Digital Commons Network^™

Methods To Improve The Metallurgy Of Bolivian Tin Ores, Oscar Davila-Michel

Masters Theses

"Tin is a rare element; among the base metals it is one of the rarest. Although it was one of the first metals used by man and has been used since prehistoric time, the ore-dressing and metallurgical methods of tin are inefficient and very wasteful.

The only tin deposits of importance in the Americas are located in Bolivia, South America, and it is in Bolivia that the problems of tin metallurgy are greatest. More than 50% of the tin that is mined in Bolivia is lost in the tailing dumps of the beneficiation plants. In a country where the export …

A Study Of Background In A Long Sensitive Time Wilson Cloud Chamber, Donald A. Rinker

Masters Theses

"A long-sensitive time Wilson Cloud Chamber has been built and tested. A usable sensitive time of 2.5 seconds has been achieved by the use of a system of five expansion valves, the first three of which are used to obtain the sensitive time and the final two to continue the expansion at a supersaturation slightly less than critical in order to allow all droplets formed to grow in size and fall into the liquid. This system of continued expansion, coupled with delayed recompression, has been proved to reduce the background density in the chamber to an average operating value of …

Paragenesis Of The Minerals In The Einstein Vein Madison County, Missouri, Robert P. Stevens

Masters Theses

"Selection of the Problem: The mineralogical problem of determining the paragenetic sequence of minerals in the Einstein vein, Madison County, Missouri, was suggested by Dr. O. R. Grawe, who previously had supervised a thesis by Joel Pomerene dealing with the geology of the area. Although considerable attention has been given to the mineralization along the vein, a specific study of the paragenetic relations has not been made. Paragenesis has, however, been discussed by others in papers dealing with the geology of the area. Such a study is extremely important in the establishment of a hypothesis of origin, and hence, an …

Iterative Solutions Of Kirkwood's Integral For Liquid Argon, Eugene D. Fabricius

Masters Theses

"A liquid or a dense gas may be regarded either as a very imperfect gas in which multiple collisions are frequent or as a distorted crystal in which the long range order has been lost. The crystal-like approach has not led to formal solutions, but it has led to several approximate treatments which can be used to give numerical results.

The two main types of approaches which have been used are: the cell theories, in which the liquid is regarded as a distorted crystal with one molecule located at or near each lattice point; and the hole theories, in which …

Design Of Distillation Solvent Recovery System, Donald Empson Puyear

Masters Theses

"With the advent or the atomic bomb during the summer of 1945 the opportunity for engineering colleges to provide an integrated course of study in the field of nuclear engineering was presented. This opportunity has been greatly enhanced by a policy of the Atomic Energy commission, granting funds to selected institutions for equipment necessary for successful instruction in this field. The Missouri School of Mines and Metallurgy, realizing the opportunity presented, has established a course of study in nuclear engineering in which the departments of Ceramic, Chemical, Mechanical and Metallurgical Engineering and Physics are taking an active part.

That portion …

An Improved Long Sensitive Time Wilson Cloud Chamber, Clarence W. Mettenburg

Masters Theses

"The discovery of numerous new particles in recent years such as mesons and hyperons causes one to speculate about the possible existence of still other particle types….

A cloud chamber seems to be a most suitable means of detecting particles ionizing less than the minimum ionization of the electron because it is capable of detecting almost all the ions produced. The cloud chamber makes it possible to study not only a wide range of ionization but also many fine details of track structure which would go unnoticed by other means of detection….

With the information and experience gained by the …

Permeability Study Of Algal Reef Beds Within The Bonneterre Formation, National Mine, St. Francois, Missouri, Bobbie L. Perry

Masters Theses

"The Missouri "Lead Belt" comprises approximately 50 square miles, centering around the town of Flat River, in St. Francois County. Missouri. This district has been producing lead for more than 200 years, the total production being at least 8,000,000 tons of lead, valued at more than $1,000,000,000. For many years, the annual production of the district has been at least one-fourth of the total production in the United States.

An excellent description of the geology of this area was published recently by Ohle and Brown in 1954.

The ore consists principally of galena which is disseminated within the Bonneterre formation …

Analysis Of Mining Mechanization In The Fluorspar Mine, Southern Illinois, Marangin Simatupang

Masters Theses

"The purpose of this study is to analyze the underground mechanization in the fluorspar mines in Southern Illinois. The mining mechanization in this district is confronted with manifold problems which are typical of most small or medium size mines.

The ore reserve in each mine is not very large. The method of development had to be planned accordingly such as not to exceed the depreciative capacity of the deposit.

