Digital Commons Network^™

Analytical Guidance Laws And Integrated Guidance/Autopilot For Homing Missiles, S. N. Balakrishnan, Donald T. Stansbery, J. H. Evers, J. R. Cloutier

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An approach to integrated guidance/autopilot design is considered in this study. It consists of two parts: 1) recognizing the importance of polar coordinates to describe the end game in terms of problem description and measurement acquisition, the terminal guidance problem is formulated in terms of polar coordinates; 2a) through the use of the state transition matrix of the intercept dynamics, a closed form solution for the transverse command acceleration is obtained; and 2b) through a commonly used approximation on time-to-go and a coordinate transformation, a family of proportional navigation optimal guidance laws is obtained in a closed form. A typical …

Defect Structure Of Y1-Ycaymno3 And La1-Ycaymno3. I. Electrical Properties, J. W. Stevenson, M. M. Nasrallah, Harlan U. Anderson, Don M. Sparlin

Materials Science and Engineering Faculty Research & Creative Works

Electrical conductivity and the Seebeck coefficient of compositions in the system Y_1-yCa_yMnO₃ and La_1-yCa_yMnO₃ were studied to determine the mechanism of electrical transport and defect structure. Electrical conduction appeared to occur via a small polaron hopping mechanism for compositions with 0.30 ≤ y ≤ 0.80. The Seebeck coefficient data did not support the assumption that Mn is present in Cadoped Mn perovskites only in the +3 and +4 valence states. A new defect model was developed which includes the thermally excited disproportion of Mn³⁺ and Mn⁴⁺ pairs. The …

Ensuring The Satisfaction Of A Temporal Specification At Run-Time, Grace Tsai, Matt Insall, Bruce M. Mcmillin

Computer Science Technical Reports

This paper presents an approach to operationally evaluate a temporal specification in a distributed computing environment. First, an algorithm Compute History is proposed to allow every distributed processor to collect events executed by itself and by other processors, and to order the collected events by causality. This algorithm employs neither monitors nor a global clock to order collected events of a processor. These collected events of a processor form an execution history of a distributed computation, and they represent behaviors of all the processors during execution. Next, the semantics of operational evaluation of a temporal assertion is presented. The evaluation …

Computer Simulation Of Three-Dimensional Mechanical Assemblies: Part I - General Formulation, Yong Fang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In Part I of this paper, a dynamic modeling system for the simulation of three-dimensional mechanical assemblies is presented. With this simulation tool, a designer can interactively create an assembly of mechanical components ready for dynamic analysis. The modeling system presented in this paper include» the derivation of the equations of motion of spatial multi-body systems, and the formulation of the equations to model the associated collision detection and collision responses. Part II of this paper is to introduce the geometry modeling and computer simulation of 3D systems.

A Study Of Fatigue Failure In Superalloys Using Positron Annihilation, D. Hoeckelman, Hollis P. Leighly

Materials Science and Engineering Faculty Research & Creative Works

This study shows there are significant changes occurring in the open volume defect concentration during fatigue cycling as measured by the S parameter. These changes are dependent upon the stress ratio, R = σmin/σmax, the maximum stress, σmax, and the number of fatigue cycles. The decline in the S parameter is due to the elimination of the residual vacancies. This decline is followed by an increase due to the generation of dislocations and the formation of small microcracks. This is followed by a decline in the S parameter due to growth of the microcracks ultimately leading to failure. Copyright © …

Defect Structure Of Y1-Ycaymno3 And La1-Ycaymno3. Ii. Oxidation-Reduction Behavior, J. W. Stevenson, M. M. Nasrallah, Harlan U. Anderson, Don M. Sparlin

