Digital Commons Network^™

A Closed Form Image Force Function For Deposition Of Particles In A Cylindrical Tube, Hsi-Chung Chiou

Theses

This study investigated the behavior of charged particles suspended in a laminar steady incompressible flow in a cylindrical tube under the influences of image , inertia , viscous and gravitational forces. A new expression for the image force was obtained by introducing an approximate potential energy function. The velocity profiles employed in the analysis were uniform and parabolic.

The governing equations derived were based on Newton's second law of motion and were solved by a Runge-Kutta numerical method. The results were obtained for different values of Q, a dimensionless inertia-charge parameter. For a value of Q equal to zero the …

The Stress Distribution Of The Frp Pressure Vessel By Using Ansys Program, Lung-John Tsai

Theses

The objective of this paper is to take advantage of a general purpose finite element computer program, called ANSYS, to analyze the surface stress distribution of a fiber reinforced plastic (FRP) laminated composite pressure vessel. The vessel is subjected to internal pressure, which is assumed to be constant over the interior surfaces.

In this paper, the material is assumed to be orthotropic, and the stress-strain relationship linear.

A FRP pressure vessel subjected to an Internal pressure, 6.895 MPa (1000 psi), is taken as an example. The results show that this approach compares well with a theoretical solution.

Characterization Of Microorganisims After Feeding With Phenolic Compounds : Comparing A Domestic Sludge To An Industrial Sludge, Dianne Adamowitz

Theses

This study examined the effects of phenolic compounds on the populations in mixed liquors obtained from two very different treatment plants: the Passaic Valley Sewerage Commissioners plant in Newark, and the Livingston, NJ municipal treatment plant. The dominant organisms were identified initially and after ten days exposure to phenol (100 ppm), and either 2-chlorophenol (20 ppm) or 2,6-dichlorophenol (10 ppm) in aerated batch reactors.

Results confirmed the remarkable similarity between the two mixed liquor populations, in spite of the significant differences in the operation of the two treatment plants.

Modelling Of Pile Load Tests In Weak Rock, Daniel Walter Caruso

Theses

The purpose of this thesis was to investigate the loss of load capacity of relaxed pile groups driven into weak bedrock. This was accomplished in the laboratory using a dynamic driving apparatus equipped with a static load testing system. The static load testing system applied loads hydraulically, and the load settlement behavior was monitored using an electronic load cell and a linear variable differential transducer (LVDT).

Tests were performed using 1" diameter steel pipe piles driven in a five pile group pattern at spacings of two diameters and four diameters. Piles were driven into a simulated rock mass consisting of …

Pressure Drop In A Strainer Element By The Finite Element Method, Wei-Long Chen

Theses

The pressure drop in a strainer element which consists of a channel and a diffuser has been investigated by the finite element method and the semi-empirical analysis.

An existing finite element program, FEM2D using the penalty parameter model, was employed. It was found that the range of Reynolds numbers in the strainer element was 0.193 to 4.824. For the pressure drop in the channel, the finite element method is in agreement with the analytical solution. For flow in the diffuser, the finite element method failed to give satisfactory results due to flow separation.

The Conversion Of The Process Flowsheet Simulator, Flowtran, For Fortran 66 Based Mainframe Computers, Timothy Edward Roche

Theses

The process flowsheet simulator FLOWTRAN was converted from FORTRAN 77 code to FORTRAN 66 code. The conversion was accomplished by developing a number of subprograms to handle FORTRAN 77 intrinsic functions that are missing in the FORTRAN 66 standard and by altering the code to take advantage of the developed subprograms. Also developed were a set of procedure files for executing the FORTRAN 66 FLOWTRAN on a Sperry-Univac 90/80-4. The new FLOWTRAN was tested and performs identically to the FORTRAN 77 version. The FORTRAN 66 FLOWTRAN can be installed on any mainframe computer with a FORTRAN 66 compiler.

Implementation Of Finite Element Method On A Microcomputer, Chi-Yuang Huang

Theses

A finite-element program FEM2D has been implemented on a PHILIPS microcomputer. The program has a generation preprocessor and thus makes finite-element analysis on a microcomputer considerably easier than before, since it allows models to be created and edited much faster than by manual method. The interactive program FEM2D prompts the user to input data directly from the screen. It is convenient for the user, both in teaching and learning.

