Digital Commons Network^™

Engine Sound Simulation And Generation In Driving Simulator, Shuang Wu

Masters Theses

"Simulating a driving environment that provides engine sound as auditory feedback to the driver is a challenging task due to the complexity of engine sound, a wide range of operating speeds, and repeated sound clicking during playback. This thesis describes a method of engine sound simulation and generation for a driving simulator. By analyzing sample sounds, spectral modeling synthesis was used to decompose the sound samples into deterministic and stochastic components. Then, the modeled deterministic and stochastic signals were employed to resynthesize the sounds. To represent engine sounds not available in the recorded database, sound interpolation was applied to two …

Effect Of Timing And Source Of Online Product Recommendations: An Eye-Tracking Study, Qing Zeng

Masters Theses

"Online retail business has become an emerging market for almost all business owners. Online recommender systems provide better services to the consumers as well as assist consumers with their decision making processes. In this study, a controlled lab experiment was conducted to assess the effect of recommendation timing (early, mid, and late) and recommendation source (expert reviews vs. consumer reviews) on e-commerce users' interest and attention. Eye-tracking data was extracted from the experiment and analyzed. The results suggest that users show more interest in recommendation based on consumer reviews than recommendation based on expert reviews. Earlier recommendations do not receive …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

A Linear Matrix Inequality-Based Approach For The Computation Of Actuator Bandwidth Limits In Adaptive Control, Daniel Robert Wagner

Masters Theses

"Linear matrix inequalities and convex optimization techniques have become popular tools to solve nontrivial problems in the field of adaptive control. Specifically, the stability of adaptive control laws in the presence of actuator dynamics remains as an important open control problem. In this thesis, we present a linear matrix inequalities-based hedging approach and evaluate it for model reference adaptive control of an uncertain dynamical system in the presence of actuator dynamics. The ideal reference dynamics are modified such that the hedging approach allows the correct adaptation without being hindered by the presence of actuator dynamics. The hedging approach is first …

Mitigation Of Wellbore Instability In Deviated Wells By Using Geomechanical Models And Mpd Technique, Husam Raad Abbood

Masters Theses

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe presents a significant wellbore stability problem for deviated wells. In this study, two solutions are utilized to address this problem. The first approach is a 1-D Geomechanical model of the Mishrif formation compiled based on the state of stress and rock strength parameters. It is utilized to assess the contribution of borehole collapse leading to the stuck pipe problems. The results of this study show that wells characterized by stuck pipe are drilled along azimuths which promote wellbore collapse. Three different failure criteria, the …

Design And Analysis Of An Axisymmetric Aerospike Supersonic Micro-Nozzle For A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Abdalla Ali Bani

Masters Theses

"The cold-gas propulsion system being developed by M-SAT requires improvements to its original nozzle design. This study documents the research, design, and analysis of a supersonic plug nozzle concept that could be integrated to the refrigerant-based cold-gas propulsion system to possibly improve its performance. As documented in this thesis, CFD analysis showed that the outlined nozzle design method resulted in a feasible nozzle concept that has the ability to out-perform a conventional nozzle of the same area ratio. The flow-fields and thrust of the aerospike nozzle, for the full and truncated nozzles, were investigated. The purpose of this study is …

Voltage Control In A Distribution System Using Active Power Loads, Mounika Chava

Masters Theses

"High penetration of renewable energy resources such as rooftop solar photovoltaic (PV) systems is exacerbating violations of the voltage limits in power distribution networks. Existing solutions to these over-/under-voltage issues include tap-changing transformers and shunt capacitors. However, tap changers only allow voltage changes in discrete steps and shunt capacitors cannot handle over-voltage situations. To overcome these problems, this thesis proposes voltage control in a distribution system by adjusting active power loads. The proposed solution can be used for both under- and over-voltage cases at any levels of voltage adjustment. First, the active power that needs to be adjusted at selected …

Design, Scale-Up, Six Sigma In Processing Different Feedstocks In A Fixed Bed Downdraft Biomass Gasifier, Sai Chandra Teja Boravelli

Masters Theses

"This thesis mainly focuses on design and process development of a downdraft biomass gasification processes. The objective is to develop a gasifier and process of gasification for a continuous steady state process. A lab scale downdraft gasifier was designed to develop the process and obtain optimum operating procedure.

