Digital Commons Network^™

Test Of The Additive-Dominance Model Of Grain Weight And Grain Uniformity Of Oat, Avena Sativa L, Genotypes, Sowm Reuben

Tanzania Journal of Science

An investigation of the genetic mechanisms controlling grain weights for the primary and secondary grains uniformity expressed in primary: secondary individual grain weight (P: S IGW) ratio and % tertiary grains produced was conducted using a backcross experiment'. Two oat, parental genotypes, I.L82-1657 (pistillate) and 10589 Cn (staminate) with different grain weight characteristics were hybridized to obtain 6 backcross generations viz. P1, P2, F1, B1, B2 and F2. The scaling test indicated that overall average, primary and secondary individual grain weights and % tertiary grain weight produced failed to satisfy the additive - dominance model and digenic interactions were detected …

Production Of Biogas From Water Hyacinth: Effect Of Subtrate Concentration, Particle Size And Incubation Period, J H Y Katima

Tanzania Journal of Science

A study was conducted, at constant temperature, to determine the effect of substrate concentration, particle size and incubation time on biogas production from water hyacinth. Substrate concentration was varied between 5-30 g/l of water, particle size between <1 mm - 3 mm and incubation period between 1-6 days. The maximum methane prodction of 72.53% v/v at substrate concentration of 25 g/1 and particle size less than 1 mm for water hyacinth shoots was achieved after five days of incubation. However, for the whole water hyacinth plant, methane content was 65.67% v/v at the same conditions.

Heavy Metals In Green Vegetables And Soils From Vegetable Gardens In Dar Es Salaam, Tanzania, O C Othman

Tanzania Journal of Science

Edible portions of five varieties of green vegetables, namely amaranth, chinese cabbage, cowpea leaves, leafy cabbage and pumpkin leaves, collected from several areas in Dar es Salaam, were analyzed for lead, cadmium, chromium, zinc, nickel and copper. Except for zinc, the levels of heavy metals in the vegetables grown at Tabata area were much higher than in the vegetables from Ukonga and Kiwalani. Amaranth and pumpkin leaves had more than 60% higher content of heavy metals, especially copper, chromium and lead, than the other vegetables. All vegetables from Tabata, Buguruni and Sinza had lead-levels higher then the FAO/WHO recommended permissible …

Production Of Biogas From Water Hyacinth: Effect Of Substrate Loading In Semi-Batch & Batch Operations, J Katima

Tanzania Journal of Engineering and Technology (TJET)

A study was carried out to establish the effect of substrate loading rate on the production of biogas from water hyacinth. The experiments revealed that the maximum methane yield in a batch process was 0.166 normal litre (NLVg Of volatile solids (VS) added at substrate concentration of 25 g dry mass'litre after five days of incubation. The maximum methane yield in a semi-batch process was 0.153 NWg VS added at 1.30 g VS'litre day and retention time Of 15 days.

Baseflow Separation Based On Storage-Outflow Modelling Of Streamflow Recessions, With Application To Semi- Arid Catchments In Tanzania, S Mwakalila

Tanzania Journal of Engineering and Technology (TJET)

Discharge in many rivers is Often fed by baseflow provided by drainage of the saturated zone in the shallow permeable soils. It is becoming clear that the outflow from this saturated zone is not linear proportional to storage as is commonly assumed in many algorithms. The objectives Of this study theretore, are first to explore the extent to which the assumption of linearity in storage-outflow relationships is valid and secondly to introduce an alternative approach to baseflow separation algorithms for estimating direct mnoff time series. Numerical analysis Of streamflow recessions from the semi-arid catchments of the Great Ruaha basin in …

Recyclability Of Modified Ps-Aq Pulps At Around Kappa 30, Rwaichi Minja

Tanzania Journal of Engineering and Technology (TJET)

