Digital Commons Network^™

Missouri S&T Magazine Fall/Winter 2014, Missouri S&T Marketing And Communications Department, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

Neuropathology And Genetics Of Cerebroretinal Vasculopathies, Grant R. Kolar, Parul H. Kothari, Negar Khanlou, Joanna C. Jen, Robert E. Schmidt, Harry V. Vinters

Biological Sciences Faculty Research & Creative Works

Cerebroretinal vasculopathy (CRV) and the related diseases hereditary endotheliopathy with retinopathy, neuropathy, and stroke (HERNS), hereditary vascular retinopathy (HVR) and hereditary systemic angiopathy (HSA) [subsequently combined as retinovasculopathy and cerebral leukodystrophy (RVCL)] are devastating autosomal-dominant disorders of early to middle-age onset presenting with a core constellation of neurologic and ophthalmologic findings. This family of diseases is linked by specific mutations targeting a core region of a gene. Frameshift mutations in the carboxyl-terminus of three prime exonuclease-1 (TREX1), the major mammalian 3' to 5' DNA exonuclease on chromosome 3p21.1-p21.3, result in a systemic vasculopathy that follows an approximately 5-year course leading …

First Demonstration Of Ultra-Thin Sige-Channel Junctionless Accumulation-Mode (Jam) Bulk Finfets On Si Substrate With Pn Junction-Isolation Scheme, Donghyun Kim, Tae Kyun Kim, Young Gwang Yoon, Byeong Woon Hwang, Yang-Kyu Choi, Byung Jin Cho, Seok-Hee Lee

Electrical and Computer Engineering Faculty Research & Creative Works

A SiGe-channel junctionless-accumulation-mode (JAM) PMOS bulk FinFETs were successfully demonstrated on Si substrate with PN junction-isolation scheme for the first time. The JAM bulk FinFETs with fin width of 18 nm exhibits excellent subthreshold characteristics such as subthreshold swing of 64 mV/decade, drain-induced barrier lowering (DIBL) of 40 mV/V and high I_on/I_off current ratio ( > 1 x 10⁵). The change of substrate bias from 0 to 5 V leads to the threshold voltage shift of 53 mV by modulating the effective channel thickness. When compared to the Si-channel bulk FinFETs with fin width of 18 …

Experimental Characterization Of Optical Nonlocalities In Metal-Dielectric Multilayer Metamaterials, L. Sun, F. Cheng, C. J. Mathai, S. Gangopadhyay, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Measurement Of Stiffness Anisotropy In Kaolinite Using Bender Element Tests In A Floating Wall Consolidometer, X. Kang, G. C. Kang, B. Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A new floating wall consolidometer-type bender element testing system was developed to study the stiffness anisotropy of clays at applied vertical stresses up to 800 kPa. One-dimensional slurry-consolidated Georgia RP-2 kaolinite samples, prepared with 0.005 and 1 mol/l NaCl solutions, were tested in this system. A floating wall design eliminated the detrimental bending moment that acts upon the horizontally installed benders as a result of soil settlement in a traditional fixed wall setup, which significantly improved the signal quality and bender reuse. Floating wall-soil interface resistance was quantified with pulling tests. Analytical equations were then derived to calculate the wall …

Corrosion Resistance Of A Sand Particle-Modified Enamel Coating Applied To Smooth Steel Bars, Fujian Tang, Genda Chen, Richard K. Brow, Michael L. Koenigstein

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The protective performance of a sand particle-modified enamel coating on reinforcing steel bars was evaluated in 3.5 wt% NaCl solution by electrochemical impedance spectroscopy (EIS). Seven percentages of sand particles by weight were investigated: 0%, 5%, 10%, 20%, 30%, 50% and 70%. The phase composition of the enamel coating and sand particles were determined with the X-ray diffraction (XRD) technique. The surface and cross-sectional morphologies of the sand particle-modified enamel coating were characterized using scanning electron microscopy (SEM). XRD tests revealed three phases of sand particles: SiO₂, CaCO₃ and MgCO₃. SEM images demonstrated that the …

