Digital Commons Network^™

Recruiting Techniques To Detect Truth And Personality, Franklin Keith Howard

Theses

Organizations today increasingly rely upon new measures of detecting employee honesty. Such approachs including lie detectors, handwriting analysis, voice stress tests, have their supporters and detractors.

This thesis will specifically concentrate upon the phenomenon of lie detectors...its origin, application and evaluation.

This thesis covers reasons why employers use these techniques, controversial issues centered around their use, legal implications, and their outlook in the employment setting.

Modification Of A Heat Transfer Program (Stan5) To Account For Surface Roughness And Its Application To Aerodynamic Icing, Parthasarathy R. Iyengar

Theses

In order to be able to predict the local ice accretion rate or the icing profile on an airfoil, it is necessary that a suitable heat transfer coefficient model be availabIe. A computer program has been developed which is capable of predicting the local heat transfer coefficient for a typical two dimensional icing surface. Because of the charecteristics of an icing surface, an existing computer program (STAN5) has been modified to include the effects of the following surface roughness surface curvature and boundary layer transition.

The computer program for the heat transfer coefficient has then been used with an existing …

Coupled Flexural And Torsional Vibrations Of Beams, Sang Hwan Kim

Theses

This thesis deals with the vibration of a beam whose flexural and centroidal axis are not coincident. The elementary bending- twisting theory is employed to derive the equations of motion, in which the effects of rotary inertia are added to the bending displacements and the effects of warping are added to the twist. Bending translation is restricted to one direction so that one bending equation is used instead of two. The equations of motion are solved by using the boundary value problem. The exact natural frequencies are found from the frequency equation , which is obtained from the condition that …

Deposition Of Particles In Cylindrical Chamber Due To The Effect Of Image, Inertia, Viscous And Gravity Forces, Mehul J. Shah

Theses

This study investigated the behaviour of charged particles in cylindrical chambers under the influence of image, inertia, viscous and gravitational forces. The flow was considered to be laminar, steady state and incompressible. The velocity profiles considered were uniform and parabolic with symmetry about the axis of the cylinder.

The governing equations derived were based on Newton's second law of motion. The equations for the case neglecting gravity are linear second order equations and the Runge-Kutta method was used to find a numerical solution. The data hence obtained is fitted to equations using curve fitting method. These equations and graphical techniques …

Plate Buckling Under Biaxial Patch Loading, Herli Surjanhata

Theses

This thesis is concerned with the buckling of rectangular plate-shaped elements under biaxial compressive loading with patch loading along one pair of opposite edges. The loading along the other edges is continuous but the discontinuous loading covers different patches along opposite edges. All the applied loads are uniformly distributed. The critical buckling load of this type of plate element is an important factor in the optimal design of many types of thin-walled structures. Frequently the nature of the problem prohibits an exact or even a general form of solution, thus dictating a numerical approach.

The problem has been attacked to …

Flow In A Channel With An Abrupt Change In Area : Finite Element Method, Ching-Fu Yu

Theses

Steady flow with an incompressible non-viscous fluid in a two-dimensional channel with an abrupt change in the width of its flow passage has been studied with a finite element method and a complex potential method.

The flow problem was solved with the use of an existing finite element program, FLOW2, in terms of the velocity potential and the stream function. The general procedure of solving problem by finite element method and the user's guide of FLOW2 program are presented in this thesis.

A computer program, EXACT, has been written for the exact solution based on the complex potential method to …

Behavior Of Thin-Walled Channel Shaped Reinforced Concrete Columns Under Combined Biaxial Bending And Compression, Subash Yalamarthy

Theses

Next to rectangular, circular and L shapes, Channel section may be the most frequently encountered reinforced concrete columns since they can be used as box wall for elevators. Nevertheless, information about the load deformation behavior is not generally available to structural engineers. Most of the investigations have been emphasized on the ultimate strength of column sections under combined biaxial bending and axial compression and the resulting interaction surface. No attention is paid to load deformation behavior.

Current code provisions do not provide adequate guidelines for assessing the strength and ductility of biaxially-loaded reinforced concrete columns. Therefore, this investigation is aimed …

Behavior Of L-Shaped Reinforced Concrete Columns Under Combined Biaxial Bending And Compression, Amar Shah

Theses

Combined biaxial and axial compression for L-shaped reinforced concrete short columns is a common design Problem. Current code, provisions and the available design aids do not offer an insight into the determination of strength and ductility of biaxially loaded reinforced concrete column. An experimental and analytical investigation of the moment-deformation behavior of biaxially loaded L-shaped short columns were undertaken. Four 1/2 scaled specimens were tested till failure. Moment-curvature and load-deflection curves were developed from the experimental and the analytical results. The analytical results were obtained using a computer program developed by Hsu (1). From the investigation it is deduced that …

Behavior Of Tee-Shaped Reinforced Concrete Columns Subjected To Biaxial Bending And Axial Compression, Antoun Romanos Nader

Theses

The investigation deals with the effect of eccentric loading on the moment-curvature relationship of reinforced concrete tee columns.

