Digital Commons Network^™

The Biochemical Fuel Cell : Conversion Of Waste To Energy, Charles August Mielke

Theses

A batch biochemical-fuel cell was constructed and studies on the production of bioelectric energy using an alga Scenesdesmus quadricauda, and a bacterium Desulfovibrio desulfuricans, were conducted. Results were compared for a steady state cell using various concentrations of media components and showed that a 1000-fold increase in the concentration of media components produced a net potential output of 0.03mv/ml compared to an initial output of 0.02mv/ml. Further studies showed the biochemical net potential output using activated sludge from a waste treatment facility was 0.01mv/ml compared to 0.02mv/ml for the cell using the initial media concentration.

The system exhibited steady state …

Gas-Phase Reaction Of 1,2-Dichloroethane With Hydrogen In A Tubular Flow Reactor, Wei-Lian Lee

Theses

We have studied the reaction of 1,2-dichloroethane with H₂ in three tubular flow reactors of different diameters at atmospheric pressure in the temperature range of 550° C to 1000°C. The kinetic parameters and product distribution were experimentally determined for each size reactor. The wall and bulk reaction rate constants were decoupled via analysis of three different surface to volume reaction data.

The experimental reactor was an isothermal tubular flow reactor that operated within the domain of plug flow region. The reaction was found to follow first-order kinetics with respect to 1,2-dichloroethane when in the presence of excess hydrogen. The …

Thermal Decomposition Of Chlorobenzene In An Atmosphere Of Hydrogen, Edward Robert Ritter

Theses

The thermal decomposition of chlozobenzene was investigated in a tubular flow reactor at 1 atmosphere total pressure and average residence times of 0.02 - 2.5 seconds. The temperature range from 800 - 1010°C was studied in both a reductive atmosphere of hydrogen and an inert atmosphere of heIium. Complete destruction of chlorobenzene occurs at about 1000°C for an average residence time of 1 second in hydrogen gas. In the inert gas, the complete destruction of the reagent was not observed in the range of conditions which were studied. The major products observed for pyrolysis in hydrogen were benzene, HCl, and …

Logic Simulation And Methodologies For Design For Testability, Ravi Shankar Prasad Mallampalli

Theses

This thesis describes the method used for developing the standard TTL blocks using the logic simulator SPLICE1. It also gives a comprehensive overview of methods which can be used for designing a circuit which is testable. A format called Electronic Design Interchange Format (EDIF) is also described as a tool which can be used for transporting design data in the VLSI indgstry.

Multi-H Continuous Phase Modulation : Its Properties And Analysis, Jyung-Cheng Chen

Theses

Multi-h CPM, a generalization of CPFSK and also one of the so-called Combined Modulation and Coding schemes, is useful in digital communication systems where both the bandwidth and power are constrained. The increased signal processing complexity, which can be viewed as the third communication resource, is used to trade for both power and bandwidth, and to approach the error-free communication promised by Shannon's theorem.

The transmitted multi-h CPM signal carries a coded sequence of continuous phase changes; the possible phase states form a cylindrical trellis in phase and time, in which the modulation indices are reused in a cyclical fashion. …

A New Density-Dependent Mixing Rule For Equations Of State, Theodore John Shatynski

Theses

A general procedure for the development of density-dependent mixing rules is demonstrated. This method is used to obtain a density-dependent local-composition mixing rule based on an extention of the work of Knox et al (1984). The resulting expression is tested with the Soave-Redlich-Kwong equation of state. Results for normal and cryogenic vapor-liquid systems for both one-parameter and three-parameter versions of the mixing rule are compared with results using the classical mixing rules.

The Virtual Classroom: Building The Foundations, Computerized Conferencing & Communications Center, Starr Roxanne Hiltz

Computerized Conferencing and Communications Center Reports

This is a report on the first year of a three-year project concerned with the development and assessment of new types of software capabilities designed to support university level courses. A "virtual classroom" or "university without walls" is being created within a computerized conferencing system. During the first year of the project, students in twelve courses at three universities completed part or all of their coursework online. Pre and post-course questionnaires and automatic monitoring of their computer-mediated communications are the main sources of data. Independent variables include the expectations and attributes of the individual students; characteristics of the particular hardware …

Tests On Square Reinforced Concrete Members Under Combined Biaxial Bending And Tension, Bhadresh Shah

