Digital Commons Network^™

Characterization Of An Integrated Circuit With Respect To Electrostatic Discharge-Induced Soft Failures, Benjamin J. Orr

Doctoral Dissertations

"This research proposal presents a methodology whereby an integrated circuit (IC) can be characterized with respect to soft-failures induced by Electrostatic Discharge (ESD)-like events. This methodology uses an exclusively "black-box" approach to determine the response of an IC in a system-level environment, thereby allowing it to be implemented without intimate knowledge of the DUT IC. Results from this methodology can be referenced during system design to raise awareness of specific vulnerabilities of the core system ICs.

During work on this methodology, several sub topics have been explored and developed in the field of system-level ESD. Sections 2 and 3 introduce …

Efficient And Quantitative Emc Predictions (Emission And Immunity) For Ecu Modules, Guangyao Shen

Doctoral Dissertations

"This dissertation consists of three papers. In the first paper, a methodology of building an IC model capable of predicting failures for given disturbances at the clock input based on limited or no knowledge about IC internals was developed.

In the second paper, the maximized radiated emissions of the heat-sink/IC structure are predicted up to 40 GHz by creating an equivalent source using the measured electrical field in the gap between the heat-sink and ICs. The electric field is detected by an E-field probe made of an open coaxial cable coated with absorbing material. A numerical model is built in …

Functional Nanoporous Polyamide Aerogels, Malik Adnan Saeed

Doctoral Dissertations

"Aerogels are low-density materials consisting of 3D assemblies of nanoparticles with high open porosities and surface areas. Inspired by the extraordinary mechanical strength of polymer crosslinked aerogels, our recent attention is focused on inexpensive multifunctional isocyanates reacting with a variety of aromatic, organometallic and inorganic monomers. Three such systems discussed here are:

(A) Polymeric aerogels synthesized via a room temperature reaction of an aromatic triisocyanate with pyromellitic acid. Using solid-state CPMAS ¹³C and ¹⁵N NMR, it was found that the skeletal framework was a statistical co-polymer of polyamide, polyurea and polyimide. Stepwise pyrolytic decomposition followed by reactive etching …

Research On Hybrid Manufacturing Using Industrial Robot, Zhiyuan Wang

Doctoral Dissertations

"The applications of using industrial robots in hybrid manufacturing overcome many restrictions of the conventional manufacturing methods, such as small part building size, long building period, and limited material choices. However, some problems such as the uneven distribution of motion accuracy within robot working volume, the acceleration impact of robot under heavy external loads, few methods and facilities for increasing the efficiency of hybrid manufacturing process are still challenging. This dissertation aims to improve the applications of using industrial robot in hybrid manufacturing by addressing following three categories research issues. The first research issue proposed a novel concept view on …

Development Of Implants Composed Of Bioactive Materials For Bone Repair, Wei Xiao

Doctoral Dissertations

"The purpose of this Ph.D. research was to address the clinical need for synthetic bioactive materials to heal defects in non-loaded and loaded bone. Hollow hydroxyapatite (HA) microspheres created in a previous study were evaluated as a carrier for controlled release of bone morphogenetic protein-2 (BMP2) in bone regeneration. New bone formation in rat calvarial defects implanted with BMP2-loaded microspheres (43%) was significantly higher than microspheres without BMP2 (17%) at 6 weeks postimplantation. Then hollow HA microspheres with a carbonate-substituted composition were prepared to improve their resorption rate. Hollow HA microspheres with ~12 wt. % of carbonate showed significantly higher …

New Polyanion-Based Cathode Materials For Alkali-Ion Batteries, Hooman Yaghoobnejad Asl

Doctoral Dissertations

"A number of new materials have been discovered through exploratory synthesis with the aim to be studied as the positive electrode (cathode) in Li-ion and Na-ion batteries. The focus has been set on the ease of synthesis, cost and availability of active ingredients in the battery, and decent cycle-life performance through a combination of iron and several polyanionic ligands. An emphasis has been placed also on phosphite (HPO₃^2-) as a polyanionic ligand, mainly due to the fact that it has not been studied seriously before as a polyanion for cathode materials. The concept of mixed polyanions, for …

Transient Cfd Simulations Of Pumping And Mixing Using Electromagnetic, Fangping Yuan

