Digital Commons Network^™

Determination Of Project Duration For Resource Constrained Projects Without Using Resource Scheduling Procedure, Rabindra Nath Karmakar

Theses

The problem addressed in this thesis is that of determining the practicability of equating measures of network and resource characteristics to the early finish date of a project which is constrained by resources. The output of standard critical path calculations along with information on resource profiles that are easy to calculate can be of use in estimating resource constrained project duration.

Twenty two different equations ( developed by Hall) were used to find the estimated project finish dates. These results were compared to the schedule resulting from the application of the heuristic rule of minimum activity float. It is shown …

Failure Mechanisms Of Hermetically Sealed Solid Tantalum Capacitors, Syed R. Kazmi

Theses

This study has determined the failure mechanisms of solid tantalum capacitors and their causes. It was observed that high leakage current and electric shorts are the most prominant modes of failure. The experimental data has proved that humidity and high temperature are the factors which promote these kinds of failures. It is also stablished that change in electrical parameters due to exposure to harsh weather are reversible. Vacuum treatment to such capacitors helped in improving their electrical characteristics.

Investigation Of A Technology For Glass Shaping By The Use Of Abrasive Waterjet, Wu-Tzung Lee

Theses

This study investigates the effects of AWJ properties on the results of glass machining and examines the feasibility of contour glass cutting. The principal defects of AWJ glass cutting are identified. A practical technique to prevent defects and to improve the quality of the glass surface is presented. A computer package was developed to provide a computer-aided programming function, a control program transformation fuction, and a object image operation function. Throughout the programming function, robot control programs can be generated to improve cutting quality and cutting speed. The transformation function can be used to change the programming modes or the …

Apap: The Arithmetic Pipeline Analysis Package, Chang-Chieh Lin

Theses

This study is aimed at the development of an interactive PC-based package for simulating data flow within an arithmetic pipeline in multiprocessor systems. The user constructs the arithmetic pipeline, specifying the functionality of each segment, the intersegment connectivity and pipeline inputs and outputs. After defining reservation tables and data, analysis is performed with the results available in tabular, simple graphic and animated graphic forms.

APAP allows the user to design hardware and analyze its functionality with-out building the circuit, an economical alternative. Even when circuits are to be built, APAP allows the user to correct logic errors before implementation, leaving …

An Analysis Of The Second-Order, Type-One Hilbert Phase-Locked Loop, Inn-Shian Lin

Theses

In this thesis, a second-order, type-one PLL ( Phase- Lock, Loop ) in which the usual lead-lag loop filter is paralleled with a Hilbert Transformer (the whole system is called HPLL) is analyzed. A motivation for the study was that earlier researchers have found improved performance if Ilse lead-lag network is paralleled by a differentiator, result mg in the so called ERPIM (Extended-Range Phase-Locked Demodulator). For the purpose of com-parison with earlier experimental and analytical results on the PLL and the ERPLD, the numerical results in this thesis ale based on the parameters of Acampora and Newton.

The basic characteristics …

Fetal Phonocardiography, Jeng-Kwan Lin

Theses

A reliable non-invasive tracking of the fetal heart rate from the maternal abdominal surface could be of significant diagnostic importance in the monitoring of pregnancies, not only for fetal heart rate assessment, but also for the observation of congenital cardiac malformations and transient difficulties during labor. Further, the fetal heart rate recording may be used to assess fetal heart rate variability in the antepartum period of gestation when it is not possible to obtain a fetal scalp lead electrocardiogram.

There are several methods being used to detect the fetal heart rate. Phonocardiography, abdominal electrocardiography and ultrasound cardiography are the three …

Simulation Study Of The Multi-H Continuous Phase Modulation, Min-Ling Lin

Theses

Of particular interest in satellite communications are modulation techniques that have a relatively constant envelope and are power and bandwidth efficient. Attempts have been made to satisfy these requirements by using phase and frequency modulation formats. Recently, one approach has been researched which combines the modulation and encoding functions, which is referred to as multi-h continuous phase modulation. Simultaneously good power and bandwidth efficiencies can be achieved at the expense of increased complexity.

