Digital Commons Network^™

Comparative Study Of The Collecting Property Of Naphthenic Acids With Oleic Acid As Applied To Calcite, Hematite, Barite, And Fluorspar, Siddhi Nath Mukherji

Masters Theses

"The present investigation was undertaken to find out any comparable collecting property of some of the industrial naphthenic acids available in the market with that of commercial grade of oleic acid so that some information may be available in selecting naphthenic acids as flotation collectors. In the flotation industry, usefulness of oleic acid as non-metallic minerals collector is well established. On the other hand, the use of naphthenic acids as flotation collector has been reported only in few cases. Even in those cases, no attempt has been made to correlate their collecting properties with that of their physical and chemical …

The Investigation Of Color Modification As A Result Of Solid Solution, Bobby Lee Mornin

Masters Theses

"To the ceramic industry, color has long been one of its chief problems, not only in reproducing colors in the many complex silicate structures but in the development of stains that are stable at high temperatures and that are economically feasible for mass production. At the present time a stable high temperature red or yellow would be very desirable. Solid solution has been employed in ceramics to modify and thereby provide ceramic materials of different physical characteristics. The limited data available with respect to such solid solution serves to indicate that perhaps this state may serve as an important means …

A Study Of The Power Consumption Of Mine Scrapers, Stanley Francis Johnsen

Masters Theses

"Since scrapers were first employed in underground mining work, numerous changes in scraper design have transpired until now there are several common types of scrapers in use in mines over the world. The proved models of scrapers have been developed over a period of more than fifty years. Although specific scrapers have been tested to determine the amount of power consumed, no literature could be found concerning the relative power consumption of the different types of scrapers when operated under identical conditions. Purpose of Problem - The purpose of this study is to determine the relative efficiency of different types …

Interrelationship Of Transverse Anchorage And Adhesive Bond In Welded Wire Reinforcement, Alan Arthur Becker

Masters Theses

"...Welded Wire Reinforcement Fabric has been applied only to certain "light types" of reinforced concrete construction. It has not as yet been applied as main tension reinforcement for most concrete structures, mainly due to the fact that a thorough investigation of the potentialities and possibilities of welded wire fabric has not as yet been conducted. It is expected that the data collected in this investigation coupled with data collected in similar investigations performed at the Missouri School of Mines and Metallurgy will furnish the basis for a structural and economic comparison between welded wire fabric and ordinary reinforcing bars. The …

Aerodynamic Research For An Improved Rotor Control System On Helicopters, Delmar Wallace Breuer

Masters Theses

"Since the author has always been interested in Aeronautical Engineering, and in particular, rotary-winged-aircraft, the problem of research for aerodynamic improvement of rotary-wing control systems was chosen. This problem was suggested by the Army Aircorps Officials of Wright-Patterson Field of Dayton, Ohio as being a valuable and practical problem for the government. It is also valuable and practical for the author since it follows his general course of undergraduate study and since it fits closely into the field for which he is preparing himself...The requirement with which the author is most concerned is the design system for the producing of …

A Graphic Method For Determining Pressure Losses Due To Air Friction In Mine Airways, Robert F. Bruzewski

Masters Theses

"One of the most important factors that influence the selection of a fan or blower for circulating a desired quantity of air through mine workings is the total pressure that is required to overcome the resistance of the airways. Ordinarily, the major portion of this resistance is that caused by friction of the moving air on the surface of the airways. The pressure that is required to overcome this frictional resistance is calculated by means of the friction formula"--Introduction, page 1.

Analytical Investigation Of Thin And Moderately Thick-Walled Tubing Under Peripheral And Biaxial Loading, Frank Joseph Cizek

Masters Theses

"The problem then, resolves itself into a study of the behavior of thin-walled and moderately thick-walled cylinders under the effects of an external fluid pressure acting alone, or the effects of an external fluid pressure acting simultaneously with an axial loading. In this thesis a theoretical or analytical approach will be used. Some application and reference will be made to oil-well casings in particular, but the solutions will not be restricted to oil-well casing alone. it must be recognized that the tubing problem involves the problem of unstability before the proportional limit of the metal is exceeded and a similar …

An Investigation Of The Weavability Of Wire With Observations On The Defects Of Wire And Wire Cloth, Walston Chubb

Masters Theses

"In the course of this year's work under the auspices of the Ludlow-Saylor research fellowship many problems of interest to the wire weaving industry have been investigated. Some of these problems have no academic novelty; others were not completed and have been laid aside for future investigations. The major problem for investigation this year was to discover a method by which the weavability of wire might be evaluated. A second problem for investigation was to discover the causes of some of the defects of wire and wire cloth. In addition to presenting the results of these investigations, this thesis represents …

The Barite Industry In The United States, James Byron Chaney

Masters Theses

"Within the past few years, barite has become one of the most important non-metallic substance mined in the United States, as expressed by the large increase in production since 1943. The purpose of this treatise is to combine in a single volume important information concerning the geographical distribution, geology, mining methods, milling or beneficiation methods, production and utilization of barite in the United States. A large number of references has been used in preparing this treatment. The information has, as far as possible, been brought up-to-date. It is thought by the writer that the paper will present to the reader …

Further Studies - Heat Transfer Coefficients For Liquids In Forced Convection Normal To Banks Of Staggered Tubes, Terrell C. Claunch

Masters Theses

"The problem for these experiments may be divided into two sections. The first section of the problem consists of setting up procedure for duplicating data. The second section is that of studying and explaining characteristics of the resulting curves. Correlation of the data obtained will be necessary in order to obtain the curves. In order that the first section of the problem could be solved it was necessary to establish a standard of cleanliness for the apparatus used. Establishment of procedures for the operations and cleaning of the apparatus was necessary. Before Kenneth E. Rudert began his design and construction …

