Digital Commons Network^™

Strength Of Flexural Members Using Structural Grade 80 Of A653 Steel (Web Crippling Tests), Shaojie Wu, Wei-Wen Yu, Roger A. Laboube

CCFSS Library (1939 - present)

This Third Progress Report summarizes the web crippling tests of 148 specimens and evaluates the test results along with an additional 114 web crippling tests which were reported in 1986 as part of a project on Design of Automotive Structural Components Using High-Strength Sheet Steels. The 148 web crippling tests conducted in this program are the part of the overall project on Strength of Flexural Members Using the Structural Grade 80 of ASTM A653 Steel (former ASTM A446 Grade E Steel). The objectives of the ongoing project are to study the strength and structural performance of flexural members as affected …

Ccfss News February 1997, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Newsletters (1999 - 2008)

No abstract provided.

The Missouri Miner, January 29, 1997

The Missouri Miner Newspaper

No abstract provided.

Affinity Adsorption Of Adsorbates Into Spherical Monodisperse And Bidisperse Porous Perfusive And Purely Diffusive Adsorbent Particles Packed In A Column. Parameter Estimation In The Laplace Transform Domain, G. A. Heeter, Athanasios I. Liapis

Chemical and Biochemical Engineering Faculty Research & Creative Works

A novel mathematical method for parameter estimation is proposed and used to estimate in the Laplace transform domain the values of the parameters that characterize the mechanisms of intraparticle diffusion and convection in spherical perfusive or purely diffusive adsorbent particles with a monodisperse or with a bidisperse porous structure when the adsorbent particles are packed in a column. The parameter estimation method in the Laplace transform domain presented in this work is significantly simpler, easier to use and dramatically faster than the conventional parameter estimation procedure in the time domain, which requires the repeated numerical solution of the partial differential …

Chiral Separation Of Monoterpenes Using Mixtures Of Sulfated Β-Cyclodextrins And Α-Cyclodextrin As Chiral Additives In The Reversed-Polarity Capillary Electrophoresis Mode, Kyung Hyun Gahm, Lisa W. Chang, Daniel W. Armstrong

Chemistry Faculty Research & Creative Works

The use of mixtures of sulfated β-cyclodextrins and native α-cyclodextrin as chiral additives in capillary electrophoresis was evaluated for the chiral resolution of neutral, cyclic and bicyclic monoterpenes, including α-pinene, (β-pinene, camphene and limonene. Binding properties of sulfated β-cyclodextrins towards these monoterpenes were studied. It was found that there was no enantioresolution of these terpenoids over the concentration range studied. However, the addition of α-cyclodextrin to the running electrolyte in addition to 6.5 mM sulfated β-cyclodextrins, imparted differences in the mobilities of the terpenoid enantiomers and resulted in remarkable enantiomeric separations of α-pinene (R(s)=25), β-pinene (R(s)=12), camphene (R(s)=12) and limonene …

The Missouri Miner, January 23, 1997

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, Spring 1997, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

Elimination Of Supply Harmonics, Stephen L. Clark, P. Famouri, W. L. Cooley

Mathematics and Statistics Faculty Research & Creative Works

The price of the extensive use of power electronic devices is becoming clear: increasing harmonic "pollution." The greater amount of harmonics being introduced into power distribution systems is of concern to both power consumers and power companies. First, a brief look is taken at background information which describes harmonic sources, effects, and characteristics. Then the evolution of the harmonics elimination approaches of current compensation and active filtering are discussed to give some insight into the directions that research is taking.

On The Behavior Of The Solutions Of The Navier-Stokes Equations At Vanishing Viscosity, Roger Temam, Xiaoming Wang

Mathematics and Statistics Faculty Research & Creative Works

In this article we establish partial results concerning the convergence of the solutions of the Navier-Stokes equations to that of the Euler equations. Namely, we prove convergence on any finite interval of time, in space dimension two, under a physically reasonable assumption. We consider the flow in a channel or the flow in a general bounded domain.