The FEM2D is a two-dimensional finite-element program capable of solving two-dimensional problems, such as plane elasticity, heat transfer and imcompressible fluid flow problems. It is developed with a formulation of a …

Deposition Of Suspensions In Convergent Channels Due To Electrostatic Image Forces, Kwok Wah Hui

Dissertations

The deposition of suspensions for uniform flow in convergent channels under the combined influences of inertia, viscous and electrostatic image forces was studied theorectically. The fluid phase was assumed to be two-dimensional, steady, uniform, incompressible and laminar while the particle phase was assumed to be uniform, steady, dilute and with negligible gravity effects.

Since the image force equations for convergent channels have not been derived, it becomes one of the main purposes of this study to perform the derivation of the image force equations. The lengths of the channels were chosen in a way that the exit area is only …

Deposition Of Particles In Tubes Due To Gravity And Electrostatic Charges, Win-Chung Chen

Dissertations

The deposition of particles in a parallel-plate channel and a circular tube under the influence of inertia, fluid viscosity, gravity and electrostatic image forces was studied by analytical and numerical methods. A laminar flow with uniform and parabolic velocity profiles was investigated with a particle initial velocity of zero as well as that of the local fluid velocity.

The governing equations were solved by the Lagrangian approach to obtain the particle trajectories from which the fraction of deposition was calculated. Closed form solutions for particle trajectory and a complete deposition of particles in a finite length of the flow passage …

Computer Aided Stress Analysis Of Long Bones Utilizing Computed Tomography, Shlomo Asher Marom

Dissertations

A computer aided analysis method, utilizing computed tomography (CT) has been developed, which together with a finite element program determines the stress-displacement pattern in a long bone section. The CT data file provides the geometry, the density and the material properties for the generated finite element model.

A three-dimensional finite element model of a tibial shaft is automatically generated from the CT file by a pre-processing procedure for a finite element program. The developed pre-processor includes an edge detection algorithm which determines the boundaries of the reconstructed cross-sectional images of the scanned bone. A mesh generation procedure then automatically generates …

Two And Three-Dimensional Isoparametric Finite Elements For Axisymmetric Micropolar Elasticity, Fuang-Yuan Huang

Dissertations

Finite element analysis program for isotropic and orthotropic axisymmetric micropolar (Cosserat) elastic solids are developed in this thesis. Isoparametric elements of 8- and 20- node are used to solve general three-dimensional problems, arid both 4- and 8-node elements are used for two-dimensional cases. Three-dimensional finite element formulation for cylindrical coordinate system is derived. Corresponding Fortran programs are then developed. Patch tests are performed for two-dimensional cases to verify the applicability of the finite element method to non-rectangular geometries. Several two-dimensional and three- dimensional problems for micropolar elastic solids are solved to verify the formulations arid computer program.

Good agreements were …

Computer Application Of Project Planning And Scheduling With Cpm, Mohamed Tarek Abdel-Aziz

Theses

Scheduling is one of the most important tools for project management and control, and the CPM is one of the techniques used in project scheduling.

The primary objective of this thesis is to develop a CPM computer package using a microcomputer. The package is constituted in Basic (Applesoft Basic) for use on Apple II Plus, IIe or IIc.

The package is intended to be available to users without sufficient knowledge about computer. And it consists of two computer programs. The first computer program is the CPM-I which schedules project activities with unlimited resources. The second computer program is the CPM-II …

Simulation Of A Microprocessor Controlled Drill Press, Arun J. Ayyagari

Theses

The concept of flexible manufacturing systems has ushered new dimensions into machine tool design. The power of this new technique is that a high degree of flexibility in a machine tool can be easily achieved by developing a software based control system as against conventional hard wired systems in existence.

To demonstrate this point, a microprocessor based control system is developed, in this thesis, to control the automated drill press. The Motorola MC6808 8-bit microprocessor is chosen as an example.

