Digital Commons Network^™

Future Climate Analysis -- 10,000 Years To 1,000,000 Years After Present, Saxon E. Sharpe, Dwight Hoxie, Amy J. Smiecinski

Publications (YM)

The purpose of this report is to provide quantified estimates of temperature and precipitation and estimate the timing of climate states in the Yucca Mountain, Nevada, area for the period from 10,000 to 1,000,000 years beyond the present. Primary tasks are limited to: 1) selecting modern analog climate stations for three different magnitude glacial stages; and, 2) determining the timing of future climate states using orbital parameter data and Devils Hole and Owens Lake records. These estimates are intended to be used as input to models of the infiltration process to assess the performance of the natural and engineered systems …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

During the past two years (2001-2002) of this project, the primary effort was focused on evaluating the effect of hydrogen on the cracking behavior of candidate target materials namely, Alloys EP-823, HT-9 and 422 in aqueous environments of different pH values at ambient and elevated temperatures. More recently, emphasis is being placed to evaluate the cracking behavior of these materials in molten lead-bismuth eutectic (LBE) environment at much higher testing temperatures so as to compare the cracking susceptibility in environments containing molten metals and aqueous solutions, respectively. The most recent tests to evaluate the cracking susceptibility were primarily based on …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report 12/1/02- 2/28/03, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.

Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.

The first subtask of this project involves using a …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada, Las Vegas (UNLV) and the Idaho State University (ISU) is to evaluate the feasibility of determining residual stresses of welded, bent (three-point-bend), and cold-worked engineering materials using a new nondestructive technique based on positron annihilation spectroscopy. The proposed technique is to use x-rays from a small MeV electron Linac to generate positrons inside the sample via pair production. This method can be used for materials characterization and investigation of defects in thick samples that could not be accomplished by conventional positron technique or other nondestructive methods. The data …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

UNLV has developed and will continue to develop process models for the analysis of melt casting processes. This work will continue to be performed under the guidance of Argonne National Laboratory (ANL) engineers to insure that their knowledge and experience benefits the project. The research to be conducted during year three will center on performing detailed analyses on a conceptual design of an inductively heated skull-crucible casting furnace. Processing conditions will be analyzed, basic models utilized, and detailed heat and mass transfer models will be developed to analyze the most promising processes. The goal of this third year is to …

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a spallation target and as a blanket coolant. There have been previous studies of LBE, especially by the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The Russians found that the presence of small amounts (ppm) of oxygen in the LBE significantly reduced corrosion. However, a fundamental understanding and verification of its role in the corrosion of steels is still very incomplete. …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 11/16/02- 2/15/03, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the TRP Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral …

University Of Nevada, Las Vegas Transmutation Research Program: Quarterly Report, Second Quarter Year 2 (June 2002 To August 2002), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Transmutation Research Program (TRP) Director to the U.S. Department of Energy (DOE) as described in the UNLV Advanced Accelerator Applications (AAA) proposal, and AAA FY02 Work Package. Note: during this quarter, the AAA national program changed names to the Advanced Fuel Cycle Initiative (AFCI) and the UNLV AAA University Participation Program changed its name to the Transmutation Research Program. The new names will be used in future references.

The TRP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies …

Perspectives On Radioactive Waste Disposal: A Consideration Of Economic Efficiency And Intergenerational Equity, Helen R. Neill, Robert H. Neill

Public Policy and Leadership Faculty Research

There are both internal and external pressures on the U.S. Department of Energy to reduce the estimated costs of isolating radioactive waste, $19 billion for transuranic waste at Waste Isolation Pilot Plant (WIPP) and $57 billion for high level waste at Yucca Mountain. The question arises whether economic analyses would add to the decision-making process to reduce costs yet maintain the same level of radiological protection. This paper examines the advantages and disadvantages of using cost-benefit analysis (CBA), a tool used to measure economic efficiency as an input for these decisions. Using a comparative research approach, we find that CBA …

Corrosion Of Steel By Lead Bismuth Eutectic: Quarterly Report November- December 2002 January 2003, John Farley

Transmutation Sciences Materials (TRP)

We continue to get valuable data from sputter depth profiling of steel samples. We meet weekly to discuss progress. We took depth-profiling data on D9 steel that had been exposed to LBE. This the first time we have examined this type of steel. This is important because it will enable us to separate out two effects and determine their effect on corrosion: composition of the steel vs surface preparation.