Materials Science and Engineering Faculty Research & Creative Works

Electrical conductivity, Seebeck coefficient, and thermogravimetric behavior of compositions in the systems Y_1-yCa_yMnO₃ and Y_1-yCa_yMnO₃ were studied as functions of temperature and ambient oxygen activity in order to determine the mechanism of electrical transport and defect structure. Compositions in Y_1-yCa_yMnO₃ exhibited very slight oxygen activity-dependent behavior as the ambient oxygen activity was reduced. A defect model which includes the thermally excited disproportionation of Mn³⁺ into Mn²⁺ and Mn⁴⁺ pairs was applied to the oxygen-activity-dependent data for La_0.80Ca_0.20MnO_{3 …}

The Influence Of Matrix Microstructure, G. M. Vyletel, J. E. Allison, David C. Van Aken

Materials Science and Engineering Faculty Research & Creative Works

The low-cycle and high-cycle fatigue behavior and cyclic response of naturally aged and artificially aged 2219/TiC/15p and unreinforced 2219 Al were investigated utilizing plastic strain-controlled and stress-controlled testing. The cyclic response of both the reinforced and un-reinforced materials was similar for all plastic strain amplitudes tested except that the saturation stress level for the composite was always greater than that of the unreinforced material. The cyclic response of the naturally aged materials exhibited cyclic hardening and, in some cases, cyclic softening, while the cyclic response for the artificially aged materials showed no evidence of either cyclic hardening or softening. The …

Phenotypic Characterization Of Copper-Resistant Mutants Of Methylosinus Trichosporium Ob3b, M. (Mark) W. Fitch, D. W. Graham, R. G. Arnold, S. K. Agarwal, P. Phelps, G. E. Speitel, G. Georgiou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Cultures of Methylosinus Trichosporium OB3b Grown in the Presence of Very Low Concentrations of Copper Synthesize a Soluble Methane Monooxygenase (SMMO) that Efficiently Catalyzes the Oxidation of Trichloroethylene and Other Organic Pollutants. Recently, We Isolated Five M. Trichosporium OB3b Mutants that Express SMMO Activity When Grown in the Presence of Elevated Copper Concentrations (P. A. Phelps, S. K. Agarwal, G. E. Speitel, Jr., and G. Georgiou, Appl. Environ. Microbiol. 58:3701-3708, 1992). Here We Show that, in Contrast to the Results for the Wild-Type Cells, the Addition of Copper to Mutant Cultures Grown on Methane and Nitrate as the Nitrogen Source …

Detection Of Skin Tumor Boundaries In Color Images, Fikret Erçal, M. Moganti, William V. Stoecker, Randy Hays Moss

Computer Science Faculty Research & Creative Works

A simple and yet effective method for finding the borders of tumors is presented as an initial step towards the diagnosis of skin tumors from their color images. The method makes use of an adaptive color metric from the red, green, and blue planes that contains information for discriminating the tumor from the background. Using this suitable coordinate transformation, the image is segmented. The tumor portion is then extracted from the segmented image and borders are drawn. Experimental results that verify the effectiveness of this approach are given

Self-Diffusion Studies In Polymer-Solvent Systems By Pulsed-Gradient Spin-Echo Nuclear Magnetic Resonance, R. Allen Waggoner

Doctoral Dissertations

"Pulsed gradient NMR techniques have been used to study self-diffusion in polymer solutions. The systems studied include toluene, cyclohexane, ethylbenzene, chloroform, t-butyl acetate, and methyl ethyl ketone in polystyrene; methyl methacrylate in poly(methyl methacrylate); poly(ethylene oxide) in water; and water in biological tissue. The polymer diffusion data are evaluated in terms of scaling theory as they relate to the scaling of the polymer diffusion coefficient with molecular weight. The solvent diffusion data are evaluated with kinetic and free-volume theories. In addition a relatively simple dependence of diffusion coefficient on polymer volume fraction is derived from free-volume theory. The solvent diffusion …

Formal Method For Scheduling, Routing And Communication Protocol, Lenore Mullin, S. A. Thibault, D. R. Dooling, E. A. Sandberg