Time Averaged Energy Dissipation Rate For Shear Driven Flows In ℝⁿ, Xiaoming Wang

Mathematics and Statistics Faculty Research & Creative Works

We drive an upper bound of the time averaged energy dissipation rate for boundary driven flows directly from the Navier-Stokes equations in ℝⁿ. the upper bound is independent of the kinematic viscosity in accordance with Kolomogorov's scaling result. Copyright © 1997 Elsevier Science B.V. All rights reserved.

Disconjugacy And Transformations For Symplectic Systems, Martin Bohner, Ondřej Došlý

Mathematics and Statistics Faculty Research & Creative Works

We examine transformations and diconjugacy for general symplectic systems which include as special cases linear Hamiltonian difference systems and Sturm-Liouville difference equations of higher order. We give a Reid roundabout theorem for these systems and also for reciprocal symplectic systems. Particularly, we investigate a connection between eventual disconjugacy of linear Hamiltonian difference systems and their reciprocals. Finally, we present a dinsconjugacy-preserving transformation of a Sturm-Liouville equation of higher order which transforms this equation into another one of the same order.

Design Of Automotive Structural Components Using High Strength Sheet Steels Mechanical Properties Of Materials (Aging Effect), Shaojie Wu, Chi-Ling Pan, Wei-Wen Yu

CCFSS Library (1939 - present)

INTRODUCTION It has been known for years that mechanical properties of thin sheet steels, such as yield strength, tensile strength, and ductility, are affected by aging (Chajes et al. 1963, Hertzberg 1989, Yu 1991). The aging effect on mechanical properties can be described as follows. For a virgin steel that is initially loaded in tension beyond its yield strength and into strain hardening state and then unloaded to zero stress, the yield and tensile strengths of the steel increase while the ductility of the steel decreases if the steel is reloaded in tension again after a period of time from …

How Stream Fungal Biodiversity Affects Ecosystem Functions, Vale J. Miller, Dev Niyogi

Biological Sciences Faculty Research & Creative Works

There was an observable impact on leaf decomposition and respiration rate. Respiration was much higher among the biodiverse microcosm compared to the other treatments, and the biodiverse treatment had the least amount of biomass remaining.

Assessment Of The Effects Of High-Pressure Operation On The Liquid-Solid Mass-Transfer Coefficient In Trickle-Bed Reactors, M. (Muthanna) H. Al-Dahhan, W. Highfill, M. Friedman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Trickle-Bed Reactors Are Used Widely in Industry and Are Usually Operated at High Pressure. All the Studies on Liquid-Solid Mass Transfer in Such Reactors Were Performed under Atmospheric Pressure And, Hence, the Empirical Correlations for Liquid-Solid Mass-Transfer Coefficients (K1s and K1sa) Were Developed based on Atmospheric Data. However, These Correlations Incorporate One or More of the Parameters Affected by Pressure (E.g., Liquid Holdup, Catalyst Wetting Efficiency, Pressure Drop, Gas Density). in This Work the Effects of High Pressure and High Gas Flow Rates on the Predicted Coefficients using Some of These Correlations Are Evaluated. It is Shown that There Are …

Spherical Harmonics - Finite Element Treatment Of Neutron Transport In Cylindrical Geometry, Hatem Khouaja, D. Ray Edwards, Nicholas Tsoulfanidis

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

A variational spherical harmonics (DPN) method is used in conjunction with the finite element method to solve the transport of neutron beams. The method is developed for finite axisymmetric cylindrical geometry. In this model, the angular distribution along the path of neutron travel is separated into two sub-ranges of the forward and the backward moving particles. The system of the model equations is cast in terms of an even and an odd vector analogue to the even-parity transport technique. The finite element method is applied in space to solve the resulting coupled system of equations. A source-free cylinder with specified …

Multiobjective Optimum Design Of Static And Seismic-Resistant Structures With Genetic Algorithm, Fuzzy Logic And Game Theory, Dan Li

Doctoral Dissertations

"The goal of this research is to develop a constrained multiobjective optimization method in the form of a robust, practical, problem-independent algorithm, and to investigate the effect of multiobjective optimization on structural design.

