Digital Commons Network^™

Reference Dependence In Queue Design And Pricing Strategies, Jian Liu, Yongpin Zhou, Jian Chen, Peng Li

Electrical and Computer Engineering Faculty Research & Creative Works

This research investigates the effect of reference dependence on waiting times in service systems which formerly used a first-in-first-out (FIFO) service but have introduced a priority line with a fee. Our model combines reference-dependent gain-loss utility with standard customer utility, and we posit that customers are pleased with shorter-than-expected waiting times, whereas longer-than-expected times lead to dissatisfaction and an increased likelihood of balking. The study explores two scenarios: a captive customer system (CCS) and a noncaptive customer system (NCCS), with a focus on optimal pricing and segmentation strategies for revenue and social welfare maximization. The results reveal that, in a …

Energetics Of Mode-1 Internal Waves Interacting With Topographic Ridges Of Varying Height And Slope, Matthew R. Klema, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Energetics of mode-1 internal waves interacting with topographic ridges are investigated using high-resolution two-dimensional simulations at spatial scales of m that span between classical laboratory-scale (m) and field-scale simulations (m). This paper focuses on the energetics of wave-Topography interaction, with emphasis on systematically examining the partitioning of the incident wave energy as a function of wave forcing and topographic parameters. Partitioning of energy into the transmitted, reflected and dissipated components is quantified as a function of wave Froude number (velocity amplitude of forcing and internal wave celerity), slope criticality, where topographic slope and wave characteristic slope, and the ratio of …

Multiphase Electrochemical Li-Ion Intercalation In Iron Selenite: Evidence Of Fe³⁺/⁴⁺ Redox And Single-Crystal-To-Single-Crystal Topochemical Transformation During Chemical Lithiation, Sutapa Bhattacharya, Aleksandr V. Chernatynskiy, Amitava Choudhury

Physics Faculty Research & Creative Works

An iron selenite-based cathode compound, LiFe(SeO₃)₂, is synthesized via a simple hydrothermal route. The bulk purity of the compound is confirmed by powder X-ray diffraction (PXRD), Mössbauer spectroscopy, and Fourier transform infrared spectroscopy (FTIR). The crystal structure determined from the single-crystal X-ray diffraction and Rietveld refinement of synchrotron PXRD data perfectly matches the previously reported structure in the I4̅2d space group. The crystal structure is built up of edge-sharing of FeO₆ octahedra and LiO₄ tetrahedra interconnected by SeO₃ trigonal pyramidal units, forming a three-dimensional open framework network with channels through all three axes. …

Analysis Of Dual, Onboard Storage And Separation Of Biogas In Carbon-Based Adsorbed Gas Systems, Kyle Newport, Carlos Wexler, Peter Pfeifer, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Direct utilization of "low-grade" biogas, as an important sustainable energy resource, provides a viable approach to avoid the energy-intensive upgrading step that is often required to separate CO₂ from CH₄ in order to produce a pipeline-grade fuel gas. This study investigated dual, onboard storage and separation of biogas in an adsorbed gas system (AGS) over two highly porous carbon sorbents, Br-318 and Nuchar, in the pressure range of 0-55 bar. The AGS was pressurized with a 50/50 vol % CH₄/CO₂ feed and working capacities as a function of charge-discharge pressures and temperatures were determined and …

Enhancing Frp-Concrete Interface Bearing Capacity Prediction With Explainable Machine Learning: A Feature Engineering Approach And Shap Analysis, Yanping Zhu, Woubishet Zewdu Taffese, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study introduces a novel approach to predict the shear bearing capacity of FRP-concrete interfaces using explainable machine learning. Eight algorithms are employed: three standalone models (Artificial Neural Network, Support Vector Regression, and Decision Tree) and five ensemble learning models (Bagging, Random Forest, Adaptive Boosting, Gradient Boosting, and Extreme Gradient Boosting). Four scenarios with varying input features, including engineered features inspired by mechanics-based bearing capacity equations, are examined. Notably, the inclusion of engineered features such as the stiffness of the FRP strip (Kf) significantly enhanced prediction accuracy and efficiency, although the width correction coefficient (bf/bc) did not yield significant benefits, …

Multi-Dimensional Visualization Strategies Using Web Scraping Tools: A Word Formation Synthesis Case Study For Russian Verbs Of Sound, John Simmons

Graduate Student Research & Creative Works

No abstract provided.