Theses

The research reported herein studies the ultimate strength behavior for square-shaped reinforced concrete short columns under combined biaxial bending and tension that is a common design problem. The present ACI building code (ACI 318-83) (1) and design hand book (2) do not offer an insight into the determination of strength and ductility behavior of biaxially loaded reinforced concrete columns. A design equation developed by Hsu (3,4,5 ) to study the ultimate strength behavior and failure surfaces for members under these combined action was used and the computed results were compared with the present analytical results and experimental results for square-shaped …

Analyze3d, A Structural Analysis Program Employing Membrane And Solid Finite Elements, James Mendham Gathercole

Theses

The purpose of this thesis is to describe the addition of an 8 and 20-node isoparametric brick element to the finite element program ANALYZE, permitting three-dimensional analysis. The reason for the addition is that even though Analyze is a relatively simple program, its simplicity makes it a good educational tool for finite element courses. The added brick element expands the use of the program for educational purposes.

In its original form, Analyze is a finite element package for static structural analysis developed at Wright Patterson Air Force Base. The program consists of four finite elements: (1) bar, (2) membrane triangle, …

The Effect Of Systemic Arterial Pressure On Microvascular Flow And Transcapillary Exchange Of Macromolecules In The Hamster Cheek Pouc, Govind Mohanlal Gawdi

Theses

Microvascular flow velocities and transport of macromolecules were studied in the hamster cheek pouch under control and acute high arterial pressure conditions, with or without topical (local) application of the vasodilating agent, bradykinin. Mean arterial pressures of 130-160% control were attained by intravenous renin infusion. The microcirculation of the cheek pouch was studied using intravital microscopy. Areas with arterioles and venules were recorded on a videotape for later analysis of red cell velocity, using an RBC tracking correlator, and vessel diameter using a video shearing monitor.

In addition, vascular permeability to macromolecules was studied in the hamster cheek pouch vascular …

Theoretical Investigation Of Submerged Turbulent Jet, Talal N. Hindi

Theses

A theoretical investigation concerning the flow characteristics velocity distribution of a circular submerged turbulent axisymetricic water jet impinging on a flat plate was carried out. Starting with the use of the available data and equations obtained by previous investigators and found room for improvement. By solving these equations for the velocity distribution and comparing them to the experimental results is was found out where improvements of the analysis were were necessary. Then taking Tollwien's solution for the velocity distribution and changing the reference axis to see whether or not the equations would give better results for velocity calculations. With certain …

Zeta Potential Measurements Of Biological Flocs Using A Streaming Potential Cell, Wayne James Gallagher

Theses

A streaming potential apparatus was assembled and tested. Its purpose was to characterize the surface of biological flocs in a wastewater environment. Samples of mixed liquor were obtained from the Passaic Valley Sewerage Commissioners wastewater treatment plant in Newark, New Jersey. Filtered mixed liquor was passed through a bed of the floc particles in the streaming potential cell, and the electric potential across the cell was measured as a function of the differential pressure drop. From these data, the zeta potential was calculated using the Helmholtz equation. Values of -0.88 and -0.44 millivolts were obtained for two mixed liquor samples.

Reliability Of Dielectrics : Using Noise As A Diagnostic Tool, Ramesh K. Jain

Theses

The aim of this thesis is to develop a screening method to predict the reliability of a dielectric material. The screen chosen is an electrical noise. The dielectric material studied is varnished fibre glass cloth material supplied by Westinghouse Electric Corporation.

The dielectric material will have varying amount of voids, crystal defects, and surface contaminants impurities introduced during manufacturing process. On application of the electric stress, ionization (corona) will take place. The corona degrades the material due to thermally generated heat, chemical reactions in the voids and ionic bombardment of the material.

An experimental set up is developed to monitor …

The Modeling Of A Self-Oscillating Dc-To-Dc Converter, Frank Andrew Linkowsky

Theses

This thesis develops a model of a nonlinear self oscillating current-or-voltage step-up dc-to-dc converter. Expressions are given that predict the operation of the converter in the time domain and in the state plane. To verify these expressions, a large signal computer simulation technique [1] is used to compare theoretical results with actual measurements. This type of simulation allows a nonlinear switching converter to be modeled with a series of piecewise-linear operating intervals. The resulting waveforms predicted by the developed model show close agreement with waveforms found in the laboratory. Therefore, the model represents a powerful tool that may be used …

