Digital Commons Network^™

Women Authors Of Technical Writing Textbooks From 1923 To 1973, Melissa Nicole Wampler

Masters Theses

"The published histories of technical writing textbooks do not usually include many women-authored textbooks. To find out why women-authored textbooks have been marginalized in these pedagogical histories, I selected seven women-authored textbooks and four men-authored textbooks published from 1923 to 1973, investigated the backgrounds of the authors and key features of their textbooks, and used the collected data to compare the women-authored textbooks to the men-authored textbooks. I was not able to find any reason why the women-authored textbooks have been or should be marginalized in histories of technical writing textbooks; however, my study had several limitations. My thesis begins …

Broad-Spectrum Antibacterial Properties Of Metal-Ion Doped Borate Bioactive Glasses For Clinical Applications, Megan Ottomeyer

Masters Theses

"Bioactive glasses with antimicrobial properties can be implemented as coatings on medical devices and implants, as well as a treatment for tissue repair and prevention of common hospital-acquired infections such as MRSA A borate-containing glass, B3, is also undergoing clinical trials to assess wound-healing properties. The sensitivities of various bacteria to B3, B3-Ag, B3-Ga, and B3-I bioactive glasses were tested. In addition, the mechanism of action for the glasses was studied by spectroscopic enzyme kinetics experiments, Live-Dead staining fluorescence microscopy, and luminescence assays using two gene fusion strains of Escherichia coli.

It was found that gram-positive bacteria were more …

Manual Modification And Plasma Exposure Of Boron Nitride Ceramic To Study Hall Effect Thruster Plasma Channel Material Erosion, Alexander J. Satonik

Masters Theses

"Worn Hall effect thrusters (HET) show a variety of unique microstructures and elemental compositions in the boron nitride thruster channel walls. Worn thruster channels are typically created by running test thrusters in vacuum chambers for hundreds of hours. Studies were undertaken to manually modify samples of boron nitride without the use of a hall effect thruster. Samples were manually abraded with an abrasive blaster and sandpaper, in addition to a vacuum heater. Some of these samples were further exposed to a xenon plasma in a magnetron sputter device. Sandpaper and abrasive blaster tests were used to modify surface roughness values …

Quantization Noise Analysis Of A Closed-Loop Pwm Controller That Includes Σ-Δ Modulation, Anupama Balakrishnan

Masters Theses

"Σ-Δ modulation is a popular noise shaping technique which is used to move the quantization noise out of the frequency band of interest. Recently, a number of authors have applied this technique to a pulse width modulation (PWM) controller for switching power converters. However, previous analysis has not incorporated the effects of analog-to-digital converter (ADC) resolution or feedback control on the Σ-Δ modulator. In this work, quantization due to ADC resolution and PWM resolution are analyzed, considering the effects of noise-shaping and feedback. A number of simulations have been performed to explore the impact of various design choices on output …

Security Analysis Of A Cyber Physical System : A Car Example, Jason Madden

Masters Theses

"Deeply embedded Cyber Physical Systems (CPS) are infrastructures that have significant cyber and physical components that interact with each other in complex ways. These interactions can violate a system's security policy, leading to the leakage of rights and unintended information flow. This thesis will explore information flow as it uses a public channel. In order to exemplify the use of the public channel, a vehicle being composed of the computer system and its operators will show how information is disclosed to an observer. The example is made up of a vehicle traveling across some terrain with an observer watching the …

Parameter Optimization For Controlling Aluminum Loss When Laser Depositing Ti-6al-4v, Richard Charles Barclay

Masters Theses

"The ability to predict the mechanical properties of engineering materials is crucial to the manufacturing of advanced products. In the aerospace industry, Ti-6Al-4V is commonly used to build structures. Any deviation from the alloy's standard properties can prove detrimental. Thus, the compositional integrity of the material must be controlled. The ability to directly build and repair large, complicated structures directly from CAD files is highly sought after. Laser Metal Deposition (LMD) technology has the potential to deliver that ability. Before this process can gain widespread acceptance, however, a set of process parameters must be established that yield finished parts of …