Bleachable grade pulps prepared from Nonvegian softwood spruce chips while simulating possible alternatives of improving pulp yield by application Of polysulphide (PS) and anthraquinone (AQ) have been used in this study. The tests for recyclability were performed on hydrogen form pulps. The pulps considered were Iso- Thermal cooking (ITC) kraft pulp which was used as a reference pulp, conventional PS-AQ pulp, soda PS-AQ pulp and kraft PS-AQ pulp. The loss Of swelling ability (homification) Of the pulps, was determined by measurement of water retention value (W R V). The results showed that, PS-AQ pulps had similar or slightly better swelling …

Some Aspects Of Erosive Waves At Kunduchi Beach, Dar Es Salaam, Tanzania, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

The area north of the Dar es Salaam City is endowed with beautiful sandy beaches and high concentration or tourist beach hotels that are threatened by coastal erosion. In order to protect the buildings and land, coastal erosion must be controlled by mitigation options that are based on scientific data, wave and current climate along the East African region are generally controlled by the seasonal monsoon winds. During the north-east monsoon period when Winds blow from the Northeast, the wind-generated waves approach the coast from the northerly direction and produce long-shore Currents With a southerly component. During the southerly monsoon …

Efeci's In Reinforced Concrete Due To Environmental Conditions, And Concrete Treatment: A Case Study At The University Of Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Concrete is produced by mixing together cement, water and aggregates (i. e. sand and coarse aggregates) in specified proportions, It can do well with compressive forces but it is very weak under tensile forces. TO Overcome this problem, steel reinforcement are normally added to produce reinforced concrete which can also withstand tensile forces Experience shows that environmental conditions may have a negative impact On the durability of reinforced concrete structures resulting in development of defects if not properly assessed and appropriate measures adopted to arrest the same at the design and construction stages. The severity of damages for the investigated …

Stress Conditions In The Kilombero Rift, Central Tanzania, A Mruma

Tanzania Journal of Engineering and Technology (TJET)

The ancient and current Stress conditions at the northwestern flank of the Kilombero Rift are assessed in this paper. Neoproterozoic Stresses in the area were associated With 3200/200 trending principal axis of straining in the rocks. Ihis deformation imparted Precambrian ductile gneissic and concordant mineral foliation with attitude Of 0200/3$WNW, 3200/200 trending b•minerai lineation and isoclinal folds With axes trending parallel to the mineral lineation.phanerozoie deformations are mainly of pennvrriasic and Cenozoic periods. Both Of the two episodes Of deformation had constant orientation of princi axes of stresses with trending 0600/020, 02 trending 1600/800 and trending 33 1100. Stress conditions …

Electrokinetic Cha Raci'erisation Of Colloidal A-Alumina, J Ntalikwa

Tanzania Journal of Engineering and Technology (TJET)

Electrophoretic mobility (uD is an important rneasurable parameter in studying the electrokinetic properties of a colloid dispersion. This parameter is Often convened into zeta potential (C) Which piays a great role in thc description Of the stability towards aggregation Of dispersed particles. In this paper, measurements of Of colloidal a-alumina dispersed in various concentrations of electrolyte arc reported. It was observed that, the isoelectric points (the pH at which us = O) occurred at 7.52 ± 0.32, 8.05 ± 0.11 and 7,95 ± 0.18 in Naci, KCI and NaNOs respectively. The isoelectric point was observed to be a function Of …

Comparative Analysis Of Rng K-E And 'Standard' K-C Models For Fluid Flow Around A Cylinder, A Temu

Tanzania Journal of Engineering and Technology (TJET)

A two-dimensional computational scheme for simulating fluid flow around a cylinder was investigated. RNG (Re-NOrmalisation Group) and 'standard' turbulent closure models were used. simulation was implemented with assistance OfFLOW-3D computational fluid dynamics (CFD) code. The governing equation Of fluid motion, in Eulerian form, included body forces as well as surface forces. The computational model predictions for fluid velocity showed good agreement between the two models. Comparison Of the viscosities showed a large deviation from the two models, with RNG k-E model giving a better approximation. Comparison Of the velocity around the cylinder, as obtained from RNG k-c model, with approximation …

A Study Into Lack Of Product Innovation And Business Techniques At The Tricycle Workshop And Rrs Lessons To Small Companies, E Elias

Tanzania Journal of Engineering and Technology (TJET)

