Digital Commons Network^™

Thin-Layer Prestressed Composite Ferroelectric Driver And Sensor Characterization With Application To Separation Flow Control, Karla M. Mossi

Mechanical & Aerospace Engineering Theses & Dissertations

Experiments were conducted in two different stages--general piezoelectric actuator characterization and flow separation control applications. The characterization of the piezoelectric devices was performed in several stages, due to the many variables that affect performance. The first stage of the characterization consisted of tests conducted on 13 different THUNDER^TM (thin-layer composite unimorph ferroelectric driver and sensor) configurations. These configurations consisted of a combination of 1, 3, 5, 7, and 9 layers of 25μ thick aluminum as backing material, with and without a top layer of 25μ aluminum. All of these configurations used the same piezoelectric ceramic wafer (PZT-5A) with dimensions …

Evaluation Of Airport Operating Efficiencies Using Data Envelopment Analysis, Scott Andrew Cummings

Engineering Management & Systems Engineering Theses & Dissertations

Airport congestion represents a serious obstacle to the future growth of the air transportation industry in the United States. Future development of new airports, and expansion of existing ones is required to meet the growing demands in domestic and commercial air travel. Globalization of economies and international travel has placed additional burdens on airports nationwide. This growth is requiring airports to operate at peak efficiencies. Economic growth of surrounding industries is dependent on the airport that services that geographical region. The variations in functions that airports offer, and therefore the differences in operations, do not lend themselves to traditional efficiency …

Explosive Vapor Generation And Sampling In Conjunction With Ion Mobility Spectrometry, Saeed H. Almeer

Chemistry & Biochemistry Theses & Dissertations

The primary objective of this research is to develop an inexpensive and reliable method to generate vapor pulses of explosives using 2,4,6-trinitrotoluene TNTl for proof of concept. A secondary objective is to demonstrate the use of the vapor generator in various applications keeping in mind potential field scenarios involving explosives. A vapor generator/collector system was developed which gives reproducible pulses of TNT vapors at nanogram levels. The use of this technology was demonstrated in evaluating different surfaces for vapor adsorption of TNT in conjunction with ion mobility spectrometry as the primary analytical tool. Of the materials examined, Teflon was by …

Fiber-Reinforced Plastic Composite Beam Stability And Load And Resistance Factor Design Approach, Mojtaba B. Sirjani

Civil & Environmental Engineering Theses & Dissertations

Fiber Reinforced Plastic (FRP) structural members are rapidly gaining impetus in civil engineering applications. Also, thin-walled open beams with I-shaped, channel, and other types of sections are of practical importance to both structural analysts and designers. This dissertation presents the outcome of a detailed experimental and theoretical investigation of the strength and stability of FRP composite beams. Three- and four-point loading tests are conducted on FRP I- and channel section beams. The behavior of these beams is studied under gradually increasing static loads up to the maximum load-carrying capacity corresponding to either material cracking or flexural-torsional instability. First, the theoretical …

Institutions, Developmental Alliances, And Economic Development In Korea And Brazil (1950-1985), Charles Paul Winebarger

Graduate Program in International Studies Theses & Dissertations

This paper compares the development of Korea and Brazil, 1950-85. These newly industrialized countries developed at above-average rates among less developed countries. Korea developed more rapidly than Brazil. The paper contends that institutions, interest groups (especially firms) and the state, enter into developmental alliances. Alliances affect policies. Policies, then, affect development.

Findings reveal interesting trends in the 1950s' democracies of the cases. Both countries had semi-autonomous states, equivocally committed to industrialization. Industry was the growth point in each. Korea used local firms to industrialize; Brazil used foreign firms. In both cases, the state allied itself with firms. Policy mostly favored …

Spectral/Temporal Segment Features For Automatic Speech Recognition, Xi Hong Wang

Electrical & Computer Engineering Theses & Dissertations

In this thesis an approach for efficiently computing a compact spectral/temporal feature set for representing a segment of speech, with effective resolution depending on both frequency and time position within the segment, is developed, analyzed, and tested. The goal of this method is to mimic the resolution properties of the human auditory system, but using a computationally efficient FFT-based front end rather than a more complex auditory model. In particular this method applies both frequency and time "warping" to FFT spectra to obtain good frequency resolution at low frequencies and good time resolution at high frequencies. Time resolution is also …

Electrocortical Output And Hemispheric Contributions To The Alert State During A Sustained Attention Task, Treven Curtis Pickett

Psychology Theses & Dissertations

This study investigated the relative electrocortical contributions of specified cerebral locations and the potential motoric influence of handedness in a biocybernetic feedback environment. Thirty six right-handed subjects engaged in two sixteen minute trials of a compensatory tracking task by guiding (via a joystick) a circle over a stationary target presented on a computer screen, performing one trial with their preferred (right) and one using their non-preferred (left) hand.