Sustainable and dependable sources such as biomass are potential sources of renewable energy and have a reasonable motivation to be used in developing a small scale energy production plant for countries such as Canada where wood stocks are more reliable sources than fossil fuels. This thesis addresses the process of thermal conversion …

An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding

Masters Theses

"Micrometer-size particle gel (microgel) has been developed and successfully applied to improve conformance in mature reservoirs. However, quite few researches have been published to address on their effect on oil recovery and rock permeability modification.

This work conducted a series of core flooding experiments to investigate the injectivity, plugging efficiency and improving oil recovery potentials of a couple of microgels synthesized in our lab.

First, this work studied the impact of permeability and crosslinker concentration on PAM type microgel treatment. Results shows that microgel treatment would have a less plugging efficiency in lower permeability rocks, which could be caused by …

Addressing The Influence Of Carbon Monoxide On The Behavior Of An Hcci Engine, Allen Charles Ernst

Masters Theses

"Homogeneous Charge Compression Ignition (HCCI) may be the next leap of improvement to internal combustion engines due to its decreased emissions and improved engine efficiencies. However, such a jump possesses challenges owing to its strict reliance on the inherent physics that dictate start of combustion and limit the reach of stable operation. This work investigates the role and fundamental influence of carbon monoxide on the cycle-to-cycle combustion dynamics present in the region of incomplete combustion that frames the limited HCCI operating region. An improved understanding will open doors to enhanced control methodologies and an expanded stable operating envelope. A constant …

Characterization Of Electric Solid Propellant Pulsed Microthrusters, Matthew Scott Glascock

Masters Theses

"Electric solid propellants are an attractive option for space propulsion because they are ignited by applied electric power only. In this work, the behavior of pulsed microthruster devices utilizing such a material is investigated. These devices are similar in function and operation to the pulsed plasma thruster, which typically uses Teflon as propellant. A Faraday probe, Langmuir triple probe, residual gas analyzer, pendulum thrust stand and high speed camera are utilized as diagnostic devices. These thrusters are made in batches, of which a few devices were tested experimentally in vacuum environments. Results indicate a plume electron temperature of about 1.7 …

Impact Of Repeated Cyclic Production Scheme On Eur In Low-Permeability Reservoirs, Samarth Gupte

Masters Theses

"Productivity in low-permeability reservoirs declines quickly compared to conventional reservoirs. These tight reservoirs have very high initial oil production rates but as soon as the oil near the fractured area is recovered, the production declines rapidly making economic oil and gas production a challenge for the industry. This study investigates the impact of repeated shut-in/production cycles on the ultimate recovery of oil in such environments.

A reservoir model with multiple fractured horizontal well having 30 transverse fractures is created using CMG. Reservoir permeability is varied over the range of 0.000001 md to 10 md and shut-in/production cycles of 2-weeks, 1-month, …

Single Phase Gas Flow Response Of Fractured Horizontal And Vertical Wells To Repeated Production, Divya Kandlakunta

Masters Theses

"Historically, the conventional approach to well production has been to produce continuously, minimizing interruptions to flow insofar as possible. Yet some operators have observed improved well flow rates and ultimate recovery after a significant well shut-in periods. These production increases have not been documented. This study investigates the production impact of cyclic production/shut-in on fractured vertical and horizontal gas well performance.

A numerical reservoir model in Stimplan software was used to model production in fracture stimulated vertical and horizontal gas wells. Reservoir permeability is varied over a range of 0.0001 md to 1 md, and the shut-in period was varied …

Studies On Flocculation Of Fine Mineral Tailings Using Novel Polyacrylamide Based Polymer, Simin Khatibi

Masters Theses

"One of the important features in managing or treating sulfide fine tailings is separating solids from liquid by settling test. This thesis presents results of studied conducted on flocculation of Kaolin suspensions (a model tailings) and sulfide mineral tailings. Two polymers (PAM and Al-PAM) were tested as flocculants. The zeta potential value of slurries was measured by Nano Zetasizer device.

