Digital Commons Network^™

Vibration And Buckling Of Elastic Plates With Shear And Rotatory Inertia, Bomi Batiwalla

Dissertations

The effects of shear, rotatory inertia and inplane forces on the transverse vibration of thin plates are studied. In addition, the effect of shear on the buckling of thin plates is examined. A general differential equation of motion is derived for an isotropic thin plate subjected to normal and inplane forces with the consideration of shear and rotatory inertia. The method of internal constraints and Hamilton's principle are utilized.

The resulting fourth order differential equation is solved for simply supported plates of various shapes by employing a finite difference technique. The shapes examined are a square, a circle, a circular …

Nucleus 1972, Newark College Of Engineering

Yearbooks

This is a digitized, downloadable version of the Newark College of Engineering Nucleus.

The Reaction Of P-Nitrophenyl Acetate With Lysine Hydrochloride And Poly-1-Lysine Hydrobromide, Emmanuel Plange Matteer

Theses

The reactions of p-nitrophenylacetate with L-lysine hydrochloride and poly-L-lysine hydrobromide as a function of pH were investigated.

The results indicate that both compounds react with the substrate in the pH range 7.0-10.0 with an apparent optimum pH in the region near 9.65.

Poly-L-lysine reacts more rapidly over the entire pH range investigated than does L-lysine.

Effectiveness Of Training Programs For Graduate Engineers, V.C. Rajashekar

Theses

This thesis represents an investigation of effectiveness as a result of engineering training. The basic elements of effectiveness and its learning process are explained and said that the effectiveness could be learnt and improved.

The term training, is basically the process of education and training. But training cannot be performed as an individual, but is performed as a group. Therefore training a group with having so many individuals needs careful consideration in designing a training program.

In order to get the broadest possible picture of current thinking and current activity in the area of company training programs for graduate engineers, …

The Effect Of Ultrasonic Vibration On Mass Transfer In A Packed Column, Joseph Walter Stanecki

Theses

The object of this research was to investigate the possibility of using externally supplied ultrasonic vibration to surface of a packed distillation column operating at total reflux to improve the separation. The apparatus used for this experimentation consisted of a 2 inch ID Pyrex column having three pairs of ultrasonic transducers epoxied equidistance along the external surface of the column. Each pair of transducers was driven separately by a 50 watt amplifier! power supply and a sine/square wave generator.

There were three types of binary mixtures covered during experimentation: minimum boiling azeotropes, maximum boiling azeotropes and full range mixtures. In …

A Study Of The Optimization Of Ethylene Production In A Tubular Reactor, Richard W. J. Robertson

Theses

The pyrolysis of ethane is a complex reaction involving six individual reactions in a reactant mixture of thirteen components. It is further complicated by the deposition of carbon along the reactor walls. The carbon buildup eventually necessitates reactor shutdown, During the intermediate stages the reactor experiences a gradual increase in inlet pressure which affects the reaction conditions, Optimum temperature profiles exist because the yield goes up with increasing temperature, but, consequently, the reactor must be shut down and cleaned out with increasing frequency. The combined effect causes the yearly production of ethylene to go through an optimum.

To find this …

The Creep And Stress Relaxation Behavior Of Silver Bearing Copper Wire, Alfred Fox

Theses

Creep and stress-relaxation experiments were performed on silverless and silver bearing copper in the temperature range 73F to 250F. The creep experiments were conducted at constant load and temperature, the stress-relaxation tests at constant total strain and temperature for a total time period of 1000 hours. The effect of silver addition of up to 0.2 percent w/o (60oz per ton) on the creep and stress-relaxation behavior of spectrographically pure copper (99.999+ Cu) as well as on that of tough pitch and oxygen free coppers of lesser purity was studied. Spectrographically pure copper was found to be much more susceptible to …

A Study Of The Effect Of A Dielectric Field On The Solvolysis Rate Of Tert-Butyl Bromide In A Recycle Reactor, Rolf L. Ball

