Digital Commons Network^™

Raft-Based Polymer And Nanoparticle Materials For Traumatic Brain Injury Treatment And Diagnostics, Aaron Priester

Doctoral Dissertations

"Traumatic brain injury (TBI) is a leading cause of death and disability worldwide. Neurodegenerative diseases that develop post-TBI can be, in part, attributed to DNA and cell-damaging reactive oxygen species (ROS) and lipid peroxidation products (LPOx). This thesis focused on overcoming the limits of current TBI material treatment approaches by employing a RAFT (reversible-addition fragmentation chain transfer) polymer approach that incorporated novel therapeutic, diagnostic and peptide-targeting monomers. An improved nanoparticle synthesis approach was also developed. Thiol and thioether-containing monomers neutralize both ROS and LPOx while Gd-containing monomers with enhanced magnetic resonance imaging (MRI) contrast provide diagnostics and material tracking in …

Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation, Jeremiah John Rittenhouse

Doctoral Dissertations

"Many engineering structures can be modeled as rectangular plates, including solar cells. Carefully controlled plate vibration can be useful to solve an engineering problem, such as lunar dust accumulation on solar cells, which blocks light and reduces power generation. For this application, plate vibration at resonance is studied and used experimentally to eject lunar dust from a solar cell.

Piezoelectric actuator placement on the inactive side of a solar cell to induce vibration dust mitigation from the active side of the cell is presented in this work. Three solar cell prototypes were created and tested for efficacy, resulting in an …

Atmospheric Transport Of Radionuclides, Meteorological Data Mining & Synthesis For Site Data Supplementation, Ben Yao Sonpon

Doctoral Dissertations

"This research aligns with the NRC's vision of implementing risk-informed decision-making to support its regulatory charter. The suite of tools developed includes automated procedures for data mining and extracting meteorological (met) data from various national and regional repositories. A second data analytics tool automates the process of data fusion into a uniform format while preserving data fidelity. Autocorrelations were then established, and correlation coefficients were calculated between the Callaway Nuclear Power Plant (Callaway) and nearby off-site weather stations. The complexity of these correlations depends on factors such as physical proximity, geographic features, and topology, potentially necessitating multivariate analysis (MVA). Furthermore, …

Lifelong Machine Learning With Adaptive Resonance Theory, Sasha Petrenko

Doctoral Dissertations

"This publication option dissertation is composed of three papers concerning the study of the problem lifelong machine learning with Adaptive Resonance Theory (ART) algorithms. Lifelong learning (L2) is a challenging machine learning paradigm that both encompasses and formalizes the fields of continual learning and incremental learning. The field is concerned with the mitigation of the phenomenon of catastrophic forgetting whereby learning agents that are faced with incrementally novel information deleteriously overwrite previous knowledge if that learning process is not regularized to counteract this consequence. ART algorithms solve this stability-plasticity dilemma by optimally assigning learning to categories or instantiating new knowledge …

Transport And Plugging Behavior Of Co2-Resistant Preformed Particle Gels In High Conductive Channels For Conformance Control, Adel Alotibi

Doctoral Dissertations

"Improving oil recovery is essential with rising global oil demand and declining production in mature fields. CO₂ flooding has been widely applied as a major Enhanced Oil Recovery (EOR) method due to its effectiveness in boosting oil recovery while enabling safe carbon storage in the subsurface. However, in fractured and highly heterogeneous reservoirs, CO₂ often flows through paths of least resistance, leading to early breakthrough or quick excessive CO₂ production and leaving substantial oil in unswept zones or areas. Traditional in-situ polymer gels have been applied to control CO₂ flooding conformance, their performance has been varied, …

Application Of Artificial Intelligence Techniques To Improve Leadership Decision Making With Uncertainty, Michael David Parrish

Doctoral Dissertations

"Every good leader is a good manager, but not every good manager is a good leader. The difference between the leader and the manager is critical decision-making. Today’s decision-making environment is characterized as Volatile, Uncertain, Complex, and Ambiguous (VUCA). With the exponential increase in the technical capabilities of systems, the human has become the weakest link in the use of such systems. To remain relevant, good leaders must continuously adapt to new advances in technology and processes.