Computer Science Faculty Research & Creative Works

The PRAM model has been shown to be an optimal design for emulating both loose and tightly coupled multiprocessors for unit time operations. When virtual processors are required, multiplexing work to available processors is employed. This introduces a form of latency incurred by operating system overhead. Further complications arise when bandwidth creates bottlenecking of work units. G.E. Blelloch (1989) showed how to add parallel prefix operations (scans) to an extended PRAM model which uses unit step, not time operations. This paper shows how the psi) calculus can be used to group work units, i.e., pipelining the work units, so that …

Assessment Of Environmental Implications Of Abandoned Oil And Gas Wells, Donald L. Warner, Cary L. Mcconnell

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A detailed study was made of the potential for abandoned oil and gas wells in the Lower Tuscaloosa sand of Mississippi and Louisiana to act as conduits for movement of saline water from the Lower Tuscaloosa into underground sources of drinking water (USDW's). Finite-difference numerical modeling determined the extent that water might be forced from the Lower Tuscaloosa sand into a USDW as a result of injection into the Lower Tuscaloosa. Within the range of conditions modeled, water from the Lower Tuscaloosa never traveled into a USDW. On the basis of the modeling, we concluded that it is unlikely that …

Galvanic Stripping Of Fe⁺³ And Pb⁺² Ions And Dissolution Of Metallic Fe, Zn, Pb And Cd Using Di(2-Ethylhexyl)Phosphoric Acid, Luis Miguel Chia Aquije

Doctoral Dissertations

"Two systems were evaluated using the principles of the galvanic stripping process. One of them, the removal of Pb⁺² ions from di-2(ethylhexyl) phosphoric acid (D2EHPA) was performed using metallic zinc. The other, the removal of Fe⁺³ ions from D2EHPA used metallic iron as reductant and was performed simultaneously with the organic phase using a slightly acidic aqueous solution of hydrochloric acid. In addition, the dissolution of metallic zinc, iron, lead, and cadmium in D2EHPA was studied in order to better understand the anodic step in the mechanism of the galvanic stripping process.

Increased temperature was found to dramatically …

Visual Inspection Algorithms For Printed Circuit Board Patterns A Survey, Madhav Moganti, Fikret ErçAl, Cihan H. Dagli

Computer Science Technical Reports

The importance of the inspection process has been magnified by the requirements of the modern manufacturing environment. In electronics mass-production manufacturing facilities, an attempt is often made to achieve 100 % quality assurance of all parts, subassemblies, and finished goods. A variety of approaches for automated visual inspection of printed circuits have been reported over the last two decades. In this survey, algorithms and techniques for the automated inspection of printed circuit boards are examined. A classification tree for these algorithms is presented and the algorithms are grouped according to this classification. This survey concentrates mainly on image analysis and …

Genetic Algorithms With 3-Parent Crossover, L. Vincent Edmondson

Doctoral Dissertations

"A new genetic algorithm which uses a 3-parent uniform crossover operator is developed and analyzed. Uniform crossover operators are shown to be based on the premise that all bit-level genetic information should be passed from parents to children. The 3-parent uniform crossover operator is shown to adhere to this premise. The 3-parent uniform crossover operator is shown to be better than the 2-parent uniform crossover operator on the De Jong test functions.

Two new genetic algorithms which use 3-parent traditional crossover operators are developed and analyzed. The first uses a strategy of randomly selecting 3 of the 6 children resulting …

Infarct Topography And Hemiparesis Profiles With Cerebral Convexity Infarction: The Stroke Data Bank, J. P. Mohr, M. A. Foulkes, A. T. Polis, D. (Daniel) B. Hier, C. S. Kase, T. R. Price, T. K. Tatemichi, P. A. Wolf

Chemistry Faculty Research & Creative Works

For the 183 of 1276 Patients in the NINDS Stroke Data Bank with Convexity Infarction in the Middle Cerebral Artery Territory, the Size of the Infarct Did Not Differ between the Two Sides But the Location of the Main Site of the Infarct Differed: on the Left Side, It Was Centered in the Inferior Parietal Region, and Was Mid-Frontal on the Right. There Was a Good Correlation between Infarct Size and Weakness Severity Whether Estimated by overall Motor Function on One Side, Arm, or Hand Alone. There Was a Poor Correlation, However, for Lesion Location (Lower Third, Middle Third or …

A Tad Lexicon, Leonard Zwilling

Arts, Languages and Philosophy Faculty Research & Creative Works

No abstract provided.