A study was carried out at the Tricycle Workshop (TW) which was facing the problem of !ack of orders and therefore stagnation Of business. The objective of the study was to find out reasons for this situation and to propose possible remedial solutions. The study was conducted using the principles of the Product Innovation process where internal and external issues related to the business Of the company were investigated for information. Analysis Of information obtained indicated that the bad situation of the TW had mainly been caused by the nature of the tricycles-supply system whereby users (disabled persons) are unable …

Composition And Anaerobic Digestion Of Single And Combined Organic Fractions Of Municipal Solid Waste Of Dar Es Salaam, A K Kivaisi, J Mukisa

Tanzania Journal of Science

The composition of major categories of municipal solid waste (MSW) of Dar es salaam city was determined. Food remains and vegetable matter constituted 80-90% of the categories. Organic fractions of the individual categories contained 18-20 % total solid (TS), 30-50 % (dry weight) total fibre and 1-1.3 % nitrogen. The assorted organic fractions were tested for anaerobic conversion into biogas at 55°C in batch cultures for 14 days with a mixed population of microorganisms. At a substrate concentration of 6-8 g volatile solids per litre fermenter volume (g VS l-1 FV) individual fractions were degraded by 51-75% and gave methane …

Influence Of Endocrine Activity On Larval Development In Busseola Fusca (Fuller) (Lepidoptera:Noctudine), M Njau

Tanzania Journal of Science

The present study investigated the role of juvenile and moulting hormones in development of Busseola fusca. Morphometric measurements were used to distinguish differences in endocrine activity between non-diapause and diapause development with regard to the prothoracic glands and the corpora allata. The corpora allata of non-diapause larvae were similar in size to those of diapause larvae. The critical period for the prothoracic glands to produce the required titer of ecdysone for further development was by the third day after ecdysis to the last larval instar. Juvenile hormone extracts from haemolymph of Busseola fusca larvae in non-diapause and diapause development had …

Subsidence History Of The Rukwa Rift In South West Tanzania Analysed From Ivuna Well, E I Mbede

Tanzania Journal of Science

The variation in subsidence rate during rift basin development is a good indication for the Geodynamic history of a sedimentary basin. The sedimentary section of Ivuna Well is herein used to explain the structural evolution of Rukwa Basin within the Western Rift of the East African Rift System. The sedimentary record of Ivuna Well is extracted from published information. The effects of sedimentary load, corrected for compaction and variation in water depth, and lake-level have been removed to obtain the "tectonic subsidence." Curves show two phases of accelerated subsidence related to the fault controlled rifting phases: The Karoo rifting and …

D13c Signatures Of Flora, Macrofauna And Sediment Of A Mangrove Forest Partly Affected By Sewage Wastes, J F Machiwa

Tanzania Journal of Science

Stable carbon isotope ratios (d13C) of sediments, suspended particulate matter, and crab gut content from Maruhubi mangrove forest, Zanzibar, were determined. Stable carbon isotope ratios were used to determine sources of organic matter in the forest. Mangrove organic carbon (d13C±SD = - 27.97±0.25) was found to be an important component of the sediment organic matter except at the marine fringe zone (d13C±SD = - 17.26±0.83). The areal distribution of d13C values show that the marine fringe zone was rich in organic carbon of marine origin. The terrestrial fringe zone was dominated by a mixed source of sediment organic carbon (d13C±SD …

Preliminary Evidence For A Second -525-545 Ma Old Event Of Granilate Facies Metamorphism In The Mozambique Belt Of Tanzania And Its Implication For A Two-Stage Model For Gondwana Assembly, M A H Maboko

Tanzania Journal of Science

Garnets from two samples of the Kitumbi granulites in the Mozambique Belt of north eastern Tanzania yield Sm-Nd ages of 525±15 Ma and 545±15 Ma. At the 95% confidence level, these ages are younger than the 576 ±15 to 634±16 Ma (Mean 606±12 Ma) ages previously reported from the more extensive Eastern Granulites. The Kitumbi garnets are therefore interpreted as dating cooling from a granulite facies event that is distinctly younger than the 630-700 Ma event that produced the Eastern Granulites. Unlike the Eastern Granulites, the Kitumbi rocks occur as small enclaves not separated from the surrounding amphibolite facies gneisses …