Doctoral Dissertations

"In this dissertation, two dimensional and three dimensional, transient CFD simulations are conducted to investigate the active pumping and mixing in microfluidics driven by Electromagnetic/Lorentz force. Shallow disk/ring cylindrical microfluidic cell and shallow cuboid microfluidic cell with electrodes deposited on the bottom surface are modelled for mixing and pumping purposes respectively. By applying voltage across specific pair of electrodes, an ionic current is established in the weak conductive liquid present in the cell. The current interacts with an externally applied magnetic field generating a Lorentz force that causes fluid motion in the cell. Velocity vectors, electric potential distributions and ionic …

Efficient Time-Dependent System Reliability Analysis, Zhifu Zhu

Doctoral Dissertations

"Engineering systems are usually subjected to time-variant loads and operate under time-dependent uncertainty; system performances are therefore time-dependent. Accurate and efficient estimate of system reliability is crucial for decision makings on system design, lifetime cost estimate, maintenance strategy, etc. Although significant progresses have been made in time-independent reliability analysis for components and systems, time-dependent system reliability methodologies are still limited. This dissertation is motivated by the need of accurate and effective reliability prediction for engineering systems under time-dependent uncertainty. Based on the classic First and Second Order Reliability Method (FORM and SORM), a system reliability method is developed for multidisciplinary …

Identifying Shallow Subsurface Stratigraphy And Voids Using Dispersive Characteristics Of Electromagnetic And Surface Waves, Payman Hajiani

Doctoral Dissertations

"This dissertation presents the results of three manuscripts on spectral analysis of electromagnetic and seismic surface waves to detect subsurface stratigraphy and voids. In the first manuscript, a new technique was developed by utilizing spectral analysis of surface waves to detect subsurface openings. This technique applied the concept of group delay to evaluate the effects of subsurface voids on the phase shift domain. Seismic data sets were acquired at different sites where the shape, size, and depth of the void varied. In all surveys, the time delay technique precisely identified the locations of the subsurface openings. The second manuscript presents …

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …

Thresholding Techniques For Discrimination Of Seborrheic Keratosis From Melanoma In Dermoscopy Images, Pramada Kishtagari

Masters Theses

“Malignant melanoma is a very deadly form of skin cancer which has claimed many lives over the past few years. If detected early this can be cured, hence early detection of malignant melanoma is essential. Unfortunately melanoma is mimicked by seborrheic keratosis, a benign skin cancer. Identifying malignant melanoma as seborrheic keratosis using clinical diagnosis can prove fatal to the patient. To prevent such errors, dermoscopy, a common non-invasive skin imaging technique, is used which improves the diagnosis of these pigmented lesions by visualizing the morphological structures. This study proposes an automatic method by applying image processing techniques to aid …

Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang

Masters Theses

”This work presents the evaluations of two products. One can be used for hydraulic fracturing to achieve viscosity stable under high shear rate, and the other is potential to be applied to enhance oil recovery from mature oilfield.

The first experiment is to synthesize and evaluate a new polymeric fracturing fluid that can resist high shear rate of 511^-1 with favorable viscosity. Zirconium crosslinked fracturing fluids are lack of self-healing ability after shearing, and the difficulties still exist in maintaining viscous with lower polymer content exposed to high shearing conditions, therefore, the research is trying to develop a new …

Gravity And Magnetic Investigations Of The North-Eastern Kansas Section Of The Midcontinent Rift System, Ozgun Kamil Sahin

Masters Theses

"The Midcontinent Rift System (MRS) is a major Precambrian magmatic province on the North American continent. It formed when the North American craton began to split apart during the Mesoproterozoic era (1,100 Ma). As a result of the extension and possibly the effects of a rising mantle plume, a thick layer of basalt and numerous reverse and normal faults were formed. The basalt layer is buried below sedimentary formations and makes it difficult for seismic techniques to image. On the other hand, gravity and magnetic methods can be utilized for focused depths, and the basalt layer of the system can …

Factors Influencing The Adoption Of Smart Wearable Devices, Apurva Adapa

Masters Theses

"This study aims to examine the factors and issues in adoption of smart wearable devices. Wearable devices have many functions to offer which make them very useful in our daily lives. However, factors influencing the adoption of these devices are not well understood. This research explores the inhibiting and contributing factors influencing the adoption of wearable devices by employing the laddering approach. Qualitative data were collected through in-depth interviews using the laddering technique in order to understand these factors. Wearable devices that were examined include the Smart Glass (Google Glass) and the Smart Watch (Sony Smart Watch 3). After the …

Aspen Simulation Of Oil Shale And Biomass Process, Anand Alembath

Masters Theses

"This thesis focuses on design and analysis of two major chemical processes using computer simulation which performs a steady state computation. The objective is to design processes using Aspen simulation to establish optimum operating conditions by performing various simulation runs which are challenging to execute at lab scale.

