Digital Commons Network^™

Adaptive Space-Time Processing For Digital Mobile Radio Communication Systems, Amit Shah

Dissertations

The performance of digital mobile radio communication systems is primarily limited by cochannel interference and multipath fading. Antenna arrays, with optimum combining (OC), have been shown to combat multipath fading of the desired signal and are capable of reducing the power of interfering signals at the receiver through spatial filtering. With OC, the signals received by several antenna elements are weighted and combined to maximize the output signal-to-interference-plus-noise ratio (SLNR). We derive new closed-form expressions for (1) the probability density function (PDF) of the SINR at the output of the optimum combiner, (2) the average probability of bit error rate …

An Investigation Of The Oxygraphic Response Of Stressed Bovine Blood, Cristin Mckenna

Dissertations

Oxygraphic profiles of stressed bovine blood in a temperature controlled 2 ml reactor vessel provide the basis for an investigation of blood's response to various conditions. This response is broken down into an initial response (within 3 seconds), the response over 1 hour and the response over 24 hours. Fast-assay runs which investigate the initial response display a dose-response relationship when chemically stressed by phenol. Phenol concentrations in the 1,000 ppm range indicate a decrease in dissolved oxygen (DO) and higher phenol concentrations of over 20,000 an increase in DO. In addition to phenol concentration, other factors investigated with respect …

Development Of A Mathematical Model Of Gait Dynamics, Tae Ho Choi

Dissertations

There exists hypothesis that gait selection is strongly correlated with mechanical energy efficiency in normal subjects. The hypothesis is experimentally proven, and intuitively taken for granted. However, it is not mathematically proven that the minimum energy consumption hypothesis is the underlying principle for the normal human gait. To prove the hypothesis we have developed a mathematical model of human walking, in which it is possible to predict an optimal gait at any given speed of walking based on the principle of minimum mechanical energy consumption.

This improved model, which includes the double-support phase of walking as well as the swing …

Particle Deposition From Turbulent Flow In A Divergent Channel, Wai-Ting Huang

Dissertations

This dissertation presents a numerical analysis of particle deposition from a dilute gas-solid two-phase suspension in a divergent channel. The Lagrangian governing equations for particle motion include inertia force, viscous force, gravity force and image force from electrostatic charge on the particle. The incompressible two-dimensional turbulent flow field in a divergent channel is solved by employing a Κ-ε modeling technique with FIDAP finite element CFD software. A computational procedure is developed to incorporate the flow field into numerical simulation of particle trajectories from which the fraction of deposition is determined. Several divergent channels (half divergent angles of 0°, 7.5°, 10° …

Scheduling In Assembly Type Job-Shops, Nutthapol Asadathorn

Dissertations

Assembly type job-shop scheduling is a generalization of the job-shop scheduling problem to include assembly operations. In the assembly type job-shops scheduling problem, there are n jobs which are to be processed on in workstations and each job has a due date. Each job visits one or more workstations in a predetermined route. The primary difference between this new problem and the classical job-shop problem is that two or more jobs can merge to foul' a new job at a specified workstation, that is job convergence is permitted. This feature cannot be modeled by existing job-shop techniques. In this dissertation, …

Multi-Wavelength Infrared Imaging Computer Systems And Applications, Jun Li

Dissertations

This dissertation presents the development of three computer systems for multi-wavelength thermal imaging.

Two computer systems were developed for the multi-wavelength imaging pyrometers (M-WIPs) that yield non-contact temperature measurements by remotely sensing the surface of objects with unknown wavelength-dependent emissivity. These M-WIP computer systems represent the state-of-art development in remote temperature measurement system based on the multi-wavelength approach. The dissertation research includes M-WIP computer system integration, software development, performance evaluation, and also applications in monitoring and control of temperature distribution of silicon wafers in a rapid thermal process system.

The two M-WIPs are capable of data acquisition, signal processing, system …

Modeling Of 3d Swept Volumes Using Sde/Sede Methods And Its Application To Five-Axis Nc Machining, Liping Wang

Dissertations

This research falls in two important areas in solid modeling and manufacturing automation: (1) swept-volume modeling; (2) computer-based NC (Numerically controled) machining simulation and verification. The swept volume is defined as the volume swept by an object undergoing an arbitrary motion. Modeling of 3D swept volumes includes the boundary computation and representation of a swept volume generated by a general object undergoing general motion in three dimensional space. The Sweep Differential Equation (SDE) and Sweep Envelope Differential Equation (SEDE) methods are two of the important swept volume modeling methods employed in this dissertation. They exploit differential equations to obtain the …

High Speed Protocols For Dual Bus And Dual Ring Network Architectures, Yaling Zhou

Dissertations

In this dissertation, two channel access mechanisms providing fair and bandwidth efficient transmission on dual bus and dual ring networks with high bandwidth-latency product are proposed. In addition, two effective priority mechanisms are introduced to meet the throughput and delay requirements of the diverse arrays of applications that future high speed networks must support.