The research contributions of this work provide several unique and novel solutions for leaders to utilize artificial intelligence tools to improve and optimize …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Experimental Investgation Of Core Fluid And Heat Transfer Of Pwr By Using Advanced Measurments Techniques, Saud Aldawood

Doctoral Dissertations

This comprehensive study investigates the thermal-hydraulic mechanisms and convective heat transfer characteristics within (PWRs), with a focus on (SMRs) under both single-phase and two-phase bubbly flow conditions. Specifically, the research investigates the complex bubble dynamics in two-phase flow rod bundles, which are crucial for understanding reactor behavior during loss-of-coolant accidents (LOCA). Employing an advanced experimental setup developed at the (mFReel) at MST, this work measures critical parameters such as void fraction, bubble passage frequency, bubble velocity, bubble chord length, and interfacial area concentration (IAC) using a four-tip optical probe across various locations in the rod bundle. The findings reveal that …

A Comprehensive Analysis Of Climate Resilience Strategies For Small Island Developing States, Ashley-Ann Davis

Doctoral Dissertations

Small Island Developing States (SIDS) face unique and disproportionate challenges in their efforts to achieve climate resilience due to their geographic vulnerabilities, limited resources, and systemic economic and social constraints. This dissertation provides a comprehensive analysis of climate resilience strategies tailored to SIDS, addressing critical systemic issues and exploring interdisciplinary solutions. It synthesizes findings across four interconnected studies, including an analysis of disaster preparedness and response mechanisms in developing countries to identify gaps and opportunities for improving resilience in extreme events. The research investigates economic factors influencing energy portfolio transitions in the Caribbean, emphasizing the complexities of renewable energy adoption. …

Application Of Gurney And Flight Of Fragment Calculations For Water Jet Velocities In Explosive Applications, Rachel L. Bauer, Tate B. Friedrich, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

This study investigates the application of Gurney and flight of fragment equations, typically used to predict metal fragment velocities, in modeling the water jet behavior. Three shotgun cartridge sizes were used as the energy source: 2.59 g, 5.83 g, and 7.13 g. Two configurations were tested: standard (full-barrel water load) and "negative 8" (partial water load). High-speed footage captured water column velocities, and Gurney models, including infinitely tamped and open-faced configurations, combined with the flight of fragment model were used to assess prediction accuracy. Results showed charge strength significantly affects water column velocity, with higher strengths yielding greater stability and …

Viscoelastic Materials Evaluated For Blast-Resistant Designs, M. Sutter, C. Thomas, A. D. Douglas, F. Dogan, C. E. Johnson

Mining Engineering Faculty Research & Creative Works

Viscoelastic materials have extensive military applications due to their energy absorption capabilities, with the potential to reduce blast energy imposed on buildings, vehicles, and personnel. Based on current literature, limited information is available regarding the mitigation of blast energy related to these uses. The impact of thickness, nanoparticle addition, and layering variation was assessed in this study using commercially available viscoelastic materials in open-air blasts of Composition C4 to determine shock energy mitigation capabilities. Time-pressure waveforms were recorded to identify optimal changes in shock wave characteristics: reduced peak pressure, positive phase duration, and impulse, with increased rise times. Results were …

Optimizing Hy Wet Ball Mill Efficiency Using Response Surface Methodology, Peng Chen, Ying Hou, Hongxu Lv, Ahmed Sobhy

Mining Engineering Faculty Research & Creative Works

This study uses response surface methodology (RSM) with a central composite design to optimize the HY wet ball mill work index. Key operational parameters—ore quantity, water addition, and media proportion—were systematically investigated. Variance analysis identified these factors as statistically significant (p < 0.0001), with ore quantity exhibiting the strongest influence (F value = 82.67). Optimal conditions (water addition: 1083.880 mL, media filling rate: 40.362%, ore quantity: 1827.130 g) achieved a minimum work index of 10.195 kW h t⁻¹. Validation tests confirmed the model's accuracy, yielding an average work index of 10.168 kW h t⁻¹ (deviation: 0.027 kW h t⁻¹). Compared to single-factor tests, RSM optimization reduced energy consumption by 3.76% (0.3975 kW h t⁻¹), translating to annual savings of $214,000 for a mid-sized processing plant. This demonstrates RSM's efficacy in …

Using Telemetry To Assess Operator Effects On Hydraulic Shovel Energy Efficiency. Part Ii: Assessing Operator Effects, Noah Adekunle Aluko, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

In this second part of a two-part series, this study investigates whether operator practices significantly affect the energy efficiency of hydraulic shovels, using detailed telemetry data. Rather than assuming this relationship, the research systematically tests it through a combination of statistical and regression analyses. First, Welch's and Kruskal–Wallis ANOVA confirm that operators differ significantly in their energy efficiency (p = 0.0000). Next, correlation analysis links parameters identified in Part I to energy per unit loading rate, and difference regression analysis determines which parameters most strongly influence efficiency variations. The results show that differences in payloads are the primary driver of …