Three-Dimensional Technique For Accurate Pavement Macrotexture Measurement Using Surface Volume Parameters, Alireza Pourhassan, Ahmed A. Gheni, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study introduces a novel three-dimensional (3D) pavement macrotexture measurement technique using ISO 25178 Surface Volume Parameters (SVP). The method calculates pavement material volume and texture height using cutoff thresholds based on the cumulative probability density function of measured heights. The research aims to optimize these cutoff thresholds for accurate 3D analysis of pavement macrotexture. The study evaluates the performance of various 3D and 2D parameters—assessing their repeatability, reliability, and accuracy—across thirty pavement samples with diverse macrotexture conditions. Findings show that the 3D SVP method, with optimized cutoff thresholds, strongly correlates with sand patch mean texture depth (MTD) and exhibits …

Boosting The Power Performance Of Microbial Fuel Cells By Using Dual Nanomaterial-Modified Carbon Felt Electrodes, Krishna Thapa, Wenyan Liu, Yuwei Zhang, David J. Westenberg, Yishu Zhou, Risheng Wang

Chemistry Faculty Research & Creative Works

Innovative design enhancements to microbial fuel cells (MFCs) are pivotal for improving their viability as renewable energy sources. This study introduces a dual approach to electrode modification, integrating polyaniline (PANI) and gold nanoparticles (AuNPs) on carbon felt (CF) anodes coupled with a unique cathode composed of DNA origami and chitosan. The synergistic effect of PANI and AuNPs significantly increases the hydrophilicity and conductivity of the anode, leading to a considerable surge in power density. Concurrently, the biocompatible DNA origami and chitosan-functionalized cathode facilitates efficient electron transfer without relying on conventional catalysts. Together, these modifications yield a 52.42% increase in the …

Tradeoffs In Longleaf Pine Conservation: Prescribed Fire Management Increases Exotic Ambrosia Beetle Abundance In Pine-Hardwood Forests, Davide Nardi, Hannah Bares, Natalie A. Clay, Robin M. Verble, Davide Rassati, Lorenzo Marini, John Thomason, John J. Riggins

Biological Sciences Faculty Research & Creative Works

Exotic woodboring insects, including some ambrosia beetles (Coleoptera: Curculionidae, Scolytinae, and Platypodidae), are threatening native forests worldwide. Longleaf pine (Pinus palustris Mill.) forest is an endangered habitat in the southeastern United States. One of the most important actions necessary for its conservation is prescribed fire, which maintains its savanna structure. However, prescribed fire is a forest disturbance, possibly creating new niches for colonization by exotic insects. The interaction between prescribed fire and exotic ambrosia species is understudied, especially in highly fire-dependent ecosystems. We carried out a two-year experiment in mixed longleaf pine forests in Alabama, USA. We compared ambrosia beetle …

A Complete Invariant For Shift Equivalence For Boolean Matrices And Finite Relations, Ethan Akin, Marian Mrozek, Mateusz Przybylski, Jim Wiseman

Mathematics and Statistics Faculty Research & Creative Works

We give a complete invariant for shift equivalence for Boolean matrices (equivalently finite relations), in terms of the period, the induced partial order on recurrent components, and the cohomology class of the relation on those components.

