Digital Commons Network^™

Light Gage Cold-Formed Steel Design Manual, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Commentary On The 1961 Edition, George Winter

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Sedimentary Features And Geochemistry Of The Sulphide Facies In The Transition Between The Lamotte Sandstone And The Bonneterre Formation In The Fredericktown Area, Madison County, Missouri, Farouk El Baz

Masters Theses

"SCOPE AND PURPOSE The Lead Belt area of southeast Missouri, which is nearly 40 km. long and 10 km. wide, is considered, at the present time, the most important lead district in the world. Lead has been mined in this area by the natives prior to 1720, and almost continuously up to the present day. A variety of sulphides are mined from different places in the district.

The sulphide deposits in the Lead Belt are considered to be typical examples of the Mississippi Valley Type Deposits, which are distributed all over the world. As in practically all the Mississippi Valley …

Effects Of Solids On Friction Factor In A Sand-Water Mixture, Frank J. Capek

Masters Theses

"At the present time various industries in both the United States and Europe are very interested in using pipelines as a means of transporting solids. The pumping of solids in pipelines isn't new, however, many of the pipelines in use today were constructed on an empirical basis. This is primarily due to the lack of knowledge concerning the flow properties in fluid-solid mixtures and slurries. With this need for fundamental information in mind, the author made a study on the effect solids have on the friction factor in fluid-solid mixtures.

In this paper various percentages of fine and coarse sand …

A Study Of The Dissolution Of Hafnium In Hydrofluoric Acid, James W. Johnson

Doctoral Dissertations

"The purpose of this investigation was to obtain kinetic and electrochemical information concerning the reaction of hafnium with hydrofluoric acid in order to establish the mechanism of dissolution. This included the determination of dissolution rates, the difference effect, and dissolution potentials of hafnium in hydrofluoric acid"--Abstract, page 1.

Effects Of Calcining Temperature On The Physical Properties Of Zirconate Ceramics, P. D. Ownby

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

A Geophysical Investigation Of An Area In Christian County, Missouri, Edwin J. Ballantyne Jr.

Masters Theses

"A vertical intensity magnetic survey of 144 square miles in Christian County, southwest Missouri revealed an 825 gamma anomaly having a closure of 9 square miles. A three mile gravity traverse across the magnetic anomaly detected a positive gravity anomaly in excess of six mllligals.

Calculations showed that a Precambrian hill large enough to cause the observed magnetic anomaly would outcrop at the surface. Because Precambrian rocks are known to be buried under a sedimentary layer, this hypothesis was rejected.

Theoretical anomalies of several geometrical bodies at calculated depths were visually compared with the measured magnetic and gravity profiles. A …

Effect Of Boundary Layer Control, Through Spiral Cuts, On The Film Coefficient Of Convective Heat Transfer, Nicholas W. Barre

Masters Theses

"This thesis is experimental investigation into the possibility of obtaining an increase in the forced convection heat transfer coefficient for a pipe by passing the fluid through a narrow spiral cut in the pipe.

Different spiral pipes with pitches of two, four, eight, ten, sixteen, and twenty inches were used; however, the width of the spiral cut remained unchanged at 3/16 of an inch. Several mass flow rates for water were used up to a maximum of 1536 lbs/hr for each run.

One of the objectives was to find which pitch would give the highest heat transfer rate for a …

A Study Of The Transient State Of Transpiration Cooling, William C. Wolkenhauer

Masters Theses

"This thesis is a successful attempt to show a new approach to the transpiration cooling problem. Transpiration cooling has long been known as an effective way of removing heat from porous material.

It is shown here that transpiration cooling from a porous material, assuming a temperature difference between the coolant and the porous material, is less effective than where the coolant within the pores is assumed to be at the same temperature as the material adjacent to the pore. Previous investigators made the latter assumption.

The specific problem considered here is that of a uniform, porous plate with constant physical …

Preliminary Study Of An Optimum Vibration Absorber For A Multi-Mass System With Multiple Excitation, John Raymond Burrows

Masters Theses

"The object of this thesis is to demonstrate, by the use of a modern digital computer, a fast, efficient method to eliminate or minimize undesirable stress conditions in a multimass vibrating system with multiple excitation. The condition desired is obtained by the addition of an optimum tuned and damped dynamic vibration absorber, for one critical speed only.