We started to plan a small experiments using a crucible of heated LBE, with the research program to be conducted at UNLV, on basic aspects of corrosion in this system. The …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (Nov. 01 – Jan. 31, 2002), Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

The design of the new apparatus for oxygen measurement/calibration has been completed. This new apparatus shall be of great importance for the UNLV researchers to conduct the research work in the campus.

An Analysis Of The Melt Casting Of Metallic Fuel Pins, Xiaolong Wu, Randy Clarksean, Yitung Chen [email protected], Darrell Pepper, Mitchell K. Meyer

Fuels Campaign (TRP)

• Background

– Casting Volatile Actinides

– Need to Contain Americium

– Overview of Project

• Fuel Rod Model

– Physical System

– Governing Equations

• Preliminary Modeling Results

– Mold Materials

– Injection Casting Velocity

Development Of A Systems Engineering Model Of The Chemical Separations Process, Lijian Sun, Haritha Royyuru, Yitung Chen, Randy Clarksean, Darrell Pepper, George Vandegrift, James Laidler

Separations Campaign (TRP)

Project Overview:

• Two Components

– Refine AMUSE Code

– Develop Systems Engineering Model

• Research Objectives

– Develop a framework and environment for a systems engineering analysis of the chemical separations system for the AAA program.

– Establish a baseline systems engineering model from which modifications and improvements can be made.

– Refine the existing AMUSE program that gives a detailed examination of the UREX process, a critical component of the overall separation scheme.

Calibration Of Ysz Sensors For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Xiaolong Wu, Ramkumar Sivaraman, Ning Li, Wei Hang, T. W. Darling, Yingtao Jiang, Woosoon Yim, Bingmei Fu

Transmutation Sciences Materials (TRP)

Although liquid lead-bismuth eutectic (LBE) is a good candidate for coolant in the subcritical transmutation blanket, it is known to be corrosive to stainless steel, the material of the carrying tubes and containers. Such longterm corrosion problem can be prevented by producing and maintaining a protective oxide layer on the exposed surface of stainless steel. For this purpose, it is required to accurately control the concentration of oxygen dissolved in LBE. Currently, YSZ (Yttria Stabilized Zirconia) oxygen sensors, based on an existing automotive oxygen sensor, with molten bismuth saturated with oxygen as the reference, have been selected for oxygen-concentration measurement. …

Semi-Analytical Stochastic Study Of Radionuclide Transport In The Saturated Zone Below Yucca Mountain, Xiaolong Hu, Craig Shirley, Jichun Wu, Hai Huang

Publications (YM)

The objective of this study is to predict radionuclide solute transport process in the saturated zone below the Yucca Mountain project area. Based on a stochastic perturbation approach, a numerical method of moments has been developed and used to predict the mean, variance and upper bound of the radionuclide mass flux through a control plane 5-km downstream of the footprint of the repository. This study enhances the analysis of the effect of medium’s heterogeneity on solute transport prediction, especially on prediction uncertainty.