Effect Of Transition Elements On The Transmittance Of B₂O₃ Glasses, Chandubhai Gordhanbhai Amin

Masters Theses

"For many years, boric oxide has been used extensively as a minor constituents in silicate glasses, because of its beneficial influence on their physical properties as well as on glass melting processes; but when used without silica or in too large proportion, the resulting glasses lack chemical durability...Because of its detrimental effect as a major constituent in silicate glasses or in borate glasses, very little work has been done on borate glasses, especially on colored borate glasses...The purpose of this investigation is to find out the effect of the transition elements on the transmission curves of the colored borate glasses"--Introduction, …

Preparation Of Copper Single Crystals By Means Of Powder Metallurgy Methods, Wei-Kung Chang

Masters Theses

"Since different mechanical properties of metals result from different grain size became known, the metallurgists have been interested in finding out the true nature of the grain boundaries. Consequently, several different theories concerning the mechanism of recrystallization, grain growth, and the structure of metals were advanced and studied. These threw much light on the difference of properties between polycrystalline metals and single crystals of the same metals. The single crystals of metals were studied because they enabled the investigator to determine the important points of metallic behavior. The first work on single crystals was rather obscure and limited to isolated, …

A Correlation Of Formulas For The Flow Of Fluids In Pipes, John Gorman Duba

Masters Theses

"At present there exist two quite distinct fields in fluid flow in pipes, the one in water supply and the other in the petroleum industry. It is the purpose of this paper to discuss the various pipeline flow formulas as used in both fields and to correlate the exponential type formula which is much used in practice with the Nikuradse curves obtained in the laboratory"--A Brief Historical Review, page 5.

Evaluation Of Quenching Media Using The End-Quench Hardenability Test, Subodh C. Das Gupta

Masters Theses

"The purpose of the thesis was to evaluate the quenching speed of different quenching media by studying their behaviour in relation to hardenabilities of steels, using the standard A.S.T.M. End-quench Test. At the outset an understanding of the term "Hardenability", so extensively used in industrial heat-treatment, is necessary, The property of a steel, of hardening on quenching to various depths beneath the surface is referred to as the 'Hardenability". It may simply be called the "susceptibility to hardening". Hardenability should be distinguished from the "Hardening capacity", which represents the magnitude of the hardness achieved. The chief factors which affect the …

The Theory Of Limit Design As Applied To The Design Of A Continuous Beam Over Three Supports, Robert F. Davidson

Masters Theses

"The theory of Limit Design is the application of the theory of Plasticity to the estimation of the actual carrying capacity of a structure. In this theory, as it is applied to statistically indeterminate structures, the areas of most unfavorable stress are allowed to be stressed beyond the yield point and into the plastic range of stress. It was formerly held that, by assuming elastic behavior, all questions of strength of materials that concern the Structural Engineer were capable of solution. However, it is now becoming recognized, from actual measurements of deformations of structures and from tests carried to near …

An Investigation Of The Production Of Multicarbide Of Tungsten And Titanium From Wo₃ - Tih₂ - C Mixtures, Chi-Mei Hsiao

Masters Theses

"The purpose of this research was to investigate the possibility of producing the multicarbides of tungsten and titanium from a tungsten oxide-titanium hydride-carbon mixture. It appears to be worthwhile to carry out the reduction, carburization, and pre-alloying in one process, i.e. reducing tungsten oxide with the dissociated hydrogen from titanium hydride and the added carbon; then carburizing the reduced tungsten metal and dissociated titanium metal; at last, pre-alloying the mixture of TiC and WC. The replacement of titanium hydride with titanium oxide seems to be more direct, simple, and economical process; but the difficulty in the reduction of titanium oxide …

Reduction Of Zinc Sulphide In A Vacuum, Tien-Shih Liu

Masters Theses

"The successful large scale commercial application of high vacuum for high temperature metallurgical operations is a comparatively new development. The use of Pidgeon and the carbothermic processes for the production of magnesium during the war forced a perfection of both equipments and techniques for high vacuum operations. This opens broadly the way for a great expansion of vacuum metallurgy. Vacuum operation is thus no more a laboratory method - it is a kind of industrial practice. Many metallurgical operations, which cannot be carried out by ordinary processes, are made feasible when conducted in a reduced pressure. typical examples are the …

Design Of A Barge-Platform Marine Drilling Rig, Ely Schwartz

Masters Theses

"ln the quest for oil in the Gulf of Mexico, princi­pally off the coasts of Texas and Louisiana, unique types of drilling rigs able to cope with environmental conditions have been developed in the last several years. This development is highly specialized and has led to methods of operation revolutionary to the oil industry and is without precedent….

In designing a drilling platform there are three cardinal aims (1) low cost installation and operation, (2) ease of operation, (3) providing safe working condi­tions.

The initial problem is to extend the shore-based fabrication and reduce the offshore construction, foul weather delays, …

The Missouri Miner, December 17, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, December 10, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, December 03, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 19, 1948

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, November-December 1948, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Missouri Miner, November 12, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 05, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 29, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 22, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 15, 1948

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 08, 1948

The Missouri Miner Newspaper

No abstract provided.

Tests On Cold Formed Steel Studs For The American Iron And Steel Institute, American Iron And Steel Institute

CCFSS Library (1939 - present)

1. SCOPE OF THIS REPORT. In connection with a prospective revised Second Edition of the Specifications the question has been raised as to the reliability of Section 3.7, Combined Axial and Bending Stress. This stipulation at the time wa.s adopted from the AISC Specifications without detailed investigation. It appeared pertinent, therefore, to subject this requirement to a detailed analysis for purposes of verification and possible improvement. The present Report gives an abbreviated account of this analysis and presents numerical and graphical data sufficient to judge the reliability of Section 3.7.