This report examines the performance of multi-h continuous phase modulation by a simulation. A multi-h phase coded modulation is generated, passed through the AWGN transmission channel. The …

Independent Equations Method For Power System State-Estimation, Shun-Gee Lin

Theses

The problem of power system state estimation (PSSE) is to convert the available. redundant and noise contaminated measurements, and other information into a best estimate of the state of the system.

Methods to solve the PSSE, including the sub-problems of bad data presence detection, identification and reconstruction, are reviewed. The Independent Equations Method (IEM) was selected for in-depth study and analysis.

The tree method for bad data identification is tested and failed due to the suspected ill-conditioning of the sensitivity matrix. For bad-data reconstruction, the IEM fails as described. Modifications that saves computing time and ensures reconstruction success are presented …

Gallium Arsenide Standard Cell Cad Database For Digital Design, Nanchou Liu

Theses

This thesis develops a selected design database of gallium arsenide logic cells for automated design. Uniformly applied 1 um gate length physical layout rules are used for the design database with a standard cell design methodology.

Schottky Diode FET Logic (SDFL) technology with double level metallization was selected following a consideration of alternative gallium arsenide MESFET logic types. The SDFL approach is judged to provide improved noise margin, production yield, density, and lower power dissipation.

A cell library with 60 um cell height has been implemented with double entry for each cell input/output. Each cel1 has been simulated with SPICE …

Contrast Sensitivity Measurement Via Evoked Potential, Ken-Gen Lu

Theses

This work is concerned with the use of the visual Evoked Response (VER) to determine Contrast Sensitivity in humans. For this purpose, a system has been developed where signals, obtained from scalp electrodes, and stimulated by visual grating patterns, are recorded digitized and processed on a personal computer (IBM compatible). Processing includes signal averaging and digital filtering. The system provides storage, retrieval and graphic representation of data as well as the capability to transfer data to other computer systems. Data processing includes parameter estimation of suitable signal models, which provide effective data compression of the signal into a finite set …

Asics Application On Voice Processing Interface Design- Qegg Multiplier, Gwo-Jen Luar

Theses

Application Specific Integrated Circuits (ASIC) is a high density VLSI design that including the lower cost, higher performance, small size, and increased reliability. The ASIC, XILINX's LCA is applied on the signal processing ahead of computer I/O interface, specially for the quantitative Electroglottograph. This thesis covers the logic design, simulation test, realization, and stand alone test.

Analysis Of Selected Pollutants In Complex Media, Suyi Luo

Theses

Part one: A rapid and reliable procedure is developed for the measurement of the carcinogen benzo(a)pyrene in food. It is a streamlined hybrid of two published methods. These involve ethanalic potassium hydroxide digestion of samples, isooctane extraction, column chromatography on florisil, separation of B(a)P by thin-layer chromatography and measurement of B(a)P by fluorimetry. The recovery of a B(a)P spike of sample is 86.0 + 14.5 % . The procedure which has a limited of detection of 0.05 ng/g (0.05ppb), has been applied to the Human Exposure to B(a)P study.

Part Two: Hexachlorocyclohexane, hexachlorobenzene and some selected PCB congeners were found …

Interface To 8052ah-Basic Microcontroller For A Multichannel Priority Interrupt System, Chen-Tung Mo

Theses

This thesis presents the design and development of a system with the capability to detect up to forty channels of signals generated from different analog sources and to process them under the control of a microcomputer.

The present work offers the design and implementation of a hardware interface unit in a multichannel real-time data acquisition system as well as the application software program to operate it. This kind of system can be widely used in process control, musical instrument interfacing, and machine automation.