For each subject, a Macintosh computer interpreted electrocortical activity through an engagement index (20*beta/(alpha+theta)) and changed the task mode, i.e. manual (subject guides the task) or automatic (computer guides the task) as …

Ir-Hot Gas Heat Source For Automated Tow Placement, Ray Walton Grenoble

Mechanical & Aerospace Engineering Theses & Dissertations

A series of five experiments on the NASA Langley automated tow placement robot revealed stagnation of gas flow in the nip region. Since the torches could not heat effectively in the nip region, the roller temperature was the dominant influence on interlaminar bond strength. The roller temperatures required for high bond strength caused resin and fiber on the panel top surface to adhere to the compaction roller. Resin and fiber was pulled from the panel surface and wrapped around the roller, which was a severe processing problem. A supplemental radiant heat source was designed to permit reductions in roller temperature. …

Sparse Equation-Eigen Solvers For Symmetric/Unsymmetric Positive-Negative-Indefinite Matrices With Finite Element And Linear Programming Applications, Hakakizumwami Birali Runesha

Civil & Environmental Engineering Theses & Dissertations

Vectorized sparse solvers for direct solutions of positive-negative-indefinite symmetric systems of linear equations and eigen-equations are developed. Sparse storage schemes, re-ordering, symbolic factorization and numerical factorization algorithms are discussed. Loop unrolling techniques are also incorporated in the coding to enhance the vector speed. In the indefinite solver, which employs various pivoting strategies, a simple rotation matrix is introduced to simplify the computer implementation. Efficient usage of the incore memory is accomplished by the proposed "restart memory management" schemes. A sparse version of the Interior Point Method, IPM, has also been implemented that incorporates the developed indefinite sparse solver for linear …

The Effects Of Fabry-Perot Fringing On The Sensitivity Of A Wavelength Modulation Experiment, Patrick C. Shea

Electrical & Computer Engineering Theses & Dissertations

Parasitic Fabry-Perot etaloning plagues many experiments which use wavelength modulation spectroscopy. This fringing, which is an artifact that almost always appears in such experiments, arises from multiple reflections in the optical elements in the experimental apparatus. The etaloning plays a detrimental role and limits the ultimate sensitivity of wavelength modulation spectroscopy experiments. The research described in this thesis investigates this phenomenon. Experimental results are presented which show that when the Q-factor of the parasitic etalon is smaller that that of the absorption line being measured, significant improvement in the Signal to Fringe Noise Ratio can be obtained through the use …

The Design And Testing Of An Inlet-Airfoil For A High Altitude Remotely Piloted Aircraft, Preston Bradley Martin

Mechanical & Aerospace Engineering Theses & Dissertations

The following work describes and validates a methodology for the aerodynamic design of a low drag, efficient inlet-airfoil to be used on the cooling installations of a high altitude remotely piloted aircraft. Owing to the primary aircraft design requirement of subsonic endurance at high altitude (85,000 ft), the flight conditions present an aerodynamically unfavorable combination of low chord Reynolds number (500,000) and high subsonic Mach number (0.5). At this flight condition, the inlet-airfoil must meet the heat exchanger cooling flow requirements while maintaining the aerodynamic performance of the airfoil. As a result, the design method is closely coupled with not …

System Identification And Control Of Cavity Noise Reduction, Chien-Hsun Kuo

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation first presents indirect closed-loop system identification through residual whitening, then identifies the cavity noise system and applies controllers to reduce the noise. High speed air flow over the cavity produces a complex oscillatory flow-field and induces pressure oscillations within the cavity. The existence of cavities induces large pressure fluctuations which generate undesirable and loud noise. This may have an adverse effect on the objects, such as reducing the stability and performance of overall system, or damaging the sensitive instruments within the cavity.

System identification is the process of building mathematical models of dynamical systems based on the available …

Building Lms Adaptive Filters With Register-Based Fpgas, Li Ding

Electrical & Computer Engineering Theses & Dissertations

In this thesis, an 8-bit least mean squares (LMS) adaptive digital filter with 16 coefficients is implemented on a single FPGA, using the MaxPlus+2 design environment. The system is constructed as a hierarchical structure, using four different levels of design hierarchy. Subdesigns at each level of the hierarchy project are complied, fitted and simulated to test and verify their functional correctness. The complete system is tested and verified by checking the MaxPlus+2 simulator results against fixed-point integer arithmetic simulations written in Matlab. The resulting adaptive filter is subsequently mapped to the Alters FLEX I OK20TC144-3 device, resulting in a 14,500 …

Thermal Lattice Boltzmann Simulations Of Variable Prandtl Number Turbulent Flows, Min Soe, George Vahala, Pavol Pavlo, Linda L. Vahala, Hudong Chen

Electrical & Computer Engineering Faculty Publications

Thermal lattice Boltzmann (TLBE) models that utilize the single relaxation time scalar Bhatnagar, Gross, and Krook collision operator have an invariant Prandtl number. For flows with arbitrary Prandtl number, a matrix collision operator is introduced. The relaxation parameters are generalized so that the transport coefficients become density independent. TLBE simulations are presented for two-dimensional free decaying turbulence induced by a strongly perturbed double velocity shear layer for various Prandtl numbers.