The ore bodies consist of thin bedded layers or small veins. This thickness controls the sizes of the equipment to be used.

The mining operations always lack skilled equipment operators. In …

Design Of Liquid-Liquid Extraction System, Mehdi Rahmani Fard

Masters Theses

"The unit operation of liquid-liquid extraction has developed enormously in the last 20 years and is now recognized as one of the most important techniques for the physical separation and refining of industrial liquids. For years the conventional apparatus used for liquid-liquid extraction has been towers employing countercurrent flow of the liquids and equipped with various means to increase the interfacial area.

The countercurrent column consists of a tower through which flows a continuous phase while countercurrent to this flow is a stream of droplets (the dispersed phase). Provision is made for dispersing one phase with a settling region at …

Rheological Measurement Of A Starch Suspension As A Dilatant Fluid, Earl Edward Pape

Masters Theses

"The measurement of the rheological properties, consistency of viscosity and fluid type, necessary for system design calculations, has fallen behind the industrial applications for non-Newtonian fluids. In the petroleum industry in particular, the process of well flow stimulation known as Hydraulic Fracturing utilizes the properties of various non-Newtonian fluids to carry sand at high flow rates to the formation to be fractured. Other non-Newtonian fluids in the petroleum industry are Bentonite clay drilling fluids, whose unique gelling properties are helpful in suspending drill cuttings when the circulation of the fluid has ceased. In Newtonian liquids and gases the consistency is …

Spilitic Rocks And Mineral Deposits, G. C. Amstutz

Missouri School of Mines and Metallurgy Bulletins

The principal results of research work on spilitic rocks and mineral deposits carried on since 1945 are briefly summarized. Emphasis is placed on the influence of the results on the theories of rock and ore genesis, particularly the change of "philosophy of exploration" based on the existence of hydro magmatic ore deposition. A re-classification of magmatic mineral deposits is offered.

Performance Characteristics Of A Tubular Regenerative Heat Exchanger, Harry J. Sauer Jr.

Masters Theses

"The term regenerator is widely used to define any type of heat exchanger in which the heat is alternately stored and removed...The present investigation is concerned with the calculation of the characteristics of the "single-blow", tubular regenerative heater, its dimensions and performance. In the analysis in this thesis, the heat is considered to be stored in bundles of tubes initially preheated by hot gases flowing through the heater and subsequently cooled by the flow of air. This paper makes no attempt to deal with the effects of radiation from the outer row of tubes to the heater shell"--Introduction, page 1-3.

Effect Of Gamma Radiation On Selected Organic Protective Coatings, James W. Johnson

Masters Theses

"The purpose of this investigation was to prepare pigmented and non-pigmented organic protective coatings and to irradiate them with gamma rays. The coatings received a constant radiation dose of eight million rads. Seven tests were performed on the various coatings. The data from the tests were tabulated so that a direct comparison could be made as to the effect of the radiation on the coatings. The data from the tests also enabled comparisons to be made to determine if the various pigments had imparted any specific properties that would be desirable in coatings being exposed to radiations"--Introduction, page 2.

The Use Of Chelating Agents In Inorganic Analysis, Richard K. Vitek

Masters Theses

"The objectives of this investigation were; (1) to improve the existing gravimetric method of analysis for palladium with dimethylglyoxime by adding EDTA to the solution to chelate interfering metal ions: (2) to develop a new and better gravimetric method of analyses for palladium with a different organic ligand and employing a chelating agent such as EDTA or NTA to remove the interference of foreign ions"--Introduction, page 2.

Investigation Of The Geometric Effects Connected With The U-Effect-Iii, Anthony Edward Hoffman

Masters Theses

"Statement of Problem: The investigation reported herein is of the dependence of the voltage output due to the U-Effect-III upon the geometry of the tube. The geometry of the tube is defined to include the inner diameter of the tube as well as the size and number of the mercury and electrolyte drops. The previous experimental study of the effect did not include an investigation of the effects of the geometry of the tube, as defined above, on the voltage output. It seems that information as to the dependence of the output voltage on the geometry of the tube would …

A Preliminary Investigation Of Strains And Fracturing In Small Hydro-Stone Beams Due To Impact Loading, Niels B. Haubold

Masters Theses

"Every structure has a fundamental frequency which is sometimes referred to as its first natural frequency. If a periodic force acts on the structure whose frequency is equal to that of the natural frequency of the structure, a vibration is set up whose amplitude would approach infinity if it were not for the presence of damping. Since damping is always present, steady state conditions will finally be reached provided that the applied force is not so great that it will cause the structure to fail. The amplitude of the vibration will be a function of the applied force and the …

