Digital Commons Network^™

Reliability Of Resting Brain Networks Using Fmri, Suril Rajeshkumar Gohel

Theses

Resting state FMRI studies on human subjects are primarily focused on elaborating effects of resting state brain networks on task induced paradigm and to check consistency of these networks between different groups of populations. Recent studies have shown consistency of RSFC networks within same subjects with intra-site and intra-session variation.

The primary objective of this study was to check consistency of resting state networks between sites and between different groups of people in spite of change in scanning parameters and population. A total of 437 subjects resting state FMRI data from six different sites were collected varying in age group …

Electro Hydrodynamic Manipulation Of The Process Of Self-Assembly Of Particles At Fluid-Fluid Interfaces, Muhammad Mansoor Janjua

Dissertations

This dissertation is divided into two parts, first deals with the numerical study of motion of dielectric particles subjected to nonuniform electric fields and second deals with the process of self-assembly of particles at fluid-fluid interfaces and subjected to uniform electric field normal to the interface. In the numerical study, the particles are moved using a direct simulation scheme (DNS) in which the fundamental equations of motion of fluid and solid particles are solved without the use of models. The motion of particles is tracked using a distributed Lagrange multiplier method (DLM) and the electric force acting on the particles …

Optimizing Container Retrieval Operation At A Port Container Terminal, Dejan Besenski

Dissertations

In the presence of major challenges, where ports are striving to improve their operation and stay competitive in the global market, the issue of port efficiency, particularly the intelligent management of straddle carriers is investigated in this study. A new approach is presented that optimizes container handling equipment operation and is beneficial for the terminal operator in terms of improving productivity, providing faster service and reducing operating cost, Also, the solution provides acceptable service for truckers, The operational strategies presented are able to assess the operation from the truckers' and terminal operators' perspective.

The research is structured into four different …

Terahertz Response Of Microfluidic-Jetted Fabricated 3d Flexible Metamaterials, Yew Li Hor

Dissertations

Conventional materials exhibit some restrictions on their electromagnetic properties. Especially in terahertz region, for example, materials that exhibit magnetic response are far less common in nature than materials that exhibit electric response. However, materials can be designed, namely artificial man-made metamaterials that exhibit electromagnetic properties that are not found in natural materials by adjusting, for example, the dielectric, magnetic or structural parameters of the constituent elements.

This dissertation demonstrates the use of new fabrication techniques to construct metamaterials in THz range via a material deposition system. The metamaterials are fabricated by stacking alternative layers with conventional designs such as single …

Precipitation Of Micro/Nanoparticles In Enhanced High Energy Dissipation Mixing Systems, Giuseppe Di Benedetto

Dissertations

Crystallization is the most common unit operation used in the pharmaceutical industry to synthesize active ingredients. Rapid development of a drug candidate is dependent on the ability to produce a desired drug substance with consistent properties, These properties include stability and purity, which are directly affected by the crystallization process and which affect, in turn, bioavailability, drug dissolution rate, drug stability, and shelf life.

The objective of this work is to produce micro/nanoparticle crystals within existent glass-lined pharmaceutical stirred-tank reactors by modifying the current reactor configuration to include features that can increase the local rate of energy dissipation in the …

Phosphate And Thermal Stabilization Of Heavy Metals In Dredged Sediments, Peter Kuria Ndiba

Dissertations

Treatment and reuse of dredged harbor sediments in construction as an alternative to disposal reduces costs and conserves resources. This research focused on leachability of metal contaminants subsequent to phosphate addition and thermal treatment at 700 °C. X- ray absorption spectroscopy (XAS) in combination with principal component analysis, target transformation, and linear combination revealed that in the untreated sediments Zn precipitated as the relatively soluble smithsonite (ZnCO₃) (67%) and adsorbed to hydrous iron oxides (15%) and hydrous manganese oxides (18%). Phosphate addition and calcination resulted in sparingly soluble phases, hopeite (Zn₃₍PO₄)₂.4H_{2 …}

Collaborative Learning Utilizing A Domain-Based Shared Data Repository To Enhance Learning Outcomes, David J. Lubliner

Dissertations

A number of learning paradigms have postulated that knowledge formation is a dynamic process where learners actively construct a representation of concepts integrating information from multiple sources. Current teaching strategies utilize a compartmentalized approach where individual courses contain a small subset of the knowledge required for a discipline. The intent of this research is to provide a framework to integrate the components of a discipline into a cohesive whole and accelerate the integration of concepts enhancing the learning process. The components utilized to accomplish these goals include two new knowledge integration models; a Knowledge Weighting Model (KWM) and the Aggregate-Integrate-Master …