Increasing energy needs and decline of global oil prices has shifted our focus on commercially developing unconventional and renewable resources. Commercialization of any process relies on developing a process model that identifies different process parameters by performing a steady state mass and heat balance. Aspen simulation is considered an effective process modeling …

Laser Sintering And Aerosol Printing Of Conductive Nanoparticles, Mahati Guntupalli

Masters Theses

"Fabrication and printing of nanoparticles is an essential step in the manufacturing of low cost- high efficiency electronic devices. High material costs of noble metal particles necessitates the investigation for a potential substituent. Conventional methods of manufacturing are time consuming and uneconomical, thus intense research is being done to employ new methods for cost, time and space effective manufacturing process.

The first part of the thesis presents the fabrication of Copper nanoparticles. As an economical substituent for noble metal nanoparticles, Copper nanoparticles satisfy various properties as conductive inks, simultaneously suffering from the vital problem of oxidation. The acceleration effects of …

Synthesis And Photonic Sintering Of Bioresorbable Zinc Nanoparticle Ink For Transient Electronics Manufacturing, Bikram K. Mahajan

Masters Theses

"Zinc is an essential 'trace element' that supports immune systems, and is required for DNA synthesis, cell division, and protein synthesis. Zinc nanoparticles (Zn NP) has antibacterial properties and potential to be used in biodegradable printed electronics devices. The research presented here is about the synthesis of Zn NP and their potential use in transient electronics devices. In Paper 1, a technique of room temperature synthesis of Zn NP is reported using ball milling. Controlled amount of PVP was mixed in the solvent to stabilize the Zn particles and minimize cold welding during milling. The size of the produced Zn …

Shear Behavior Of Reinforced Fly Ash-Based Geopolymer Concrete, Noor S. Yacob

Masters Theses

"The geopolymerisation of aluminosilicate materials such as fly ash has been a radical change in construction material's chemistry and composition, compared to the portland cement-based concrete calcium silicate-hydrate chemistry. The adoption of fly ash in concrete industry is a good use of by-product ashes to reduce emissions of the greenhouse gas implicitly. However, in this research, the replacement of portland cement by fly ash is 100%, which makes it a zero-cement concrete with no proprietary chemical additives.

Geopolymer concrete (GC) is a revolutionary synthetic material that combines sustainability and high engineering properties, and it is relatively cost-effective compared to portland …

Biodegradable Electronic And Optical Devices Toward Temporary Implants, Md Shihab Adnan

Masters Theses

"Implantable biomedical devices have a high potential to revolutionize health care technologies in near future. Implantable devices can be classified as permanent prosthetic devices such as pacemakers or nerve stimulants and temporary devices for intermediate monitoring and control scenario which are still in research phase. In contrast to permanent device, temporary implants lose functionality and become unnecessary after intended operational lifetime which may pose serious electromagnetic and biomedical safety concern, latent complications at the implanted sites and possible ethical issues if not removed from body by an additional surgical operation.

The first paper of this thesis focuses on exploring the …

Material Properties Characterization For Multilayer Pcb And Peec Macromodels For Above Plane Decoupling Capacitors, Xiang Fang

Masters Theses

"Accurate frequency-dependent dielectric properties are important for accurate modelling of signal and power integrity problems. And decoupling capacitors perform an important function in the impedance reduction of power distribution systems. Hence, precise dielectric properties and micromodels for decoupling capacitors are the key parts for the signal and power integrity design.

In Section 1, the existing method for extracting dielectric properties from fabricated multilayer printed circuit boards based on the measured electrical property of fabricated transmission lines is introduced and validated using simulations. And the potential errors in the procedure are discussed. After that Djordjevic-Sarkar causal dielectric model for dielectric properties …

Caseload/Workload Study Of Speech Language Pathologists In Missouri Public Schools, Jinyu Du

Masters Theses

"A survey was distributed to speech-language pathologists (SLPs) in Missouri public schools to obtain statewide information regarding caseload number, workload related activities and SLPs' level job satisfaction on various aspects of their job. An online questionnaire was sent to school-based SLPs in Missouri to solicit factual information on average monthly caseload numbers, factors that impact caseload assignments and the percentage of time spent on various professional responsibilities and job satisfaction ratings. Results indicated that 24% of the respondents had caseloads that exceeded the maximum state regulated caseload number for SLPs. Respondents were also largely unaware of the maximum caseload regulation …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