Maximum stress is the criteria used for design here and not amplitude as has been used previously by all other authors.

This solution requires the applied torque to be reevaluated as an average torque and a number of half integer harmonics. This method …

The Analysis, Construction, And Calibration Of An Electronic Vibrations Amplifier, Jimmie D. Howard

Masters Theses

"Vibrations analysis necessitates having a device capable of performing some initial phase of detection. The vibration amplifier presented in this thesis performs such an initial aid to analysis by detecting amplitudes of vibrations of varying magnitudes and frequencies. This is accomplished by utilizing a Piezoelectric crystal vibration pickup to obtain an acceleration wave form. Two operational amplifiers perform integrations of the acceleration to obtain displacement. A calibrated meter within the device provides a method of determining magnitudes of displacement. Recording instruments such as the Brush recorder or an oscilloscope may also be used"--Abstract, page ii.

Isothermal Decomposition Of Austenite (In 1.4% Tungsten Steel) At Subcritical Temperatures, Samir Moustafa Riad

Masters Theses

"An experimental investigation was conducted in order to study the relationship between temperature, time and the decomposition of austenite in Tungsten steel of a given composition - and to plot the T-T-T Diagram for this steel.

The steel was prepared, homogenized and cut into identical specimens for further heat treatment and metallographic inspection. Precautions were taken to prevent these specimens from decarburizing during any heat treatment.

This experimental work may be divided into three main parts:-

I. Determination of the critical temperature range; i.e. the range of temperature Ae₁ and Ae₃ above which austenite is stable and below …

Transpiration Cooling Of A Plane Porous Plate, Raymond George Posgay

Masters Theses

"The transient temperatures were determined in a porous plate for one dimensional heat flow and one dimensional counter coolant flow. One surface of the porous plate was heated by a hot gas by convective heat transfer. A general discussion of the problem is considered and the procedure described for working all such problems dealing with transpiration cooling.

The solution of such problems is illustrated by two examples employing a ceramic plate one inch thick and cooled by a uniform flow of air in a direction counter to the flow of heat, while one surface of the ceramic plate was heated …

Investigation Of Vertical Internal Spillways, Paul R. Munger

Masters Theses

"This investigation resulted in the development of a means of predicting the discharge of water through an internal spillway type rockfill dam. From the data obtained during the various tests, equations were developed by which the coefficient of discharge for an internal spillway type rockfill dam can be determined when the core height, rock size and head causing flow are known. The equations give results with an error of less than 5%, which is adequate for engineering works"--Abstract, page 2.

Transient Temperature Distribution In Solid Sphere Subjected To Radiation Heat Exchange, William H. Stocklin

Masters Theses

"The author believes that numerical analysis is the most feasible approach to calculating the transient temperature distribution in a solid sphere subjected to various surface conditions; heat flow within the sphere is radial.

Numerical analysis is employed to arrive at a series of equations for calculating the transient temperature at selected points of a solid sphere. A study is made to determine a method for calculating temperatures with these equations; a computing device is found to be the most practical method for this purpose. The equations for temperatures at internal points of the solid sphere are general.

The equations have …

The Effect Of The Ultraviolet Portion Of The Sun Spectrum On Chlorine Residuals In Water Supplies, Tumkur Mohmed Ameer Ahmed

Masters Theses

"The effect of sunlight on chlorine residuals in water supplies was investigated to provide original and basic information of value to the water purification field.

Three different water systems were employed: (a) The Simplified Water System, (b) The Ground Water System, and (c) The Surface Water System. The RS Sunlamp provided an appropriate source of ultraviolet radiation. A 10 mg/1 chlorine concentration was used. The pH values of 7 and 10 and the illumination intensities of 145 and 200 foot candles were employed. Iodometric determination of chlorine residuals was the main parameter used.

