Digital Commons Network^™

Physics, Chapter 44: Stable Nuclei, Henry Semat, Robert Katz

Robert Katz Publications

Atomic and nuclear physics are essentially twentieth-century developments, although these had their origins at the close of the nineteenth century. These developments followed two parallel streams, as shown in Figure 44-1, one dealing with the electronic structure of the atom and the other dealing with its nuclear structure. These two streams served to feed each other and were fed by all other branches of physics, but only a few of the more important contributions concerning the nature of radiation, matter, and energy are shown in the figure.

Physics, Chapter 43: X-Rays, Henry Semat, Robert Katz

Robert Katz Publications

The study of the electric discharge through gases led directly to the discovery of x-rays by W. C. Roentgen in 1895. While operating a gas discharge tube, Roentgen observed that a platinum-barium cyanide screen at some distance from the tube fluoresced. He shielded the tube so that no visible radiation could reach the screen, but the fluorescence could still be observed. On interposing various materials between the tube and the screen, he found that the intensity of the fluorescence could be diminished, but that it was not completely obliterated. He interpreted these observations as being due to radiation coming from …

Physics, Chapter 42: Optical Spectra And Atomic Structure, Henry Semat, Robert Katz

Robert Katz Publications

When light passes through a prism spectroscope or a diffraction-grating spectroscope, an optical spectrum is obtained in which the intensity of the radiation may be analyzed as a function of wavelength. The spectrum may be observed visually in the limited wavelength region to which the eye is sensitive; it may be focused on a photographic plate or upon a thermocouple or thermopile. Our knowledge of the structure of atoms and molecules is largely dependent upon the analyses of optical spectra, for these spectra are characteristic of the emitting atoms or molecules. Even before the spectra of atoms were properly understood …

Physics, Chapter 41: Polarized Light, Henry Semat, Robert Katz

Robert Katz Publications

The phenomena of interference and diffraction show that light is propagated as a wave motion, but they do not show whether light is a longitudinal wave or a transverse wave. The fact that the velocity of light is the same as the velocity of radio waves and the radiation of visible light from accelerated electrons, as in a betatron, indicates that light is an electromagnetic wave. We recall from Section 20-9 that a wave can be shown to be transverse if a device can be found which will prevent passage of the wave in one orientation and will allow the …

Physics, Chapter 40: Light As A Wave Motion, Henry Semat, Robert Katz

Robert Katz Publications

Let us recount some of the characteristics of the motion of particles and the propagation of waves, with a view toward analyzing the behavior of light. In accordance with Newton's first law, a particle moves in a straight-line path in the absence of external forces. Thus we might infer, as Newton suggested, that light is composed of particles, and that, in a continuous medium, there is no deflecting force on the light particles. At the interface between two media, light may be propagated in a straight line parallel to the interface. Thus even at an interface there is no force …

Physics, Chapter 38: Mirrors And Lenses, Henry Semat, Robert Katz

Robert Katz Publications

A spherical mirror consists of a small section of the surface of a sphere with one side of the surface covered with a polished reflecting material, usually silver or aluminum. If the outside, or convex surface, is silvered, we have a convex mirror; if the inside, or concave surface, is silvered, we have a concave mirror, as shown in Figure 38-1. Most mirrors used commercially are made of glass, with the rear surface silvered and then coated with a layer of paint or lacquer for protection. Mirrors for astronomical telescopes (')f other accurate scientific work are provided with a reflective …

Physics [Complete Work], Henry Semat, Robert Katz

Robert Katz Publications

This book is intended for students of science and engineering; it aims to develop both an understanding of the important concepts of physics and some analytical skill in the solutions of problems. The mathematical level of the book is such that it may be used by students who are taking a course in calculus concurrently.

The notations and methods of the calculus are introduced early in the text, beginning with the concept of a derivative in the discussion of motion, and are then extended to more complex problems as the student progresses both in physics and in mathematics. Vector algebra …

The Doctrine Of Recrimination In Nebraska, Janice L. Gradwohl

Nebraska Law Review

I. Historical Background

II. A Collateral Concept—Comparative Rectitude

III. Recrimination in Nebraska … A. The Statute … B. The Cases … 1. The Comparative Rectitude Theory … 2. The Hybrid Comparative Rectitude-Recrimination Theory … a. The Blameless Party Approach … b. The Social Welfare Approach … 3. The Traditional View … 4. The Statutory Approach

IV. Other Jurisdictions … A. Statutory Provisions … B. The Cases … 1. The American Majority View … 2. The Michigan Cases … 3. The Wyoming Cases … 4. The English View … 5. The American Minority View

V. A Critical Analysis of the Doctrine …

Determining The Fair Market Value Of Oil And Gas Interests, C. E. Wright

Nebraska Law Review

I. Introduction … A. Estate Tax Code … B. Gift Tax Code … C. Regulations … D. Scope

II. Methods of Valuation … A. Where No Method Is Mentioned … B. Value from Sales of Same Property … C. Value from Other Property in the Area … D. Value from Analytical Appraisal … E. Estimates of Recoverable Reserves … F. Volumetric or Saturation Method … G. Decline Curve Method … H. Marketing … I. Pricing … J. Costs … K. Taxes … L. Present Value

III. Conclusion

The Fishery Of An Alkaline Sandhill Lake, Nebraska, D. B. Mccarraher

Nebraska Game and Parks Commission: White Papers, Conference Presentations, and Manuscripts

The sandhill region of Nebraska is a plains regions that has been excessively modified by the force of wind. It is an area of partially changed environment through wind action, an area of dune sandhills, sandy basins and valleys, exposed ground water lakes and marshes, and possessing little surface runoff.