Effects Of Silver Nanoparticles In Pectin Polysaccharide Thin Film On Resistive Switching Characteristics, Jia Zheng Yeoh, Muhammad Awais, Feng Zhao, Kuan Yew Cheong

Electrical and Computer Engineering Faculty Research & Creative Works

This study investigates the resistive switching characteristics of Ag nanoparticle (AgNP)-incorporated pectin (pectin-AgNP) as a memristive thin film, with varying concentrations of AgNP (0.0 wt.%, 0.5 wt.%, and 1.0 wt.%) and pectin (5.0 mg/L, 5.5 mg/L, 6.0 mg/L, 6.5 mg/L, and 7.0 mg/L), sandwiched between Au and indium tin oxide (ITO) electrodes on glass substrate. The structural, chemical, and electrical properties of these pectin-AgNP thin films were evaluated. With AgNP concentration of 0.5 wt.% in a pectin concentration of 5.5 mg/mL, the Fourier transform infrared (FTIR) spectra indicated the highest presence of C–O bonds. This suggests the incorporation of AgNP …

Machine Vision To Provide Quantitative Analysis Of Meltpool Stability For A Coaxial Wire Directed Energy Deposition Process, Braden Mclain, Remy Mathenia, Todd Sparks, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Wire-based additive manufacturing (AM) is at the forefront of complex metal fabrication because of its scalability for large components, potential for high deposition rates, and ease of use. A common goal of wire directed energy deposition (DED) is preserving a stable process throughout deposition. If too little energy is put into the deposition, the wire will stub into the substrate and begin oscillating, creating turbulence within the melt pool. If too much energy exists, the wire will overheat, causing surface tension to take over and create liquid drips as opposed to a solid bead. This paper proposes a computer vision …

Multi-Step Ahead Water Level Forecasting Using Deep Neural Networks, Fahimeh Sharafkhani, Steven Corns, Robert Holmes

Engineering Management and Systems Engineering Faculty Research & Creative Works

Stream gauge height (water level) is a significant indicator for forecasting future floods. Flooding occurs when the water level exceeds the flood stage. Predicting imminent floods can save lives, protect infrastructure, and improve road traffic management and transportation. Deep neural networks have been increasingly used in this domain due to their predictive capabilities in capturing complex features and interdependencies. This study employs four distinct models—Multi-Layer Perceptron (MLP), Long Short-Term Memory (LSTM), transformer, and LSTNet—with MLP serving as the baseline model to forecast water levels. The models are trained using data from 20 distinct river gages across the state of Missouri …

Underrepresented Minority Faculty In The Usa Face A Double Standard In Promotion And Tenure Decisions, Theodore Masters-Waage, Christiane Spitzmueller, Ebenezer Edema-Sillo, Ally St. Aubin, Michelle Penn-Marshall, Erika Henderson, Peggy Lindner, Cynthia Werner, Tracey Rizzuto, Juan Madera

Engineering Management and Systems Engineering Faculty Research & Creative Works

Underrepresented minority (URM) faculty face challenges in many domains of academia, from university admissions to grant applications. We examine whether this translates to promotion and tenure (P&T) decisions. Data from five US universities on 1,571 faculty members' P&T decisions show that URM faculty received 7% more negative votes and were 44% less likely to receive unanimous votes from P&T committees. A double standard in how scholarly productivity is rewarded is also observed, with below-average h-indexes being judged more harshly for URM faculty than for non-URM faculty. This relationship is amplified for faculty with intersectional backgrounds, especially URM women. The differential …

Reflections On Linear B, (Part 5): Linear B Sign 50 From Egyptian Hieroglyph For "Hair"?, Gerald Leonard Cohen

Arts, Languages and Philosophy Faculty Research & Creative Works

Linear B sign 50, pronounced /pu/, is almost identical to one of the Egyptian hieroglyphs for ‘hair,’ and the sign’s pronunciation /pu/ might have been taken from a Greek word connected with hair, viz., ampuks ‘headband.’ The headband was part of ancient Egyptian royal head-dress, and most importantly, it was worn by the goddess Maat to fasten an ostrich feather (symbol of truth, order, justice) to her head. A pattern taking shape for me is that several Linear B signs of Egyptian origin are connected with the Egyptian gods, and Linear B sign 50 may fit into this pattern.