Kinematic Synthesis Of Planar Four Bar And Geared Five Bar Mechanisms With Structural Constraints, Yahia Mohammad Al-Smadi

Dissertations

In motion generation, the objective is to calculate the mechanism parameters required to achieve or approximate a set of prescribed rigid-body positions. This doctoral dissertation study is aimed to integrate the classical kinematic analysis of a planar four-bar and geared five-bar motion generation with three structural design constraints. These constraints consider driving link static torque, deflection of the crank and buckling of the follower for a given rigid-body load or constant external load.

This kineto-elastostatic analysis is based on the following assumptions to be considered during the analysis; the crank and the follower are elastic members and the coupler is …

Loss Of Synchrony In An Inhibitory Network Of Type-I Oscillators, Myongkeun Oh

Dissertations

Synchronization of excitable cells coupled by reciprocal inhibition is a topic of significant interest due to the important role that inhibitory synaptic interaction plays in the generation and regulation of coherent rhythmic activity in a variety of neural systems. While recent work revealed the synchronizing influence of inhibitory coupling on the dynamics of many networks, it is known that strong coupling can destabilize phase-locked firing. Here we examine the loss of synchrony caused by an increase in inhibitory coupling in networks of type-I Morris-Lecar model oscillators, which is characterized by a period-doubling cascade and leads to mode-locked states with alternation …

Synchrotron Radiation-Based Characterization Of Gan- Based Mqw Structures And Strongly Correlated Materials, Sean M. O'Malley

Dissertations

The following dissertation applies synchrotron radiation-based characterization techniques to the fields of gallium nitrides, multiferroic manganites, and self-assembled nano-domain oxide films. These material systems were chosen due to their unusual properties and potential device applications, which have made them very attractive to the scientific community.

Synchrotron-based High Resolution X-ray Diffraction (HRXRD) was used to characterize the structural properties of GaN-based multiple quantum well (MQW) structures grown on trapezoidal shaped GaN ridges. Results where interpreted within the framework of vapor-phase diffusion and surface-migration effects during the metalorganic vapor phase epitaxial growth. The relatively short diffusion length of group- III precursors and …

Voting In Group Support Systems : Theory, Implementation, And Results From An Exploratory Study, Kung-E Cheng

Dissertations

Group decision making is essential in organizations. Group Support Systems (GSS) can aide groups in making decisions by providing tools and process support. GSS is especially useful for geographically or temporally distributed groups. Researchers of GSS have pointed out that convergence processes are hard to accomplish in GSS. Voting tools in GSS can be a valuable asset in alleviating the difficulty of convergence processes because voting is a concise communication of individual preferences with a well defined procedure that is accepted by group members. In addition, voting results can serve as a group memory of the convergence processes. Field observations …

Sustainable Site Remediation : A Life Cycle Assessment Approach, Harnoor Dhaliwal

Theses

Remediation of contaminated areas is often a resource-intensive activity that itself can create environmental burdens. Life cycle assessment (LCA) was used as a tool to examine the environmental impacts associated with remediation activities. A hypothetical contaminated site with five remediation alternatives was developed for this analysis. The results of Life cycle Impact Assessment (LCIA) indicated that greater site activity in terms of transportation, material and equipment use translated into higher environmental impacts.

A sensitivity analysis was performed to evaluate the environmental impacts further in different time horizons. The results showed that choice of time horizon can have a significant effect …

Study And Development Of Ultrasound Monitoring Of Skeletal Defects, Kavil Patel

Theses

Fatigue fractures are fine disruptions of normal bone architecture whose identification is often unreliable or difficult using x-rays (Robinson, Wilson et al.; Kundel 2004; Swischuk and Hernandez 2004). A fatigue fracture results from the application of abnormal loads to a bone with normal elastic resistance and is associated with new or different activity, and strenuous or repeated activity. The feasibility of using ultrasound to detect and monitor fatigue fractures and other structural damage in bone was established in this study.