"Some Of Us Are Learning Spanish And Some Of Us Are Learning English": A Comparison Of Second Language Programs In Texas, Lore Carrera-Carrillo

UNLV Retrospective Theses & Dissertations

Dual language education programs are gaining momentum throughout the United States as exemplary means of educating both language minority and language majority students. There is considerable evidence that learning through the native language has many advantages for language minority students. Specifically, it allows them to gain important content knowledge in their native language that will make the English they encounter more comprehensible as they enhance their overall cognitive and social development. Additionally, dual language education facilitates the development of both basic and advanced literacy in two languages for language majority students; Research results demonstrate that dual language education programs can …

Characterization Of A Missle Flyout Simulation, Russell Louis Tinsley

UNLV Retrospective Theses & Dissertations

This thesis develops a systematic approach to exploring the response of a missile flyout software simulation to input noise. The research is intended to augment the current characterization tests employed by the Electronic Warfare Testing community. This thesis explores the direct relationship between specific input noise signals and individual simulation responses. The design defines an approach for characterizing the behavior of a deterministic simulation of tremendous complexity by controlling test conditions. Techniques for generating realistic random noise are derived. A statistical model of the relationship between input noise missile miss distance at the point of closest approach is presented. The …

Evaluation Of Performance Of Non-Parametric Confidence Intervals On Skewed Data, Monica Solis

UNLV Retrospective Theses & Dissertations

In this thesis we will develop a method for the construction of a non-parametric confidence interval and compare it to parametric confidence intervals for the mean of a population distribution. Using Monte Carlo simulation, we will examine the performance of both confidence intervals on data from different types of distributions. In particular, we are interested in examining how these confidence intervals perform when the data is known to come from a skewed distribution. Our goal is to illustrate the superiority of our new method against a traditional parametric approach for estimating parameters, particularly on skewed data.

Multiple Voltage Scheme With Frequency Variation For Power Minimization Of Pipelined Circuits At High-Level Synthesis, Bharath Radhakrishnan

UNLV Retrospective Theses & Dissertations

High-Level Synthesis (HLS) is defined as a translation process from a behavioral description into structural description. The high-level synthesis process consists of three interdependent phases: scheduling, allocation and binDing The order of the three phases varies depending on the design flow. There are three important quality measures used to support design decision, namely size, performance and power consumption. Recently, with the increase in portability, the power consumption has become a very dominant factor in the design of circuits. The aim of low-power high-level synthesis is to schedule operations to minimize switching activity and select low power modules while satisfying timing …

Quantifying Ecosystem Geomorphology Of The Southern Appalachian Mountains, Scott R. Abella

Public Policy and Leadership Faculty Research

Geomorphology is a dominant factor influencing vegetation distribution in the southern Appalachians, and quantifying landform characteristics is increasingly important for forest ecosystem classification. This study used slope gradient and two previously published geomorphic indices, terrain shape index and landform index that quantify landform shape and protection, to develop a field-based landform quantification system at four study areas in the southern Appalachians. Six major landform types (ridgetops, nose slopes, linear hillslopes, coves, stream ravines, and stream bottoms) exhibited quantitatively different characteristics, and these differences among landforms were not evident when using only categorical landform descriptions (e.g., convex, concave) that have been …

Perspectives On Economic Analyses For High Level Waste Disposal, Helen R. Neill, Robert H. Neill

Public Policy and Leadership Faculty Research

There are both internal and external pressures on the U.S. Department of Energy (DOE) to reduce costs of disposal and still maintain radiation protection to both present and future generations. The question arises whether both of these goals are attainable.

Financing An Adequate Education: A Case Study Of New York, William D. Duncombe, Anna Lukemeyer, John Yinger

Public Policy and Leadership Faculty Research

The development of any adequacy based school finance system involves three components, which correspond to the three substantive sections of this paper:

First, a state must select measures of adequacy, either in terms of resources or student performance. Such measures are necessary to identify school districts below the standard. Although these measures can be controversial and difficult to develop, this choice is unavoidable.