It was found that the chlorine residuals …

Analyses Of Two New Electrode Configurations For Earth Resistivity Surveying, Chi-Chao Chang

Masters Theses

"Two new electrode configurations for the electrical resistivity- surveying are introduced: the A-configuration, consisting of a closely spaced pair of current electrodes separated at larger distance from the closely spaced pair of potential electrodes, and the B-configuration, in which each closely spaced pair consists both current and potential electrode. Because electrode pairs can be carried as units, the new configurations can be applied to continuous resistivity surveying more easily than the Wenner configuration....

Theoretical apparent resistivity values are derived, by Maxwell's theory of images, for the A- and B-configuration over a two layered earth using the depth probe method, and …

Design Of A Square Loop Magnetic Integrating Device, Fred Leland Grismore Jr.

Masters Theses

"The problem investigated in this research was the development of a static integrating circuit applicable to closed loop feedback control systems. Investigation of various methods of attack indicated that square loop magnetic cores offered characteristics required for the integration process. These include the ability to sum input information and the ability to store information for an indefinite period of time.

An experimental program was carried out, investigating the various properties of square loop magnetic materials and required design parameters. Through this work it was verified that the process of integration could be realized by using the partial switching volt-second absorption …

An Investigation Of The Factors Influencing The Design Of A Dense Prilled Ammonium Nitrate-Fuel Oil Mixture, Robert Bartley Hopler Jr.

Masters Theses

"The physical characteristics of dense ammonium nitrate prills were examined. The density was found to be 1.52 grams per cubic centimeter, and from this the specific surface was calculated for the size fractions of interest in the investigation. Theoretical loading densities were calculated for between 26.0 and 47.6 percent voids.

The explosive properties of discrete particle size fractions were investigated. The equation by Clark was found to predict the detonation velocity of the sizes smaller than 8/20 mesh. The equation by Cook could not be applied to dense prilled ammonium nitrate. The possibility of a very oxygen negative condition existing …

Underground Methods Of Working Coal, Hemendra Nath Datta

Masters Theses

"'Underground Methods of Working Coal' is the subject of this thesis. It is the purpose of this investigation to summarize all the mining methods under various conditions of working.

The underground methods of mining have been classified under three headings; viz., (a) Room and Pillar, (b) Longwall and (c) Horizon Mining. The conditions suitable for the applicability of each system and their relative merits and demerits are fully discussed.

The principles of the design of the workings of both room and pillar and longwall systems to have effective roof control in the area of the workings are pointed out.

Distinct …

A Resistivity Study Of Hot Short Ferrous Alloys, Harold Alfred Koelling

Masters Theses

"Resistivity measurements were performed at elevated temperatures on four special ferrous alloys and one commercial iron. The alloys were pure iron, iron with .023 per cent sulfur, iron with .33 copper, iron with .32 copper and .024 sulfur. Other elements were held to the minimum amounts possible in order to determine the actual effects of sulfur and copper. The commercial alloy was Armco Iron.

Measurements of resistivity versus temperature were taken at slow heating rates to determine if the iron sulphide liquid film formed in the grain boundaries of red-short steels had any effect on the electrical resistivity"--Abstract, page 7.

Scatter Matrix Analysis Of Plane Waves In A Layered Media, Bill W. Ashworth

Masters Theses

"The problem was the application of matrix theory to the solution of the reflection and transmission coefficients for a plane wave incident on a layered media. Background material relating to the problem was reviewed. Equations that were used in the solution of the problem were either derived or explained. The derivations for the reflection and transmission coefficients were carried out in order, starting with the simple case of normal incidence on a junction of two infinite media and progressing through the more difficult case of oblique incidence on a layer of finite thickness separating two infinite media. Scatter matrix analysis …

A Study Of The Hood Inlet And Its Possible Use As An Overflow Structure For A Sanitary Lagoon, Richard Irwin Boe

Masters Theses

"A closed conduit, such as an overflow pipe for a conservation pond or a sanitary lagoon, will not flow full if laid on a slope that is hydraulically steep unless the pipe entrance receives special attention. A steep conduit slope is necessary to insure that the pipe entrance controls flow.