Theses

Previous experiments at Newark College of Engineering have shown that a dielectric field can effect the rate of a chemical reaction. A theory was developed in this thesis to postulate how a dielectric field can increase the rate of a first order reaction whose rate determining step is an ionization. An experimental procedure was developed to measure the reaction rate constant of a tertiary alkyl halide with a solvent to test this theory. The solvolysis of tortbutyl bromide in aqueous ethanol (80%), aqueous dioxane (75%) and aqueous acetone (75%) solvent systems were the reactions selected for study. A total of …

The Development Of Langmuir's Adsorption Isotherms For Glucose And Fructose And The Separation Via Continuous Parametric Pumping, Jafir Abbas Jaferi

Theses

The adsorption equilibria and adsorption rates of fructose and of glucose on aqueous suspensions of fullers earth were determined at various temperatures. The Langmuir adsorption equations were fitted to the equilibrium data and the Langmuir constants were determined so that isotherms could be developed for any pair of parametric pumping operating temperatures.

This glucose+fructose+water system was then subjected to continuous thermal parametric pumping for the separation of glucose and fructose. The operating conditions required for the separation were determined from the experimental adsorption rates and equilibrium isotherms. Samples taken from the continuous top and bottom streams were analyzed by polarimetry …

Equilibrium Calculations Via The Benedict-Webb-Rubin Equation Of State, Steven L. Sincoff

Theses

The performance of various vapor-liquid equilibrium calculations requires phase equilibrium data. One of the most versatile sources of this data is an equation of state, re-lating the pressure, temperature, and phase compositions it a single expression. The equation under study herewith is the eight constant Benedict-Webb-Rubin Equation of State.

This paper provides a computer program which evaluates the following types of phase equilibria: bubble-points, dew-points, and two phase flash calculations. Also included in this paper is the theoretical backround of the Benedict-Webb-Rubin Equation of State, calculational techniques, and the data used in the program.

Studies Of Rare Earth Compounds, Rostam Mondegarian

Theses

The work reported herein has consisted of miscellaneous studies of rare earth compounds.

1. The Pr—As system was studied with a view to obtaining a ferromagnetic composition.
2. Attempts were made to prepare ternary compounds by solid state reaction of PrAs, GdAs or YbAs with MnAs, CrAs or FeAs, and PrP, GdP, or YbP with MnP, CrP or FeP.
3. Attempts were made to prepare quaternary compounds by solid state reaction of YbAs, YbP and GdAs with CdI2 in various molar ratios. In many cases new compouns appeared to be formed but because of complexity of the X—ray patterns it was not possible …

Flow Behavior Of Molten Polymer Blends, Kryspin Pawel Maciejewski

Theses

An experimental study of molten polymer blends was made using the Instron Capillary Rheometer. The materials investigated were two phase blends of non-crystalline polymers (poIymethylmethacrystate-low Mw-polyvinylacetate, polyvinylacetate-polystyrene, polymethylmethacrylate-low Mw-polystyrene, polymethylmethacrylate-high Mw-polystyrene), crystalline polymers (polyethylene-polypropylene) and combinations of non-crystalline-crystalline polymers (polyethylene-polystyrene). Two methods of sample preparation were used, blending of a polymer pair in a molten state by the use of Brabender blender, and a simple manual blending of pellets in desired proportion. The Brabender blended polymer pairs show lower viscosities, this is interpreted molecularly as a result of a reduction of the amount of chain entanglement on shearing of the …

Newark College Of Engineering Graduate Programs 1972-73 Academic Year, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

Continuous Interfacial Polycondensation Of Nylon 6-6, Chandrakant A. Patel

Theses

Nylon 6-6 has been prepared by continuous interfacial polycondensation from hexamethylene diamine and adipyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of polyamide 6-6 solution in formic acid (90%) was determined.

As stirring rate and monomer ratio increased, the intrinsic viscosity and polymer yield went through a maximum. Diffusion coefficient (D_AB) for hexamethylene diamine was calculated and from that J_D and mass transfer coefficient /D_AB were calculated. A relation between Reynolds number and J_D factor was established by correlation curve.

