Digital Commons Network^™

Development Of Composite Pcms By Incorporation Of Paraffin Into Various Building Materials, Shazim Ali Memon, Wenyu Liao, Shuqing Yang, Hongzhi Cui, Syed Farasat Ali Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this research, we focused on the development of composite phase-change materials (CPCMs) by incorporation of a paraffin through vacuum impregnation in widely used building materials (Kaolin and ground granulated blast-furnace slag (GGBS)). The composite PCMs were characterized using environmental scanning electron microscopy (ESEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. Moreover, thermal performance of cement paste composite PCM panels was evaluated using a self-designed heating system. Test results showed that the maximum percentage of paraffin retained by Kaolin and GGBS was found to be 18% and 9%, respectively. FT-IR results show that …

Narrow-Band Search Of Continuous Gravitational-Wave Signals From Crab And Vela Pulsars In Virgo Vsr4 Data, J. Aasi, Marco Cavaglia, For Full List Of Authors, See Publisher's Website.

Physics Faculty Research & Creative Works

In this paper we present the results of a coherent narrow-band search for continuous gravitational-wave signals from the Crab and Vela pulsars conducted on Virgo VSR4 data. In order to take into account a possible small mismatch between the gravitational-wave frequency and two times the star rotation frequency, inferred from measurement of the electromagnetic pulse rate, a range of 0.02 Hz around two times the star rotational frequency has been searched for both the pulsars. No evidence for a signal has been found and 95% confidence level upper limits have been computed assuming both that polarization parameters are completely unknown …

Numerical Simulations Of Surface Charging At The Lunar Terminator, Daoru Frank Han, Joseph J. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A full-particle particle-in-cell (PIC) simulation model is developed to perform fully-kinetic simulations of surface-plasma interactions at the lunar terminator region. This model uses a non-homogeneous immersed-finite-element (IFE) solver to calculate the electric field discontinuity (flux jump) at the plasma-surface interface and surface charging for realistic lunar surface terrain. The simulation includes all plasma species, including the solar wind electrons and ions, as well as photoelectrons with real proton-to-electron mass ratio so the kinetic properties in the mesothermal flow are resolved. We present simulation results of surface charging around a lunar hill at the lunar terminator region.

Adaptable Ring, Bayes Theorem And Dual Gradient Analysis: An Approach To Automatic Shape Detection, Skin Lesion Segmentation And Focus Detection Respectively For Medical Image Analysis, Kanakam T. Maddala

Masters Theses

“Vision-based applications are increasing with the increase in technology and are making a huge impact in this global civilization. A vision-based measurement approach for pill shape detection was developed for medical pill identification, a focus detection method was developed for digital dermoscopy, and a machine learning approach was used for automatic lesion segmentation, which assists in automatic melanoma diagnosis. Rapid and accurate pill identification is needed by medical and law enforcement personnel during emergencies. But, one of the main parameters in pill identification is the shape of the pill. An Adaptable-Ring approach describes a novel technique to accurately detect the …

Online Diagnosis Of Diabetes With Twitter Data, Farheen Ali

Masters Theses

"Innovation in technology enables people to communicate, share information and look for their needs by just sitting in rooms and going through some clicks. While social media has played a very important role in connecting people worldwide, its potential has stretched beyond the innovative idea of connecting people through their social networks. While many thought there was no meeting point for the healthcare sector and social media, it was a surprise when research and innovations have shown that social media could lay a very significant role in the health care sector.

Research has been done in developing models that could …

Evaluation Of Preformed Particle Gel Treatment Using Homogeneous And Heterogeneous Models, Hilary Ogochukwu Elue

Masters Theses

"This research investigates the effects of preformed particle gel (PPG) in remedying the problems of excess water production and low oil recovery of heterogeneous reservoirs by placing the PPG in the high-permeability layer, thus diverting displacing brine to the unswept low permeability layer. This investigation was completed with three tasks.

