral Dissertations

The growing demand for high-efficiency energy systems and advanced manufacturing technologies requires predictive frameworks that link atomic-scale physics with engineering-scale performance. This dissertation develops a unified multiscale modeling approach that integrates molecular dynamics, density functional theory, finite-element analysis, and machine learning to connect structure, transport, and performance across materials and processes. Depending on the interactions involved, the framework employs loose coupling for parameter transfer, tight coupling for two-way feedback, and hybrid coupling where machine-learning surrogates accelerate high-fidelity simulations while retaining physical interpretability. In electrochemical systems, an XGBoost-enhanced single-particle model reproduces P2D-level electrolyte potential dynamics at roughly one-hundredth the computational cost, …

Machine Learning Models For Location Prediction, Message Routing And Path Planning For Rescue Of Underground Miners, Abhay Goyal

Doctoral Dissertations

Self-rescue during underground mine disasters is vital for miner safety. Evolving hazards and post-disaster conditions demand solutions that enable navigation under severe communication and computational constraints. Centralized systems often fail in such rugged settings, while decentralized methods—particularly Delay Tolerant Networks (DTNs), proven in battlefields and space missions—offer distinct advantages for underground applications. This research addresses five core challenges: (i) predicting miners’ next locations on low-power devices using points of interest and movement sequences; (ii) delivering timely updates on safe routes, evacuation zones, and hazardous areas; (iii) evaluating energy efficiency and comparing graph-based approaches to existing methods; (iv) enabling edge-ready frameworks, …

Viscosity Stratified Turbulence: Insights From Direct Numerical Simulations, Quasilinear Reduction And Resolvent Analysis, Pulkit Kumar Dubey

Doctoral Dissertations

This dissertation focuses on wall-bounded shear-driven turbulence with temperature-dependentviscosity. Direct numerical simulations and quasilinear reduction have been used to establish the asymmetric variation of turbulent statistics in the wall-normal direction. A comparison of energy spectra in the cold and hot halves of the channel reveals that large scale motions are amplified in the more viscous half while small scale motions are amplified in the less viscous half. Interestingly, the threshold wavenumber distinguishing these scales remains independent of stratification. This observation has been verified via a low-order reconstruction of the turbulent kinetic energy profile using resolvent analysis. Fourier modes that selectively …

Investigation Of Shockwave Behavior To Inform Helmet Design Using Schlieren Imagery And Free-Field Blasts, Cody Jh Thomas

Doctoral Dissertations

"Ballistic resistance of military helmet designs is a prioritized feature to protect warfighters from traumatic brain injury. However, injuries from shock-based threats have not been optimized for warfighter protection and have resulted in the prevalence of blast-induced traumatic brain injury (bTBI). Research gaps were identified in understanding the under wash effect using free field blasts and schlieren imagery. Thus, the following were investigated: (1) overpressure changes on a warfighter’s head due to directionality from a blast, (2) shock wave dampening effects of viscoelastic materials in helmets, and (3) geometric effects of a helmet brim design in the reduction of bTBI. …

Characterization And Modeling Of Properties Of Unsaturated And Partially Damaged Cement-Based Materials, Rezwana Binte Hafiz

Doctoral Dissertations

"Transport properties, governing the resistance of cement-based materials to harmful substances are essential considerations for long-term performance. This study addressed the often-overlooked dimension of transport properties in unsaturated cement-based materials, crucial as most concrete structures face variable environmental conditions, leading to partial saturation. A two-scale model was introduced, enhancing our comprehension of transport properties in conditions reflecting real-world scenarios. Empirical correlation representing bulk paste characteristics was established, facilitating the upscaling of properties to mortar and concrete. The model was extended to predict the transport properties of mortar as well.

Environmental factors can contribute to the degradation of cement-based materials, with …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Nano-Micro Engineering For Advanced Energy Devices, Tazdik Patwary Plateau

Doctoral Dissertations

The development of advanced materials and manufacturing techniques for energy storage devices is continuously growing. The research emphasizes micro-engineering, nano-engineering, and advanced materials science, with the goal of enhancing the performance and scalability of manufacturing methods of different materials processing with a view of achieving sustainability. In the micro-engineering domain, novel methods for fabricating thick electrodes with short diffusion paths are introduced, enabling higher mass loading and improved battery performance. Additionally, innovative strategies for optimizing the performance of carbon nanofibers (CNFs) as anode materials in LIBs are explored in the nano-engineering domain. These studies address key challenges such as inter-bonding …

On The Importance Of Novel Adsorption Processes And Structured Adsorbents For Biogas Upgrading And Storage, Kyle Newport