The Effect Of Variable Properties On The Laminar Flow Of Gases, Norman Shilling

Dissertations

The problem of heat transfer in laminar flow of a gas through a constant diameter cylindrical tube is treated. The gas is cooled by the tube walls held at constant temperature. Two tube inlet conditions are considered: (1) fully developed velocity and uniform temperature profiles (Graetz boundary condition) and (2) uniform velocity and temperature (UTV) profiles. Results of the theoretical and experimental phases of the work are presented.

The theoretical solution is based on the compressible boundary layer equations with varying transport and thermodynamic property terms retained. For the Graetz condition, an existing finite difference solution scheme is modified for …

Dielectric Properties Of Atactic And Isotactic Polystyrene, Thaddeus F. Kroplinski

Theses

The purpose of this investigation was to determine the dielectric constant and dissipation factor of atactic and isotactic polystyrene at 25°C and at frequencies of 0.1, 1.0, 10, and 100 kilocycles per second. In addition, the effects of molecular weight and crystallinity on the dielectric properties of polystyrene mos also studied.

Polystyrene slabs of uniform thickness mere prepared by molding the polymer under heat and pressure. The isotactic polystyrene slabs Imre annealed at 175°g for various lengths of time to achieve varying degrees of crystallinity.

The molded polystyrene slabs were fitted with circular aluminum foil electrodes to form a three …

The Oxidation Of Carbon Monoxide By Magnesium Aluminate, James A. Whelan

Dissertations

In this research the catalytic oxidation of carbon monoxide was investigated on magnesium aluminate catalysts, MgO:xAl₂O₃, with five different compositions, x, ranging from 1.0 to 3.0. The reaction was run at temperatures ranging from 500 to 600 °C. with radioactive carbon monoxide as the tracer. An experimental technique has been devised for the analysis of unreacted CO which takes into account a correction for the solubility of CO in CO₂.

Four mathematical models were postulated to explain the mechanism of reaction. The models were examined against experimental data by means of non-linear least squares …

A Simple Method For Liquid Enthalpy Departure Calculations, Ching-Lin Chien

Theses

The reduced equation of state for gases and liquids developed by Benson and Golding in 1951 is modified and used to calculate liquid enthalpy departures for saturated pure substances and mixtures. The temperature-independent coefficients in the modified equation are determined from critical properties and experimental liquid enthalpies at the boiling point and at the critical point. The results of the proposed method are compared with those predicted with the modified Redlich-Kwong equation of state by Joffe and Zudkevitch.

Agitation Of Dilatant Fluids, Vijay Jang Datta

Theses

No abstract provided.

Newark College Of Engineering 1971-72 Undergraduate Programs, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

Centering In Parallel Channel Systems, Allen Katz

Dissertations

Several types of signal processing systems in which the signal flows along parallel channels in a fashion similar to the auditory system have been investigated. The effect of excitation with signals containing both single and multiple spectral peaks (formants) was considered. In particular, the effect of nonlinear interaction between channels, referred to as centering, in the presence of noise was studied.

These systems were investigated for their value, both as information processing networks and as models of the auditory system.

The analysis indicates that parallel channel systems, in general, exhibit excellent performance in the presence of noise, and that a …

Prediction Of The Physical Properties Of Pure Gases And Liquids, James L. Filson

Theses

A computer programmed system for the estimation of physical properties of pure compounds from minimum data input on compound type and structure was developed for both gas and liquid phase conditions.

The properties of the gas phase which can be obtained include:

• gas volume
• compressibility
• normal boiling point
• volume at the normal boiling point
• critical temperature, pressure, volume compressibility
• vapor pressure
• Riedel factor
• acentric factor
• ideal heat capacity
• heat capacity at constant pressure
• heat capacity at constant volume
• dipole moment
• intermolecular distance
• hard sphere volume
• viscosity at low pressure
• viscosity at elevated pressure
• thermal conductivity at low pressure
• thermal conductivity …

Computer Model For Reactor Design Of An Ethane Cracking Unit, Derek J. Lough

Theses

The purpose of this thesis is to develop a Fortran [sic] Computer Program to model the radiation section of a pyrolysis tube reactor designed for cracking 100 percent ethane feed. The model calculates the length of the tubular reactor required to obtain a specified ethane conversion or the ethane conversion for a specified reactor length. The resulting solution yields a conversion profile, a temperature profile, and the reactor residence time as a function of tube length. From this data it can be determined if the design is adequate and lies within the reactor model's constraints.