The first task was to evaluate the PPG swelling kinetics and strength as a function of concentration of brine. The result of this task indicate that PPG prepared with low concentration of brine swells more, becomes weaker, more deformable than PPG prepared with high concentration of brine.

The second task …

Thermographic Investigation Of Laser Metal Deposition, Sreekar Karnati

Masters Theses

"Laser metal deposition as an additive manufacturing technique has been proven to possess the capability for fabricating complex, intricate geometries and excellent material properties through material deposition. Accurate manufacture of such geometric features would require precise control over the material deposition process. The need of the hour are process monitoring and analyses mechanisms that are crucial in ascertaining the occurrence of the intended actions during deposition while also serving as effective learning tools. The current work involved developing and incorporating an Infra-Red (IR) camera as a process monitoring tool for laser metal deposition. Using the IR camera the thermal dynamics …

Design And Implementation Of A 20 Ghz Ultra-Wide Bandwidth Channel Emulator For Differential High Speed Serial Data Links, Wei Qian

Masters Theses

"High speed serial link is now the dominant signal propagation design in various communication, computing and embedded applications. Emulation of such channels is important in signal integrity design and product testing, where full channel simulation is restricted due to the need for protection of intellectual property and frequent channel reconfiguration. This thesis introduces robust lossy material and FIR filter design methods that can be used for channel emulation to provide a solution under these restrictions. Based on the channel characterizations normally obtained in the frequency domain by vector network analysis, different emulation strategies and optimization techniques are utilized to emulate …

Energy Disaggregation In Nialm Using Hidden Markov Models, Anusha Sankara

Masters Theses

"This work presents an appliance disaggregation technique to handle the fundamental goal of the Non-Intrusive Appliance Load Monitoring (NIALM) problem i.e., a simple breakdown of an appliance level energy consumption of a house. It also presents the modeling of individual appliances as load models using hidden Markov models and combined appliances as a single load model using factorial hidden Markov models. Granularity of the power readings of the disaggregated appliances matches with that of the readings collected at the service entrance. Accuracy of the proposed algorithm is evaluated using publicly released Tracebase data sets and UK-DALE data sets at various …

A Novel Entropy Production Based Full-Chip Tsv Fatigue Analysis, Tianchen Wang

Masters Theses

"Through-silicon vias (TSVs) are subject to thermal fatigue due to stress over time, no matter how small the stress is. Existing works on TSV fatigue all rely on measurement-based parameters to estimate the lifetime, and cannot consider detailed thermal profiles. In this paper, we propose a new method for TSV fatigue prediction using entropy production during thermal cycles. By combining thermodynamics and mechanics laws, the fatigue process can be quantitatively evaluated with detailed thermal profiles. Experimental results show that interestingly, the landing pad possesses the most easy-to-fail region, which generates up to 50% more entropy compared with the TSV body. …

Adjoint-Based Airfoil Shape Optimization In Transonic Flow, Joe-Ray Gramanzini

Masters Theses

"The primary focus of this work is efficient aerodynamic shape optimization in transonic flow. Adjoint-based optimization techniques are employed on airfoil sections and evaluated in terms of computational accuracy as well as efficiency. This study examines two test cases proposed by the AIAA Aerodynamic Design Optimization Discussion Group. The first is a two-dimensional, transonic, inviscid, non-lifting optimization of a Modified-NACA 0012 airfoil. The second is a two-dimensional, transonic, viscous optimization problem using a RAE 2822 airfoil. The FUN3D CFD code of NASA Langley Research Center is used as the ow solver for the gradient-based optimization cases. Two shape parameterization techniques …

The Effects Of Short Delay Times On Rock Fragmentation In Bench Blasts, Margaret Ruth Hettinger

Masters Theses

"Optimized rock fragmentation is essential for minimizing downstream costs to mining operations. Photographic fragmentation analysis, vibration monitoring, and high-speed video all provide measurements of blast effectiveness and supply data that allows operations to modify blasts to achieve downstream goals.