The test program consisted of two series of tee-shaped reinforced concrete columns, loaded biaxially at constant angle from the principle axes. Their end conditions were assumed to be pinned-ended.

Loads, at constant rate, were gradually applied until failure. At each loading stage, measurements were made for the strains and deflections at the mid span section.

The experimental and theoretical results of the load- deformation and moment-curvature were compared and found that the analytical approach proposed by Hsu is applicable to irregular sections …

Performance Modeling And Simulation Of Multiple Microcomputer Systems, Moorthy Narayana Hariharan

Theses

Multiple processor systems are the logical choice for applications demanding high computing power, throughput and reliability. Moderately coupled Multiple Microprocessor systems can be applied to a variety of applications demanding high performance. The structure of Multiple Microprocessor systems is examined. Various interconnection structures are analysed for performance comparisons.

Queueing theory is a powerful tool in modeling and analysing Computer systems. Queueing models are developed for popular Multiple processor interconnection topolog es like the Shared memory, Shared bus, Star and Loop configurations.

The usefulness of Digital computer Simulation techniques in estimating the performance of Multiple processor systems is demonstrated through a …

Calibration Of Flame Ionization Detector For Chlorinated Hydrocarbons, Nahid Jabalameli

Theses

Relative Responses and Calibration Factors were developed for several volatile organic (mostly chlorinated) priority pollutant species in order to use one single stable compound (e.g.Benzene) for daily instrument calibration. This would replace the procedure of using a standard mixture of target compounds (25-35). This is of particular advantage because the standard mixture may not have all species stable or may show loss of some components relative to others due to wall adsorption in the standard (compressed gas) stainless steel cylinder.

The use of a single standard species was made possible by developing "accurate" relative response and calibration factors of all …

Volatile Organic Pollutant Levels In Indoor Environments From The Use Of Kerosene Heaters, Kashinath Banerjee

Theses

The indoor air pollutant levels caused by use of kerosene stoves as sources of heat in residences is of increasing concern as the use of such heaters becomes more widespread. Emission of volatile organic. species (aliphatic hydrocarbons from hexane to dodecane, cyclohexane and aromatic species including benzene, toluene, ethyl benzene, m/p xylenes, o-xylene and styrene) from these devices were measured at different sites. The organic vapor samples have been collected by adsorption on Tenax GC, and quantitatively analyzed by thermal desorption into a high Resolution capillary column gas chromatograph. Mass spectral analysis was also conducted for qualitative identification of sample …

The Application Of The Finite Element Method To Plate Stress Analysis, Yao-Zong Jen

Theses

The finite element formulation of plane elasticity and plate bending is presented and is employed in the development of the formulation of element stiffness equations and structural stiffness equations. The basic relations used to derive the finite element equations for a solid continuum are also presented. The programming organization is summarized.

The computer program cited from TAYLOR has been used to solve the deep beam problem with triangular and rectangular elements and the SAP IV program has been used to solve the plate bending problems with quadrilateral elements. Problems solved are: (1) stress distribution at the midspan of a simply …

Synthesis Of Cyclobutenyl Ketals, Atef Z. Boulos

Theses

A series of dialkoxy derivatives of N,N'-di-tert-butyl-2-butylamino-3,3-dichloro-4-dichloromethylene cyclobutenyl carboxamidinum chloride, were prepared by dissolving either Na+ or K+ alkoxide in the appropriate alcohol, or by treatment with potassium hydroxide in the appropriate alcohols. Thus, the dimethoxy, diethoxy, di-isopropoxy, di-n-butoxy, di-tertbutoxy derivatives were obtained.

