Digital Commons Network^™

Design For A Developing Consortium, Henry A. Mauermeyer

Theses

The number of consortia in American higher education expanded rapidly from only ten in 1960 to eighty in 1973. Many do not have an organized method of developing interinstitutional cooperation, structuring their internal management, or preparing to meet future expansion.

The design of an organizational process appropriate to consortia in general has been developed in this thesis. The design is based on an analysis of various materials: (1) literature on the consortium movement; (2) data gathered from a nationwide survey conducted by the author; (3) visits with directors of consortia and experts in the consortium field; (4) actual working experience …

The Design And Implementation Of A Time-Shared Computer Based Construction Cost Estimating System For An Electric Utility, Thomas Arnold Westphal

Theses

The work of the distribution department of an elec tric utility involves a great deal of medium to heavy construction. This work is vital to serve the energy needs of the public. An electric utility constantly builds, reinforces, and repairs electric distribution facilities. The material and labor used to accomplish this construction is expensive. Money in sufficient amounts is seldom, if ever, available to finance all proposed construction projects. Therefore, the cost of proposed projects must be estimated in advance, so that management may decide on an economic basis which projects will be authorized.

The need for accurate construction cost …

Steady State And Dynamic Performance Of Anisotropic Reluctance Motor, S. Chandrasekhara Rao

Theses

The paper deals with a special type of reluctance motor called Anisotropic rotor reluctance motor. As the name implies, advantage is taken of the internal anisotropy of the rotor magnetic structure. Axially laminated grain oriented silicon steel is used in the rotor. This unconventional configuration of assembly of rotor laminations results in a high ratio of direct axis to quadrature axis reluctance. Compared to the conventional reluctance motor, pull out torque of more than three times and a power factor as high as in an induction motor is obtained. Several motors of ratings up to 60 HP. were built and …

Design Of Multipass Fractionating Trays, Paul W. Becker

Theses

Multipass fractionating trays are vapor-liquid contacting devices with high liquid handling capabilities which can be economically used in large fractionating towers. However, process design engineers in the chemical and petroleum industries seem to have an aversion to specifying multipass trays for their tower designs. This thesis presents the case for using multipass trays as well as methods for their design.

Because multipass trays are not symmetrical, as one and two pass trays are, the liquid and vapor need not split equally between the three or four passes. Equations are developed which enable the vapor and liquid flowrate for each pass …

Absorption Of Methoxyflurane By Conductive Rubber And Polyethylene Anesthetic Hose, Edward A. Kippel

Theses

This thesis presents the results of an investigation into the absorption of methoxyflurane by conductive rubber and polyethylene anesthetic hose. Previous studies are reviewed and theoretical considerations governing the diffusion process are discussed.

Diffusion coefficients are calculated for commercially available hose materials using different anesthetic concentrations and oxygen flow rates.

Data obtained is compared with the results of previous investigations (primarily concerned with sorption into rubber hose) and similar results are presented for polyethylene hose.

Graphical data is used to demonstrate the effect of hose material on inspired anesthetic concentration.

The advantage of disposable conductive polyethylene hose over reusable rubber …

An Experimental Study Of The Separation Of Multicomponent Mixtures Via Thermal Parametric Pumping, Wayne Weywen Lin

Theses

A thermal continuous parametric pump for separating multi-component mixtures was experimentally investigated using the model system toluene-aniline-n-heptane on silica gel adsorbent. A simple method for predicting separations is presented and is found to be in good agreement with the experimental results. The method, based on an equilibrium theory, is under the assumption that a multicomponent mixture contains a series of pseudo-binary systems, each system consisting of one of the solutes as one component and the common inert solvent as the other component.

Densities Of Polar And Non-Polar Compounds And Their Mixtures, Peter Norman Notwick

Theses

Two principal studies were conducted as part of this thesis: evaluation of existing correlations for predicting densities of polar and non-polar liquids and their mixtures and experimentally measuring the densities of certain liquid systems.

Utilizing a modification of the simple picnometer experimental method, data were obtained for both pure compounds and liquid mixtures. Comparison of the pure compound data with available literature sources established the reliability of the technique.