Nebraska Groundwater Level (Decline & Rise) As Of December 1957., E. C. Reed

Conservation and Survey Division: Faculty and Staff Publications

No abstract provided.

Effect Of Change In Moment Of Inertia On The Intensity Distribution In P And R Branches Of C OoV Molecules, Gordon A. Gallup

Gordon Gallup Publications

The effect of the change in moment of inertia part of the interaction between vibration and rotation on the intensities of parallel bands of linear polyatomic molecules has been determined to the first order. The results are quite similar to those of Herman and Wallis for diatomic molecules. The interaction term depends on among others a quantity, ξ _k, different in general for each band. Perpendicular bands do not show a first-order correction. A ``sum rule'' for the ξ _k has been determined.

Test 636: Allis-Chalmers D-17 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: ALLIS-CHALMERS D-17 DIESEL TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 635: Allis-Chalmers D-17 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: ALLIS-CHALMERS D-17 GASOLINE TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 633: Oliver Oc-15 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: OLIVER OC-15 DIESEL

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 628: Eimco 105 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: EIMCO 105 DIESEL TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 627: Ford 640-L, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: FORD 640-L TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: …

Test 626: Ford 850-L, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: FORD 850-L TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: …

Test 629: International Td-18 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: INTERNATIONAL TD-18 DIESEL TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 631: Wagner Tr-9 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: WAGNER TR-9 DIESEL TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 634: International 330 Utility Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: INTERNATIONAL 330 UTILITY GASOLINE TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 630: International Td-24 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: INTERNATIONAL TD-24 DIESEL TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 632: John Deere 820/830, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 820/830 TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Preliminary Estimate Of The Underflow Across The South Dakota-Nebraska State Line In The Niobrara River And Ponca Creek Drainage Basins, E. C. Reed, C. F. Keech

Conservation and Survey Division: Faculty and Staff Publications

The purpose of this paper is to estimate the amount of ground water flowing across the South Dakota-Nebraska State line within the Niobrara River basin, including the Ponca Creek basin. The study was made at the request of the Niobrara River Compact Commission. The estimates fiven in the paper are preliminary and subject to revision.

Industrial Wastes: Bio-Assays For Control Of Industrial Effluents, Croswell Henderson, Clarence M. Tarzwell

United States Environmental Protection Agency: Publications

Waste effluents from many industries are toxic to fish and other aquatic life. The control or treatment of these wastes for safe release into receiving waters presents a problem of consider able magnitude.

Much effort has been expended by some industries to solve this problem, primarily through chemical analysis for possible toxic components and then generally by a search of the literature to find out how toxic a particular component may be. Unfortunately, this approach has not been successful, nor can it be expected to be productive of satisfactory answers.

Test 625: Someca Som 45 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: SOMECA 45 DIESEL TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 624: Minneapolis-Moline 335 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: MINNEAPOLIS-MOLINE 335 GASOLINE TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 623: Allis-Chalmers D-14 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: ALLIS-CHALMERS D-14 GAS TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

A Differential Counting Rate Meter For Low Counting Rates, James J. Schmidt

Open Access Master's Theses (through 2010)

A counting rate meter was constructed after a circuit suggested by Harald Trefall, with a power supply after Elmore.The instrument was tested and proved quite stable after operating for several weeks.The response of the instrument was calculated and the experimental results verified the calculations.Methods of calibration and operation of the instrument were developed to obtain the full benefit of its design.A set of calibration curves was obtained from the counting rate meter and a suggestion for their use in interpreting the output was made.

The research resulted in the construction of an instrument with the following specifications:

Maximum Counting Rates: …

The Enzymatic Synthesis And Disproportionation Of Galactosyl Oligosaccharides, Carl L. Tipton

Open Access Master's Theses (through 2010)

It was the purpose of this experiment to obtain unequivocal evidence for the suggested structures of the new oligosaccharides and to obtain evidence in support of the transgalactosylation mechanism of action of the enzyme studied.

Five of the galactosyl oligosaccharides produced during the hydrolysis of lactose by an enzyme prepared from Saccharomyces fragilis have been isolated in chromatographically pure form.The three having the highest chromatographic mobilities have been shown to be 3-0-β-D-galactopyranosyl-D-glucose, 6-0-β-D-galactopyranosyl-D-glucose and 6-0-β-D-galactopyranosyl-D-galactose.The positions of the glycosidic linkages in these compounds were determined by use of the lead tetra-acetate oxidation procedure.These three disaccharides have been characterized by measurement …