Second, a state must estimate the cost of reaching a given performance standard in each district. The cost function approach presented in this study relies on statistical methods to extract from actual data the impact of student …

Radiation Transport Modeling Using Parallel Computational Techniques, William Culbreth

Reactor Campaign (TRP)

The Advanced Fuel Cycle Initiative (AFCI) program will rely on the use of accurate calculations and simulations of criticality and shielding for the separation process of the longlived isotopes that present a significant safety hazard in commercial spent fuel. To help design and verify the safety of the separation process, the neutronics code MCNPX will be used to model the distribution of neutron flux within the fuel blanket and to determine the neutron multiplication, k_eff. However, the cross section libraries and computational methods used by MCNPX at these neutron energies still have some uncertainty and will require validation. …

Radiation Transport Modeling Using Parallel Computational Techniques, William Culbreth, Denis Beller

Reactor Campaign (TRP)

The second year of this project involved modeling several aspects of the LANCSE beam experiments:

• Modeling targets of varying diameter in air, in a vacuum, and in the presence of humid air;
• Modeling various proton beam profiles;
• Modeling the effects of off-axis proton beam impingement on the target;
• Modeling the asymmetry introduced by the steel table below the target;
• Modeling the effect of varying ratios of Pb to Bi and the effect of impurities; and
• Modeling the system, including other structures within the test room.

With the experience gained through modeling these systems, the UNLV researchers plan, with the assistance …

Monte Carlo Verification And Modeling Of Lead-Bismuth Spallation Targets, Daniel R. Lowe

Reactor Campaign (TRP)

No abstract provided.

University Of Nevada, Las Vegas Transmutation Research Program Annual Report 2002, Anthony Hechanova, Elizabeth Johnson, Gary Cerefice

Transmutation Research Program Reports (TRP)

The UNLV Transmutation Research Program consists of four components: Program Support, Research Infrastructure Augmentation, International Collaboration, and Student Research.

In the first year of the program, the student research component was supported by the infrastructure augmentation and the program support components. In the second year of the program, the fourth leg of the support system, international collaborations, was added to the research support system.

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

Materials for transmuter systems must be able to tolerate high neutron fluxes, great temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge in that the corrosive behaviors of materials in LBE are not well understood. Most of the available information on LBE systems has come from the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The Russians found that the presence of small amounts of oxygen (on the order of parts per million) in the LBE significantly reduced corrosion. However, a fundamental understanding and verification of its …

Surface Studies Of Corrosion Of Stainless Steel By Lead Bismuth Eutectic, Daniel Koury, Brian D. Hosterman, John Farley, Dale L. Perry, D. Parsons, J. Manzerova, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Why is Lead Bismuth Eutectic Important?

• Changing national security stances have led to reexamination of nuclear waste reprocessing

• Dangerous actinides can be separated and

• Transmuted into safer products, creating a waste form dangerous for only hundreds of years, in addition to the production (up to 1/3 of the original fission energy) of useful energy

• Non-moderating coolants or spallation targets for production of fast neutrons is required for transmutation

• Russian experience with LBE coolants in their nuclear submarine fleet makes LBE an attractive possible transmutation coolant technology

• Corrosion of steel by LBE is an important …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy, Brendan O'Toole, Zhiyong Wang, David W. Hatchett

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the potential for the environmentally-assisted cracking of candidate target materials for applications in spallation-neutron-target systems, such as accelerator-driven system for the transmutation of waste. The materials selected for evaluation and characterization are martensitic stainless steels (SS) including Alloys HT- 9, EP 823 and Type 422 stainless steel.

More recently, this experimental program has been expanded to evaluate the effect of molten lead-bismuth eutectic (LBE) on the corrosion behavior of target materials in the presence of oxygen. Since the materials performance laboratory (MPL) at UNLV currently cannot accommodate this type of testing, …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The corrosion of structural materials is a major concern for the use of lead-bismuth eutectic (LBE) systems for nuclear applications such as in transmuter targets or fast reactors. Corrosion in liquid metal systems can occur through various processes, including, for example, dissolution, formation of inter-metallic compounds at the interface, and penetration of liquid metal along grain boundaries. Predicting the rate of these processes depends on numerous system operational factors: temperature, system geometry, thermal gradients, solid and liquid compositions, and velocity of the liquid metal, to name a few. Corrosion, along with mechanical and/or hydraulic factors, often contributes to component failure. …