This interface unit follows the general instrumentation architecture in both signal processing and logic control. The software …

A Dynamic Set-Based Multiaccess Protocol For Local Area Networks, Parul S. Nanavati

Theses

The packet-broadcasting technique brings together the advantages of both packet switching and broadcast communication. The central problem of a packet broadcast network is conflict resolution among the users sharing the broadcast communication link. Collisions are the major source of transmission errors which degrade the performance of a LAN. Proposed here is a novel multiaccess protocol which offers full communication resources to the user at low traffic requirements. It dynamically adjusts the number of users allowed to access the medium at heavy traffic requirements such that number of collisions are reduced and thus maintains the efficient utilization of the medium and …

Computer Aided Synthesis Of A Four-Bar Linkage To Generate A Symmetrical Coupler Curve, Shailendra R. Pachalag

Theses

The purpose of this study is to develop a new analytical technique for the synthesis of four-bar mechanisms to generate symmetrical curves with a coupler point passing through 8 points. The geometric expressions involved in kinematic synthesis often tend to offer difficulties such as negative radicals, alternative choices and repetitions. Here a solution procedure has been developed which avoids these difficulties. This solution procedure includes a development of a computer algorithm that should synthesize a crank-rocker type linkage for any given input crank length. This algorithm dismisses all solutions involving negative radicals and lists magnitudes of members so that those …

Design Criteria Of Coherent Optical Fiber Communication System, Rajesh N. Patel

Theses

Design criteria of coherent optical fiber communication system were discussed and investigated. First, the different types of optical fibers (waveguides) were discussed. Then the laser sources, photo-detectors, transmitter & receiver circuits were discussed in detail.

Design criteria of conventional intensity modulated (direct detection) optical fiber communication system were discussed. Then, the design criteria and estimation of number of photons for different modulation schemes for coherent optical fiber communication system were analyzed.

Coherent optical fiber communication system's advantages and drawbacks were discussed in detail. Improvement in receiver sensitivity of coherent detection compare with conventional direct detection was investigated. Finally, some receiver …

Microprocessor Testing And Computer Aided Diagnosability Of Digital Circuits, Shirish Patel

Theses

Computer Aided Diagnosability Of Circuits (CADOC), a new method is developed for isolating and pin-pointing a faulty device in digital circuits. CADOC is based on graph-theoretic principle and PFD numbers. Without considering any SA1 or SAO faults, we can zoom out faulty device by selecting different diagnostic path to narrow down the faulty region and to isolate the faulty device. The efficiency of this new technique is confirmed by applying the technique to many examples.

3-D Reconstruction Of Microvasculature From High Voltage Electron Microscopy (Hvem) Data, Pradip Kumar Paul

Theses

This is a new method for histoarchitectural and volumetric analyses of cell compartments of microvasculature with the use of a unique combination of computerized 3-D reconstruction and HVEM thick serial cross sections. The technology is potentially a reliable, simple, accurate and fast method. Pioneering work in this area was started by Todd et al. (Circ Res Vol :53 p 319 ;1983) basically using light microscopy, but supported by conventional ultrathin transmission electron microscopy. These techniques are important in that they promise to resolve controversies in terms of evaluating the occurance of hyperplasia and hypertrophy in small resistance vessels in various …

Reliability Evaluation Of Liquid Crystal Displays Under Accelerated Test Conditions, Ishatdev Singh Rathore

Theses

This thesis deals with the recent study of reliability of liquid crystal displays. This study determined the effects of high temperature on LCD reliability. To accomplish this, reliability life testing was done on different kinds of LCD samples under different operating conditions. The tests were carried out on the samples of two different vendors at two different temperatures. No humidity was added in any test.

Vendor No. 1

1. 120 units at 77° ± l° C.

2. 80 units at 85° ± 1° C.

Vendor No. 2

1. 60 hard and 60 soft glass units at 77° ± 1°C.