Heavy Metals And Organic Pollutants In Sediments Of Dar Es Salaam Harbour Prior To Dredging In 1999, J F Machiwa

Tanzania Journal of Science

Heavy metals and organic contaminants were analysed in the sediments of the inner area of the Dar es Salaam harbour. Complementary analytical parameters, such as, the organic carbon content and the silt/clay fraction of the sediments showed good positive correlation (r = 0.64). Stations that had high content of fine grain material in the sediment also indicated relatively high level of organic carbon and pollutants. The Florida criteria (MacDonald 1993) for assessment of pollution of tropical marine sediments was adopted in oredr to evaluate the extent of pollution in Dar es Salaam harbour sediments. The Florida criteria is one of …

Thermogravimetric Study Of Gadolinium Chlorotungstate In Air Between 25 And 1500°C., F N Ngassapa, N U Venskovskii

Tanzania Journal of Science

Using DTA, X-ray powder diffraction, chemical and optical methods, the thermostability of Gd3WO6Cl3 was investigated. The compound was relatively stable on heating in air up to 710oC. Above this temperature it exhibited two decomposition temperature ranges (710-900oC and 900-1130oC). The final product consisted of a mixture of gadolinium tungstate of different composition. This suggests the decomposition scheme of polyphase products

Defects In Reinforced Concrete Due To Environmental Conditions And Concrete Treatment: A Case Study At The University Of Dar Es Salaam, A. Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Concrete is produced by mixing together cement, water and aggregates (i. e. sand and coarse aggregates) in specified proportions. It can do well with compressive forces but it is very weak under tensile forces. To overcome this problem, steel reinforcement are normally added to produce reinforced concrete which can also withstand tensile forces. Experience shows that environmental conditions may have a negative impact on the durability of reinforced concrete structures resulting in development of defects if not properly assessed and appropriate measures adopted to arrest the same at the design and construction stages.

The severity of damages for the investigated …

Production Innovation Through Design Methodology: Development Of A Fuel Pump For Motorists, E. Elias

Tanzania Journal of Engineering and Technology (TJET)

Design Methodology is a discipline of scientific engineering design for provision of solutions to user needs. It is composed of design models (showing the path/procedural steps of design) and design tactics (i.e. techniques, technologies and methods aiding the designer). When rigorously applied, design methodology leads to innovation of products and businesses.

The present paper describes how design methodology was applied to the development of a siphon device (Apump@) for motorists when in need to refill fuel in their vehicles away from petrol stations. The need for the device was realised through the method of Alooking around & deep thinking@ and …

The Behaviour Of Reinforced Block-Work Walls In Axial Tension, Laurent Shirima

Tanzania Journal of Engineering and Technology (TJET)

Reinforced blockwork with horizontally laid reinforcing bars is used for walls in liquid retaining structures in developing countries. This is the case where, the level of technology in terms of skills and equipment is not in a position to allow successful construction of reinforced concrete walls. Blockwork walls are very sensitive to cracking which cannot be prevented by reinforcement. The major problem for designers is the behaviour of such walls in tension caused by hydrostatic pressure of the stored liquid. This paper reports results of a research work to study the behaviour of reinforced blockwork walls in tension. It was …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Measurement Of Markstein Lengths In Laminar Spherical Explosion Flames, E .M.J Mushi

Tanzania Journal of Engineering and Technology (TJET)

Schlieren photography was used to record the development of spherical flames in a combustion bomb. Flame speed and flame stretch were evaluated from the data and used to evaluate Markstein lengths and numbers. The results indicate a strong influence of both the spark discharge energy and equivalence ratio. Low spark discharge energy is observed to give rise to more unstable flames compared to high energy sparks. It is observed that for the range of energy tested, 80 and 400 mJ gave the best stability for the flames. For equivalence ratio less or equal to 1.225 an 80 mJ discharge results …