The recently introduced hood inlet will permit the closed conduit to flow full, even if on a hydraulically steep slope, upon a slight submergence of the inlet crown. The hood inlet is formed by cutting the pipe at an angle so that the crown of the inlet projects beyond the …

A Preferred Orientation Study Of Sheet Formed By Rolling Copper, Nickel, Titanium And Tungsten Metal Powders, Martin Franklin Marchbanks

Masters Theses

"Pole figure scans of strip rolled from copper, nickel, titanium, and tungsten metal powders were made on samples taken across the width of the strip, and with various amounts of surface material removed, to determine if any preferred orientation existed. No preferred orientation was found in any of the samples examined.

The method used was a modification of the Schultz technique, using the Norelco Pole Figure Fixture, whose geometry and operation is described, in conjunction with the Norelco diffractometer.

Defocusing resulting during the run of a pole figure is discussed and a method for reducing this defocusing is described.

The …

Certain Trace Element Distribution In The Searchlight, Nevada Quartz Monzonite, Clark County, Nevada, Jai Nandan Shrivastava

Masters Theses

"The once prosperous gold, silver, copper and lead mines of the Searchlight mining district, Nevada, are situated along the south and western margins of a large quartz monzonite body. This intrudes the Precambrian gneisses and younger lava flows. Associated mineral veins show an eccentric type of zoning around the intrusive.

Seven rock samples of the quartz monzonite representing different parts of the intrusive were analyzed petrographically and spectrographically. Modal analyses and various types of rock alteration were investigated petrographically. Spectrochemical analyses of the rock samples and their major minerals were carried out for certain trace elements. A semi-quantitative method was …

A Study Of Viscous Frictional Effects And Relay Characteristics On The Operation Of A Positional Relay Servomechanism, Earl F. Richards

Masters Theses

"The thesis describes some experimentally observed data and analytical approaches to the study of a relay servomechanism. The experimental data were secured from an analog simulation of a relay servo system. The results of this data were compared to the transient approach by use of the phase-plane method. The stability of the system was determined using a describing-function. The analytical approaches are described in the presentation.

A study of the effects of viscous friction is described, and the characteristic of the relay used in the system is given special attention. The response to input driving function was considered, and rise …

Transient Temperature Distribution In An Infinite Plate Subjected To Convection And Radiation Heat Exchange, Billy W. Marshall

Masters Theses

"The desired result of this paper is a method of calculating transient temperatures in an infinite plate. The resulting equations are general to the extent possible for aerodynamic heating and radiation boundary conditions. The possible methods of calculation were investigated, and it was felt that a numerical analysis presented the most feasible approach.

Numerical analysis was employed to arrive at a series of equations for calculating the temperatures at selected positions in an infinite plate. A study was then made to determine a method of solving these equations by means of some high speed computing device.

The equations were adapted …

Correlation Of Dust-Count Results By Zeiss Konimeter And Midget Impinger, Chandmal Jain

Masters Theses

"In this modern age, the scientific and technological developments have advanced mechanized mining to the status wherein the attendant dust problems have reached very serious hazard proportions. The significant roles, which have been perfected for the Zeiss konimeter and the midget impinger, in evaluating dust concentrations and thereby revealing possible improvements in making the atmospheric conditions safer, cannot be over emphasized.

While introducing the subject of this paper in the first chapter, the author has presented a historical resume, wherein he pointed out that performances of these instruments have not been correlated in the past. However, the work reported on …

Design, Construction And Operation Of Equipment For The Study Of Evaporation Of Aqueous Solutions Using A Simplified Reactor Design Approach, Virendra Kumar Mathur

Masters Theses

"The study of simultaneous heat and mass transfer in flow reactors has attracted the attention of many workers for a long time due to its wide application in the industrial field. These heat and mass transfer studies play an important role in determining the rate equations and in turn the size of the reactor itself. A large number of chemical reactions have been studied by various workers….

The purpose of this work comprised only the initial or exploratory phase of this overall project, and deals with the design, construction and assembling of the equipment necessary to carry out the vaporization …

The Rollamo 1961, The University Of Missouri School Of Mines And Metallurgy

Yearbooks

No abstract provided.