Digital Commons Network^™

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (September 1 – November 30, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including HT- 9, EP 823 and 422. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these alloys will be evaluated in environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. The extent and morphology of cracking of these alloys will further be evaluated …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823: Task 10, First Quarter Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The objective of this task is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. The test material will be thermally treated prior to evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface analytical techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The overall results are expected to provide a mechanistic understanding of high-temperature deformation behavior of Alloy EP-823 as a function of heat treatment.

Highlights of Accomplishment

• …

Modeling, Fabrication, And Optimization Of Niobium Cavities – Phase I: Quarterly Progress Report August 20, 2001 - November 20, 2001, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in rf superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch. A nonuniform surface etch will leave some unclean areas with contaminants and micron size particles. These significantly affect mutipacting. Further, a nonuniform etch will leave areas with damaged grain structure, which is not good for superconducting properties. Typically, the depth of chemical …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

We examined stainless samples that were exposed to LBE in experiments conducted by the Russians, under contract to Los Alamos. We examined both corroded and uncorroded samples using the Scanning Electron Microscope (SEM), the Energy Dispersive X-Ray (EDAX) Spectroscopy, and the X-ray Photoelectron Spectrometer (XPS). We found that the surface of the corroded sample is covered by oxygen-containing compounds, presumably mostly iron oxide. In samples exposed for shorter times or lower temperatures, we found that some areas were covered by an oxide layer, and some areas was uncovered. We found that the level of Cr in the uncovered area is …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report August 16,2001- November 15, 2001, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.

Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.

The first subtask of this project involves using a …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AAA program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme.

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible. The process involves evacuation of the furnace. The evacuation of the furnace also evacuates quartz rods used as fuel pin molds. Once evacuated the open ends of the molds are lowered into the melt; the casting furnace is then rapidly pressurized, forcing the molten metal up into the evacuated molds where solidification occurs.

This process works well …

Rtc3 Transportation Model Version 1.0 Created In Support Of The Regional Transportation Commission Community Coalition, Krystyna Anne Stave

Public Policy and Leadership Faculty Research

No abstract provided.

Influence Of Lithophysal Porosity On Stress-Strain Properties Of Topopah Spring Tuff - Numerical Analysis, Nick Hudyma, Moses Karakouzian, Amy J. Smiecinski

Publications (YM)

The purpose of the numerical analysis effort of Task 27 of cooperative agreement DE-FC08-98NV12081 was to investigate the effect of lithophysal porosity on the elastic stress-strain properties of the tuff rock mass. Rock mass properties without lithophysal cavities are designated matrix properties. Rock mass properties with lithophysal cavities are designated effective properties. The analysis will be performed for a 6" by 6" square cross-section with a uniform distribution of lithophysal cavities for a variety of porosities. The analyses will be performed using FLAG 2D version 3.5, a Department of Energy qualified software. The analyses will compare the matrix properties to …

Inside Unlv, Betty Blodgett, Tom Flagg, Diane Russell

Inside UNLV

No abstract provided.

Seismicity In The Vicinity Of Yucca Mountain, Nevada, For The Period October 1, 1999 To September 30, 2000, David H. Von Seggern, Ken Smith, James N. Brune, Richard Quittmeyer, Amy J. Smiecinski

Publications (YM)

Starting on October 1, 1995, the monitoring of seismicity within the southern Great Basin near Yucca Mountain was performed with a new digital network. This network features three-component recording with 24-bit A/D conversion in the field. Continuous data are collected at 20 sps, and event triggered windows are collected at 100 sps. A seismic bulletin of events is made by automatically associating triggers among stations, classifying the local earthquake events, and locating the earthquakes and computing their magnitudes with conventional methods. This report covers the operational and seismic results of the fifth full year (FYOO) of the improved, digitally based, …

Assessment Of Criticality Safety For Cylindrical Containers To Be Used In The Processing Of Spent Fuel, William Culbreth, Daniel R. Lowe, Jason Viggato

Separations Campaign (TRP)

The UREX process separates uranium from transuranic wastes (TRU) and fission products (FP). Nuclear reactors require fissile isotopes that will absorb neutrons and break apart into smaller nuclei while releasing a large amount of energy as well as multiple neutrons. Fissile isotopes in spent fuel include not only ²³⁵U, but also ²³⁹Pu, ²⁴¹Pu, and several isotopes of americium (Am) and curium (Cm).

TRU contains the actinides with atomic numbers greater than that of uranium. This includes Pu, Np, Am, and Cm. When TRU is separated from uranium, the TRU still poses a significant risk of sustaining a …

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report, Second Quarter (June To August 2001), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) Director to the U.S. Department of Energy (DOE) as described in the UNLV AAA proposal.

The UNLV AAA UPP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies (HRC) to ensure that work conducted under the UNLV AAA UPP meets program objectives. The UNLV AAA UPP consists of three components: Program Administration, Research Infrastructure Augmentation, and Student Research.

Inside Unlv, Andy Grossman, Mark Wallington, Dave Phillips

Inside UNLV

No abstract provided.

Unlv Magazine, Barbara Cloud, Laurie Fruth, Mae Worthey-Flennoy

UNLV Magazine

No abstract provided.

Acquired Immuno-Deficiency Syndrome (Aids) And Human Immuno-Deficiency Virus (Hiv) In Nevada – Annual Surveillance Report (1999), Mary Guinan, Nancy Kreher, Drew Mather, Wei Yang

School of Public Health Faculty Research

Background:

Acquired Immuno-Deficiency Syndrome (AIDS) is the most severe manifestation of Human Immunodeficiency Virus (HIV) infection. AIDS was first reported in the world in 1981 by the Centers for Disease Control and Prevention. Statewide surveillance for AIDS was begun in 1982. Because the cause of AIDS was unknown at that time, the surveillance case definition included many opportunistic infections and tumors. Persons with AIDS were noted to have abnormalities in their immune system that left them susceptible to certain infections. As more information became available, the AIDS surveillance case definition was modified.