A Tracheoesophageal Puncture Voice Prosthesis, Georghios Makris

Theses

A voice prosthesis was developed that allows verbal communication of laryngectomised patients. The prosthesis requires a superiorly directed tracheoesophageal puncture in which the periscope mounted on the tracheal stoma vent is introduced. The prosthesis is operated by air injection through the periscope. Air injection is achieved by pulmonary pressure after the occlusion of the stoma vent. Stoma vent occlusion can be achieved either by the patient's finger or by the designed cover valve mounted on the prosthesis. The cover valve allows free breathing, hand-free prosthesis use, and it can release excess pressure during coughing. Periscope valve air resistance tests have …

Investigation Of Water-Binding Properties Of Industrial Sludges Using Thermal Analysis As A Monitoring Tool, Ron Josephson

Theses

As part of a program to develop new and more cost-effective dewatering approaches for industrial hazardous wastes, sludges and synthetic "model" materials were analyzed by thermal methods in an attempt to comprehend their water-binding qualities and differentiate free and bound water. These thermal methods included Differential Thermal Analysis (DTA), Thermogravimetric Analysis (TG), and Differential Scanning Calorimetry (DSC). Industrial sludges and laboratory models were compared using both standard heating techniques and subambient cooling (to -60°C). This latter technique provides direct indication of the amount of free water. This information can be very useful in evaluating and improving dewatering techniques for industrial …

Gallium Film Formation By Ion Cluster Beam Deposition, Te-Chuan Hsu

Theses

Gallium thin films were deposited by Ion Cluster Beam (ICB) from pure gallium. This research had two objectives: to develop a practical method of crucible heating to generate gallium clusters; and to investigate the influence of ICB system parameters on the formation of clusters and film properties. An electron-bombardment crucible heater with a novel construction was designed. The top section of the carbon crucible was kept at a higher temperature than the middle section to prevent clogging of the nozzle and " spitting " phenomena which were found to occur with the conventional design. Crucible temperatures up to about 1360°C …

A Theoretical Study Of Pure And Simple Competition Between Two Microbial Species In Configurations Of Two Interconnected Chemostat, Cheng-Ming Kung

Theses

It is known that two microbial populations competing purely and simply for a common substrate cannot coexist in a steady state in an environment which is spatially homogeneous. Hence they cannot coexist in a chemostat something which implies that a mixed culture of two pure and simple competitors cannot be maintained in a single ideal reactor in a steady state. The present study investigates theoretically pure and simple competition between two populations in two interconnected chemostats. Three reactor configurations are considered and analyzed. It is proved that two pure and simple competitors can coexist in a steady state in both …

Fluid Flow And Gas Absorption In An Ejector Venturi Scrubber, Iclal Atay

Dissertations

Empirical models were developed to describe the fluid flow characteristics and gas absorption efficiency of an ejector venturi scrubber. The empirical constants were determined experimentally using stop action photographs of the spray, static pressure measurements, and sulfur dioxide absorption efficiencies.

To take photographs of the spray, a 2 foot high, clear plastic ejector venturi scrubber was used, with a 4 inch diameter gas entrance port. Photographic equipment included a Hasselblad camera, Xenon flash lamp, and Polaroid 667 ASA 3000 film. Exposure duration was about 1 microsecond, resulting in complete stop-action of the spray droplets at liquid rates up to 6 …

Nucleus 1986, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the Newark College of Engineering Nucleus.

The Design Of An Order Processing System, Michael Montrose

Theses

The writer of this thesis was once involved in the order processing function with the company studied and recognized that there is a need for a better method of processing customer orders that could be applicable to other companies.

The company studied is considered a "high tech" company, meaning that it is engaged in the design; manufacture, and sale of the latest state of the art products that employ modern computer technology. It is ironic that this company, on the leading edge in its field; is in great need of reform in the office methods used to order its products. …

An Inventory Model For The Specialty Chemical Industry, Paul Murchison

Theses

The specialty chemical industry is a unique segment of the chemical industry. This industry produces chemical intermediate products for the pharmaceutical, agricultural, cosmetics, and other chemically related industries. Most of the products that are produced are covered by patents or involve proprietary know—how. The specialty chemical products are a minor part of a total formulation but contribute unique properties to the end product. This feature of specialty chemicals gives the manufacturer unusual pricing power compared to producers of commodity chemicals. This industry has proven to be very competitive, profitable and in the forefront of the present automation revolution over the …

Waveform Analysis Using A Micro Computer, Dakshina K. Murthy

Theses

Harmonic analysis through a micro computer was performed at Brookhaven National laboratory to determine the magnitude and extent of hormonic dIstortionon in their electrical power supply system. DT 2801 Hardware and MADCAP software were used to accomplish the Harmonic anylysis through forier transform.