Quantitative Evaluation Of Substituent Effects On Stabilization Energies Of Strained And Unsaturated Molecules, Tyler Arthur Stevenson

Theses

Thermodynamic stabilization energies are presented for a series of monosubstituted vinyl, cyclopropyl, ethynyl, and phenyl compounds. The energies are calculated using ab initio molecular orbital calculations at the 4-31G level, and also with published experimental heat of formation data. Correlation analyses are then attempted with the dual substituent parameter approach with the stabilization energies. The analyses are also attempted with a triple-parameter approach using Topsom's theoretically calculated X, F, and Ro constants. Among the findings are the facts that π-donating substituents correlate well, while π-accepting substituents do not. Indications of the relative sensitivities of hydrocarbon frameworks to substituent electrostatic and …

Analysis Of Deflection Temperature Under Load, Anand M. Jagani

Theses

Deflection Temperature Under Load (DTUL) is an experimental value commonly used by designers to characterize a plastic in a high temperature environment. This value is currently measured by a standard test procedure specified by the ASTM D-648. A theoretical analysis of this test was made and computer programs were developed to calculate the Deflection Temperaure of Plastics Under Load based upon temperature dependent flexural modulus data and temperature dependent thermal properties of the plastics of interest. The results obtained from the theoretical analysis agree closely with the experimental values found in the literature for two resins. An analysis of the …

An Inquiry Into Engineering Career Choice And Career Satisfaction, Gunars Bachs

Theses

The purpose of this thesis was to ascertain factors that motivate a person to study engineering, and to examine the aspects of engineering career satisfaction. This study was conducted as a survey by means of a mail questionnaire, which was distributed among graduates of New Jersey Institute of Technology. Another sample, comprised of master's degree recipients of NJIT who had received their bachelor's degree from other undergraduate schools, served as a control group.

Motivation factors and positive and negative aspects of the engineering career were established and ranked in order of their importance. A method to measure career satisfaction was …

Decentralized Optimal Control With Application To Dynamic Routing In Computer Communication Networks, Ning Wang

Dissertations

This research considers the dynamic routing problem of computer communication networks in the framework of decentralized control theory. The routing dynamics are modeled in terms of a state equation with multiple controllers. Routing, or control of message flow, is formulated as an optimal control problem with multiple decision makers. Each decision maker may have access to different set of information and work cooperatively to optimize a common system performance index.

Necessary and sufficient conditions for optimality are derived for a system with a deterministic and a stochastic traffic patterns under a linear information structure and a quadratic performance index. The …

Mathematical Models Of Unsteady Operation Of A Packed Column, Jen-Fu Chao

Dissertations

Analytical solutions of differential equations applicable to extraction, ion exchange, or adsorption processes in packed beds are presented. Results are given for three different cases. The first case accounts for adsorption phenomena only. The second one includes surface adsorption on particles and the effects of longitudinal dispersion in the bed. The third one deals with diffusion in particles and longitudinal dispersion in the bed. In the mathematical modelling of these three cases, a linear equilibrium relationship between the solute in the liquid phase and solute in the solid phase is used. The first case is solved using the single boundary …

Design Of A Photoreactor For The Oxidation Of Toxic Pollutants In Water By Ozone And Ultraviolet Radiation, Shahab Rashid Khan

Theses

A photoreactor has been designed to oxidize refractory chemicals found in water using ozone and ultraviolet radiation. The feasibility of the ozone/UV process has been examined by conducting experiments with three model compounds, namely, (1) o-chlorophenol (2) m-chlorophenol and (3) p-chloro phenol. For o-chlorophenol and p-chloro-phenol, reactions were very fast with ozone/UV oxidation and somewhat slower with m-chlorophenol. It is concluded that UV irradiation increases the decomposition of ozone and the resulting unstable intermediates are much more reactive than ozone. Ultraviolet light also helps in decomposing the substrate molecules. The effect of UV upon decomposition of ozone is more pronounced …

An Interactive Procedure For Numerical Design Optimization, Jaehwan Lee

Theses

An interactive version of the numerical design optimization method of Pappas for the solution of nonlinear optimization problems is presented in this thesis, A designer intervention strategy is employed herein for interactive optimization to allow the designer to control and manage the optimization process. This procedure embodied in the interactive CADOP6 program is tested on the ten bench mark problems of Eason and Fenton to illustrate the designer intervented optimization process and to provide a comparison with the fully automated procedure of Pappas This designer intervented interactive program appears more effective and faster than the completely automated CADOP5 code on …

Spectral Analysis Of Brainstem Auditory Evoked Responses, Amir Hossein Massumkhani

Theses

In this study, the power spectrum density of the brainstem auditory evoked responses is estimated by the method of periodogram. Several techniques for reducing the leakage due to the finite length of data, smoothing the spectrum and reducing the ambiguity in the spectrum due to the resolution are studied. It is shown that a Hamming window reduces the leakage considerably and zero extention of the data to 512 points produces sufficient spectrum bandwidth. Three major peaks are observed at 100, 500, and 1000 Hz which are stable for different evoked responses. In one case with a delayed wave V, the …

Measurement Of Thermal Conductivity Of Polymers Using Line Source Method, Manojkumar C. Patel

Theses

The purpose of this investigation was to evaluate the Line Source technique to measure the thermal conductivity of different molten polymers. Although the results obtained using this method are within acceptable experimental error limits, due to tec reasons explained, the results are not as accurate as claimed in the literature which describe this technique.