For dual bus architectures, the Buffer Insertion Bandwidth Balancing (BI_BWB) mechanism and the Preemptive priority Bandwidth Balancing (P_BI_BWB) mechanism are proposed. BI_BWB can significantly improve the delay performance of remote stations. It achieves that by providing each station with a shift register into which the station …

Sampling And Analysis Of Trace Level Volatile Organic Compounds From Air Via Membrane Permeation, Naihong Zhu

Dissertations

The objective of this study is to develop air sampling techniques using membrane permeation. Two novel techniques for sampling and analysis of trace level VOCs from air via membrane permeation are presented:

1. selective concentration of VOCs into a canister using a membrane permeator;
2. on-line membrane extraction for direct introduction of VOCs from air emissions into a gas chromatograph.

In the membrane permeator-canister sampling system (MPCS), the air sample containing trace level VOCs as well as some interferences such as moisture are passed through the membrane module. Polydimethyl siloxane membrane used in this research is highly permeable to organic compounds, but …

The Nucleus: Transitions 1997, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the New Jersey Institute of Technology Nucleus.

On Document Filing Based Upon Predicates, Zhijian Zhu

Dissertations

This dissertation presents a formal approach to modeling documents in a personal office environment, proposes a heterogeneous algebraic query language to manipulating objects (folders) in the document model, and investigates a predicate-driven document filing system for automatically filing documents.

The document model was initially proposed in [38] which adopts a very natural view for describing the office documents using the relational and object-oriented paradigms. The model employs a dual approach to classifying and categorizing office documents by defining both a document type hierarchy and a folder organization. This dissertation extends and specifies formally the document model. Documents are partitioned into …

Membrane-Based Reactors For Ozonolysis Of Organic Pollutants In Aqueous And Gaseous Streams, Purushottam V. Shanbhag

Dissertations

Many gaseous and aqueous waste streams contain multiple organic pollutants at low concentration levels. It is not economical to recover and reuse these compounds; it would be advantageous to destroy them efficiently within the waste stream. This work employed ozone, a powerful oxidizing agent, in concert with a compact membrane-based phase-contacting device. Three types of membrane devices were studied: two of them (the single-phase membrane ozonator and the two-phase membrane ozonator) treated organic pollutants in wastewater, while the third (the integrated absorption-oxidation membrane ozonator) removed volatile organic compounds (VOCs) from a gaseous waste stream.

In the single-phase membrane ozonator, the …

The Fatigue Problems Of Cracks Subjected To Obliquely Incident Stress Waves, I-Chung Weng

Dissertations

Catastrophic failure of aircraft and other structures are often caused by undetected cracks. Fracture mechanics has been developed to augment traditional static and fatigue design. In the static theory of fracture mechanics, extensive treatment has been given to the stress distribution around sharp cracks and notches under various loading conditions. Previous works on the problems of dynamic loadings are not accurate in dealing with singularities at high frequencies. The numerical solutions become unrealistic at high frequencies in many practical applications.

To address the need to obtain the stress intensity factor in high frequency dynamic loading situations, we studied the use …

Analysis Of 320x240 Uncooled Microbolometer Focal Plane Array And Design Of Thermoelectric Cooler Controller, Takayoshi Fukaya

Theses

Uncooled microbolometer focal plane array is one of the promising method used in uncooled infrared imaging projects. The array's advantages over the conventional cooled imagers are its ability to operate without cryogenic cooler or dewar and its low cost. For the past several years, the ULTRA (Uncooled, Low cost, Technology Reinvestment Alliance) Consortium has been developing uncooled microbolometer imaging system.

This thesis investigates the technology behind the ULTRA camera system. The theoretical as well as the operation of the uncooled microbolometer focal plane array and the processing hardware and software is analyzed and explained.