The Effects Of Electrode Size And Configuration On Plasma Actuator Thrust And Effectiveness At Low Pressure, Paul Daniel Friz, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Transmit Designs For The Mimo Broadcast Channel With Statistical Csi, Yongpeng Wu, Shi Jin, Xiqi Gao, Matthew R. Mckay, Chengshan Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

We investigate the multiple-input multiple-output broadcast channel with statistical channel state information available at the transmitter. The so-called linear assignment operation is employed, and necessary conditions are derived for the optimal transmit design under general fading conditions. Based on this, we introduce an iterative algorithm to maximize the linear assignment weighted sum-rate by applying a gradient descent method. To reduce complexity, we derive an upper bound of the linear assignment achievable rate of each receiver, from which a simplified closed-form expression for a near-optimal linear assignment matrix is derived. This reveals an interesting construction analogous to that of dirty-paper coding. …

Stochastic Optimal Design For Unknown Linear Discrete-Time System Zero-Sum Games In Input-Output Form Under Communication Constraints, Hao Xu, S. Jagannathan, F. L. Lewis

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, stochastic optimal strategy for unknown linear discrete-time system quadratic zero-sum games in input-output form with communication imperfections such as network-induced delays and packet losses, otherwise referred to as networked control system (NCS) zero-sum games, relating to the H∞ optimal control problem is solved in a forward-in-time manner. First, the linear discrete-time zero sum state space representation is transformed into a linear NCS in the state space form after incorporating random delays and packet losses and then into the input-output form. Subsequently, the stochastic optimal approach, referred to as adaptive dynamic programming (ADP), is introduced which estimates the …

Simplified Parallel Interference Cancelation For Underdetermined Mimo Systems, Chen Qian, Jingxian Wu, Yahong Rosa Zheng, Zhaocheng Wang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a low-complexity detection scheme is proposed for an underdetermined multiple-input-multiple-output (UD-MIMO) wireless communication system that employs N transmit antennas and M < N receive antennas. The proposed scheme combines a simplified parallel interference cancelation (S-PIC) with the block decision feedback equalization (BDFE) algorithm. To account for the extra (N - M)-dimension in the transmitted signal, the UD-MIMO system is partitioned into two subsystems: one with (N - M) transmit antennas and the other one with M transmit antennas. The interference from the first subsystem to the second one is canceled in parallel, and BDFE is performed over the second subsystem. Unlike conventional PIC methods that exhaustively search all the Q (N - M) sequences in the first subsystem, with Q being the constellation size, the proposed scheme explores only a small number of candidate sequences in the first subsystem; thus, it achieves significant complexity reduction. Two new candidate sequence selection methods are proposed. In the first iteration, the candidate sequences used for PIC are selected by exploring the statistical properties of the received signals. In the second iteration and beyond, the set containing the candidate sequences is constructed by utilizing the soft information generated from the previous iteration. The proposed scheme provides a balanced tradeoff between computational complexity and bit error rate (BER) performance.

Geophysical Signatures Of Disseminated Iron Minerals: A Proxy For Understanding Subsurface Biophysicochemical Processes, Gamal Z. Abdel Aal, Estella A. Atekwana, Andre Revil

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Previous studies have linked biogeophysical signatures to the presence of iron minerals resulting from distinct biophysicochemical processes. Utilizing geophysical methods as a proxy of such biophysicochemical processes requires an understanding of the geophysical signature of the different iron minerals. Laboratory experiments were conducted to investigate the complex conductivity and magnetic susceptibility signatures of five iron minerals disseminated in saturated porous media under variable iron mineral content and grain size. Both pyrite and magnetite show high quadrature and inphase conductivities compared to hematite, goethite, and siderite, whereas magnetite was the highly magnetic mineral dominating the magnetic susceptibility measurements. The quadrature conductivity …

No Really, (Crowd) Work Is The Silver Bullet, Andrew Schriner, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Humanitarian assistance has been on the global conscience for approximately 70 years (since WWII), and yet in 2010 2.4 billion people still lived on less than $2 per day. As Easterly has pointed out: to see where we went wrong, just look at the incentives. To create true sustainable economic change requires realignment of incentives, particularly the incentive to work and invest. Employment is fundamentally required, and crowd work is the current best hope for providing that employment quickly, with global reach, and at scale. This approach is grassroots, bottom-up, and puts the income directly in the hands of people …