The microprocessor first evaluates the optimum cutting parameters for the given cutter size, work material and operation. It then uses …

Computational Method For Solving The Kinematics Of Mechanisms Using Matrix Methods, Rajat Pardal

Theses

This thesis deals with the computational methods for kinematics of mechanisms using matrix methods. The method is particularly suited to the complex mechanism problems for which hand calculations are difficult. The thesis first reviews the matrix methods on which the program IMP is based. A computer program developed by Ve Tung using the same theory is enhanced in this thesis. By using this revised program, comparison between the non-linear algebraic approach and the matrix methods developed in this thesis has been made by the help of suitable examples. Further, it has been proved that the Integrated Mechanisms Program does not …

Computerized Work Measurement System, Vrajesh Shah

Theses

This thesis is concerned with the application of computerized work measurement to improve productivity and efficiency of production workers. In doing so, the techniques of MOST (Maynard Operation Sequence Technique) is studied to determine its appropriateness for industrial use. The advantages and disadvantages of the system are studied as to its value to large and small industries.

Development Of Dynamic Analysis Program Mini-Dymac, Shang-Rou Shien

Theses

The computer program DYMAC developed by B. Paul automatically generates and numerically integrates the equations of motion of closed loop multi-body mechanical systems. The theory behind this program is Larange's form of d'Alembert's principle. However, it is not an easy task for the beginners to understand this program completely. If there is a simplified version of the program, it will be of great help for those people to understand the essential organization of the program.

Using the same theory of DYMAC, computer program MINI-DYMAC is developed in this thesis and hoped to serve as an educational version of DYMAC. For …

Graphic Display Of Robot Kinematics, Ramamurthy Vishwanathan

Theses

This thesis uses the HOUIE.BYLI graphics software package to simulate the kinematics of a six degree of freedom, MAKER I robot. The coordinate frames for the various links of the robot were established. The kinematic equations for the manipulator were developed snd solved using the techniques of inverse geometric transformations and transformations of objects in 3D space. A program was also developed to calculate the joint variables of the manipulator given any point on, and the orientation of, an object. These variable values are used to direct the robot end effector to the given point. This can be seen in …

Similitude Analysis Of Model Experiments Of Piles Driven To Rock, George Nicou Georghoudes

Theses

This thesis investigates the similitude requirements for the Dynamic Pile Driving Apparatus in the New Jersey Institute of Technology Laboratory. The apparatus is being used to perform model tests to study bearing stratum fracturing caused by driving pile groups to weak rock.

Two approaches were used to establish similitude between the model and actual field conditions. The first approach utilizes dimensional analysis to develop a relationship between the energy delivered to the rock mass by the pile and the unit length. The second approach proposes a procedure to establish an empirical relationship between the threshold energy to fracture the rock …

The Impact Of Fms On Batch Production Processes, Jan-Sheau Ho

Theses

A Flexible Manufacturing System (FMS) is an integrated system of combining metalcutting and other processes with materials handling under computer control. With computer control, FMS is capable of processing a variety of different types of workpieces simultaneously. FMS is an approach towards a balancing of high output on the one hand and great flexibility on the other hand. FMS stands as a new technology to improve the productivity of mid-volume, mid-variety production; therefore the manufacturing world will soon feel the impact of FMS.

This thesis attempts to specify what FMS is and how it works, the influence of FMS on …

Optimization Of Reactive Ionized Cluster Beam (R-Icb) Technique For Deposition Of Gan Films, Veronica S. Kyriacou

Theses

The deposition of GaN film onto glass substrate, using the Reactive - Ionized Cluster Beam deposition technique was studied. The creation of clusters is dictated by various parameters such as the vacuum pressure inside and outside the crucible, the crucible temperature, and the nozzle diameter of the crucible. Optimization of these parameters was experimentally studied, and deposition of gallium films on glass substrates was tried as a first step.

The direct heating method was used at first to get the 1100¬1300°C crucible temperature which was required for the creation of gallium clusters. Although different tungsten wire diameters and different number …

Optimum Design Of Structures Subject To Buckling Constraints, Thomas G. Looby

Theses

This thesis describes the optimal design of bar type planar truss structures subject to stress and buckling constraints. All of the structures considered are modeled using the direct stiffness finite element approach. A mathematical programming method incorporating a feasible directions routine is utilized to develop least weight designs for these conditions. The existing structural optimization programme CADOS which has successfully solved stress and deflection problems for this class of structures is adapted herein to treat local stability constraints based on Euler bucking criteria.In addition the optimization routine is modified to more effectively treat, infeasible starting designs. These modifications were tested …

Finite Element Analysis Of The Prosthetic Acetabular Region, Katkuri Venkat Rammanohar Reddy