Automatic Color Segmentation Algorithms-With Application To Skin Tumor Feature Identification, Scott E. Umbaugh, Randy Hays Moss, William V. Stoecker, G. A. Hance

Electrical and Computer Engineering Faculty Research & Creative Works

Two color-image segmentation methods are described. The first is based on a spherical coordinate transform of original RGB data. The second is based on a mathematically optimal transform, the principal components transform (also known as eigenvector, discrete Karhunen-Loeve, or Hotelling transform). These algorithms are applied to the extraction from skin tumor images of various features such as tumor border, crust, hair scale, shiny areas, and ulcer. The results of this research will be used in the development of a computer vision system that will serve as the visual front-end of a medical expert system to automate visual feature identification for …

Reversible Complexation Of O2 To (Meso-Tetraphenylporphyrinato)Cobalt(Ii) Plasma Polymer And Sublimed Films At Room Temperature, J. M. Skelly, Nicholas C. Morosoff, V. T. Stannett, A. L. Crumbliss

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Faculty Senate Minutes 1992 - 1993, Missouri University Of Science And Technology Faculty Senate

Minutes & Agendas

No abstract provided.

Aminolysis Of Activated Esters Of Indole-3-Acetic Acid In Acetonitrile, Michael J. Pfeiffer, Samir B. Hanna

Chemistry Faculty Research & Creative Works

Seven activated esters of indole-3-acetic acid (IAA) [4-oxo-l,2,3-benzotriazin-3-yl indole-3-acetate (IAA-3HBO), succinimido indole-3-acetate (IAA-NHS), 5-norbornene-1,3-dicarboximido indole-3-acetate (IAA-NHND), phthalimido indole-3-acetate (IAA-NHP), naphthalimido indole-3-acetate (IAA-NHN), 4-nitrophenyl indole-3-acetate (IAA-4NP), 8-quinolyl indole-3-acetate (IAA-8HQ)] were prepared and characterized. Their kinetics of aminolysis with butylamine, piperidine, and pyrrolidine in acetonitrile were investigated. In general, the observed pseudo-first-order rate constants, kobs, fit the two-term rate equation kobs = k1[amine] + k2[amine]2. For the aminolysis of six of the esters with piperidine there was no measurable k2 term. The 8-hydroxyquinoline ester and N-hydroxy-naphthalimide ester of indole-3-acetic acid had no measurable k2 term for aminolysis with either pyrrolidine or piperidine. …

On The Use Of Levy's Method For Symmetrically Laminated Composite Plates, Serge Abrate

Mechanical and Aerospace Engineering Faculty Research & Creative Works

For rectangular plates with two opposite edges simply supported and no bending twisting coupling, Levy's method can yield exact solutions for static deflections, free vibrations and buckling loads. However, three distinct solutions are obtained, depending on the relative magnitude of the plate rigidities, which in turn are functions of material properties, laminate thickness and lay-up. In this communication a stiffness invariant formulation is used to identify those laminates which fall under the three cases defined. © 1993.

Functional Representation And Reasoning About The F/A-18 Aircraft Fuel System, M. Pegah, J. Sticklen, William E. Bond

Computer Science Faculty Research & Creative Works

Functional reasoning, a subfield of model-based reasoning, is discussed. This approach uses abstractions of a device's purpose to index behaviors that achieve that purpose. Functional modeling, a variation on this method, also uses simulation as a core reasoning strategy. The complex causal knowledge of a device along functional lines is decomposed, then a causal story of how the device will operate in a particular situation given stated boundary conditions is composed. The application of the functional approach to modeling the fuel system of a F/A-18 aircraft is described. The representation of the F/A-18 fuel system includes 89 component devices, 92 …

Lattice Boltzmann Thermohydrodynamics, F. J. Alexander, S. Chen, J. D. Sterling

Business and Information Technology Faculty Research & Creative Works

We introduce a lattice Boltzmann computational scheme capable of modeling thermohydrodynamic flows of monatomic gases. The parallel nature of this approach provides a numerically efficient alternative to traditional methods of computational fluid dynamics. The scheme uses a small number of discrete velocity states and a linear, single-time relaxation collision operator. Numerical simulations in two dimensions agree well with exact solutions for adiabatic sound propagation and Couette flow with heat transfer. © 1993 The American Physical Society.