Glove Compartment: Antedatings And The Ultimate (Albeit Indirect) Role Of Racing Driver Dorothy Levitt (1882-1922) In The Origin Of The Term, Gerald Leonard Cohen

Arts, Languages and Philosophy Faculty Research & Creative Works

At first glance it might seem the only thing to say about ‘glove compartment’ is that its original purpose was to hold gloves. And indeed, OED3 presents no discussion on the term, merely setting forth two attestations (1939, 1959). But questions do arise, e.g.,

1) Why was it so important to have gloves in the car?

2) If gloves served the practical purpose of preventing hands from numbing in cold weather, why is the first OED attestation so late?

3) Can any earlier attestations be found?

4) Can anyone be determined to have played a role in the naming of …

Process Development And Techno-Economic Analysis For Combined And Separated Co2 Capture-Electrochemical Utilization, Abdullah Al Moinee, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Combining CO₂ capture and utilization into a single unit operation offers a feasible solution for converting a sustainable feedstock into marketable commodity chemicals, while reducing energy requirements from separated processes. In this research, we developed a process model and performed a techno-economic analysis (TEA) for point-source CO₂ capture and electrochemical-based utilization in light olefins production under both separated and integrated scenarios. CO₂ containing flue gas from a 500 MW power plant was utilized as a feed while CO₂ utilization involved electrochemical reduction reactions to produce light olefins directly from CO₂. A meticulous analysis was …

Synthesis And Properties Of (Hf,Mo,Ti,W,Zr)B2–(Hf,Mo,Ti,W,Zr)C Dual Phase Ceramics, S. Filipović, S. M. Smith, G. Hilmas, W. Fahrenholtz, N. Obradović, S. Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Dense, dual phase (Hf,Mo,Ti,W,Zr)B₂–(Hf,Mo,Ti,W,Zr)C ceramics were synthesized with varying contents of Mo and W. The final (Hf_0.317Mo_0.025Ti_0.317W_0.025Zr_0.317)C–(Hf_0.317Mo_0.025Ti_0.317W_0.025Zr_0.317)B₂ was a nominally pure, dual phase ceramic, while compositions with higher amounts of Mo and W contained multiple phases. The final microstructures had submicron grains due to pinning effects. Vickers hardness values were up to 48.6 ± 2.2 GPa for an applied load of 0.49 N for the ceramic with optimized composition and densification. The solubility limits for Mo and …

Using Convolutional Neural Network To Determine Time Window For Analyzing Local Shear-Wave Splitting Measurements, Yanwei Zhang, Stephen S. Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The time window for analyzing local shear-wave splitting (SWS) phases significantly affects the quality of measurements, revealing a noteworthy domain influence. In this study, an approach using convolutional neural network (CNN) is applied to determine the end of time window (e), which has a similar idea of the phase-picking CNNs. The start of time window is 0.5 s before e. Our data set contains 803 human-labeled measurements, recorded from three stations located in Ridgecrest, California. These measurements are foreshocks and aftershocks of an M 7.1 earthquake on 6 July 2019. After 21 times shifting on each measurement, 90% of the …

Atmosphere Effects In Laser Powder Bed Fusion: A Review, Ben Brown, Cody Lough, Davis Wilson, Joseph Newkirk, Frank Liou

Materials Science and Engineering Faculty Research & Creative Works

The use of components fabricated by laser powder bed fusion (LPBF) requires the development of processing parameters that can produce high-quality material. Manipulating the most commonly identified critical build parameters (e.g., laser power, laser scan speed, and layer thickness) on LPBF equipment can generate acceptable parts for established materials and moderately intricate part geometries. The need to fabricate increasingly complex parts from unique materials drives the limited research into LPBF process control using underutilized parameters, such as atmosphere composition and pressure. As presented in this review, manipulating atmosphere composition and pressure in laser beam welding has been shown to expand …

Breaking And Trapping Cooper Pairs By Rydberg-Molecule Spectroscopy In Atomic Fermi Superfluids, Chih Chun Chien, S. I. Mistakidis, H. R. Sadeghpour