2. …

Design And Development Of An Infrared Ccd Camera, John Frederick Romanowich

Theses

An infrared CCD camera system was designed and developed for operating various sizes of Schottky-barrier IR-CCD image sensor chips. The camera has a digitally programmable frequency synthesizer for operating the 160 X 244, 320 X 244, and 256 X 256 image sensors developed at the David Sarnoff Research Center. The electronics of the camera are designed to provide the outputs required for operating a XYZ monitor, a standard TV monitor, or a computer workstation. At the core of the camera design is a RS-170 standard sync generator that supplies the waveforms for synchronizing the camera's circuitry to produce a composite …

Design And Construction Of A Thermoelectric Calorimeter To Measure Thermal Resistance Of Building Components, Ravindra Samtaney

Theses

The steady-state thermal resistance of a building wall is an important parameter in determining its thermal performance. In-situ measurement of thermal resistance is the only unambiguous way of determining thermal resistance since the actual value may significantly differ from the laboratory or the calculated R-value.

Hitherto, the in-situ measurement of thermal resistance has been largely confined to the winter season. A thermoelectric calorimeter was designed, constructed and tested in order to provide measurements of thermal resistance during the summer as well as the winter season.

This thermoelectric calorimeter is a rectangular box, insulated on five sides and covered with an …

Study Of Dynamic Cmos Families And Development Of Certain Guidelines For Logic Synthesis, Vinay Santurkar

Theses

This work studies in detail two dynamic logic families, namely Zipper and Nora. It compares their performance using SPICE, a popular circuit simulator. Results show that a novel clocking scheme and a different latch circuit for the Nora pipelined structure can push its maximum clock rate of CMOS Dynamic circuits higher. It also ascertains whether the increased complexity of NORA is justified compared to the simpler Zipper circuit. It is shown that for very long logic chains, Nora works faster than Zipper. The work also presents some guidelines for synthesis of logic functions using CMOS Dynamic Cells. It shows that …

An Investigation Of Electrical And Physical Properties Of Reactively, Diode Sputtered Silicon Nitride Thin Films, Divyang Manharlal Shah

Theses

Silicon nitride thin films were deposited by r.f. reactive sputtering of silicon in nitrogen and argon discharge. Biased and unbiased modes of diode mode sputtering were used. Typical parameters for a sputter deposition run were: base pressure, 1-2x10-6 torr; sputtering pressure, 5-7 mtorr; nitrogen partial pressure, 15-16%; cathode-anode gap, 4 inch; r.f. power, 200-250 watts; cathode voltage, 1.8-2.1 V r.f.; water vapor pressure, 20-30% of the base pressure. The film thickness and the refractive index were measured by ellipsometery. The films of thickness 300-2500A, refractive index 1.9-2.1 and resistivity 10101Ω — cm were obtained. The deposition rate was in the …

Design Of An Experimental Apparatus To Measure The Charge And Mass Of Ionized Species In A Partially Ionized Cluster Beam Deposition System, Nitin K. Shah

Theses

The objective of this research was the design and construction of an experimental apparatus to investigate the size distribution of gallium clusters that can be emitted from a heated crucible with a 1 mm nozzle. This research work involved the design and construction of a partially ionized cluster beam (PICB) deposition system which would provide low charged particle background for retarding field analysis and cluster size measurements. The apparatus also allowed control of critical parameters on which the cluster size may depend.

The promise of PICB is based on the formation of clusters of adatoms, their ionization and their acceleration …

Integration Of Cad/Cam System Into A Waterjet Cutting Cell, Sanjay C. Shah

Theses

The work is intended to bridge the gap between CAD and CAM fora waterjet cutting cell. The output of CAD is used by CAM directly through the software interface developed. To achieve this, a postprocessor is designed for a two-dimensional system for the series 8200 Allen Bradley's 5-axes Robot Controller. Calma's DDM & DIMENSION III interactive graphics system implemented on VAX was used for the part design. The postprocessor is a computer program, written in the structured FORTRAN, that is unique for a given machine-tool/controller combination. The conversion of the coding and recording format of the APT file to the …

Seizure And Wear Testing Methodology, I-Tsung Shih

Theses

In this work the seizure as an adhesive wear has been discussed and analyzed The diffusion hypotheses is accepted as the seizure mechanism. It was determined that the surface of machine components, material properties, and contact stresses in sliding and loading zone are responsible for the wear.