This study evaluates the effects of short hole-to-hole delay times on rock fragmentation. Photographic fragmentation analysis and various delay times were used on the same bench blast, the effects of timing on fragmentation were determined. This analysis provides a representative understanding of timing effects on fragmentation in the field, different from previous blast models which either negate the effects of timing …

Design And Implementation Of A Broker For Cloud Additive Manufacturing Services, Venkata Prashant Modekurthy

Masters Theses

"The growing number of cloud Additive Manufacturing (AM) services, offered by different providers over the Internet, makes it challenging for consumers to compare these cloud AM services to select a service of their choice. In addition, it is even more challenging for consumers to compare these cloud AM services against their personal preferences. This is because, consumers personal preferences on multiple service attributes such as price, material, accuracy, and schedule, should be considered for cloud AM service selection. The decentralized nature of these cloud AM services coupled by the need to consider consumers personal preferences during cloud AM service selection, …

Survey And Data Analysis Of Polymer Flooding Pilot And Field Applications In China, Yandong Zhang

Masters Theses

"Enhanced oil recovery (EOR) processes are regarded as important methods to recovery remaining oil after primary and secondary recovery. It is significant to select the most appropriate EOR process among the possible techniques for a candidate reservoir. EOR screening criteria has been created using available EOR datasets and served as the first step to compare the suitability of each EOR method for a particular reservoir. Most of these datasets are collected from EOR surveys published by Oil & Gas Journal. This study proposes a comprehensive study of a dataset including 55 pilot and field polymer flooding applications in China. Statistical …

On-Die Sensors For Transient Events, Mihir Vimal Suchak

Masters Theses

"Failures caused by transient electromagnetic events like Electrostatic Discharge (ESD) are a major concern for embedded systems. The component often failing is an integrated circuit (IC). Determining which IC is affected in a multi-device system is a challenging task. Debugging errors often requires sophisticated lab setups which require intentionally disturbing and probing various parts of the system which might not be easily accessible. Opening the system and adding probes may change its response to the transient event, which further compounds the problem.

On-die transient event sensors were developed that require relatively little area on die, making them inexpensive, they consume …

A Force Feedback Haptic Interface For Atomic Force Microscopy, Abdulmohsen Alabdulmuhsin

Masters Theses

"Integrating a force feedback haptic device with atomic force microscopy (AFM) improves the capability to investigate and manipulate the objects on a micro- and nanoscale surface. The haptic device provides the researcher with a sense of touch and movement by changing the position of the stylus or amount of force on it. The developed system's concept is to provide the user a sense and feel and control of the AFM probe at the nanoscale. By positing the haptic stylus, the user generates reference to commands to the AFM probe. In turn, forces experienced by the probe are communicated to the …

Efficient Skin Segmentation Via Neural Networks: Hp-Elm And Bd-Som, C. Swaney, A. Akusok, K. M. Björk, Y. Miche, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

This Paper Presents Two Novel Methods for Skin Detection: Hp-Elm and Bd-Som. Both Som and Elm Are Fast for Large Data Sets, But Not Yet Suitable for Big Data. We Show How They Can Be Improved in Order to Fulfill the Strict Requirements for Big Data. Both New Methods Are Described and their Implementations Are Explained. a Comparison on a Large Example is Presented in the Experiment Section. We Find that Bd-Som is More Accurate but Not as Computationally Efficient as Hp-Elm. as a Result, We Show that Both Methods Work Well on a Big Data Task. the Given Task …

Extreme Learning Machine On High Dimensional And Large Data Applications, Zhiping Lin, Jiuwen Cao, Tao Chen, Yi Jin, Zhan Li Sun, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

No abstract provided.