Understanding The Usefulness Of Self-Escape Technologies In Underground Mining: Perspectives Of Metal/Nonmetal Miners, Eugene A. Gyawu, Kwame Awuah-Offei, D. A. Baker

Mining Engineering Faculty Research & Creative Works

Research on mine self-escape often focuses on coal mining, while perspectives from underground metal/nonmetal miners remain understudied despite their distinct emergency response challenges and unique operating environments. Using a scenario-based survey approach, this study evaluated underground metal/nonmetal miners' perceptions of the usefulness of 18 hypothetical self-escape interventions and how these perceptions are influenced by worker characteristics. Employment type was the strongest predictor of usefulness ratings, with hourly employees rating several self-escape interventions significantly higher than salaried employees, including those related to improving self-contained self-rescuers (SCSRs) and tethered guidance systems. The data suggested potential trends where perceived usefulness increased with more …

Evaluating Feasibility Of Incorporating Fuel Cell Drive Trains Into Existing Haul Trucks, Ayorinde Akinrinlola, Kwame Awuah-Offei, Abdullah Al Moinee

Mining Engineering Faculty Research & Creative Works

Hydrogen, as a fuel source in material handling, has become a viable option for achieving carbon reduction targets. The objective of this work was to apply vehicle drive train and energy simulation in MATLAB/Simulink to guide a discussion of the challenges and opportunities of incorporating hydrogen fuel cell drive trains into the current form factors of mine haul trucks. We built and validated a model based on the Komatsu 830-E truck and used it to estimate the hydrogen requirements for typical short-haul, medium-haul, and long-haul cycles; in the short-haul case (cycle time = 852 s) the truck consumed 23.6 L …

Optimizing Acid Mist Suppression: Unraveling Surfactant Effects On Bubble Formation And Bursting Dynamics In Copper Electrowinning, Ashish Kakoria, Mirza Muhammad Zaid, Aamir Iqbal, Ellen Amoako Afful, Guang Xu

Mining Engineering Faculty Research & Creative Works

The working mechanism of surfactant to reduce acid mist in copper electrowinning system is not well understood. Most of the studies are based on the surface tension reduction phenomenon but this is not the only function that causes acid mist reduction. In this paper, we investigated the effect of different surfactants on a bubble's residence time, terminal velocity, flow regime, and bursting dynamics using a high-speed camera. We have evaluated five different surfactants and found that the presence of surfactants reduces the terminal velocity, bubble diameter, and increases the residence time of the bubble in electrolyte. Especially for FC-1100, the …

Cracking The Code: Harnessing Serpentinization-Driven Micro-Crack Networks For Hydrogen Generation And Subsurface Resource Recovery, U. Mutlu, G. Boitnott, A. Lisjak, J. Ha, O. Mahabadi, P. Connolly, B. N. Tunnell, T. Sherizadeh, S. Nowak, J. E. Olson

Mining Engineering Faculty Research & Creative Works

This study focuses on simulating volume-increasing processes caused by natural hydrogen-generating serpentinization, a reaction in which olivine and pyroxene typically transform into serpentine minerals. The volume increase leads to crack propagation along grain interfaces and new crack generation within unreacted crystals (aka grains). The interplay between thermo-hydro-mechanicalchemical (THMC) conditions plays a critical role in the initiation, propagation, and coalescence of various fracture surfaces, which enhances permeability and can accelerate serpentinization and hydrogen production rates. In the scenarios considered, chemical reactions between formation brine and reactive minerals result in volumetric expansion, generating stress and promoting the propagation of micro-cracks. Our results …

Reliability Of Cazro3 And Mgo Capacitors At High Temperatures, Alan Devoe, Hung Trinh, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Calcium zirconate and magnesium oxide have both been found to have useful dielectric properties at high temperatures. Multilayer ceramic capacitors (MLCCs) were made with these dielectrics and platinum electrodes. The relationship between the lifespan (meantime to failure) and applied voltage was determined using Weibull statistics. CaZrO₃ capacitors were tested between 550°C and 600°C while MgO capacitors were tested between 600°C and 650°C. The temperature coefficient Ea and the voltage coefficient n of the Prokopowicz–Vaskas equation were determined under various test conditions. Activation energies for calcium zirconate and magnesium oxide were 3.25 eV and 3.48 eV, respectively. Resistance degradation of …

Empirical Study Of Far-Field Radio Frequency Wireless Power Transfer Testbed For Underground Mines Based On 1.8 Ghz, Anabi Hilary Kelechi, Samuel Frimpong