Robust Methods For Construction Of Global Potential Energy Surfaces, Phalgun Lolur

Masters Theses

"This thesis is about the development of robust methods for construction of global potential energy surfaces to study the spectroscopy and dynamics of molecular systems. A potential energy surface represents the electronic energy of a molecule as a function of its geometry. This is central to how chemists view molecular systems in terms of motion across a rich energy landscape where barriers separate wells corresponding to different stable structures. The range of molecular distortions defines the potential energy surface. Computing the potential energy surface of a molecule has become a fundamental operation in modern theoretical chemistry studies. The Born-Oppenheimer approximation …

A Modification Of Freeze-Core Technology For Collecting Granular Fluvial Sediment Samples, David Charles Smith

Masters Theses

"The presence of coarse grained sediment can potentially reduce the effectiveness of conventional sampling methods in recovering fluvial sediments. A modification to freeze-core technology was used to collect fine grained sediments for the purpose of characterizing the extent of heavy metal contamination in fluvial deposits that contain significant amounts of coarse-grained material such as cobbles and boulders. This material greatly reduces the effectiveness of conventional sampling methods. This method uses 2.5-cm and 2.9-cm diameter by 30-cm long finned samplers that were mechanically- and hand-driven into the ground. The sediment is frozen to the outside of the sampler by injecting liquid …

Immersed Finite Element Method For Interface Problems With Algebraic Multigrid Solver, Wenqiang Feng

Masters Theses

"This thesis is to discuss the bilinear and 2D linear immersed finite element (IFE) solutions generated from the algebraic multigrid solver for both stationary and moving interface problems. In contrast to the body-fitting mesh restriction of the traditional finite element methods or finite difference methods for interface problems, a number of numerical methods based on structured meshes independent of the interface have been developed. When these methods are applied to the real world applications, we often need to solve the corresponding large scale linear systems many times, which demands efficient solvers. The algebraic multigrid (AMG) method is a natural choice …

Fabry-Perot Interferometer Based Co₂ Sensor Using Ionic-Liquid, Mujahid Abdul

Masters Theses

"Anthropogenic greenhouse gas emission has become an eminent problem today especially CO₂ gas emission is of major importance. Statistics show that CO₂ concentration is consistently increasing in atmosphere every year. Having cognizance of this problem, better CO₂ absorbents, ionic liquids, has been suggested through this thesis. To prove Ionic liquid's efficiency, a unique sensor was developed by a sophisticated fabrication using Femto-second (fs) laser. Sensor is built to work as an extrinsic Fabry-Perot Interferometer (EFPI) to sense CO₂. EFPI sensor consists of a glass tube fused between two single mode fibers, and a miniature hole is fabricated in the tube …

Wolf Creek Dam: A Case Study Of Foundation Remediation For Dams Built On Karst Foundations, Kyla Justene Erich

Masters Theses

"Wolf Creek Dam was completed in 1952 as a 5,736-foot long and 258-foot high combination embankment-concrete gravity dam. Its storage capacity of 6 million acre feet makes it the ninth largest reservoir in the nation. The dam was built on a heavily karstified limestone foundation and began exhibiting signs of excess foundation seepage in late 1967. This led to extensive corrective work in the 1970s beneath the earthen core of the embankment to reduce underseepage. In 2006 an independent assessment by the Dam Safety Action Classification (DSAC) Peer Review Panel recommended that Wolf Creek Dam exhibited "Urgent and Compelling" foundation …

A New Approach To Nuclear Safeguard Enhancement Through Radionuclide Profiling, Aaron Dawon Peterson

Masters Theses

"The United States has led the effort to promote peaceful use of nuclear power amongst states actively utilizing it as well as those looking to deploy the technology in the near future. With the attraction being demonstrated by various countries towards nuclear power comes the concern that a nation may have military aspirations for the use of nuclear energy. The International Atomic Energy Agency (IAEA) has established nuclear safeguard protocols and procedures to mitigate nuclear proliferation. The work herein proposed a strategy to further enhance existing safeguard protocols by considering safeguard in nuclear fuel design. The strategy involved the use …