Defensive Routines In Engineering Managers And Non-Engineering Managers -- A Case Analysis, Tyria Riley, Elizabeth A. Cudney

Engineering Management and Systems Engineering Faculty Research & Creative Works

There is a perception that engineers experience challenges in areas such as communication, conflict resolution, and leadership. Defensive routines are actions implemented as a result of being in an embarrassing or threatening situation. This research uses a case study approach to measure whether defensive routines are more common in engineering managers or non-engineering managers. Twenty-seven managers created case studies based on their unique experiences as managers. These case studies were scored, and the results of this research indicate that engineering managers employ defensive routines more commonly than non-engineering managers.

Numerical Study On Scaling Effects And Decoupled Network-Based Simulation Of Gaseous Explosion, Liang Wang

Doctoral Dissertations

"This research seeks to improve the prediction efficiency of gaseous explosions realized by numerical simulations in a full-scale underground network using a decoupled method. To provide quick predictions of overpressure distribution of methane explosions in underground airway networks, a two-section theory is employed. The explosion space is divided into a driver section and a blast-wave section. Governing equations including conservation of mass, momentum, and energy, together with chemical reaction and turbulence models are solved for the driver and the blast-wave sections using computational fluid dynamics (CFD) solver ANSYS Fluent (3D-based) and Flowmaster (1D-based) respectively. The three dimensional (3D) and one …

Investigation Of Lost Circulation Materials Impact On Fracture Gradient, Mortadha Turki Alsaba

Doctoral Dissertations

"Lost circulation is a challenging problem to be prevented or mitigated during drilling. Lost circulation treatments are widely applied to mitigate losses using a corrective approach or to prevent losses using preventive approaches, also known as "wellbore strengthening". The disagreement among the different wellbore strengthening theories and the lack of understanding the strengthening mechanism resulted in the absence of a standardized method to evaluate the effectiveness of lost circulation materials (LCM) for wellbore strengthening application.

An extensive experimental investigation was performed by constructing a high pressure LCM test apparatus to investigate the effects of different parameters on the sealing efficiency …

The Synthesis And Characterization Of Water-Reducible Nanoscale Colloidal Unimolecular Polymer (Cup) Particles, Cynthia J. Riddles

Doctoral Dissertations

"The coatings industry has adapted to more stringent guidelines in paint formulations. Current VOC (volatile organic compound) limits placed by the federal government have pushed the industry toward the development of paint formulations which have very little to no VOC's. The development of Colloidal Unimolecular Polymer (CUP) particles is a step in the direction of providing a resin system which exists in zero VOC aqueous dispersion.

The CUP particles are a part of the polymer field of Single Chain Nano Particles (SCNP) and ranged in diameters of 3-9 nm. The research presented in this dissertation describes the synthesis and design …

Non-Destructive And Destructive Bridge Deck Condition Assessment, Aleksandra V. Varnavina

Doctoral Dissertations

"The dissertation is composed of three papers, which cover the lack of information on the specific aspects of non-destructive and destructive bridge deck assessment.

In the first paper, appropriate data acquisition and processing parameters for concrete bridge deck condition assessment using ground-coupled ground penetrating radar are developed. The use of proposed parameters helps to significantly reduce acquisition and processing time, while providing engineers with reliable and detailed information on the condition of bridge deck.

In the second paper, a novel approach to develop relationship between GPR data and concrete removal depth measurements collected after hydrodemolition is proposed. A linear relationship …

Small Sample Umpu Equivalence Testing Based On Saddlepoint Approximations, Renren Zhao

Doctoral Dissertations

"In the first section, we consider small sample equivalence tests for exponentiality. Statistical inference in this setting is particularly challenging since equivalence testing procedures typically require a much larger sample size, in comparison to classical "difference tests", to perform well. We make use of Butler's marginal likelihood for the shape parameter of a gamma distribution in our development of equivalence tests for exponentiality. We consider two procedures using the principle of confidence interval inclusion, four Bayesian methods, and the uniformly most powerful unbiased (UMPU) test where a saddlepoint approximation to the intractable distribution of a canonical sufficient statistic is used. …