The Dielectric Slab-Wedge Antenna, B. Keith Christensen

Theses

A theoretical model and numerical investigation of the directive gain of a dielectric slab-wedge radiator is presented. The model is based on a union of the classical dielectric slab equations, local mode theory, and equivalent current distribution treatments of the truncated dielectric slab and wedge geometries.

The far field is developed from the sum of two current distributions. The slab region, up to the transition plane between slab and wedge, is replaced by equivalent electric and magnetic surface current densities. The wedge contribution is developed from a volume polarization current distribution.

Conservation of power is used to approximate the field …

Thermal Energy Storage Using Phase Change Material With Multi - Melting Temperatures, Christakis Christodoulou

Theses

Three different models are developed in this investigation, for the study of thermal energy storage, using a phase change material with multi-melting temperatures. Using Model B as the basis, the developed partial differential equations are numerically solved by a finite difference method. Two computer programs were written based on that solution, one for the charging mode and one for discharging. Finally, using the computer programs, a set of results was obtained for both charging and discharging, utilizing calcium chloride hexahydrate as the phase change material with constant and multi-melting temperatures.

Technology Transfer Between Developed And Developing Countries, Tenny Oghogho Ogbomo

Theses

The problems arising from technology transfer, in general, are not new. The problems of the East-West technology transfer, for example, are based on the risk that such transfers will enhance the military capability, or at least the military potential, of the trading partner. In the case of United States trade with the Soviet Union, it can be said that any accretion in the Soviet military capacity weighs against the United States in an overall world-wide balance of power. The restrictions and/or prohibition of such transfer of technology are problems themselves.

The North-South technology transfer, in other words, the technology transfer …

Computer-Aided Design Of A Waveguide To A Suspended Stripline Transition For Millimeter-Wave Applications, Hsin-Yen Peng

Theses

Realization of millimeter-wave systems on suspended striplines necessitates transitions from such lines into waveguides for measurements and other purposes. Transition can be obtained through coupling TE10 mode in the waveguide into a TEM mode in the suspended stripline. A continuous transition using tapered complementary unilateral finline and two gradually increasing conducting tapered ridges is studied here. The tapered region is modelled using a number of uniform sections with gradually changing cross sections. The junction separating the tapered section from the suspended stripline is modelled via physically and electrically continuous terminations. Physical continuity approach is more flexible for manufacturing purpose at …

Human Resources Planning In Construction Through Operations Research, Maria Pyla-Christodoulou

Theses

The purpose of this thesis is to examine different methods in the allocation of human resources in construction, using decision making through Operations Research. The methods described are divided into methods using mathematical models, and methods using heuristics. The mathematical models yield the optimum solution, while heuristics result in a satisfactory solution which can be improved by applying the optimization procedures described herein.

The human factor in construction is also examined, and methods of improving motivation among the construction workers are discussed.

Preparation And Testing Of Novel Blocked Isocyanate Dental Adhesives Based Upon Hydroxyhexylmethacrylate, Gururajan Rao

Theses

In this study dental adhesives synthesised from TDI/HHMA/pentaerythritol, with either of the blocking agents namely eugenol, o-methoxyphenol, p-cresol or o-chlorophenol were tested. Bond strengths in dentin as influenced by spacer molecules were tested. Comparison studies to determine this were performed using the same blocking agents and TDI/HEMA/pentaerythritol. The effects of i. post-extraction time and ii. dentin depth on bond-strengths were tested using two monomers: o-methoxyphenol/ TDI/HEMA/pentaerythritol and p-cresol/TDI/HEMA/pentaerythritol 1. From teeth recently extracted (2h) vs dentin aged from one to six months 2. From dentin cut from three different levels within the tooth.

The prepared dentin-adhesive samples were stored in …

On-Line Analysis Of Highly Coherent Brain Activity During Transcendental Meditation And Automated Biofeedback, Deepak Dinkerrai Rawal

Theses

Occurance of highly coherent brain activity (EEG) specific to the meditation has been reported in the literature. The present thesis is an effort to look into the mechanics of meditation using the recent technique of analysis of high coherence in the EEG. Based on previous work, reporting increased EEG coherence during practice of Transcendental Meditation, a closed loop model and hypothesis is proposed using biofeedback to close the loop. The hypothesis proposes that very high coherence in the EEG is a very significant neurophysiological parameter, reflecting instantaneous quality of meditation in the form of an average high coherence above threshold. …