Al-PAM was found to be more effective for flocculation of kaolinite samples and also sulfide samples while PAM with used concentration was not. This study represents the power of flocculation as a possible solution to deal with industrial tailings"--Abstract, page …

Using Eye-Tracking To Understand User Behavior In Deception Detection System Interaction, Prashanth Kumar Lakkapragada

Masters Theses

"This research presents the analysis of data collected using eye-tracking devices on user interaction with a deception detection system. The differences between two groups of subjects, namely Innocent and Guilty, were compared, where Innocent subjects did not carry any explosive and hence, had nothing to hide in declaring objects that they were carrying whereas Guilty subjects had to lie to deceive the system. The results indicate that there is no significant difference in pupil dilation between the Innocent and Guilty subjects. However, the amount of fixations on the empty spaces of slides containing an explosive image can be used to …

Protection Of A 138/34.5 Kv Transformer Using Sel 387-6 Relay, Aamani Lakkaraju

Masters Theses

"Schweitzer Engineering laboratories (SEL) donated the SEL 387, SEL 311L, and SEL 351S relays and the SEL AMS to Missouri University of Science and Technology. This thesis documents the demonstration approach to set the SEL 387 relay to protect a grounded wye-grounded wye transformer and then test these settings by injecting fault currents into the relay using the SEL AMS. This thesis explains the approach to set the differential element of the SEL 387 relay to protect a transformer against internal faults and the overcurrent element of the SEL 387 relay to protect transformer against external faults. A radial power …

Periclinal Folding In Ozark Plateau: A Record Of Local Karst Collapse Or Regional Tectonic Forces?, Chao Liu

Masters Theses

"The Ordovician Rubidoux Formation of the Ozark Plateau, Missouri is typically identified as mechanically competent sub-horizontal beds of medium grained sandstone. North of Licking, MO, the Rubidoux Formation was deformed into a series of dome-and-basin shaped buckle folds, exposed in road cuts over a distance of ~10 km. Such folds are highly unusual within the Ozark Plateau and their origin remains controversial. Three major hypotheses have been proposed based on field observations and stereographic analysis. Given the pervasive distribution of karst collapse throughout Missouri, one hypothesis to explain these folds is that the Roubidoux Formation sagged into collapsed caverns. A …

Origin Of Lacustrine Carbonate-Dominated Clinoforms In The Lower-Permian Lucaogou Low-Order Cycle, Southern Bogda Mountains, Nw China, Yiran Lu

Masters Theses

"Lacustrine carbonate clinoforms deposit can reflect ancient lake condition like paleoclimate and lake type. Complex lithofacies of a carbonate-dominated clinoform package in lower Permian Lucaogou low order cycle, Bogda Mountains, NW China, provide clues on clinoform-forming processes in a half-graben lake. The clinoform package is ~5.2 m thick, prograding from S to N for ~200 m with a maximum 15o dip angle, and spans ~4 km laterally. A clinoform consists of a lower siliciclastic-rich and an upper carbonate-rich beds, forming a clinoform cycle. Results of petrographic study of 30 thin sections suggest that the clinoform package is composed of mixed …

Construction And Validation Of Tl-Ipm Generator, Jamaluddin Mohammad

Masters Theses

"Hydrokinetic energy is one of the potential sources of energy that can be extracted and converted to electrical energy using linear generator. This work discusses about construction and validation of tubular linear internal permanent magnet (TL-IPM) generator, a kind of linear generator. The generator could produce electricity by converting linear motion generated from vortex induced vibrations induced due from a flowing fluid, such as a river. A simulation model of the generator is created using Ansoft's Maxwell software, which uses finite element analysis to perform electromagnetic analysis of the generator. Then a practical generator was built and tested. The results …