Physics Faculty Research & Creative Works

We propose a spectroscopic probe of the breaking and localization of Cooper pairs in an atomic Fermi superfluid interacting with a Rydberg impurity. This is achieved by monitoring the formation of diatomic and triatomic ultralong-range molecular species in the superfluid across the Bardeen-Cooper-Schrieffer (BCS)-Bose-Einstein condensation (BEC) crossover. The triatomic Rydberg molecule in the BEC regime heralds the trapping of a tightly bound Cooper pair, reminiscent of pion capture in nuclear matter, while the breaking of a Cooper pair on the BCS side by a diatomic Rydberg molecule is evocative of binary-star tidal disruption by a black hole. Spectroscopy of the …

Spectral Study Of Very-High-Energy Gamma Rays From Ss 433 With Hawc, R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, R. Babu, E. Belmont-Moreno, A. Bernal, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, J. Cotzomi, E. De La Fuente, D. Depaoli, N. Di Lalla, R. Diaz Hernandez, B. L. Dingus, M. A. Duvernois, K. Engel, T. Ergin, C. Espinoza, K. L. Fan, K. Fang, N. Fraija, S. Fraija, J. A. Garcia-Gonzalez, A. Gonzalez Munoz, M. M. Gonzalez, J. A. Goodman, S. Groetsch, J. P. Harding, S. Hernandez-Cadena, I. Herzog, D. Huang, F. Hueyotl-Zahuantitla, P. Huntemeyer, A. Iriarte, S. Kaufmann, A. Lara, W. H. Lee, J. Lee, C. De Leon, H. Leon Vargas, A. L. Longinotti, G. Luis-Raya, K. Malone, J. Martinez-Castro, J. A. Matthews, P. Miranda-Romagnoli, J. A. Montes, E. Moreno, M. Mostafa, L. Nellen, M. U. Nisa, R. Noriega-Papaqui, Y. Perez Araujo, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalez, E. Ruiz-Velasco, H. Salazar, A. Sandoval, M. Schneider, J. Serna-Franco, A. J. Smith, Y. Son, R. W. Springer, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, E. Varela, L. Villasenor, Xiaojie Wang, Z. Wang, I. J. Watson, S. Yu, S. Yun-Carcamo, H. Zhou

Physics Faculty Research & Creative Works

Very-high-energy (0.1-100 TeV) gamma-ray emissions were observed in High-Altitude Water Cherenkov (HAWC) data from the lobes of the micro quasar SS 433, making them the first set of astrophysical jets that were resolved at TeV energies. In this work, we update the analysis of SS 433 using 2565 days of data from the HAWC observatory. Our analysis reports the detection of a point-like source in the east lobe at a significance of 6.6σ and in the west lobe at a significance of 8.2σ. For each jet lobe, we localize the gamma-ray emission and identify a best-fit position. The locations are …

Analysis Of The Emission And Morphology Of The Pulsar Wind Nebula Candidate Hawc J2031+415, R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A.Ayala Solares, R. Babu, E. Belmont-Moreno, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, U. Cotti, J. Cotzomi, S. Coutiño De León, E. De La Fuente, C. De León, D. Depaoli, N. Di Lalla, R. Diaz Hernandez, B. L. Dingus, M. A. Duvernois, J. C. Diaz-Velez, K. Engel, T. Ergin, C. Espinoza, K. L. Fan, N. Fraija, J. A. Garcia-Gonzalez, M. M. Gonzalez, J. A. Goodman, S. Groetsch, J. P. Harding, S. Hernandez-Cadena, I. Herzog, D. Huang, F. Hueyotl-Zahuantitla, P. Huntemeyer, A. Iriarte, S. Kaufman, J. Lee, H. Leon Vargas, A. L. Longinotti, G. Luis-Raya, K. Malone, J. Martinez-Castro, J. A. Matthews, P. Miranda-Romagnoli, J. A. Montes, E. Moreno, M. Mostafa, M. Najafi, L. Nellen, M. Newbold, M. U. Nisa, R. Noriega-Papaqui, Y. Perez Araujo, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalez, E. Ruiz-Velasco, H. Salazar, A. Sandoval, D. Salazar-Gallegos, M. Schneider, J. Serna-Franco, A. J. Smith, Y. Son, R. W. Springer, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, E. Varela, L. Villasenor, Xiaojie Wang, Zhen Wang, I. J. Watson, S. Yu, S. Yun-Carcamo, H. Zhou