Southern Strategies, James R. Sweeney

History Faculty Publications

From the mid-1960's, Virginia Republicans, in tune with President Richard Nixon's active "Southern strategy," revived party fortunes in the state by capitalizing on the ongoing degeneration of Virginia Senator Harry F. Byrd, Sr.'s powerful conservative Democratic organization and the factionalization of the state Democratic Party. Republican Abner Linwood Holton, Jr., solidly carried the 1969 gubernatorial election. In the 1970 senatorial election Independent Harry Flood Byrd, Jr., defeated Republican Ray Lucian Garland and Democrat George Rawlings. Senator Byrd, Jr., had enjoyed Nixon's "benevolent neutrality," but never did join the Republican Party as the president had hoped; in office he voted with …

Emission Of Excimer Radiation From Direct Current, High-Pressure Hollow Cathode Discharge, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

A novel, nonequilibrium, high-pressure, direct current discharge, the microhollow cathode discharge, has been found to be an intense source of xenon and argon excimer radiation peaking at wavelengths of 170 and 130 nm, respectively. In argon discharges with a 100 μm diam hollow cathode, the intensity of the excimer radiation increased by a factor of 5 over the pressure range from 100 to 800 mbar. In xenon discharges, the intensity at 170 nm increased by two orders of magnitude when the pressure was raised from 250 mbar to 1 bar. Sustaining voltages were 200 V for argon and 400 V …

Generation Of Intense Excimer Radiation From High-Pressure Hollow Cathode Discharges, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

By reducing the diameter of the cathode opening in a hollow cathode discharge geometry to values on the order of 100 μm, we were able to operate these discharges in noble gases in a direct current mode up to atmospheric pressure. High-pressure discharges in xenon were found to be strong sources of excimer radiation. Highest intensities at a wavelength of 172 nm were obtained at a pressure of 400 Torr. At this pressure, the vacuum ultraviolet (VUV) radiant power of a single discharge operating at a forward voltage of 220 V and currents exceeding 2 mA reaches values between 6% …

Buckets: Aggregative, Intelligent Agents For Publishing, Michael L. Nelson, Kurt Maly, Stewart N. T. Shen, Mohammad Zubair

Computer Science Faculty Publications

Buckets are an aggregative, intelligent construct for publishing in digital libraries. The goal of research projects is to produce information. This information is often instantiated in several forms, differentiated by semantic types (report, software, video, datasets, etc.). A given semantic type can be further differentiated by syntactic representations as well (PostScript version, PDF version, Word version, etc.). Although the information was created together and subtle relationships can exist between them, different semantic instantiations are generally segregated along currently obsolete media boundaries. Reports are placed in report archives, software might go into a software archive, but most of the data and …

Creating A Canonical Scientific And Technical Information Classification System For Ncstrl+, Melissa E. Tiffany, Michael L. Nelson

Computer Science Faculty Publications

The purpose of this paper is to describe the new subject classification system for the NCSTRL+ project. NCSTRL+ is a canonical digital library (DL) based on the Networked Computer Science Technical Report Library (NCSTRL). The current NCSTRL+ classification system uses the NASA Scientific and Technical (STI) subject classifications, which has a bias towards the aerospace, aeronautics, and engineering disciplines. Examination of other scientific and technical information classification systems showed similar discipline-centric weaknesses. Traditional, library-oriented classification systems represented all disciplines, but were too generalized to serve the needs of a scientific and technically oriented digital library. Lack of a suitable existing …

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The surface step density on the vicinal Pb(111) and the surface vacancy density on Pb(100) after laser superheating and melting are investigated using reflection high-energy electron diffraction. With ∼100-ps laser pulses, Pb(111) surface superheating does not significantly change the density of the steps and step-edge roughness. However, after laser surface melting, the average terrace width and the string length at the step edge become as large as those at room temperature. The average terrace width at 573 K changes from 38±15 to 64±19 Å after laser surface melting, while the average string length at the step edge changes from 90±14 …