Search-Based Model Summarization, Lokesh Krishna Ravichandran

Masters Theses

"Large systems are complex and consist of numerous components and interactions between the components. Hence managing such large systems is a cumbersome and time consuming task. Large systems are usually described at the model level. But the large number of components in such models makes it difficult to modify. As a consequence, developers need a solution to rapidly detect which model components to revise. Effective solution is to generate a model summary. Although existing techniques are powerful enough to provide good summaries based on lexical information (relevant terms), they do not make use of structural information (component structure) well. In …

A Computational Study Of Driven Micro-Cavities In Supersonic Flat Plate Flow, Thomas Ryan Rehmeier

Masters Theses

"Driven micro-cavities embedded in the wall beneath turbulent supersonic boundary layers are analyzed using two-dimensional computational fluid dynamics. This concept is a passive flow control technique in which very small cavities formed by arrays of thin vertical walls are oriented transverse to the flow direction and underlie the boundary layer. The purpose is to reduce or eliminate skin friction drag. Various micro-cavity configurations were analyzed at locations (0.1 m and 1 m) downstream of the leading edges of flat plates, for free-stream Mach numbers of 1.2, 2.0, and 3.0. Results focus on net drag reduction achieved, cavity flow-field effects, perforation …

Effect Of Mix Parameters On Longevity Of Bituminous Mixtures, Clayton Reichle

Masters Theses

"This study was performed to evaluate the effects of varying aggregate sources, aggregate gradations on the stripping and rutting potential of bituminous based plant mixes specified by the Missouri Department of Transportation. The different aggregate combinations included two different aggregate sources (Potosi Dolomite and Jefferson City Dolomite) including two variations for the Jefferson City Dolomite mix to simulate a marginally in-specification mix and an out-of-specification but in-field tolerance mix. The "field" mix simulated the marginal mix where field tolerance of high dust and low binder content were maximized. All three mixes were evaluated for stripping susceptibility using the Tensile Strength …

Hybridizing And Applying Computational Intelligence Techniques, Jeffery Scott Shelburg

Masters Theses

"As computers are increasingly relied upon to perform tasks of increasing complexity affecting many aspects of society, it is imperative that the underlying computational methods performing the tasks have high performance in terms of effectiveness and scalability. A common solution employed to perform such complex tasks are computational intelligence (CI) techniques. CI techniques use approaches influenced by nature to solve problems in which traditional modeling approaches fail due to impracticality, intractability, or mathematical ill-posedness. While CI techniques can perform considerably better than traditional modeling approaches when solving complex problems, the scalability performance of a given CI technique alone is not …

Liquid Phase Sintering Of 20bi(Zn₀.₅Ti₀.₅)O₃-80batio₃ Dielectrics With Bismuth-Zinc-Borate And Bismuth Borosilicate Glasses, David I. Shahin

Masters Theses

"Dielectrics in the Bi(Zn₀.₅Ti₀.₅O₃-BaTiO₃ system (specifically 20BZT-80BT, in mol%) are promising candidates for high energy density capacitor applications due to broad temperature-dependent dielectric constant maxima and a relatively field-independent permittivity. Bulk samples require sintering temperatures of greater than 1180ºC to reach useful densities. Due to incompatibility of Bi with low-pO₂ processing, BZT-BT-based multilayer capacitors must utilize noble metal electrodes that resist oxidation during sintering. Sintering temperatures must be reduced to allow use of less expensive electrode materials (Cu, etc.). This work studies the reduced temperature sintering behavior and dielectric properties of BZT-BT sintered with 30 Bi₂O₃-30ZnO-40B₂O₃ and 50Bi₂O₃-25B₂O₃-25SiO₂ (mol%) liquid …

Secure Design Defects Detection And Correction, Wenquan Wang

Masters Theses

"Bad design and software defects often make source codes hard to understand and lead to maintenance difficulties. In order to detect and fix such defects, researchers have systematically investigated these issues and designed different effective algorithms to tackle the problems. However, most of these methods need source codes/models for defect detection and correction. Commercial companies, like banks, may not be willing to provide their source models due to data security. Therefore, it is a huge challenge to detect software detects by a consulting company as well as to keep source models confidential. This thesis analyze security issues in existing approaches …