Phase Transitions On Random Lattices: How Random Is Topological Disorder?, Hatem Barghathi, Thomas Vojta

Physics Faculty Research & Creative Works

We study the effects of topological (connectivity) disorder on phase transitions. We identify a broad class of random lattices whose disorder fluctuations decay much faster with increasing length scale than those of generic random systems, yielding a wandering exponent of ω = (d−1)/(2d) in d dimensions. The stability of clean critical points is thus governed by the criterion (d+1)ν > 2 rather than the usual Harris criterion dν > 2, making topological disorder less relevant than generic randomness. The Imry-Ma criterion is also modified, allowing first-order transitions to survive in all dimensions d > 1. These results explain a host of puzzling violations …

Strong-Disorder Magnetic Quantum Phase Transitions: Status And New Developments, Thomas Vojta

Physics Faculty Research & Creative Works

This article reviews the unconventional effects of random disorder on magnetic quantum phase transitions, focusing on a number of new experimental and theoretical developments during the last three years. On the theory side, we address smeared quantum phase transitions tuned by changing the chemical composition, for example in alloys of the type A_1-xB_x. We also discuss how the interplay of order parameter conservation and overdamped dynamics leads to enhanced quantum Griffiths singularities in disordered metallic ferromagnets. Finally, we discuss a semiclassical theory of transport properties in quantum Griffiths phases. Experimental examples include the ruthenates Sr_{1-x …}

Sex And Basic Science. A Title Ix Position, Kathryn Sandberg, Joseph G. Verbalis, Gina L.C. Yosten, Willis K. Samson

Biological Sciences Faculty Research & Creative Works

No abstract provided.

Finite-Size Effects On Molecular Dynamics Interfacial Thermal-Resistance Predictions, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Molecular Dynamics Simulations, We Study the Role of Finite Size Effects on the Determination of Interfacial Thermal Resistance between Two Solids Characterized by High Phonon Mean Free Paths. in Particular, We Will Show that a Direct, Heat Source-Sink Method Leads to Strong Size Effect, Associated with Ballistic Phonon Transport to and From, and Specular Reflections at the Simulation Domain Boundary. Lack of Proper Account for These Effects Can Lead to Incorrect Predictions About the Role of Interfacial Bonding and Structure on Interfacial Thermal Resistance. We Also Show that the Finite Size Effect Can Be Dramatically Reduced by Introduction of …

Thermal Transport Across A Substrate-Thin-Film Interface: Effects Of Film Thickness And Surface Roughness, Zhi Liang, Kiran Sasikumar, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Molecular Dynamics Simulations and a Model AlN-GaN Interface, We Demonstrate that the Interfacial Thermal Resistance RK (Kapitza Resistance) between a Substrate and Thin Film Depends on the Thickness of the Film and the Film Surface Roughness When the Phonon Mean Free Path is Larger Than Film Thickness. in Particular, When the Film (External) Surface is Atomistically Smooth, Phonons Transmitted from the Substrate Can Travel Ballistically in the Thin Film, Be Scattered Specularly at the Surface, and Return to the Substrate Without Energy Transfer. If the External Surface Scatters Phonons Diffusely, Which is Characteristic of Rough Surfaces, RK is Independent …

A Mechanical Testing Methodology For Additive Manufacturing Processes, Sujitkumar Dongare, Todd E. Sparks, Joseph William Newkirk, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most additive manufacturing processes are layer-by-layer deposition, thus its mechanical properties could be very different than those made from traditional manufacturing processes. This paper summarizes a mini-tensile testing methodology for additive manufacturing. Research concerning the tensile testing of metallic material has been conducted and test methods have been defined. It encompasses the methods for determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area. The study of positional variation and cooling-rate dependency in case of additive manufacturing proves to be expensive and time consuming with the full-size test specimens. Thus, this paper discussed a technique for …