Thermodynamic Modeling And Analysis Of Human Stress Responses, Satish C. Boregowda

Mechanical & Aerospace Engineering Theses & Dissertations

A novel approach based on the second law of thermodynamics is developed to investigate the psychophysiology and quantify human stress level. Two types of stresses (thermal and mental) are examined. A Unified Stress Response Theory (USRT) is developed under the new proposed field of study called Engineering Psychophysiology. The USRT is used to investigate both thermal and mental stresses from a holistic (human body as a whole) and thermodynamic viewpoint. The original concepts and definitions are established as postulates which form the basis for thermodynamic approach to quantify human stress level. An Objective Thermal Stress Index (OTSI) is developed by …

Circulation, Vol. 5, No. 2, Center For Coastal Physical Oceanography, Old Dominion University

CCPO Circulation

Winter 1998 issue of CCPO Circulation featuring article "Coastal Oceanographic Research Experiences in Chile"

A Hierarchical Filtering-Based Monitoring Architecture For Large-Scale Distributed Systems, Ehab Salem Al-Shaer

Computer Science Theses & Dissertations

On-line monitoring is essential for observing and improving the reliability and performance of large-scale distributed (LSD) systems. In an LSD environment, large numbers of events are generated by system components during their execution and interaction with external objects (e.g. users or processes). These events must be monitored to accurately determine the run-time behavior of an LSD system and to obtain status information that is required for debugging and steering applications. However, the manner in which events are generated in an LSD system is complex and represents a number of challenges for an on-line monitoring system. Correlated events axe generated concurrently …

Laureate, 1998, Old Dominion University

University Yearbooks

1998 yearbook of Old Dominion University

A Study To Determine If Students Who Receive Satisfactory Grades In The Classroom Portion Of The Ford Asset Program Will Receive Corresponding Grades In The Co-Op Training Phase, John R. Cuprisin

OTS Master's Level Projects & Papers

The hypothesis for this study was that students who receive satisfactory grades in the classroom portion of the Ford ASSET Program will also receive corresponding grades in the co-op training phase.

An Assessment Of Past Nasa Program Sponsored Pre-Service And In-Service Teachers To Determine The Impact Of Their Training And Preparation For The Computer Technology Standards Of Learning For Virginia Public School Educators, Lloyd B. Evans

OTS Master's Level Projects & Papers

To assist in solving these problems, the following objectives have been established: 1. To measure how well prepared the pre-service teachers are to use and teach instructional computer technology; 2. To measure in-service teachers' computer technology skills; 3. Assess teachers' integration of computer technology into the core curriculum; 4. Conduct a diminutive program evaluation of NASA computer technology education programs.

A Study To Determine Appropriate Training Models For Maintenance Technicians - Cox Communications Hampton Roads, Joel P. Horner

OTS Master's Level Projects & Papers

The following goals were used to direct this study: 1. Determine an appropriate training model for Maintenance Technicians, per training occasion; 2. Determine an appropriate training format for Maintenance Technicians, per training occasion and model; 3. Determine the appropriate administrative and management aspects of the training models and formats for Maintenance Technicians.

A Study Comparing The Technical Problem Solving Abilities Of Middle School Students Who Have Participated In One Or More Technology Education Courses To Those Of Students Having No Course Work In Technology Education, Anthony A. Cardoza

OTS Master's Level Projects & Papers

The problem in this study was to compare the technical problem solving capabilities of middle school students that have had one or more nine-week courses in technology education with the technical problem solving capabilities of middle school students that had no course work in technology education.

Placement Of Piezoelectric Actuators For Active Control Of Vibration Using Modal Parameters, Xuegeng Zhu

Mechanical & Aerospace Engineering Theses & Dissertations

An equation is derived to model the piezoelectric actuators incorporation with flexible structures. This equation permits the comparison of the performance indices over the entire structure for a piezoelectric actuator with constant area, which is unachievable if the Finite Element Method is used for complicated structures.

An index has been developed for placement of piezoelectric actuator for control of vibration of a flexible structure. This index is derived from the definition of H2norm. Computation of the proposed index requires only the natural frequencies and corresponding mode shapes of the structures of interest. The method is well suited to large …

A Framework For Controlling Quality Of Sessions In Multimedia Systems, Alaa S. Youssef

Computer Science Theses & Dissertations

Collaborative multimedia systems demand overall session quality control beyond the level of quality of service (QoS) pertaining to individual connections in isolation of others. At every instant in time, the quality of the session depends on the actual QoS offered by the system to each of the application streams, as well as on the relative priorities of these streams according to the application semantics. We introduce a framework for achieving QoSess control and address the architectural issues involved in designing a QoSess control laver that realizes the proposed framework. In addition, we detail our contributions for two main components of …