Mining Engineering Faculty Research & Creative Works

A novel 1.8 GHz far-field wireless power transfer (WPT) testbed was designed to achieve long-distance energy harvesting in underground mine (UM). Prior experimental studies confirm that underground mines experience 50 dB radio frequency (RF) signal attenuation compared to a typical wireless environment. Due to this severe signal attenuation, the currently proposed radio frequency energy harvesting (RF-EH) testbed cannot be deployed in underground mines. In this study, we proposed, designed and performed an empirical study with a military-grade class A radio frequency wireless power transfer (RF-WPT) testbed. The various digital modulation schemes experimented with included: BPSK, DBPSK, QPSK, OQPSK, Pi4DQPSK, 8PSK, …

Enhancing Safety In U.S. Coal Mines Through A Rib Support Recommendation Tool, Alper Kirmaci, Dakshith Ruvin Wijesinghe, Dogukan Guner, Kutay E. Karadeniz, Cameron Mitchell, Taghi Sherizadeh

Mining Engineering Faculty Research & Creative Works

Despite ongoing efforts to enhance coal rib stability, the underground coal mining sector continues to face incidents of rib failure, leading to injuries and fatalities. The development and validation of effective rib support systems are crucial for mitigating these risks. Unfortunately, a standardized design methodology that accommodates the diverse geological conditions of U.S. coal mines is missing. Current practices are often based on trial-and-error or outdated methods, yielding unreliable outcomes. This research aims to fill this gap by creating a comprehensive methodology for designing rib support systems suitable for U.S. underground mines. It encompasses in situ pull-out tests of coal …

Mapping Biomedical Ontology Terms To Ids: Effect Of Domain Prevalence On Prediction Accuracy, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

This study evaluates the ability of large language models (LLMs) to map biomedical ontology terms to their corresponding ontology IDs across the Human Phenotype Ontology (HPO), Gene Ontology (GO), and UniProtKB terminologies. Using counts of ontology IDs in the PubMed Central (PMC) dataset as a surrogate for their prevalence in the biomedical literature, we examined the relationship between ontology ID prevalence and mapping accuracy. Results indicate that ontology ID prevalence strongly predicts accurate mapping of HPO terms to HPO IDs, GO terms to GO IDs, and protein names to UniProtKB accession numbers. Higher prevalence of ontology IDs in the biomedical …

Online Learning-Driven Human Intent Estimation And Control For Human-Robot Interaction, Irfan Ganie, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a novel Stackelberg-game theoretic multilayer-online learning framework for cooperative control of nonlinear Physical Human-Robot Interaction (pHRI), where the human is modeled as the leader guiding a robot follower. This hierarchical interaction is captured as a dynamic Stackelberg game, with the human's intention estimated in real-time through online multilayer neural networks (MNNs). We introduce SVD-based weight update laws for actor-critic MNNs, which approximate value functions and control inputs for both human and robot, eliminating the need for predefined basis functions. In this framework, the human objective is first inferred and used to guide the robot actions by shaping …

Multi-Model Safe Neuro-Optimal Output Tracking Control Of Autonomous Surface Vessels With Explainable Ai, Behzad Farzanegan, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a safety-aware deep reinforcement learning (DRL)-based trajectory tracking control of autonomous surface vessels (ASVs). A multilayer neural network (MNN) observer estimates the ASV's state and uncertain dynamics. By utilizing the estimate state vector from the observer, a safety-aware DRL-based optimal policy is formulated using control barrier function (CBF) and Karush-Kuhn-Tucker (KKT) conditions. An actor-critic MNN with singular value decomposition (SVD)-based update mitigates vanishing gradients. To enhance adaptability, an online safe lifelong learning (SLL) scheme counters catastrophic forgetting across varying ASV dynamics. The Shapley Additive Explanations (SHAP) method identifies key features influencing the control policy. Simulations on an …

Online Adaptive Optimal Tracking Control Of Uncertain Strict Feedback Discrete-Time Systems With Hardware Verification Using A Quadrotor Uav, Maxwell Geiger, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article considers the infinite time horizon optimal tracking control problem for discrete time (DT) partially uncertain strict feedback systems with application to quadrotor UAVs. First, the strict feedback DT system is transformed into an equivalent affine nonlinear DT system in terms of tracking error dynamics. The optimal tracking control problem is solved using an augmented system approach, where a horizon of future reference trajectory points are used in the augmented state, as compared to using a single point. The internal dynamics of the original nonlinear strict feedback system and the transformed affine system in terms of error dynamics are …

Enhancing Measurement Accuracy In Industrial Applications: The Impact Of Sensor Data Imputation On Model Parameter Estimation, Steven Thompson, Michkath Omanda Bouraima, Maciej Jan Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