The results of the correlation comparison indicate that the Riedel equation, is the most generally reliable for predicting the densities of pure "normal" compounds. Lydersen, et al., prepared tables for the …

An Experimental Study Of Parametric Pump, Khalid Omar Ranginwala

Theses

In this research for Master's Project, the possibility for separation of glucose and fructose by parametric pumping was investigated. In this research activated carbon was used as adsorbent. First Langmuir's isotherms for glucose and fructose were experimentally found. These results were utilized in the thermal parametric pumping. The pump was run semicontinuously. Parametric pumping was also carried out with KCl +H₂O solution using a resin as adsorbent, and the 'b' value of KCl was found.

A Study Of Fluid Flow Entering A Sharp-Edged Channel, Rocco Racano

Theses

Experimental investigations were carried out on an newtonian fluid In the two dimensional case through the regions of a sharp-edged entrance and exit. Qualitative and quantitative results were compared to a variation of a two dimensional case of converging flow in a capillary as originally derived by Oka and proposed by Philippoff. In addition velocity profiles were taken in the entrance region. Furthermore, the effect of temperature gradients in the slit region with their resulting optical effects were considered. The methods used to obtain these goals were photoelasticity and streak photography.

Results were four, to be consistent with the theory …

An Experimental Study Of Equilibrium Parametric Pumps, John A. Park

Theses

Parametric pumping is a separation process characterized by periodic changes in axial displacement, coupled with synchronized changes in some variable affecting the position of the interphase equilibrium. Both continuous and semicontinuous pumps were investigated at various operating conditions using a model system of toluene-n-hep-tane on a silica gel adsorbent. It has been shown that when the penetration distance for the cold cycle is less than or equal to that for the hot cycle and the height of the column, the pump has the capacity of complete removal of solute from one product stream. A quantity which is important in determining …

Newark College Of Engineering Graduate Programs 1974-75 Academic Year, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

Separation Of Gas Mixtures Via Batch Parametric Pumping : A Theoretical Study, Jose G. Lopez

Theses

An equilibrium plug?flow model, for the batch isothermal separation of a binary gas mixture in a pressure changing parametric pump, was investigated for the system propane?argon on carbon, with the aid of a G. E. Pack 4020 computer. Separation factors comparable to a temperature changing parametric pump are predicted by the model. A change in pressure of the gas mixture may be carried out very rapidly, compared with a temperature change of similar magnitude. The effects of temperature, pressure, concentration, and penetration are discussed.

Dynamics Of Interconnected Systems With Pulse Frequency Modulators, Halil Ozcan Gulcur

Dissertations

The objective of this dissertation is to study the dynamics of systems consisting of interconnections of an arbitrary number of complete-reset pulse frequency modulators (CRPFM's) and linear dynamical subsystems (in general, time-varying, lumped and/or distributed). CRPFM, which represents a generalization of several types of pulse frequency modulators (PFM's), consists of two basic components; a multi-input dynamic element, called the timing-filter (TF) and a threshold device (TD). Whenever the output of the TF reaches a given threshold value the TD generates an impulse and, at the same time, resets all the states of the TF to zero. This dissertation is devoted …

The Effect Of Variation In The Ratio Of Specific Heats With Temperature And Pressure On Horsepower Requirements Of Reciprocating Compressors, Selim Piskin

Theses

The expansion and compression of fluids is discussed in relation to the design of reciprocating compressors. As part of this thesis, the design equations for reciprocating compressors are developed for both ideal and reel gases.

The resulting design equations contain, as one of the parameters, the ratio of the specific heats. Using published componential specific heat data, a correlation was developed relating the dependence of the ratio of specific heat on temperature and pressure for the nore common gases. These correlations were developed so as to be compatible with the compressor design equation and to provide rapid evaluation of the …

Correlation Of Drain Breakdown With Excess Noise And Other Surface-Related Phenomena In Enhancement Mosfets, Jerry J. Rij

Theses

An investigation of semiconductor surface-related phenomena has been undertaken to correlate 1/F noise with drain breakdown in P-channel enhancement MOSFET's. Increases in the intensity of drain current fluctuations at 10Hz and at 1KHz, particularly at the higher frequency, was observed following accelerated life-testing for threshold voltage drift. It was also concluded that mobile ions near the oxide-semiconductor interface produce a sharp increase in fast trapping centers. It was also found that 1/F noise intensity consistently peaked at the threshold of drain breakdown and that it steadily decreased with further increases in drain current. Of all the transistors tested, those with …

Rubbery Acrylic Polymer Adhesives, Steven Walter

Theses

This study shows how rubbery acrylic polymer adhesives can be used to adhere rubber substrates to each other. Two substrate rubber compounds were used. A styrene-butadiene copolymer and a styrene-acrylonitrile copolymer. The adhesives were homopolymers based on polybutyl acrylate and poly2-ethyl hexyl acrylate.