Investigation Of Forged-Like Microstructure Produced By A Hybrid Manufacturing Process, Romy Francis, Joseph William Newkirk, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser Metal Deposition (LMD) is an additive manufacturing technique for manufacturing complex near net shaped components. The grain size of the typical deposition microstructure in case of Ti-6Al-4V can range between 100µm-600µm, which is much larger than that of forged-like microstructures. Friction Stir Processing (FSP) has been investigated as a method for surface modification to form refined microstructure at the surface of the Ti-6Al-4V components manufactured from the LMD method. Integration of FSP and LMD can greatly improve the product properties. Friction stir processing of the laser deposited Ti-6Al-4V deposits was performed and optimum processing parameters were obtained using this …

Stereo Vision Based Hybrid Manufacturing Of Ti-6al-4v In Component Repair Process, Renwei Liu, Zhiyuang Wang, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Parts or products from high performance metal are very expensive, partly due to the processing complexities during manufacturing. Recent studies have indicated that hybrid processes of additive manufacturing and machining process can be used to repair titanium parts, thus extending the service life. In order to implement these methods automatically, it is necessary to obtain the spatial geometry information of component with defects to generate the tool path. The purpose of this paper is to summarize the research on hybrid manufacturing with stereo vision function which can be applied to the component repair process. Stereo vision is adopted to detect …

Investigation Of Sparse-Build Rapid Tooling By Fused Deposition Modeling, Osman Iyibilgin, Ming-Chuan Leu, Gregory Taylor, H. Li, K. Chandrashekhara

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper describes the investigation of sparse-build tooling by Fused Deposition Modeling (FDM®) aimed at rapid tooling with reduction in the amount of material. Sparse-build test coupons having ULTEM as the material and varying air gap (sparse spacing), wall thickness, and cap thickness were fabricated using the sparse and sparse-double dense build styles of the Stratasys Fortus machine. The strengths and moduli of these coupons were measured in compression and flexure tests. The strength/mass ratio and modulus/mass ratio were compared among the various coupons, as well as with solid coupons, to investigate the effects of the two build styles and …

In Vitro Assessment Of Laser Sintered Bioactive Glass Scaffolds With Different Pore Geometries, Krishna C. R. Kolan, Albin Thomas, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The pore geometry of bioactive glass scaffolds intended for use in bone repair or replacement is one of the most important parameters that could determine the rate of bone regeneration. The pore geometry would also affect the mechanical properties of the scaffolds and their rate of degradation. Scaffolds with five different architectures, having ~50% porosity, were fabricated with silicate (13–93) and borate (13–93B3) based bioactive glasses using a laser sintering process. An established, late-osteoblasts/early-osteocytes cell line was used to perform cell proliferation tests on the scaffolds. The results indicated that the cells proliferate significantly more on the scaffolds which mimic …

Thermographic Investigation Of Laser Metal Deposition, Sreekar Karnati, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Primitive stages of studies on and with additive manufacturing techniques popularly involve thin wall geometry. In the current effort attempts were made to capture various thermal aspects during deposition of a thin wall geometry. The thermo-graphic data was captured using a FLIR A615 infrared camera. Post processing using edge detection algorithms and image processing techniques, the geometric and thermal aspects of meltpool and tail of the meltpool were obtained. The effect of geometry and power on shape of the meltpool and its tail were obtained. The depositions of SS 316 with varying power. These observations were discussed and analyzed in …

Rapidly Self-Renewing Human Multipotent Marrow Stromal Cells (Hmsc) Express Sialyl Lewis X And Actively Adhere To Arterial Endothelium In A Chick Embryo Model System, Harris E. Mcferrin, Scott D. Olson, Miriam V. Gutschow, Julie A. Semon, Deborah E. Sullivan, Darwin J. Prockop

Biological Sciences Faculty Research & Creative Works

Background: There have been conflicting observations regarding the receptors utilized by human multipotent mesenchymal bone marrow stromal cells (hMSC) to adhere to endothelial cells (EC). To address the discrepancies, we performed experiments with cells prepared with a standardized, low-density protocol preserving a sub-population of small cells that are rapidly self-renewing.