A Nomograph For The Rapid Solution Of The Arrhenius Equation, Joseph John Lamont

Theses

There are presently no calculational aids for the rapid computation of the Arrhenius parameters of the chemical reaction rate equations.

Two nomographs for solving the Arrhenius equation for the relative reaction rate constants at different temperatures, and for computing activation energies and frequency factors are presented. Several graphs and tables of the relative reaction rate constant as a function of activation energy and temperature are also presented.

The nomographs, graphs and tables can be used, singly or combined, in lieu of numerical calculation for the solution for Arrhenius parameters, or the computation of rate constants.

A computer program included in …

Incineration Of Solid/Liquid Human Waste, Theodore Joseph Wayne

Theses

This thesis encompasses the design criteria required to produce an effective incineration system for the disposal of solid/liquid human waste. Coupled with the overall design parameters is an investigation of the chemical decomposition of the waste during the incineration process, odor treatment and control, and the physiological effects on the human body due to the inhalation of the toxic gases given off during the combustion of human waste.

The variables involved in the combustion process are studied and equations presented that relate the combustion variables of flame temperature, residence time and air requirements. These equations are tested based upon published …

A Simulation Model Capable Of Performing The Calculations Involved In Defining A Crude Preheat Train, Robert G. Parker

Theses

A simulation model has been developed for a system of ex changers to preheat the feed to a crude distillation unit. In conjunction, a Fortran program for the performance of the model calculations by digital computer was written. Two types of preheat system were simulated, a single train system and a split (or parallel) train system. A number of features were included in the program for flexibility and versatility. A particular effort was made to have the model represent as economical a preheat system as possible.

The model program was used to obtain computer-calculated results for both single-train and split-train …

Sidelobe Suppression In Chirp Radar Systems, Stephen N. Honickman

Dissertations

Pulse radars extend target range detection by increasing the transmitted pulse width. On the other hand, target resolution is enhanced by reducing the system pulse width. These dichotomous requirements led to the invention of chirp radar systems which achieve greater target resolution for a given detectable range by frequency modulating the carrier frequency of the transmitted pulse. Along with the advent of chirp radars came the extremely simple and reliable technique of chirp signal generation known as "passive generation". However, one of the undesirable features of "passive generation" lies in the infinite time required for transmission of the resultant pulse, …

Local Mole Fraction Equations For The Excess Free Energy Of Mixing, Jose Mario Marina

Dissertations

An extensive study of local mole fraction equations aimed at obtaining a two parameter expression for the Excess Free Energy of miscible and immiscible systems has been undertaken.

Initially our approach was to modify existing equations by substituting those parameters reflecting interaction between like molecules by the pure component energies of vaporization. This resulted in a one parameter modification of the three parameter Wilson equation, which correlates data poorly and a two parameter modification of the NRTL equation which correlates binary miscible data with fair accuracy. A modification of the Scatchard-Hildebrand equation, where mole fractions are substituted by local mole …

Nucleus 1971, Newark College Of Engineering

Yearbooks

This is a digitized, downloadable version of the Newark College of Engineering Nucleus.

A New Technique For Steady State And Transient Analyses Of Incompressible Flow Networks, George V. Catanzaro

Theses

A new technique for the calculation of the transient or the steady-state mass flow rate and pressure distribution in incompressible flow networks is presented. Employing the matrix method of network analysis, the nodal continuity and branch momentum equations are solved simultaneously to obtain explicit relations giving the unknown nodal pressures and branch mass flow rates. In this manner, the transient or the steady-state behavior of incompressible flow networks with arbitrary configuration having nodal sources and sinks as well as branch transducers can be determined. In contrast with the conventional steady-state network analysis methods, the new technique can be extended to …