Theses

Femoral component loosening and prosthetic stem fractures have renewed interest in conservative alternatives to conventional total hip replacements. The objective in this study is to get interfacial stresses of a acetabular surface replacement cup. This is done by performing finite element analysis of the model. A solid three - dimensional model with a grid of 3D isoparametric solid elements is generated using ANSYS, a powerful finite element analysis package. The stiffness is considered to be linearly proportional to the stress in the acetabular region. The stresses are determined by performing iterative finite element analysis. Stresses arp computed using two different …

Graduate Catalog 1986-1988 New Jersey Institute Of Technology: The Technological University Of New Jersey, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

New Jersey Institute Of Technology, Undergraduate Catalog, 1985-1987, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.

An Industrial Ethanol Azeotropic Distillation Process : Modeling, Analysis, And Simulation, Harpreet Singh Chawla

Dissertations

A steady state process simulator with extensive capabilities was developed for the simulation of process plants involving non-ideal multicomponent systems. A comprehensive stand alone program was developed to represent process systems encountering three phases. A computer program was also developed to handle simultaneous regression of vapor-liquid and liquid-liquid equilibria data to estimate the liquid phase activity coefficients via a global set of parameters for the ethanol azeotropic distillation process, using benzene as the entrainer.

An industrial ethanol azeotropic distillation process has been simulated using the developed process simulator (PROSIM). A study of the azeotropic column's aqueous ethanol feed composition reveals …

A Survey Of The Literature On Moisture In Building Construction, Lawrence Charles Tiboldo

Theses

The aim of this thesis was to evaluate the literature on moisture in buildings for its usefulness in the understanding of the theory involved in moisture transfer in buildings. Because analysis of the effects of moisture migration and development of condensation control strategies in structures depends on the knowledge of heat and moisture transfer theory as well as on the documented data on building material properties, evaluation of the usefulness of the reference material will serve as an indication of the availability of pertinent information.

To fulfill this objective, the literature listed as references to Chapter 21 of the 1985 …

Robot Manipulators And Control, Theresa Wu

Theses

This paper on Robot Manipulators brings together theories from three fields : computer graphics, kinematic equations and microprocessor based control.

There are four chapters in this paper, chapter one is the conceptual development on homogeneous transformations, express the position and orientation of the transposition of an object in Cartisian coordinates. Chapter two develops the method of obtaining the Cartisian coordinate position and orientation of the end effector for a manipulator, give the joint coordinate as input and use the homogeneous transformation to express the position and orientation. Chapter 3 is a very difficult one; it solves the parameters for the …

Spectrum Analysis And Real-Time Analysis Of Electroencephalograms, Suzanne Hesook Won

Theses

The analysis of the EEG background waveform is studied by two techniques, spectrum analysis and real-time analysis. The spectrum analysis is performed by using Fast Fourier Transformation (FFT) on a segment of the signal. The resulting signal is classified into different band types such as delta, theta, alpha and beta, to see the power in each band, and the magnitude of the power on the left and right side if the brain is evaluated for asymmetry. The mean power frequency shows the frequency where the maxinum power exists in each band type. This type of analysis provides overall information of …

An Investigation Of The Application Of Utility Theory To Determine The Value Of Time: The Demand For Interactive Information Systems In Student Markets, Gordon S. Kalley

Theses

The economic rational of many contemporary businesses is the provision of services or labor saving equipment which their customers' pay for in order• to save themselves time. A major decision such an enterprise must make prior to entry into the market i=_ whether enough of a market exists to make its entry worthwhile. Such firms would be able to make better resource allocation decisions if they could have a quantitative measure of the relationship of their consumer's valuation of time vis a vi money. This study proposes such a measure.

Interactive information systems, whose viability depends to a large degree …

Basic Concepts In Cad & Cam, Chao-Ming Liu

Theses

As the computer revolution is nearing its end, CAD/CAM concepts are being widely accepted and evolving rapidly. This thesis begins with a disscussion of the significance and advantages of CAD/CAM and their relationship with automation. Hardware and software components involved are then introduced. Product design under CAD is done by computers. Computers perform engineering analysis, necessary calculations, and dynamic simulation to complete the complex design. The geometric elements and operational primitives are provided by a data base system. The major components of CAM are then introduced. The term CAM is used in a broader sense to include CAPP, MRP, NC, …