Methods: Sialyl Lewis X (SLeX) and α4 integrin expression were determined by flow cytometry. Fucosyltransferase expression was determined by quantitative realtime RT-PCR. Cell adhesion assays were carried out with a panel of endothelial cells from arteries, veins and the microvasculature in vitro. In Vivo experiments were performed to determine …

Increasing Energetic Cost Of Biosynthesis During Growth Makes Refeeding Deleterious, Chen Hou

Biological Sciences Faculty Research & Creative Works

Diet restriction (DR) enhances animals' health maintenance, but refeeding reverses its beneficial effects. However, to what degree refeeding reverses the beneficial effects of DR remains controversial. Here, I develop a theoretical model for reconciling the results of refeeding studies and understanding the dynamic and reversible mechanism underlying the effects of diet on health from the energetic viewpoint. By illustrating the negative correlation between health maintenance and the energetic cost of growth in animals under different diet regimes, the model explains why, in some cases, refed animals have better health and live longer than freely fed controls. More importantly, the model …

Fall 2014 E-Certi Newsletter, Center For Educational Research And Teaching Innovation

CAFE Faculty Newsletters

Hello S&T Instructors -- Welcome back to campus and a busy fall semester. In addition to new structures on the landscape, there are many new faces with dozens of new faculty arriving as well as a new provost and two vice provosts and deans. Read about a recent interview with Drs. Ferguson and Roberts as well as discover interesting facts about some award-winning colleagues.

Mantle Transition Zone Discontinuities Beneath The Contiguous United States, Stephen S. Gao, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Using over 310,000 high-quality radial receiver functions recorded by the USArray and other seismic stations in the contiguous United States, the depths of the 410 km and 660 km discontinuities (d410 and d660) are mapped in over 1,000 consecutive overlapping circles with a radius of 1⁰. The average mantle transition zone (MTZ) thickness for both the western and central/eastern U.S. is within 3 km from the global average of 250 km, suggesting an overall normal MTZ temperature beneath both areas. The Pacific Coast Ranges and the southern Basin and Range Province are underlain by a depressed d410, indicating higher-than-normal temperature …

Fine-Structure Constant For Gravitational And Scalar Interactions, Ulrich D. Jentschura

Physics Faculty Research & Creative Works

Starting from the coupling of a relativistic quantum particle to the curved Schwarzschild space time, we show that the Dirac-Schwarzschild problem has bound states and calculate their energies including relativistic corrections. Relativistic effects are shown to be suppressed by the gravitational fine-structure constant α_G=Gm₁m₂/(ℏc), where G is Newton's gravitational constant, c is the speed of light, and m₁ and m₂ ≫ m₁ are the masses of the two particles. The kinetic corrections due to space-time curvature are shown to lift the familiar (n,j) degeneracy of the energy levels of …

Effects Of Local Ph On The Formation And Regulation Of Cristae Morphologies, Dong Hoon Song, Jonghyun Park, Martin A. Philbert, Ann Marie Sastry, Wei Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Cristae, folded subcompartments of the inner mitochondrial membrane (IMM), have complex and dynamic morphologies. Since cristae are the major site of adenosine triphosphate synthesis, morphological changes of cristae have been studied in relation to functional states of mitochondria. In this sense, investigating the functional and structural significance of cristae may be critical for understanding progressive mitochondrial dysfunction. However, the detailed mechanisms of the formation and regulation of these cristae structures have not been fully elucidated. Among the hypotheses concerning the regulation of cristae morphologies, we exclusively investigate the effects of the local pH gradient on the cristae morphologies by using …

Seismic Imaging Of Mantle Transition Zone Discontinuities Beneath The Northern Red Sea And Adjacent Areas, A. A. Mohamed, Stephen S. Gao, A. A. Elsheikh, Kelly H. Liu, Youqiang Yu, R. E. Fat-Helbary

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The dramatic asymmetry in terms of surface elevation, Cenozoic volcanisms and earthquake activity across the Red Sea is an enigmatic issue in global tectonics, partially due to the unavailability of broad-band seismic data on the African Plate adjacent to the Red Sea. Here, we report the first comprehensive image of the mantle transition zone (MTZ) discontinuities using data from the Egyptian National Seismic Network, and compare the resulting depths of the 410 and 660-km discontinuities with those observed on the Arabian side. Our results show that when a standard earth model is used for time-to-depth conversion, the resulting depth of …