Development Of A Stochastic Model For Performance Characterization Of A Pv/Vrb Microgrid, Kayla M. Speidel

Masters Theses

"Photovoltaic (PV) Microgrids have been proven to be a useful technology in providing an environmentally friendly source of energy when compared to the use of fossil fuels. Accurately characterizing the performance of a microgrid system would ensure that the system is appropriately sized to meet electrical loads without a heavy reliance on diesel generators. A microgrid that is sized properly will reduce the cost of diesel fuel, while also reducing the risk of wasting money on an oversized system. A deterministic model which was created to characterize the performance of PV microgrids based on percent of time generator running was …

Cappack Devices For Enhanced Qnmr Measurements In 1H Nmr Spectroscopy, Lingyu Chi

Masters Theses

"Quantitative NMR analyses can be improved by adding well-defined external references for measuring sample properties on absolute scales. Special Capillary-tube Package (CapPack) devices were invented that provide in situ information (e.g., temperature, pH, pressure, integration, chemical shift, lock, etc.) about a sample with spectral imprimaturs. A new microscale glass-sealing technique produced CapPack devices that can survive high temperatures and pressures in harsh environments. Two CapPack devices are discussed: (1) Gradient CapPack-- a device for examining the irradiation bandwidth of solvent-suppression pulse sequences; (2) T₁ CapPack - a device for examining the T₁ robustness of solvent-suppression pulse sequences. A …

Common Path Pessimism Removal In Static Timing Analysis, Chunyu Wang

Masters Theses

"Static timing analysis is a key process to guarantee timing closure for modern IC designs. However, additional pessimism can significantly increase the difficulty to achieve timing closure. Common path pessimism removal (CPPR) is a prevalent step to achieve accurate timing signoff. To speed up the existing exhaustive exploration on all paths in a design, this thesis introduces a fast multi-threading timing analysis for removing common path pessimism based on block-based static timing analysis. Experimental results show that the proposed method has faster runtime in removing excess pessimism from clock paths."--Abstract, page iii.

Design And Implementation Of Low Complexity Wake-Up Receiver For Underwater Acoustic Sensor Networks, Ming Yue

Masters Theses

"This thesis designs a low-complexity dual Pseudorandom Noise (PN) scheme for identity (ID) detection and coarse frame synchronization. The two PN sequences for a node are identical and are separated by a specified length of gap which serves as the ID of different sensor nodes. The dual PN sequences are short in length but are capable of combating severe underwater acoustic (UWA) multipath fading channels that exhibit time varying impulse responses up to 100 taps. The receiver ID detection is implemented on a microcontroller MSP430F5529 by calculating the correlation between the two segments of the PN sequence with the specified …

A Decision Support Simulation Model For Bed Management In Healthcare, Raja A. Baru

Masters Theses

"In order to provide access to care in a timely manner, it is necessary to effectively manage the allocation of limited resources such as beds. Bed management is key to the effective delivery of high-quality and low-cost healthcare. An efficient utilization of beds requires a detailed understanding of the hospital's operational behavior. It is necessary to understand the behavior of a hospital in order to make necessary adjustments to its resources, and policies, which can improve patient's access to care. The aim of this research was to develop a discrete event simulation to assist in planning and staff scheduling decisions. …

Performance Metrics For Powder Feeder Systems In Additive Manufacturing, Venkata Sivaram Bitragunta

Masters Theses

"In blown powder Direct Metal Deposition (DMD) process, parts are built by adding metal powder on the melt pool created by the laser system. At low feed rates powder feeder systems have perturbations. The study focused on relationship between the perturbation frequencies by inherent powder feeder designs and its impact on deposition quality. Performance metric determine the relation between perturbations in the powder flow and quality of the deposit. To determine performance metric, various powder feeder designs were analyzed. Perturbation frequencies were introduced to the disk feeder design. The quality of the deposit was determined by the surface roughness of …