In 1984, HIV was found to be the …

Practice Makes Perfect (Or, At Least Better!), P. S. Mcmillen

Library Faculty Research

I teach people to use library resources more effectively; however, the skills I’ll talk about below are useful when working with any adult audiences. This is not a comprehensive guide to teaching or public speaking, rather, it is a summary of some of the main ideas and practices that help me. I used to be so scared when I talked in front of other people — even a small group of people — that I would turn bright red and break out in a sweat. I couldn’t look people in the eye; I read from my notes; I stumbled over …

Dynamical Relativistic Effects In Photoionization: Spin-Orbit-Resolved Angular Distributions Of Xenon 4d Photoelectrons Near The Cooper Minimum, H. Wang, G. Snell, Oliver Hemmers, M. M. Sant'anna, I. A. Sellin, N. Berrah, Dennis W. Lindle, P. C. Deshmukh, N. Haque, S. T. Manson

Environmental Studies Faculty Publications

Two decades ago, it was predicted [Y. S. Kim et al., Phys. Rev. Lett. 46, 1326 (1981)] that relativistic effects should alter the dynamics of the photoionization process in the vicinity of Cooper minima. The present experimental and theoretical study of the angular distributions of Xe 4d_3/2 and 4d_5/2 photoelectrons demonstrates this effect for the first time. The results clearly imply that relativistic effects are likely to be important for intermediate- Z atoms at most energies.

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (June 1 – August 31, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The subject task entitled “Hydrogen-Induced Embrittlement of Candidate Target Materials for Applications in Spallation-Neutron-Target Systems” had commenced during the quarter ending on August 31, 2001. A research account has been established, contracts for both faculty and students have been prepared, and efforts are well underway to embark on the related research activities, as proposed.

As the title of this project implies, the primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallationneutron- target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). …

Inside Unlv, Carol C. Harter, Betty Biodgett

Inside UNLV

No abstract provided.

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Report 5/15/01-8/15/01, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

No abstract provided.

Women's Research Institute Of Nevada Newsletter, Joanne Goodwin, Women's Research Institute Of Nevada

Newsletters

No abstract provided.

Modeling, Fabrication, And Optimization Of Niobium Cavities – Phase I: Quarterly Progress Report May 15, 2001 - August 15, 2001, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in rf superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch compromising the optimal geometrical design. Past multipacting studies have not examined the impact of wall perturbations.

It is the purpose of this study to examine the chemical etching process in the design of niobium cavities so to maximize the surface quality of …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal is to achieve a basic understanding of the corrosion of stainless steel by Lead Bismuth Eutectic (LBE), which has been proposed for use in the transmuter as both a coolant and as a sputtering target.

Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project, William Culbreth

Reactor Campaign (TRP)

The AAA program will rely on the use of an accelerator-based transmuter to expose spent nuclear fuel to high-energy neutrons. The neutron flux will be sufficient to activate or fission the long-lived isotopes of Tc, I, Pu, Am, Cm, and Np that present a significant safety hazard in commercial spent fuel. Transmuter fuel will be subcritical and a high-energy proton accelerator is needed to maintain the necessary neutron flux through the use of a neutron spallation target. The maximum neutron energy produced by spallation (~ 600 MeV) is significantly higher than that produced by a commercial light water reactor (~ …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The objective of this project is the design and evaluation of manufacturing processes for transmuter fuel fabrication. A detailed design description for the manufacturing of each candidate fuel type would support the informed selection of fuel for a transmutation system. We will collect pertinent manufacturing and process-related information and create an information database that will document the design, operations, and cost implications of various fuel choices. Fabrication processes for different fuel types will likely differ in terms of equipment types, throughput, and cost.

Year 1 of the project will be devoted to the analysis and assessment of the multiple steps …

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Pang Tao

Separations Campaign (TRP)

To mitigate the waste created by conventional fission reactors, spent nuclear fuel must be mechanically separated from its cladding. For the development of fuel processing technology to support the Advanced Accelerator Applications (AAA) Program, aqueous and pyrochemical processes will be used to further separate technetium and iodine, uranium and the higher actinides (see Figure 1 for an example of the process layout)1. The higher actinides, including plutonium, americium, curium, and neptunium will be separated from the waste to facilitate their fabrication into new fuel for placement in a transmuter. High-energy neutrons generated by spallation in the transmuter break down these …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP- 823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. However, very little data exist in the open literature on the tensile properties of this alloy. The selection of Alloy EP-823 as the test material in the proposed task is based on the recommendation of our collaborator at the Los Alamos National Laboratory (LANL). The test material will be thermally treated …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Randy Clarksean

Separations Campaign (TRP)

Two activities are proposed: the development of a Systems Engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model will be the start of an integrated approach to the analysis of the materials separations associated with the national AAA program. A second portion of the project will streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to the systems engineering …

Ascent And Decompression Of Viscous Vesicular Magma In A Volcanic Conduit, Helene Massol, Claude Jaupart, Darrell Pepper

Mechanical Engineering Faculty Research

During eruption, lava domes and flows may become unstable and generate dangerous explosions. Fossil lava-filled eruption conduits and ancient lava flows are often characterized by complex internal variations of gas content. These observations indicate a need for accurate predictions of the distribution of gas content and bubble pressure in an eruption conduit. Bubbly magma behaves as a compressible viscous liquid involving three different pressures: those of the gas and magma phases, and that of the exterior. To solve for these three different pressures, one must account for expansion in all directions and hence for both horizontal and vertical velocity components. …