Lexis In Chemical Engineering Discourse: Analyzing Style In Chemical Engineering Research Articles Through A Rhetorical Lens, David Lamar Young

Masters Theses

"This study examines the style of chemical engineering research articles to discover stylistic trends that may be applicable to authors looking to publish their own research. Rhetorical stylistic analysis was used as a research method to allow for thorough analysis of all articles in the sample. Ten research articles from the two prominent chemical engineering journals were chosen using specific criteria to constitute a sample of articles that could most accurately represent the population of chemical engineering research articles. Each article was then analyzed line by line to identify markers of chemical engineering research article style, including the following: ▬Use …

New Sensorless, Efficient Optimized And Stabilized V/F Control For Pmsm Machines, Seyed Hesam Jafari

Masters Theses

"With the rapid advances in power electronics and motor drive technologies in recent decades, permanent magnet synchronous machines (PMSM) have found extensive applications in a variety of industrial systems due to its many desirable features such as high power density, high efficiency, and high torque to current ratio, low noise, and robustness. In low dynamic applications like pumps, fans and compressors where the motor speed is nearly constant, usage of a simple control algorithm that can be implemented with least number of the costly external hardware can be highly desirable for industry. In recent published works, for low power PMSMs, …

Communication Protocols For Integrated Fiber Optic Sensor Interrogator, Tameem Ahmed Khan

Masters Theses

"Fiber optic sensors have gained rapid recognition in sensing environmental factors such as strain, stress, acoustics, pressure, temperature among emerging other sensing applications. Major advantages of fiber based systems are small size, light weight, multiplex-ability of sensors on a single fiber, and immunity to Radio Frequency (RF) interference. However, single most major disadvantage of such technology is that traditionally the interrogation systems are typically bulky and heavy lab only equipment. Embed-ability of sensors into different structures and environments requires that the whole systems (sensors + interrogator) be small, modular and portable. This thesis presents such a custom Fiber optic Sensor …

Production Of 1,3-Propanediol From Glycerol Under Haloalkaline Conditions By Halanaerobium Hydrogeniformans, Daniel William Roush

Masters Theses

"With increased demands around the world to make modern lifestyles more environmentally friendly, the chemical commodity market has rapidly shifted. Through new technologies in chemical production, certain high value products have oversaturated the market and have become high-volume, low value waste products. The expansion of biodiesel production offers a prime example; high volumes of glycerol byproduct from this process have shifted glycerol from a high priced commodity to a common waste product. A number of microorganisms are known to synthesize the polymeric precursor 1,3-propanediol from glycerol; however, crude glycerol from biodiesel production creates a harsh environment for most microbes, and …

Harmonic Compensation In A Grid Using Doubly Fed Induction Generators, Omkar Amol Ghatpande

Masters Theses

"Ideally, electric utilities are expected to deliver a sinusoidal voltage with a constant rated frequency, while customers are expected to draw a sinusoidal current with unity power factor. The recent widespread use of harmonic producing equipment in industrial applications, especially non-linear loads, has increased the distortion of electric currents and voltages in transmission and distribution systems. This thesis proposes a method of using multiple reference frame theory for measuring and mitigating harmonic currents of nonlinear loads using a doubly fed induction generator. The most significant low-order harmonics to be compensated are calculated using a multiple reference frame harmonic observer. This …

Insufficient Ct Data Reconstruction Based On Directional Total Variation (Dtv) Regularized Maximum Likelihood Expectation Maximization (Mlem) Method, Fahima Fahmida Islam

Masters Theses

"Sparse tomography is an efficient technique which saves time as well as minimizes cost. However, due to few angular data it implies the image reconstruction problem as ill-posed. In the ill posed problem, even with exact data constraints, the inversion cannot be uniquely performed. Therefore, selection of suitable method to optimize the reconstruction problems plays an important role in sparse data CT. Use of regularization function is a well-known method to control the artifacts in limited angle data acquisition. In this work, we propose directional total variation regularized ordered subset (OS) type image reconstruction method for neutron limited data CT. …