Mathematical Model Of Temperature Profiles And Coking In A Crude Oil Heater Tube, Joseph C. Polimeni

Theses

A mathematical model to predict temperature profiles and coking of crude oil in furnace tubes is presented. The model assumes that the coking mechanism is due to a reaction in the laminar sublayer, whose rate depends upon the temperature profile. That profile is obtained by a numerical solution of the appropriate transport equations, with velocity profiles that may be laminar or turbulent, and including the temperature dependence of the crude oil properties. In addition, velocity and temperature profiles were adjusted when necessary to ensure closure of the heat and material balances. As a by-product of this study, a correction was …

The Quasisteady Approach For Thermal Analysis Of Frost Action Below Refrigerated Warehouses, Milan Kumar Bag

Theses

The quasisteady method of analysis has been used to determine the frost depth below refrigerated warehouses. For the case when the ground temperature is different from phase change temperature, the solution is obtained by numerical integration of the equation governing the phase change process. When the ground temperature approaches the phase change temperature closed form solution is obtained. The results obtained from the quasisteady method compare well with the experimental results. The results presented in this thesis should find use in the design of the refrigerated warehouses in the colder regions of the world.

Lifo Perishable Inventory (S,S,T) Model And Its Related Discount Policy, Yuan-Shyi Chiu

Theses

The objective of this thesis is to determine the optimal (s,S,T) ordering policy for a perishable inventory system with a fixed product lifetime and Poisson demand. The simulation technique is utilized to identify the optimal ordering policy which minimizes the total cost consisted of ordering, holding, shortage, and outdate costs. Upon the establishment of the optimal ordering policy, a discount policy on the outdating items is proposed to provide decision maker(s) with tradeoff between the profit and the average outdate cost.

The computer programs written in FORTRAN are designed to generate the optimal (s,S,T) ordering policy of any above-mentioned inventory …

Data Acquisition And Parameter Identification In Electro-Oculography, Wolfgang Poelzleitner

Theses

Electro-Oculography (EOG) is used in clinical ophthalmology to measure the time response of the corneoretinal potential (CRP) to changes in light intensity. An automatized data acquisition and system modeling link has been developed that significantly reduces processing time presently required for EOG. The data acquisition is performed on a microprocessor based instrument, which supervises the EOG-test, measures the potential and, after completion of the test, transfers the results to a mainframe computer. Parameter identification routines provide graphical representation and mathematical models for the CRP. Both nonlinear curve fitting methods and Least Squares System Identification schemes are used.

Optimization Of A New Linear Fm Detector Using Digital Signal Processing Techniques, Edward J.A. Kratt

Dissertations

This dissertation describes and synthesizes a new member of the family of FM detectors introduced earlier by Klapper and Kratt. A salient property of these detectors is low delay with excellent sensitivity. The emphasis in the new detector is on the ease of digital implementation. In addition, the new detector is also extremely linear. In congruence with the other Klapper-Kratt detectors, it makes use of zero group delay elements, balance at RF, quasi-synchronous detection and carrier cancellation. The Performance of the detector is mathematically analyzed under the conditions of a modulated input wave, sinewave [sic] interference, and noise. The results …

The Effect Of Ultrasound On The Hydrolysis Of Carbohydrates, Adel A. Khamis

Dissertations

Acid hydrolysis of dextran and cellulose were studied with and without irradiation with ultrasonic waves of different frequencies (17 - 150 KHz), and powers (0.4 - 200 w/cm²). In the case of both materials, the hydrolysis reaction was found to be first order with respect to the activity of hydrogen ions in the reaction medium. Weight average molecular weight was evaluated at different durations of the reaction course. The reaction rate of dextran was found to be proportional to the weight average molecular weight raised to the power 4/3, and raised to the power 4 for cellulose.

The …

Application Of Fuzzy Theory To Pattern Recognition, David Usechak

Dissertations

Piecewise curve approximation is used to describe boundaries of objects in pictures and waveforms. The method consists of linear and quadratic piecewise polynomial approximations in which the error must not exceed a predetermined cost threshold. A fuzzy Bayes model is used to determine if a breakpoint exists within an interval I_n or between intervals I_n and I_n+1 and to determine whether these intervals can be merged for data compaction reasons. In order to achieve these objectives a new fast algorithm has been proposed which gives good curve/object fitting. This algorithm uses a technique for generating generalized inverse …