Doctoral Dissertations

The current adsorption processes investigated for biogas upgrading encounter severe challenges with regards to both adsorbents and processes, which necessitate the design and development of novel approaches to effectively separate carbon dioxide from methane and, hence, produce pipeline-grade renewable natural gas (RNG) as a fuel. These key challenges include (i) moderate CO2/CH4 selectivity, (ii) relatively long cycle times, (iii) high regeneration energy requirements, (iv) high-pressure drop, and (v) short adsorbent lifetime. The current biogas upgrading processes typically rely on pressure swing adsorption (PSA) or temperature swing adsorption (TSA). While PSA cycles are fast, the system requires large amounts of energy …

Deep Learning And Adaptive Clustering Approaches For Flood Prediction And Efficient Sensor Placement In Missouri, Fahimeh Sharafkhani

Doctoral Dissertations

Floods represent formidable natural calamities, posing a significant threat to communities and infrastructure due to their unpredictable and often devastating consequences. The occurrence of floods is influenced by a convergence of meteorological, hydrological, and geographical factors, resulting in changes to the patterns of rising water levels. Machine learning models have emerged as favored tools in recent times for modeling water levels and enhancing the precision of flood predictions. This research employs both supervised and unsupervised machine learning models, with the main objective of improving the accuracy of flood predictions and sensor placement. Four distinct deep learning models are used to …

Optical Sensor Instrumentation For Enhanced Continuous Caster Development, Hanok Wondimagegnehu Tekle

Doctoral Dissertations

Fiber-optic sensors are an emerging technology that can enhance process monitoring and control in steelmaking. They are especially valuable in the continuous caster’s harsh environment. This dissertation presents the industrial application and demonstration of three sensor types: single-mode silica fiber with Rayleigh-based Optical Frequency Domain Reflectometry (OFDR), sapphire fiber (single-crystal alumina) with Fiber Bragg Gratings (sFBG), and an in-line Raman spectroscopy probe. Each sensor served a distinct role in the continuous caster. Rayleigh OFDR sensors were embedded in tundishes for distributed thermal mapping at 7-mm spatial resolution across ≈4 m. Measurements were taken during preheating, casting, and ladle exchanges, and …

Radio Frequency Wave Propagation Modeling Within Obstructed Underground Mining Environments For Effective Miner Localization During Mine Emergencies, Emmanuel Atta Antwi

Doctoral Dissertations

The reliability of underground wireless communication systems remains a significant challenge, particularly during emergencies when the mine environment becomes severely obstructed by debris, dust, and humidity. These environmental and geometric conditions result in significant attenuation of electromagnetic (EM) waves and multipath effects that undermine miner localization and rescue operations. Existing Vector Parabolic Equation (VPE) models are efficient for straight or mildly curved tunnels but fail to account for the random and obstructive conditions typically encountered during underground emergencies. This research develops a novel radio propagation model for EM wave behavior in underground mine drifts under geometrically obstructed conditions. The model …

Advancing Thermodynamic Modeling In Materials Design: From Phase Stability In Metallic Systems To Ferroelectric Property Prediction In Functional Oxide, Kyaw Hla Saing Chak

Doctoral Dissertations

This dissertation advances the CALPHAD (CALculation of PHase Diagrams) approach for thermodynamic modeling which often lacks sufficient description of crystal lattices for critical phases in multicomponent system. Additionally, CALPHAD does not consider the structural features and its connection with functional properties for functional materials. To address these issues, a novel dual-ordered sublattice model for the κ-phase in Fe-Al-C system, (Fe,Al)3(Fe,Al)1(C,Va)1(C,Va)3, is introduced that improves predictions of equilibrium compositions and phase stability by accounting for both substitutional and interstitial ordering. For the Fe-B-C system, new sublattice formulations for FCC [(Fe)1(C,B,Va)1] and BCC [(Fe,B)1(C,B,Va)3], phases enhance boron solubility predictions and reveal insights …

Atmospheric Transport Of Radionuclides, Meteorological Data Mining & Synthesis For Site Data Supplementation, Ben Yao Sonpon

Doctoral Dissertations

"This research aligns with the NRC's vision of implementing risk-informed decision-making to support its regulatory charter. The suite of tools developed includes automated procedures for data mining and extracting meteorological (met) data from various national and regional repositories. A second data analytics tool automates the process of data fusion into a uniform format while preserving data fidelity. Autocorrelations were then established, and correlation coefficients were calculated between the Callaway Nuclear Power Plant (Callaway) and nearby off-site weather stations. The complexity of these correlations depends on factors such as physical proximity, geographic features, and topology, potentially necessitating multivariate analysis (MVA). Furthermore, …