Evaluation Of Extreme Wind Speeds In Relation To The Design Of Coastal Structures In Tanzania, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

Five distribution functions, FT-I and Weibull with the exponent k = 0.75, 1.0, 1.4 and 2.0 respectively, have been applied to 25-year wind data collected between 1972 and 1996 at Tanga, Dar Es Salaam, Zanzibar and Mtwara Meteorological stations. One maximum value for every year from the full data record was drawn to constitute the annual maxima series for each station. For each of the stations, 2-, 50- and 100-year return wind speeds with corresponding 90% confidence intervals were computed. The distribution functions were fitted to the data by the Least Squares Method. Results from the study show that FT-I …

Strategic Transformation Of Public Enterprises In Tanzania: Action Research Oriented Methodology, M A.M Victor

Tanzania Journal of Engineering and Technology (TJET)

Naturally, enterprises are dynamic in the sense that they can either grow or shrink. Growth is the wish of all owners and particularly of fast growth. We talk of growth here as both increasing the speed of circulation of the working capital profitably and increasing the size or expansion of the fixed assets through retained earnings. Proper management will in most cases assure a gradual growth. However, in some situations, gradual growth may not be sustainable due to global competition and/or some other political changes such as elimination of monopoly. In these situations, enterprises will need a strategic transformation, not …

The Effect Of System And Oxygen Partial Pressure On Single Coal Particle Heterogeneous Ignition Temperature Under Conditions Of Negligible Convection; Experimental Observation, H. Katalambula

Tanzania Journal of Engineering and Technology (TJET)

Abstract Under conditions of high volatile concentrations, the influence of oxygen concentration on single coal particle ignition becomes more significant. The high volatile concentration conditions have been simulated by employing a microgravity environment. Results show that under these conditions, the heterogeneous ignition temperature decreases faster with increasing oxygen concentration than under normal conditions. The ignition temperature also decreases with increasing system and oxygen partial pressure under both conditions. Generally, the system and oxygen partial pressure show similar and complimenting effects on ignition temperature.

Mathematical Modelling Of Road Bumps, E. S. Massawe

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a general mathematical model that may be used for construction of a road bump on an inclined road is developed. It is shown that if the parameters for the inclination are set to zero, the resulting model reflects the special case of a flat road. Existing experiences are briefly highlighted and a case study was done on different locations along the University Road to demonstrate the developed model.

Evaluation Of Soil Conservation Measures: A Case Study In Mbinga District, Ruvuma Region, Tanzania, S. Y. Thadei

Tanzania Journal of Engineering and Technology (TJET)

A study on soil conservation measures was conducted in two villages, Tukuzi and Mahenge, in Mbinga District, Ruvuma Region, Tanzania. The results showed that the ngoro farming system was effective in controlling soil erosion by water on both steep and gentle slopes. Sediments collected from ngoro had high concentrations of plant nutrients such as available phosphorus (P), total nitrogen (N), organic carbon (OC) and exchangeable bases. This was probably due to nutrients released from decomposed grass bundles buried in the soil. In preventing soil erosion, ngoro and bench terraces were equally effective, while contour ditches were as effective as ridges …

Production Of Fermentable Sugars From Waterhyacinth By High-Temperature Dilute-Acid Hydrolysis Method, J. H. Y. Katima

Tanzania Journal of Engineering and Technology (TJET)

A study on acid-catalyzed hydrolysis of Waterhyacinth (WH) biomass for production of monomeric sugars has been done. Waterhyacinth (Eichhornia Crassipes) plants were obtained from Lake Victoria. A yield of 18.5% w/w fermentable sugars was achieved during hydrolysis of oven-dried Waterhyacinth (ODWH) biomass at 220°C and 1.5% w/w H₂SO₄ acid. The waterhyacinth (WH) hydrolysates obtained from a high-temperature dilute-acid hydrolysis were rich in six-carbon (C₆) sugars (glucose) which could be fermented to ethanol. The production of fermentable sugars from waterhyacinth biomass is a promising new opportunity for its economic value which can in turn accelerate its rate of harvest and utilization.