Particle Mediated Enhanced Mass Transfer Of Diethylhexyl Phthalate: A Pilot Scale System Design, Melissa Buechlein

Masters Theses

"Phthalates are a class of SVOCs that are widely used as plasticizers and recently epidemiological and toxicological research has found a link between phthalate exposure and increased occurrences of adverse health effects. SVOCs can potentially partition into household dust and airborne particles. Models and micro chamber studies have identified that airborne particles effectively increase SVOC deposition to or emissions from surfaces; SVOCs partition to aerosols in the bulk air, the aerosols then migrate to the surfaces due to eddy and Brownian motion, and then the SVOCs is released inside the SVOC concentration boundary layer adjacent to the surface. Concentration boundary …

Iron Phosphide Nanostructures As An Efficient Bifunctional Catalysts For Water Splitting, Nikitaa Ashokan

Masters Theses

"The first part of this thesis work focuses on developing a bifunctional catalyst for electrochemical water splitting encompassing both oxygen and hydrogen evolution. A highly efficient catalyst is necessary to improve kinetics of the sluggish four electron process for oxygen evolution reaction (OER) and two-electron process for hydrogen evolution reaction (HER). Recently, transition metal phosphides have gained increasing interest in this field because of their good electrical conductivity properties as well as better catalytic activity. Many transition-metal phosphides are being considered for this application and iron phosphide (FeP) has proved to be a good HER catalyst. In this work, we …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …

2d Seismic Data And Gas Chimney Interpretation In The South Taranaki Graben, New Zealand, Taqi Talib Alzaki

Masters Theses

"The Taranaki Basin is one of the major oil and gas producing basins offshore New Zealand. The study area covers an area of 10,000 km² in the basin, and includes 171 2D seismic lines and six wells, which are provided by the New Zealand Petroleum & Minerals. Some previous studies refer to the study area as the South Taranaki Graben.

This thesis provides detailed mapping and interpreted subsurface stratigraphy and structure of five horizons, i.e. basement top, Pakawau Group top, Kapuni Group top, Wai-iti Group top, and seafloor. It undertakes studies of the relation between the basin evolution, faults, …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Silicone Hollow Fiber Membrane Bioreactors For Mixed Aerobic And Anaerobic Treatment Of Gas Phase Toluene And Trichloroethylene, Alexander Lee Korff

Masters Theses

"Volatile Organic Compounds (VOCs) are common in effluent waste streams from many sectors of industry and low-cost emission control technologies have the potential to mitigate long-term impacts on the environment. Federal Regulations, such as the Clean Air Act and National Emission Standards for Hazardous Air Pollutants (NESHAPS), as well as state regulations are imposing stricter requirements on point-source emissions, with an emphasis on toxic VOCs. Trichloroethylene (TCE) and tetrachloroethylene (PCE), which are toxic VOCs, have been used since the 1920's for a variety of industrial applications like: degreasing, paint and printing operations, as extraction solvents, and for cleaning and drying …

The Impact Of Heat Exchanging Internals On Hydrodynamics Of Bubble Column Reactor, Ahmed Jasim

Masters Theses

"In this study, the impact of configuration and size of vertical heat exchanging internals in bubble columns on gas holdup, specific gas-liquid interfacial area, bubble chord length, and bubble rise velocity were investigated. Three different configurations of internals, each covering 25% of the column's cross-sectional area, were used to simulate the heat exchanging tubes utilized in the F-T process. The First configuration is a circular-like arrangement of 0.5 inch diameter vertical rods, whereas the second is a hexagonal-like arrangement of 0.5 inch diameter vertical rods. The third configuration is also a circular arrangement but of 1 inch diameter vertical rods …

An Imu-Based Spacecraft Navigation Architecture Using A Robust Multi-Sensor Fault Detection Scheme, Samuel J. Haberberger

Masters Theses

"Redundant sensor networks of inertial measurement units (IMUs) provide inherent robustness and redundancy to a navigation solution obtained by dead reckoning the fused accelerations and angular velocities sensed by the IMU. However, IMUs have been known to experience faults risking catastrophic mission failure creating large financial setbacks and an increased risk of human safety. Different fusion methods are analyzed for a multi-sensor network using cost effective IMUs, including direct averaging and covariance intersection. Simulations of a spacecraft in low Earth orbit are used to baseline a typical expensive IMU and compare the navigation solution obtained from a network of several …