A computer controlled wear testing methodology has been developed and a wear testing machine has been designed and assembled. The tests for the selected gray cast non and alloy steel specimens with different surface treatment were performed on the designed wear testing machine.

The test results showed that the selected materials with additional …

Preconcentration And Direct Flame Ionization Method For Measurement Of Non-Methane Organic Compounds In Ambient Air And Statistical Analysis Of Experimental Data, Lianyi Zuo

Theses

A fast and reliable method for the determination of non-methane organic compounds (NMOC) in ambient air has been developed. Samples are collected in SUMMA polished stainless steel canisters using a sampling system with a critical orifice as flowrate controller. Analysis of NMOC in the atmosphere via a canister is carried out by cryogenic preconcentration and a direct flame ionization detection method (PDFID). This system is sensitive and provides accurate measurement of ambient NMOC concentration even if the concentration is as low as 0.1 ppm carbon. The performance of the method was characterized using 19 pairs of canister samples and tested …

Detection And Determination Of N-Nitrosohexamethyleneimine In Benzenesulfonamide, N-[[(Hexahydro-1-H Azepin-1-Yl)Amino]-Carbonyl]-4 Methyl By Hptlc, Anulfo A. Valdez

Theses

A simple method, by High Performance Thin Layer Chromatography HPTLC), was developed for rapid determination of N-Nitrosohexamethyleneimine in Benzenesulfonamide, N-[((hexahydro-1 H Azepin-1-yl)amino]-Carbonyl]-4 methyl, (Tolazamide). Separation of N-Nitrosohe-xamethyleneimine from a Tolazamide solution in chloroform was obtained by precipitation of Tolazamide with n-heptane and by passing the resulting clear solution through a small silica column which was eluted with methanol.

Determination of the N-nitroso compound was achieved by ultraviolet irradiation of it on activated High Performance Silica Gel Plates. Detection was performed by spraying the plates with triethylamine and fluorescamine reagent giving a fluorescent product. Visual detection limits of 25 ppb were …

A New Hazardous Waste Treatment Technology Utilizing Low Power Density Microwave Energy, Gabriele Else Windgasse

Theses

Two major applications of a new hazardous waste treatment technology using low power density microwave energy have been characterized: 1) Desorption of organic materials such as: trichloro-ethylene, para-xylene, naphthalene and gasoline hydrocarbons from substrates such as: sand and granulated activated carbon was achieved by microwave induced steam distillation and the application of a new phenomenon: arcing between GAC particles when they are exposed to microwave radiation. All contaminants could be removed to 100% (non-detectable with GC and GC-MS). 2) Decomposition of organic contaminants such as: trichloro-ethylene and trichloro-ethane in arcing/heating GAC beds. A new fluidized bed reactor ("RDW-reactor", after Ray, …

Synthesis Of Strained Bridgehead Lactams, Quansing Tu

Theses

While 1-Azabicyclo(3,3,1)nonan-2-one was originally thought to be difficult to synthesize, two different methods (DCC and di-n-butyltin oxide) will produce it with high yield. DCC is a strong reagent for absorbing water; the di-n-butyltin oxide method uses a Dean-Stark to remove water and is very useful. Bredt's rule influences the synthesis and stability of the N-bridgehead bicyclic lactams, this is apparent in the lactam series in the behavior of the (2,2,2) compounds and the (3,2,1) compound which we tried unsuccessfully to synthesize.