Frost Formation And Its Influence Upon Heat Transfer, Jack Lewis Loper

Masters Theses

"The cooling of a gas-vapor mixture or a mixture of several vapors, in the general case, results in condensation (phase-change) of one or more of the vapors when their respective dew-points are reached. This results in a mass transfer of the vapor to the cooling surface accompanied by energy transfer as the vapor gives up its latent heat of vaporization to the surface and becomes a liquid. The liquid accumulation adds a resistance to the further transfer of mass and energy unless some means is provided for its removal from the surface, such as gravity action.

In this paper we …

Transients And Saturation In Synchronous Machines, Sabi J. Asseo

Masters Theses

"The synchronous machine can be regarded as the most important electrical device in today's industry and civilization. Although many improvements in the development of powerful electronic devices have been made, in recent years, the importance of the electrical power engineering field can never be overlooked in any way.

Most of electrical power engineering problems have been studied in the first quarter of the present century, and the results applied to industry for the betterment of electrical power production. As distribution and transmission systems used become extensively large, new problems such as the stability of interconnected power systems, have been introduced. …

Reconstruction Of A Model L Podbielniak Fractional Distillation Apparatus, Raymond Bauer

Masters Theses

"The purpose of this thesis was to reconstruct a Model L Podbielniak Fractional Distillation Apparatus to provide equipment suitable for the study of batch multicomponent distillation. The apparatus will also serve as an analytical instrument. The equipment was instrumented to automatically control the distillation, but an operator is needed to select fractions and insure the proper functioning of the controls.

Samples of hydrocarbon mixtures of known composition were analyzed to prove the successful operation of the reconstructed apparatus"--Introduction, pages 2-3.

Effect Of Hydrated Lime And Portland Cement On The Physical Properties Of Clay Soil For Highway Base Construction, Judson Leong

Masters Theses

"The intent of this research is to determine the change in physical properties of a clay soil caused by the addition of 2, 4, 6, 8 and 10 percent of hydrated lime and portland cement. The effects of these admixtures on the physical properties of the soil were observed by comparing the results of various laboratory tests. The properties chosen for comparison were: (1) liquid limit, plastic limit and plasticity index; (2) shrinkage limit and shrinkage ratio; (3) density and optimum moisture; (4) resistance to penetration; (5) compressive strength and (6) cohesion and angle of internal friction. In order to …

Surface Temperature Measurement Of Metal Undergoing Induction Heating, Ding-Yee Nee

Masters Theses

"It is the object of this thesis to investigate the possibility of using thermoelectric pyrometry for surface temperature measurement of metal undergoing induction heating. The temperature range under investigation, as stated before, is 400 °F to 1250 °F. This research may actually be treated by two sections.

The first section concerns the methods of using thermocouples for ordinary surface temperature measurements. The second section concerns the effect, if any, on thermocouple e.m.f. readings while it is measuring the surface temperature of a metal undergoing induction heating. The first section of the investigation has been well covered by literature and will …

An Application Of Cathodic Sputtering To The Etching Of Metallographic Specimens, Robert Ruch

Masters Theses

"The U. S. Bureau of Mines at Rolla, Missouri has for some years been conducting research on manganese-copper alloys. The study of the physical metallurgy of these alloys -- dissimilar metal couples -- has always been complicated by the difficulty of satisfactorily etching this material. It was felt that by introducing a new etching technique, cathodic bombardment, satisfactory etching might be accomplished. On this basis the following research program was proposed:

1) To survey the present state of art of cathodic etching, etching by means of cathodic sputtering;

2) To design and construct suitable equipment for the experimental study of …

A Statistical Approach To The Zonation Of A Petroleum Reservoir, Leroy Allan Beghtol

Masters Theses

"The problem of dividing a reservoir into distinct permeability zones, in order to predict fluid flow and thereby the production history of the field, has long troubled the petroleum engineer. As a solution to this problem a new statistical method for zoning a reservoir was developed, using a modification of the analysis of variance technique. The application of the statistical zonation procedure to permeability data obtained from eight closely spaced wells substantiated the validity and effectiveness of the new method in determining distinct permeability zones"--Abstract, page iii.

The Missouri Miner, December 20, 1957

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, December 13, 1957

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, December 06, 1957

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 22, 1957

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 15, 1957

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, November-December 1957, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Missouri Miner, November 08, 1957

The Missouri Miner Newspaper

No abstract provided.