Two reference standards were used. The first was commercial rubber based, solvent cements. The second was commercial acrylic solution polymers. All experimental work was compared to these standards. An attempt was made to optimize the adhesive components, as well as the adhesive application procedures and curing conditions.

A primer coating consisting of polymer, monomer, and catalyst was …

Biocatalytic Oxidation Of Nitrilotriacetate, Saul Hammerman

Theses

The specific scope of this work is to study the biological and chemical effects of a single genetic strain of bacteria, Bacillus subtilis #9524, on the specific destruction to innocuous products of sodium nitrilotriacetate (NTA) and sodium tripolyphosphate (STPP). Insofar as the same strain of bacteria was used each time, under limited variability and sterile conditions, the side effects of multiple bacterial strains and their inter-relationships among themselves and the organic substrates are eliminated. This has allowed for excellent replication of results.

This is a generalized technique for the evaluation of the biodegradability of a compound. Whereas tests with activated …

Newark College Of Engineering 1973-74 Undergraduate Programs, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

Adaptive, Differential Pulse-Code Modulation For Speech Processing, Peter Cummiskey

Dissertations

The objective of the research reported here is the design of efficient speech coders that can easily be implemented in integrated circuit hardware. Companding techniques like those introduced by M. R. Winkler, J. A. Greefkes, F. DeJager, A. Tomozawa and H. Kaneko were explored along with a large body of theory concerning the application of linear prediction to speech coding.

The best features of the speech signal to be measured and coded are the overall amplitude, the resonant frequencies and dampings of the vocal cavity and the fundamental frequency of the vocal cord oscillations. Adaptive quantization was used to track …

A Simulation Modeling Approach To Central City Dynamics, Leonard William Schaper Jr.

Dissertations

This dissertation describes a computer simulation model of a central city with emphasis on its application to Newark, New Jersey. The work begins with a review of the Forrester Urban Dynamics Model; the first attempt to simulate the entire system of the city. The objections to this model which have appeared in the literature are discussed, and the model is viewed in the light of other work in the field. A set of guidelines to aid the "second generation" model building effort is developed. The actual construction of a model which attempts to follow these guidelines is described. First, the …

Representation And Characterization Of Thixotropic Fluids, Huei-Hsiung Wang

Dissertations

Thixotropy is a time-dependent rheological behavior of a group of fluids which are characterized by an isothermal reversible breakdown induced by a mechanical disturbance. Based on this definition, a mathematical model of reversible degradation kinetics is set up. Its development leads to two equations which represent quantitatively the hysteresis loop and torque-decay curve. These equations consist of five independent parameters with their physical meanings. These parameters can be used to characterize the properties of thixotropic materials.

The original Weissenberg Rheogoniometer was modified to measure the thixotropic behavior of blood with the step change and the ramboid change of shear rate. …

The Effect Of Ultrasonic Vibrations On Heterogeneous Catalysis, William Lintner

Dissertations

The effect of ultrasonic vibrations on the vapor phase decomposition of cumene to benzene and propylene was investigated employing silica-aluminum cracking catalyst.

The catalytic reactor consisted of a 1 cm. diameter stainless steel tube containing a 20 in. long preheater and a 4 in. long catalyst chamber. The catalyst bed was irradiated from above by means of an ultrasonic horn which transmitted acoustical energy directly into the vapor.

The reactor was run at temperatures of 650°F. and 1050°F., frequencies of 26,000 cps and 39,000 cps, feed rates of 20 to 600 gms./hr., power outputs of 0.5 to 1.3 watts/cm.^{2 …}

The Quantitative Characterization Of Middle Distillate Fuels For Reduced Smoke Emission And Improved Low Temperature Operability, R. S. Feamster

Theses

Forty-eight inference equations are presented to approximate the hydrocarbon composition of middle distillate fuels and of the solids separating from these fuels at temperatures below their cloud points by consideration of fuel physical inspections. The physical inspections consist of API gravity, aniline point, cloud point, and distillation curves for ten fuels from major United States and European refineries. To determine the percentage of solids separating from cooled fuels, each fuel is filtered over a temperature range from the cloud point to -40 F in 10 F increments. Aromatic, naphthenic, and paraffinic hydrocarbon contents and the r-paraffin carbon number distributions of …