Computational Fluid Dynamics (Cfd) Simulations Of Molten Steel Flow Patterns And Particle-Wall Adhesion In Continuous Casting Of Steels, Mahdi Mohammadi-Ghaleni

Masters Theses

"In this research, the measurements of clog deposit thickness on the interior surfaces of a continuous casting nozzle were compared with Computational Fluid Dynamics (CFD) predictions of melt flow patterns and particle-wall interactions to identify the mechanisms of nozzle clogging. A hybrid turbulent approach, Detached Eddy Simulation (DES), was configured to simulate both turbulent structures and particle-wall interactions inside the nozzle accurately. For experimental measurements of nozzle clogging, a nozzle received from industry was encased in epoxy and carefully sectioned to allow measurement of the deposit thickness on the internal surfaces of the nozzle. CFD simulations of melt flow patterns …

Surface Modification Of Tin Oxide Nanoparticles By Atomic Layer Deposition For Enhanced Electrochemical Performance, Sai Abhishek Palaparty

Masters Theses

"Atomic Layer Deposition is a robust technique used to deposit high quality, conformal, and size-tunable ultrathin films on a substrate. This technique can be used to coat protective films on battery anode and cathode materials for enhanced performance. In the case of cathodes, the ultrathin film provides a protective barrier preventing cationic dissolution. In the case of anodes, the film acts as a supporting matrix reducing strain caused by volume expansions. In these study, we use this technique to coat an optimally thick conductive iron oxide film on tin oxide particles to improve its electrochemical performance at high current densities …

Provenance And Depositional Environments Of Fluvial-Lacustrine Sandstones Of Lower Permian Lucaogou Low-Order Cycle, Bogda Mountains, Nw China, Xiaowei Peng

Masters Theses

"Compositional and textural maturity of sandstones may reflect provenance lithology and sediment transport distance, which are useful for paleogeographic reconstruction. 37 sandstones in six outcrop stratigraphic sections in Tarlong-Taodonggou and Zhaobishan areas in the greater Turpan-Junggar rift basin were studied to investigate the fluvial-lacustrine sandstone provenance in lower Permian Lucaogou (LCG) low-order cycle, Bogda Mountains, NW China. 400 points were counted in each thin section. All the samples are classified into lithic arenites, subarenites, wackes, and mudrocks. Three Petrofacies are defined. Petrofacies A is characterized by a high lithic content which is dominantly basaltic lithics with minor sedimentary lithics and …

Event-Sampled Direct Adaptive Neural Network Control Of Uncertain Strict-Feedback System With Application To Quadrotor Unmanned Aerial Vehicle, Nathan Szanto

Masters Theses

"Neural networks (NNs) are utilized in the backstepping approach to design a control input by approximating unknown dynamics of the strict-feedback nonlinear system with event-sampled inputs. The system state vector is assumed to be unknown and an observer is used to estimate the state vector. By using the estimated state vector and backstepping design approach, an event-sampled controller is introduced. As part of the controller design, first, input-to-state-like stability (ISS) for a continuously sampled controller that has been injected with bounded measurement errors is demonstrated and, subsequently, an event-execution control law is derived such that the measurement errors are guaranteed …

Hydrodynamic Of A Co-Current Gas Liquid Upflow In A Moving Packed Bed Reactor With Porous Catalysts, Ali Jabbar Toukan

Masters Theses

"In this study, the hydrodynamic, i.e. flow regime identification, line average liquid holdup, and the internal liquid holdup of a co-current moving packed bed reactor were studied. For the sake of hydrodynamics study, moving bed reactor is investigated as two-phase upflow packed bed reactor. Scaled down configuration was used to simulate of the moving bed reactors utilized in the industrial process. First, line average liquid holdup is measured with different geometrical configurations covering empty, dry, wet, and packed column under flowrates operation conditions. A new methodology has been developed to determine the line average liquid holdup for a porous catalyst. …

Reduction Of Emi Due To Common Mode Current Using Common Mode Filter Or Lossy Material, Qian Liu

Masters Theses

"This thesis consists of four papers. In the first paper, two new common mode filter structures were designed, fabricated, and measured. A "sandwich-type" EBG structure that resonates at the desired filter frequency is designed to suppress common mode filter on differential signals. The new filters are placed on top of the PCB as a surface-mount component, instead of being implemented within the PCB stackup. The total radiated power (TRP) of the implemented filter is investigated and discussed. RF absorbing material and traditional shielding are considered to reduce the TRP.