Thermoelectric cooler controller for the microbolometer …

Development Of Methods For Field Determination Of Chromium (Vi) In Water And Groundwater, David John Chesbro

Theses

In this study, methods for the determination of chromium (VI) in fresh water at low ppb levels for the use under field conditions were developed. The plan was to devise a simple and inexpensive on-site field method which would be useable by people who are not professional chemists. An investigation was carried out to develop a preconcentration and determination procedure for the analysis of chromium (VI) using anion-exchange membranes and/or resins. The chromium (VI) would be sorbed to the solid support and then treated with 1 ,5-diphenylcarabzide, a specific colorimetric reagent for chromium (VI), which forms a red complex upon …

A Graphical Environment For Change Detection In Structured Documents, Girish A. Patel

Theses

Change detection in structured documents (e.g. SGML is important in data warehousing, digital libraries and Internet databases. This thesis presents a graphical environment for detecting changes in the structured documents. We represent. each document by alp ordered labeled tree based on the underlying markup language. We then compare two documents by invoking previously developed algorithms for approximate pattern matching and pattern discovery in trees. Several operators are developed to support. the comparison of the documents; graphical devices are provided to facilitate the use of the operators. We believe the proposed tool is useful for not only document management, but also …

Renin-Angiotensin System And Its Relationship To Arterial Pressure Regulation, Sami D. Saume

Theses

The renal system is known to participate in the natural regulation of blood pressure. A renal system model that simulates interaction responses of renal output to arterial blood pressure was developed. The major components of this model are glomerular filtration rate, tubular sodium reabsorption, the renin-angiotensin system, Aldosterone secretion, and antidiuretic hormone secretion. The model's differential equations were coded using Vissim 1.2 student version. It was found that, the renal output increased as glomerular filtration rate, Aldosterone concentration, and blood pressure increased. Conversely, increasing antidiuretic hormone concentration lead to decreased renal output.

Additionally, Angiotensin II and Aldosterone concentrations increased as …

Object Oriented Partitioning For A Medical Vocabulary Based On Semantic Network, Mansnimar Singh

Theses

Computers have become ubiquitous and indispensable part of everyday life both for personal use and in the workplace. Medicine is one of the few domains that has not fully adopted computerization. One impediment to this emanates from a communication gap between the computer science professional and the medical professional. Besides, medical terminology is full of synonyms and medical professionals use them according to their personal preferences. This lack of common terminology has prevented sharing of knowledge and automating data processing, resulting in the healthcare information explosion.

Semantic network models have been developed to represent medical concepts and to provide a …

Parameters' Analysis Of 3d Random Stacking Palletization, Najeeb Syed

Theses

Palletization is a very important element of production, distribution and warehousing activities. The 3D random stacking palletization method is based on volume utilization instead of surface area optimization. Random stacking provides interlocking among the boxes and hence it improves the stability of the pallet load. Volumetric Pallet Utilization is normally the prime concern of any palletization process, with Work in Process and Palletization time being also important. This research uses data generated from a previous heuristic to establish mathematical relationships between the three mentioned performance indices and also three additional indirect variables, namely: Total Number of Sub Volumes, Partitioned Remaining …

Finite Element Analysis Of Skin Injuries By Water Jet Cutting, Syed Muhammad Arif

Theses

High pressure water jets are used in industry for cleaning and cutting purposes. These devices can generate pressure up to 400 MPa. As high pressure water jets become more widespread in industry, injuries will be seen with great frequency. Penetrating injuries by these devices can produce minimal external evidence of extensive soft tissue injury. To know the extent of injury, it is important to study the relationship between operating parameters of water jet and the skin layers. A computational analysis is carried out using finite element method to find the effects of water jet pressure on the skin layer. Finite …

Analysis And Modeling Of Ultrasound Enhanced Soil Washing Process, Kamalavathany Rajaratnam

Theses

In this research, statistical analysis of data from ultrasound enhanced soil washing process was performed. The process was optimized using a statistical model. The model had four factors namely power, solvent:soil, surfactant, and dwell time as process variables. The percentage of removal efficiency was considered as the dependent variable. The results from two full and one partial factorial designs were analysed. Interactions up to third order were considered in the analysis, but the results from full factorial design showed that those of order higher than second had insignificant contributions to the removal of contaminants. Since the higher order interactions of …

Design And Implementation Of On-Line Metrics, Ashok Vantipalli

Theses

The performance of a software product plays an important role in the software industry to survive the tough competition given by the other software vendors. The real test for a software product starts after its release when it is extensively used by the end users and in different environments. And the software goes through a number of tests by the end users which can be very different and insufficient from the regression tests the software vendor performed on it. This critical issue; requires each vendor to have a department mainly dealing with the testing and analysing the performance of a …

Computer Simulation Of Cerebrovascular Circulation : Assessment Of Intracranial Hemodynamics During Induction Of Anesthesia, Steven D. Wolk

Theses

The purpose of this project was to develop a computer model of cerebrovascular hemodynamics interacting with a pharmacokinetic drug model to examine the effects of various stimuli during anesthesia on cerebral blood flow and intracranial pressure.