Stress-Relaxation Of Cross-Linked Polyethylene At Elevated Temperature, Ravio Luik

Theses

Polyethylene because of its excellent chemical, physical, mechanical and electrical properties, as well as its easy adaptability to extrusion, molding and other processes and its low cost has become a very widely used material for hundreds of applications. But, because it is a thermoplastic, it also deforms and flows when temperatures approach or exceed the crystalline melting point. This handicap, however, can be reduced by crosslinking the polymer chains and thereby converting the thermoplastic to a thermoset material. To further expand the possible uses of this popular material and to further improve the properties, fillers and antioxidants may be compounded …

The Photolysis Of P-Xylene In An Aqueous Environment, Joseph Daniel Lintott

Theses

The photolysis of p-xylene in several aqueous solutions was studied as a model for removing refractory organic pollutants from water, and to demonstrate that photochemical reaction of these compounds may be an important factor in their degradation in the environment.

Solutions of p-xylene in deaerated water, water saturated with oxygen, 0.05M sodium phosphate tribasic, 0.1M sodium nitrate and 3.28X10^-4M ferric sulfate were exposed to ultraviolet and visible radiation. p-Xylene in 3.28X10^-4M ferric sulfate was also exposed to sunlight. The reaction rate was determined by measuring the disappearance of the p-xylene.

In all of the photolyses, except …

The Photolysis Of Chlorobenzene In An Aqueous Environment, Louis John Del Tufo

Theses

Chlorobenzene was chosen as a model system for the study of photochemically induced reactions in an aqueous environment. It was the goal of this research to achieve a reaction system which best approximates conditions existing in the environment. To do this, a basic model system was established, and then the effect on the rate by various parameters was studied. These parameters, which included the presence of oxygen and such inorganic compounds as might be present in receiving waters, (e.g. nitrate, sulfate, and phosphate), were chosen so as to meet the goal of this research.

Kinetic data was obtained for seven …

A Theoretical Study Of Continuous Parametric Pumping At Constant Temperature, Philip Weingartner

Theses

A continuous parametric pump, operating at constant temperature with pressure as the driving force, is analyized by means of an equilibrium theory. A thorough explanation of the process and the resulting mathematical model reveal how the parameters effect pump performance. The experimental data cited agree well with the analytical results in the CO₂-He on silica gel system. Complete removal of the solute from one of the product streams can be achieved through the proper selection of penetration distances and pressure levels.

Distillation Design Techniques, Ronald Michael Carlucci

Theses

A design method for binary distillation systems is presented that minimizes the required rigorous calculations. A computer program is developed that finds the number of theoretical stages, and feed stage for a specified separation and reboiler vapor rate. Results for three binary systems are presented.

The design method and computer program are extended to the multicomponent case at the condition of total reflux. Results for one ternary system are presented. The possibility of using the method at other than total reflux is discussed. Usage of the method to search for multicomponent azeotropes and results are also presented.

Analytic equations are …

Antoine Type Equation For Liquid Viscosity Correlations, Edward Goletz Jr.

Theses

A modified Andrade⁴ equation, similar to the Antoine equation for vapor pressure-temperature correlations, was developed for liquid viscosity-temperature correlations. Included in the investigation were the following compounds: n-alkanes (C₂-C₂₀), n-alkenes (C₂-C₂₀), n-alkyl benzenes (C₆-C₁₀), n-alkyl cyclohexanes (C₆-C₂₂), and fifteen polar compounds. Except for propene, errors of less than 5% were obtained. Normal heptadecane was used to compare correlations developed by Andrade⁴, Walther²⁰, and Doolittle⁹, with the modified Andrade equation. The latter was found to give the best …

A Computer Solution For Absorbers And Strippers Using The Newton-Raphson Iterative Method, Robert J. Lukach

Theses

The solution of absorber or stripper calculations by traditional methods can be a tedious, time consuming, if not a completely fruitless procedure. Hence a computer solution of these calculations is both desirable and, as the complexity of chemical process plants increases, necessary.

The component oriented Newton-Raphson procedure was programed to perform this calculation, and makes full use of the material and enthalpy balance equations to perform the iterative equilibrium stage calculations. A Newton-Raphson stage oriented method was also developed as a verification program to check the solutions obtained from the Newton-Raphson component oriented procedure.