The use of Low Transient Pulse (LTP) technology to drive the ultrasound transducers proved to enhance detection resolution and quality …

Road-Based Proactive Routing Protocols For Vehicular Networks, Neeraj Mahadevrao Rajgure

Theses

Vehicular networks are formed by vehicles communicating in an ad hoc manner or through cellular and IEEE 802.11 base stations. Routing in vehicular networks is challenging due to highly dynamic network topologies. Previous research done at the UbiNetS lab at NJIT has proposed the idea of Road-Based using Vehicular Traffic information (RBVT) routing. In RBVT, routes are sequences of road intersections, and geographical forwarding is used for sending packets between the intersections.

This thesis proposes two proactive RBVT protocols (RBVT-P and RBVT-PS) for city-based Vehicular Ad hoc NETworks (VANETs). RBVT-P is a completely distributed protocol that unicasts connectivity packets in …

Rna Secondary Structure Detection Programs With An Emphasis On Covariance Models, Justin Slotman

Theses

RNA secondary structure prediction requires a different approach from traditional alignment methods. Functional RNAs often have their secondary structure better conserved than their primary structure. Covariance models, probabilistic models that utilize stochastic-context-free grammars, are one approach. CMs allow for homology to be detected where purely sequence-based methods would fail. A background on CMs is given, as well as a background of the major classes of non-coding RNAs (ncRNAs). Comparisons are made between some CM-using tools (the Infernal suite and CMfinder) and some other RNA secondary structure tools (CARNAC, miRNAminer, Pfold, Mfold) as well as between Infernal and the primary alignment …

Thermochemistry And Bond Energies Of Nitro -Alkanes, -Alkenes, -Carbonyls And Corresponding Nitrites, Surawee Snitsiriwat

Theses

Density functional and ab initio theory based calculations were performed on a series of nitro -alkanes, -alkenes, carbonyl and corresponding nitrites representing large-scale primary, secondary and tertiary nitro compounds and their radicals resulting from the loss of skeletal hydrogen atoms. Geometries, vibration frequencies and thermochemical properties, ΔfH°₂₉₈, S °(T) and C°p(T) (10K T 5 5000K) are calculated at the individual B3LYP/6-31G(d,p), B3LYP /6-31+G(2d,2p) and composite CBS-QB3 levels. Potential energy barriers for the internal rotations have been computed at the B3LYP/6-31G(d, p) level of theory and the lower barrier contributions are incorporated into entropy and heat capacity data. The …

Njit Highlanders Women's Soccer 2009 Media Guide, New Jersey Institute Of Technology Athletic Department

Soccer - Women's

No abstract provided.

Njit Highlanders Men's Volleyball 2009 Media Guide, New Jersey Institute Of Technology Athletic Department

Volleyball - Men's

No abstract provided.

Njit Highlanders Tennis 2008-09 Media Guide, New Jersey Institute Of Technology Athletic Department

Tennis

No abstract provided.

Njit Highlanders 2008-09 Fencing Media Guide, New Jersey Institute Of Technology Athletic Department

Fencing

No abstract provided.

Njit Highlanders Swimming & Diving 2008 Media Guide, New Jersey Institute Of Technology Athletic Department

Swimming and Diving

No abstract provided.

On The Rolling Motion Of Viscous Fluid On A Rigid Surface, Xinli Wang

Dissertations

This thesis considers two closely related problems. First, the influence of insoluble surfactant at a moving contact line is considered. This work is mostly motivated by the air entrainment during the coating process where there is a three-phase contact point (e.g., air, liquid and solid). For moving contact line problems, when the fluid is assumed to be an incompressible Newtonian fluid and a no-slip boundary condition is enforced at the solid boundary, the non-integrable stress singularity arises at the contact line, which is physically unrealistic. The contact angle of 180° is considered as a special case in which the singularity …

A Mathematical And Computational Exploration Of The Effect Of The A-Current In Determining The Activity Phase Of Follower Neurons, Yu Zhang

Dissertations

Bursting oscillations are prevalent in neurons of central pattern generators (CPGs) that produce rhythmic motor activity, and the activity phase plays an important role in determining the normal or dysfunctional network output. The activity phase is the delay time-with respect to some reference time in each cycle and normalized by the oscillation cycle period-of the onset of action potentials by a neuron. This dissertation investigates how the A-current, in conjunction with other intrinsic properties, sets the activity phase of a neuron driven by inhibition.