This research studies the properties and characteristics of multiobjective optimization and solutions. Design objectives, constraints and design variables as well as their effect on structural design and behaviors are investigated. Dynamic input energy for a multidegree-of-freedom structure is formulated. A multiobjective optimization algorithm based on game theory is developed. Fuzzy set theory is introduced to construct a fuzzy constrained environment. A Pareto genetic algorithm is developed based …

Stemming Technique For Loading Angled Holes Charged With Anfo, Michael David Wilkins

Masters Theses

"Little research has been published on stemming blast holes, particularly what happens during the process. Previous work has concentrated on the performance of the inert material to find the best way to seal the hole and retain the explosive energy, at the exclusion of determining what happens during the loading and stemming process. Such studies were carried out by Konya and Worsey.

The major problem with stemming studies is that rock is an opaque material, and the actual mechanisms involved during the stemming process cannot be viewed. For this reason, tests were performed using clear tubes to simulate a blast …

Reinforcement Of Web Openings In Cold-Formed Steel Members, Erika Kirsten Nelson

Masters Theses

"To expand on previous research concerning perforated cold-formed steel web elements, an experimental investigation was conducted to examine the influence of reinforcement on the behavior and strength of single web flexural members with web openings. In current design practice, reduction factors are applied to the strength equations to account for the debilitating effect of web openings. This reduction in capacity may lead to the selection of a greater member thickness or depth than would be required of a solid web member. A more economical approach may be to reinforce the web in the proximity of the opening to increase the …

Asynchronous Distance Learning Technology: The Instructor's Perspective, Earl Alexander Evans

Masters Theses

"Advances in communications, computer technology and human-computer interfaces have enabled concurrent advances in Web-based education. A number of case studies concerning applications of Web-based education for both distance learning and on-campus programs have been published. Primarily, these studies have focused on individual assessments of the Web-based technologies. In addition, these published studies have generally highlighted the successes while little discussion about failed attempts has been presented in the literature.

In contrast, this thesis provides a broad-based assessment of applied Web technology for higher education. This research was conducted via a survey completed by twenty five university and college faculty from …

Some Properties Of Hereditarily Indecomposable Chainable Continua, Thomas John Kacvinsky

Masters Theses

"In 1920, B. Knaster and C. Kuratowski raised the question of whether each homogeneous plane continuum is a simple closed curve. In 1921, S. Mazurkiewicz raised the question of whether each subcontinuum of Euclidean n-space which is homeomorphic to each of its subcontinua is necessarily an arc. In that same year, B. Knaster and C. Kuratowski raised the question of whether there exists a nondegenerate hereditarily indecomposable continuum.

The third question was answered in the affirmative in 1922 by B. Knaster, when he constructed a nondegenerate hereditarily indecomposable subcontinuum of the plane.

The second question was answered in 1947 by …

A Finite Element Formulation For Aft Fan Duct Acoustic Radiation, Walter Eversman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A finite element code has been developed for the prediction of the radiated acoustic field in and around the aft fan duct of a turbofan engine. The acoustic field is modeled based on the assumption that the steady flow in and around the nacelle is irrotational as is the acoustic perturbation. The geometry of the nacelle is axisymmetric, and the acoustic source is harmonic and decomposed into its angular harmonics. The steady flow is computed on the acoustic mesh and provides data for the acoustic calculations. The jet is included in the steady flow potential flow model by separating the …

Analysis Of Rockbolt Reinforcement Using Beam-Column Theory, Samit Roy, Anand B. Rajagopalan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A simple analytical procedure that applies classical beam-column theory for evaluating passive rock bolt roof reinforcement is presented in this paper. The analytical model is derived from first principles and is capable modelling any number of reinforcing bolts. Each rock bolt is modelled as a linear spring and the model allows for non-uniform bolt spacing. In this study the rock beam is assumed to be isotropic and linearly elastic for the sake of simplicity. However, the analytical model can be extended to include anisotropic rock mass as well as inelastic material behavior. The solution to the couped set of governing …