The mathematical model of intracranial hemodynamics is a seven compartment constant volume system. A series of resistances relate blood and cerebrospinal fluid fluxes to pressure gradients between compartments. Arterial, venous, and tissue compliance are also included. Autoregulation is modeled by transmural pressure dependent arterial-arteriolar resistance. The effect of a drug (thiopental) on cerebrovascular circulation was simulated by a variable arteriolar-capillary resistance. Thiopental concentration, in …

Assessment Of Potential Operating Benefits Incurred By Implementing Iso 14001 : Five Case Studies From The New Jersey Chemical Industry, Stefanie Gitter

Theses

Environmental management is an important aspect of strategic planning and competitiveness for many businesses. Environmental management systems (EMS) are operating policies that are established to help a company measure progress towards goals set forth in a strategic environmental plan. A growing number of EMS models are being used by countries and industry groups, so the International Standards Organization (ISO) developed one model to prevent duplicate efforts which can result when companies try to meet the import requirements of different countries.

The ISO-EMS model is a series of standards, and ISO 14001 is the first to be published. Companies will be …

An Investigation Into The Feasibility Of Utilizing Pneumatic Ultrasonic Devices Coupled With Pneumatic Fracturing In Enhancing Removal Of Volatile Organic Compounds From Soils, Hugo J. Fernandez

Theses

A bench scale investigation was conducted in a Plexiglass ™ Test cell 1 foot square by 2 feet in height, packed with 400 mesh sand to a density of 100 lb. /ft³. The sand was contaminated with a mixture of 10% ethanol and 90% water by weight having a total weight of 11.1 pounds, before it was packed in the test cell. A geotextile 1/2 inch thick was used as a simulated fracture and was placed 3 inches from the bottom of the tank. A siren and a whistle were tested in this fracture.

The data were divided …

Analysis Of Surface Texture Parameters And Cutting Forces In Milling Operations, Preetesh U. Munshi

Theses

It has been known and understood that milling is quite a complicated process being a multi-point cutting tool operation. Each Surface texture is complex and requires different functions of forces to get the optimized Surface Texture. The challenge faced here is to devise any form of relation between the Surface Texture and the Milling Operating parameters (Spindle Speed, Feed rate, Depth of Cut), Cutting forces and the Milling Operating parameters and also between the Surface Texture and the Cutting Forces.

This Research study was conducted to determine the effect of the Operating Parameters on Surface Texture and Cutting forces and …

Decontamination Of Aquifers Via Air Sparging/Biofiltration : An Experimental Study, Armando Mora Tellez

Theses

In this study experiments were performed in order to show feasibility of an integrated air sparging/biofiltration process for cleaning contaminated groundwater. Feasibility was also meant in the sense of meeting regulatory constraints. Using toluene as model compound and changing flowrates for the sparged air, it was shown that despite fluctuations in the toluene concentration at the inlet of the biofilter, the concentrations at the outlet of the unit were essentially constant over long periods of time and remained below the levels dictated by environmental regulations. However an increase in outlet concentrations at levels not meeting regulatory constraints was observed after …

Analytical Solutions Of Openings Formed By Intersection Of A Cylindrical Shell And An Oblique Nozzle Under Internal Pressure, Hengming Cai

Dissertations

Since several decades ago, many authors have published their research results about local stress distributions of shells and shell-nozzles both analytically and numerically. However, there has not been a published paper, which deals with analytical solutions of cylindrical shell and oblique nozzle, even though in the case of openings formed by intersection of a cylindrical shell and an oblique nozzle.

A comprehensive analytical study of local stress factors at the area of openings formed by intersection of a cylindrical shell and an oblique nozzle under internal pressure is presented in this dissertation.

By means of traditional approach in theory of …

Adaptive Distributed Detection With Applications To Cellular Cdma, Jian-Guo Chen

Dissertations

Chair and Varshney have derived an optimal rule for fusing decisions based on the Bayesian criterion. To implement the rule, probabilities of detection P_D and false alarm P_F for each detector must be known, which is not readily available in practice. This dissertation presents an adaptive fusion model which estimates the P_D and P_F adaptively by a simple counting process. Since reference signals are not given, the decision of a local detector is arbitrated by the fused decision of all the other local detectors. Adaptive algorithms for both equal probable and unequal probable sources, for independent …

Least Space-Time First Scheduling Algorithm : Scheduling Complex Tasks With Hard Deadline On Parallel Machines, Bo-Chao Cheng

Dissertations

Both time constraints and logical correctness are essential to real-time systems and failure to specify and observe a time constraint may result in disaster. Two orthogonal issues arise in the design and analysis of real-time systems: one is the specification of the system, and the semantic model describing the properties of real-time programs; the other is the scheduling and allocation of resources that may be shared by real-time program modules.

The problem of scheduling tasks with precedence and timing constraints onto a set of processors in a way that minimizes maximum tardiness is here considered. A new scheduling heuristic, Least …