Enantiomeric Separation Of Chiral Components Reported To Be In Coffee, Tea, Or Cocoa, Apryll M. Stalcup, K. Helen Ekborg, Mary P. Gasper, Daniel W. Armstrong

Chemistry Faculty Research & Creative Works

Literally hundreds of volatile compounds have been identified in coffee, tea, and cocoa. A significant proportion of these compounds are known to be chiral. The enantiomeric composition of most of these compounds is unknown, and until recently there were no efficient analytical procedures for their identification. The advent of cyclodextrin-based chiral stationary phases for capillary gas chromatography provides effective means for the enantioselectivity analysis of many of these compounds. Some of these are known to be flavor and fragrance components that occur naturally or are produced from the manufacturing process (e.g., fermentation, drying, and roasting). © 1993, American Chemical Society. …

Simplified Strength Prediction For Cold-Formed C- And Z-Shapes, Roger A. Laboube

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Although cold-formed steel C- and Z-shaped members possess a very favorable strength-to-weight ratio, are easily fabricated and erected, and offer a cost-effective structural design solution, they can be highly susceptible to local buckling. To adequately address the impact of the local buckling limit state, a complex, time-consuming design office effort may be required. Therefore, to facilitate the design of such shapes, a study was conducted that focused on developing relatively simple, easy-to-apply design guidelines. The design guidelines address the behavior of cold-formed steel C- and Z-shaped members when used as either a flexural member or a compression member. Both edge-stiffened …

Collapse Behavior Of Pino Suarez Building During 1985 Mexico City Earthquake, Jeng Fuh Ger, Franklin Y. Cheng, Le Wu Lu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the investigation of the collapse behavior of a 22-story steel building during the September 19, 1985, Mexico City earthquake by studying hysteretic behavior, ductility factors of individual structural components, and overall instability of the building. Extensive inelastic analyses have been performed for the building by using the multicomponent seismic input of actual Mexico City earthquake records. It was found that the structural response exceeds the original design ductility of this building, and most girders in the building have severe inelastic deformation. Due to the load redistribution that results from ductile girder failure, local buckling occurred in many …

Neural Networks In The Former Soviet Union, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

A Model Of Electronic Warfare Systems Acquisition And Engineering For Saudi Arabia, Negaa M. Albegami

Doctoral Dissertations

"A major activity within the systems engineering process is the requirements definition and analysis phase. In technical systems, planning this phase looks too technical for top management and too broad for the engineers specialized in narrow technical fields. This categorization (too technical/too broad) represents a gap between top management and specialized engineering. In Saudi Arabia, such a gap is believed to be very wide.

The main objective of this research is to find a way to narrow this gap between management and engineering when planning government systems, especially in electronic warfare (EW) systems. A solution in this effort is to …

Tetrabutylammonium Benzoate‐Initiated Polymerization Of Propylene Oxide, Xuemin Chen, Michael R. Van De Mark

Chemistry Faculty Research & Creative Works

The polymerization of propylene oxide by the benzoate anion was aided through the use of the tetrabutylammonium counterion. The effect of the tetrabutylammonium ion was to increase the solubility of the salt and to increase the ion separation. The polymerization was carried out in a pressure reactor at temperatures from 40 to 108°C, producing polymer yields of 2–78%. The study addressed the general effects of solvent, temperature, and ratio of initiator to monomer. © 1993 John Wiley & Sons, Inc. Copyright © 1993 John Wiley & Sons, Inc.