This dissertation is divided into two major components. In the first component, methods of dynamical systems …

Service Supply Chain Management : A Hierarchical Decision Modeling Approach, Roger Angel Solano-Cayama

Dissertations

A Service Supply Chain (SSC) may be described as a network of service provider facilities (in-house or outsourced), each of which is able to process one or more service tasks on an as needed basis. Two key characteristics of a SSC are (i) the business service is decomposable into several sequential tasks that can be processed by different service providers, and (ii) the primary capacity resource is skilled labor. SSCs are increasingly being developed by companies that experience a high variability of demand for their services (e.g., loan processing, analytical consulting services, emergency repair crews, claims processing, etc.). Typically, the …

Investigation Into The Acupuncture And Meridian System, Jingong Pan

Dissertations

The Meridian system conceived by the ancient Chinese has been described and referenced for more than a thousand years. The Meridians meaning paths are the main trunks that run longitudinally within the body. The Meridian system consists of about 400 acupuncture nodes and 20 Meridian channels connecting most of these points. It deals with the routing and distribution of certain signals that may affect physiological functions. It integrates meridians, tissues and organs into a complex system.

Initially, modeling of the acupuncture system is investigated. The physical effect of injecting an acupuncture needle at a node is suggested by an equivalent …

Degradation Of Polylactic Acid In The Presence Of Microsize And Nanosize Fillers, Quyuan Zhou

Dissertations

Polylactide (PLA)-cationic (montmorillonite, MMT) and anionic (hydrotalcite, HT) clay micro- or nanocomposites based on semicrystalline and amorphous polymers and unmodified and organomodified as well as calcined or non-calcined clays at 5wt% concentration are produced by melt mixing. Depending on the clay type, presence of organomodifiers and calcination, micro- or nanocomposites are produced, as confirmed by XRD and SEM analysis.

Unfilled polymers and their composites are subjected to isothermal degradation in air at 180°C and 200°C. Degradation rate constants are calculated from novel equations incorporating IV. Results show that the thermal degradation rate constants of the amorphous PLA and its composites …

Flexible Electronics : Materials And Sensor Fabrication, Katherine J. Duncan

Dissertations

This dissertation demonstrates how to fabricate piezoelectric/pyroelectric thin films by using different printing techniques. These techniques could replace vacuum techniques for manufacturing piezoelectric/pyroelectric sensors. Ink-jet, screen and stencil printing techniques were developed to print these devices.

This work outlines attempts to develop a solution processable conductive ink for ink-jet printing. It then details the printing of commercial conductive ink on flexible substrates employing the three printing methods. Raman spectroscopy and Fourier transform infrared spectroscopy, are both used to investigate the structure of the P(VDF-TrFE) films. Optical microscopy is used to investigate the thickness and uniformity of the deposited films. The …

A Two Dimensional Model Of Magnetic Field Assisted Assembly, Gaurev Devrani

Theses

A simplified model to simulate the magnetic field distribution for applications in magnetic field assisted assembly of semiconductor device structures, using commercial software (Vizimag), has been implemented. Solenoids have been utilized to serve as electromagnets that are responsible for the assembly process. Magnetic shielding techniques have been deployed to isolate the influence of one solenoid over another. These solenoids are used to move the devices that need to be placed in recesses within the substrate. The bottom of the devices and the recesses are coated with magnetic materials to facilitate the movement and placement of devices within the recesses in …

Classification Of Hand Held Shapes And Locations In Continuous Signing, Swetha Karri

Theses

Sign language for the deaf and hearing impaired replaces speech with manually produced signs. Each sign has been categorized as being combinations of handshape, movement, orientation, location, and facial expressions. Of the five sign parameters, this thesis focuses on classification of two of the main parameters, the hand shapes and locations, in continuous signing.

Since the nature of hand shapes is transient and not static, neural networks was used as a classifier for hand shapes. And since locations in sign language are defined by linguistic variables rather than by hard core position values, fuzzy logic was used as a classifier …

Developing A Virtual City For Emergency Preparedness Planning And Training, Jon K. Morgan

Theses

Existing techniques for emergency preparedness planning and training fail or lack the ability to convey training on a broad scale and timely fashion. Skill sets that are required for planning, mitigation, response and recovery issues are lost through information overload or failure to identify other channels in which to convey the information. In order to resolve some of the issues with currently existing methods such as tabletop training exercises (TTX), instructional video learning and full-scale exercises we can turn to virtual environments.

In a virtual environment teams can interact with their surroundings from the comfort of the office without having …