Tensile Failure During Structural Development Of Single-Layer Buckle Folds, Xiaolong Liu

Masters Theses

"Folds and fold trains of sedimentary strata are among the most common structural traps systems for hydrocarbon reservoirs. The existence of tensile fractures associated to buckle folding is associated to the distribution of extensional strain in the outer arc of the fold hinges. This study investigates the conditions under which tensile stresses develop due to buckling in a realistic in situ stress scenario. By applying a 2D finite element modeling approach, the influence of realistic mechanical stratigraphy (including strain rate, overburden depth, competence contrasts, viscosity, and permeability) on the development of single-layer buckle folds with Newtonian viscous rheology is studied. …

Role Of Nicotine In Oxidative Stress, Rakesh Kacham

Masters Theses

"Nicotine, a major alkaloid, is present in tobacco products as well as in smaller amounts in potatoes, tomatoes, and eggplants. Although it is the addictive compound in cigarettes, nicotine is believed to play a protective role in neurodegenerative disorders such as Parkinson's disease. Researchers have found that the short-term administration of nicotine may help improve the memory process by reducing oxidative stress in the brain. Our studies have shown that, by blocking Fenton's reaction, nicotine is able to inhibit free radical generation, so this research has focused on the antioxidant properties of nicotine. The cell lines of the alveoli, blood …

Constructing Conducted Emission Models For Integrated Circuits, Shuai Jin

Masters Theses

"Conducted emissions, noise conducted out of integrated circuit pins, play an important role in determining the system level EMC performance. Characterizing conducted emissions from ICs is investigated and the corresponding noise models are developed in this thesis. Both simulation IBIS and measurement based methods for noise-model construction are studied. The constructed noise source model for a test IC is applied in system-level simulations and the calculated far field radiation is validated with measurements. The agreement in the simulated and measured results demonstrates the effectiveness of the constructed model for characterizing the conducted emissions from an IC I/O pin"--Abstract, page iii.

Trough-Silicon-Via Inductor: Is It Real Or Just A Fantasy?, Rongbo Yang

Masters Theses

"Through-silicon-vias (TSVs) can potentially be used to implement inductors in three-dimensional (3D) integrated system for minimal footprint and large inductance. However, different from conventional 2D spiral inductor, TSV inductors are buried in lossy substrate, thus suffering from low quality factors. This thesis presents how various process and design parameters affect their performance. A few interesting phenomena that are unique to TSV inductors are observed. We then proposed a novel shield mechanism utilizing the micro-channel, a technique conventionally used for heat removal, to reduce the substrate loss. The technique increases the quality factor and inductance of the TSV inductor by up …

Modeling Of Fracture And Durability Of Paste-Bonded Composite Joints Subjected To Hygro-Thermal-Mechanical Loading, David Lee Harris

Masters Theses

"The objective of the research is to characterize the behavior of composite/composite joints with paste adhesive using both experimental testing and analytical modeling. In comparison with the conventional tape adhesive, joining composites using paste adhesive provides several advantages. The carbon fiber laminate material systems employed in this study included IM7 carbon fibers and 977-3 epoxy matrix assembled in prepreg tape, and AS4 carbon fibers and 977-3 epoxy matrix as a five-harness satin weave. The adhesive employed was EA 9394 epoxy. All laminates and test specimens were fabricated and inspected by Boeing using their standard propriety procedures. Three types of test …

Bio-Inspired Design, Fabrication And Testing Of Bipolar Plates For Pem Fuel Cells, Nannan Guo

Doctoral Dissertations

"The flow field of a bipolar plate distributes reactants for polymer electrolyte membrane (PEM) fuel cells and removes the produced water from the fuel cells. It greatly influences the performance of fuel cells, especially the concentration losses. Two approaches were developed to improve flow field designs in this dissertation. One is inspired by the biological circulatory structures and called bio-inspired designs, which have great potential to transport reactant efficiently and hence improve fuel cell performance. Another way is using a network-based optimization model to optimize the conventional flow field configurations, i.e., pin-type, parallel and serpentine designs, to improve flow distributions …