Radiative Heating In Scramjet Combustors, Harlan F. Nelson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Currently, there is considerable interest in scramjet engines for hypersonic aircraft and missiles. This paper presents preliminary calculations of the radiative heating of the walls of scramjet combustion chambers. The analysis assumes isothermal, constant property flow fields that are representative of actual combustor flow fields. The fuel is H2, and N2 is taken as inert. Temperature in the combustor is on the order of 2000-3000 K and the pressure is of the order of 5 atm. The combustion products consist mainly of H2O and OH. These gases are strong radiators in the infrared. Radiation heating can be significant because of …

A System For Collecting Milligram Quantities Of Cloud Condensation Nuclei, Darryl J. Alofs, Donald E. Hagen, Steven D. Medley, Daniel R. White, John L. Schmitt, Allen L. Williams

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An Experimental System to Collect Cloud Condensation Nuclei (CCN) Onto Filters in Amounts Sufficient for Chemical Analysis is Described. This Experimental Apparatus is Designed to Process Ambient Air at a Rate of More Than 1 M3/min. Two Identical Systems Have Been Built. One is Installed in a Laboratory at Rolla, MO. the Other is Installed on an 11 M Long Trailer. the System Isolates Three Size Classes of CCN, Having Mass Median Diameters of 0.27, 0.12, and 0.075 Μm, Respectively, and Mass Collection Rates of 11.5, 1.28, and 0.13 Mg/day, Respectively. the above Sizes and Collection Rates Are Obtained from …

Backpropagation Of Accuracy, Donald C. Wunsch, M. Yu Senashova, Alexander N. Gorban

Electrical and Computer Engineering Faculty Research & Creative Works

We solve the problem: how to determine maximal allowable errors, possible for signals and parameters of each element of a network, proceeding from the condition that the vector of output signals of the network should be calculated with given accuracy? "Backpropagation of accuracy" is developed to solve this problem

Effect Of Cl Incorporation On The Performance Of Amorphous Silicon Thin Film Transistor, Jong Hyuni Choi, Chang-Soo Kim, Sung Ki Kim, Jin Jang

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

High Order Orthogonal Tensor Networks: Information Capacity And Reliability, Donald C. Wunsch, Y. M. Mirkes, Alexander N. Gorban

Electrical and Computer Engineering Faculty Research & Creative Works

Neural networks based on construction of orthogonal projectors in the tensor power of space of signals are described. A sharp estimate of their ultimate information capacity is obtained. The number of stored prototype patterns (prototypes) can many times exceed the number of neurons. A comparison with the error control codes is made

Miniaturized Isfet Glucose Sensor Including A New Structure Actuation System, Chang-Soo Kim, Hwa-Il Seo, Chae-Hyang Lee, Byung-Ki Sohn

Electrical and Computer Engineering Faculty Research & Creative Works

A new principle of an amperometric actuation technique was incorporated in the ISFET glucose sensor. The ISFET is fabricated by the CMOS process and the platinum working electrode is deposited by the lift-off process. A sensor with a specially designed ladder type working electrode exhibits improved operation in response time, response magnitude and detection range. An expectation concerning the reduction of sensor size is also discussed.

Prediction Of Yarn Strength From Fiber Properties Using Fuzzy Artmap, Raonak Zaman, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

The count-strength-product (CSP) of cotton yarn is a complex function of fiber properties and spinning performance. The traditional way of predicting yarn CSP is using linear multiple regression. The correlation coefficient between actual CSP and predicted CSP obtained from linear regression is almost always less than 0.9. In this paper, we used a Fuzzy ARTMAP network to predict yarn CSP from fiber properties and spinning performance. Fiber properties and spinning data were used as inputs to ART_a, and yarn CSP was used as ART_b input. Our objectives are: better prediction of the quality of the end product, …

Safety Analysis Of Redundant Systems Using Fuzzy Probability Theory, James P. Dunyak, Ihab W. Ssad, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.