In the second paper and third paper, new PCB-embedded common mode …

Pim Source Identification Using Vibration Modulation Method, Sen Yang

Masters Theses

“In Section 1, passive intermodulation (PIM) is introduced and the mechanism of it is briefly explained. Then, the up-to-date PIM testing and source identification method in the industrial and academia worlds will be summarized.

The vibration modulation method for PIM source identification is proposed in Section 2. Different vibration sources were tested and compared, and the test results showed that the vibration modulation method is able to identify PIM source with good accuracy.

Section 3 outlines a special PIM source identification system built based on the vibration modulation system. The two subsystems, PIM receiver and PIM vibrator, are illustrated in …

Avon Alkaline Igneous Province, Missouri: Characterization Of Subcontinental Mantle Source And Evolution Via Chemical Analysis Of Olivine, Zachary William Freeman

Masters Theses

"This article presents the crystallization age of, and composition of olivine phenocrysts within an alnoite of, the Avon Alkaline Igneous Province (AAIP) of Ste. Genevieve County, Missouri. The AAIP is an ultramafic igneous province consisting of approx. 80 known intrusives of diverse lithology and texture. ⁴⁰Ar/³⁹ Ar geochronology indicates an emplacement age of 386 +/- 1 Ma, which establishes the AAIP as the only known Devonian-age ultramafic igneous body in the Midwestern U.S. Study of the AAIP provides a unique opportunity to characterize the Devonian-age subcontinental mantle and the processes that generated the suite of ultramafic rocks present …

Design And Fabrication Of A System For The Additive Manufacturing Of Transparent Glass, Luke John Gilbert

Masters Theses

"Despite glass' prevalence in the scientific and engineering community, very little research has been conducted attempting to additively manufacture (AM) glass. Even less research has been done on optically transparent glass. Glass’ material properties make it ineligible for most AM processes if the end result is to be transparent. Even small gas inclusions can cause large amounts of scattering. Additively manufacturing transparent glass brings the advantages found in other AM processes with the added benefit of having optical properties better than those found in polymers. Additively manufacturing glass also allows the optical properties of transparent parts to vary arbitrarily. This …

Paleogeogra Detrital Zircon Geochronology Of Upper Cambrian To Lower Mississippian Siliciclastic Strata Of The Ozark Dome And Vicinity, Bing Li

Masters Theses

"Siliciclastic strata exposed in the Ozark Dome provide Late Cambrian to Late Cretaceous snapshots of an evolving paleogeology and regional to far-field tectonic events. U-Pb ages of detrital zircons from the arkosic base of the Upper Cambrian Lamotte Formation reflect first cycle derivation from the adjacent ca. 1.31-1.48 Ga Granite-Rhyolite province, with subsidiary input from ca. 1.6-1.7 Ga Mazatzal basement. Feldspathic arenites near the top of the Lamotte Sandstone also contain significant quantities of detrital zircon grains of these ages, with additional peaks centered at ca. 2.7 and ca. 1.1 Ga, signaling the onset of extra-regional detrital input most likely …

Pricing Of Geometric Asian Options In General Affine Stochastic Volatility Models, Johannes Ruppert

Masters Theses

"In this thesis, we look at the general affine pricing model introduced in [11]. This model allows to price geometric Asian options, which are of big interest due to their lower volatility in comparison to, for example, European options. Because of their structure and in order to be able to price these options, we look at the basic theory of Lévy processes and stochastic calculus. Furthermore, we provide the detailed description of the parameters of the pricing formulas for some popular specific single-factor stochastic volatility models with jumps and generalize the approach of [11] to multi-factor models"--Abstract, page iii.