Digital twins are meant to revolutionize the manufacturing industry by enabling advanced condition monitoring and predictive maintenance processes. However, disruptions within the manufacturing process, such as sensor malfunctions or connectivity issues are inevitable and will cripple these advanced analysis methods if not properly addressed. Therefore, efficient data management and analysis practices are key to advancing this technology. This work examines the impact of missing data imputation on model parameter estimation, a crucial task in developing models for digital twins. We theoretically derive the Cramer-Rao Lower Bound (CRLB) for a DC signal with an unknown scalar parameter in the presence of …

Active Microwave-Thermographic Signal Reconstruction, Logan M. Wilcox, Emma T. Bohannon, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Active microwave thermography (AMT) is a coupled electromagnetic (EM) and thermographic nondestructive testing and evaluation (NDT&E) technique. AMT utilizes a radiating EM source (e.g., an antenna) that induces dielectric/magnetic heating on a specimen under test (SUT) which is subsequently spatiotemporally imaged with an infrared (IR) camera. As all antennas have spatial variation in their radiated power density, a nonuniform thermal excitation results within (or on the surface of) the SUT. This nonuniform heating causes uncertainty in defect detection and has the potential to lead to false positives and/or negatives. To this end, thermographic signal reconstruction (TSR), a well-established thermographic signal …

Enhancing Fiber Optic Interferometric Sensing With Microwave Photonics-Based Dispersion Fourier Transform And Integrated Magnitude–Phase Analysis, Chen Zhu, Ruimin Jie, Chenxi Huang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Fiber optic inline interferometers are widely used for high-precision sensing due to their sensitivity, compactness, and immunity to electromagnetic interference. Traditional optical spectral analysis methods suffer from limited dynamic range due to free spectral range (FSR) constraints, while microwave photonic filtering (MPF) techniques based on dispersion Fourier transform (DFT) provide an alternative by mapping optical signals into the radio frequency (RF) domain. However, conventional passband frequency tracking in MPF systems has limited sensitivity, and the recently demonstrated phase-based methods, though highly sensitive, are constrained by phase wrapping beyond 2π. In this work, we propose and experimentally demonstrate an integrated magnitude–phase …

A Cost-Effective Nilm Solution With Three-Point Labelling And Non-Causal Convolution Technique, Yanan Zhang, Gan Zhou, Yanjun Feng, Zhan Liu, Li Huang, Zhi Li, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Although deep learning is increasingly promising in the field of Non-Intrusive Load Monitoring (NILM) these days, the high costs of data recording and labelling represent a significant challenge for the training of supervised models. To address this, a cost-effective sequence-to-points NILM solution is proposed, integrating three-point labelling with non-causal convolution techniques. The approach introduces a semi-automatic labelling framework for obtaining NILM three-point data, which provides a low-cost data collection and labelling solution for large-scale applications. Then, a novel loss function combining coordinate loss and confidence loss is developed to address the positional misalignment and negative sample confusion in sequence-to-points scenario …

Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling Of Submerged Entry Nozzles, Farhan Mumtaz, Hanok W. Tekle, Bohong Zhang, Xiaodong Li, Sunday Abraham, Bryant Mathis, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This article focuses on the application of sapphire fiber Bragg gratings (FBGs) for instrumentation in submerged entry nozzles (SENs) within the steelmaking industry. The SEN is pivotal for transferring molten steel from a tundish to a mold, while preventing the infiltration of oxygen and nitrogen from the surrounding environment. Maintaining optimal flow conditions in the mold is crucial for ensuring casting process stability and maintaining high-quality steel. Sapphire FBG sensors have been instrumented in SENs to enable distributed thermal mapping for monitoring the health of the SEN. The optical sensor comprises three cascaded sapphire FBGs inscribed using femtosecond (FS) laser …

Filter Based Motor Control For Robotic Applications, Shuzan Kumar Sarkar, Noah Wilding, Shruti Pandey, Nicholas Hawkins, Michael L. Mcintyre

Electrical and Computer Engineering Faculty Research & Creative Works

Controlling coreless DC motor in the field of humanoid robotic application involves considering various surrounding electromagnetic environment interference and sudden change of load with parameters variation of motor dynamics which makes the system complex. This paper presents a filter-based control scheme for a coreless DC motor drive system using an H-bridge inverter as the input circuit of the motor which is easy to implement and cost effective. From the electromagnetic characteristics, the dynamic model of the motor along with the control scheme is implemented in the commercial software PLECS. Then the effectiveness of this approach is validated through simulations demonstrating …