Physics Faculty Research & Creative Works

The first TeV γ-ray source with no lower energy counterparts, TeV J2032+4130, was discovered by HEGRA. It appears in the third HAWC catalog as 3HWC J2031+415 and it is a bright TeV γ-ray source whose emission has previously been resolved as two sources: HAWC J2031+415 and HAWC J2030+409. While HAWC J2030+409 has since been associated with the Fermi Large Area Telescope Cygnus Cocoon, no such association for HAWC J2031+415 has yet been found. In this work, we investigate the spectrum and energy-dependent morphology of HAWC J2031+415. We associate HAWC J2031+415 with a γ-ray binary system containing the pulsar PSR J2032+4127 …

Testing The Molecular Cloud Paradigm For Ultra-High-Energy Gamma Ray Emission From The Direction Of Snr G106.3+2.7, R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, R. Babu, E. Belmont-Moreno, A. Bernal, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, U. Cotti, J. Cotzomi, S. Coutiño De León, E. De La Fuente, C. De León, D. Depaoli, P. Desiati, N. Di Lalla, R. Diaz Hernandez, B. L. Dingus, M. A. Duvernois, K. Engel, T. Ergin, C. Espinoza, K. L. Fan, K. Fang, N. Fraija, S. Fraija, J. A. Garcia-Gonzalez, F. Garfias, M. M. Gonzalez, J. A. Goodman, S. Groetsch, J. P. Harding, S. Hernandez-Cadena, I. Herzog, J. Hinton, D. Huang, F. Hueyotl-Zahuantitla, T. B. Humensky, P. Huntemeyer, S. Kaufman, D. Kieda, W. H. Lee, J. Lee, H. Leon Vargas, J. T. Linnemann, A. L. Longinotti, G. Luis-Raya, K. Malone, O. Martinez, J. Martinez-Castro, J. A. Matthews, P. Miranda-Romagnoli, J. A. Montes, E. Moreno, M. Mostafa, M. Najafi, L. Nellen, M. U. Nisa, L. Olivera-Nieto, N. Omodei, Y. Perez Araujo, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalezz, H. Salazar, D. Salazar-Gallegos, A. Sandoval, M. Schneider, J. Serna-Franco, A. J. Smith, Y. Son, R. W. Springer, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, E. Varela, L. Villasenor, Xiaojie Wang, Z. Wang, I. J. Watson, E. Willox, S. Yu, S. Yun-Carcamo, H. Zhou

Physics Faculty Research & Creative Works

Context. Supernova remnants (SNRs) are believed to be capable of accelerating cosmic rays (CRs) to PeV energies. SNR G106.3+2.7 is a prime PeVatron candidate. It is formed by a head region, where the pulsar J2229+6114 and its boomerang-shaped pulsar wind nebula are located, and a tail region containing SN ejecta. The lack of observed gamma ray emission from the two regions of this SNR has made it difficult to assess which region would be responsible for the PeV CRs. Aims. We aim to characterize the very-high-energy (VHE, 0.1-100 TeV) gamma ray emission from SNR G106.3+2.7 by determining the morphology and …

Search For Joint Multimessenger Signals From Potential Galactic Cosmic-Ray Accelerators With Hawc And Icecube, R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, R. Babu, E. Belmont-Moreno, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, U. Cotti, J. Cotzomi, S. Coutiño De León, E. De La Fuente, D. Depaoli, N. Di Lalla, R. Diaz Hernandez, J. C. Diaz-Velez, K. Engel, T. Ergin, K. L. Fan, K. Fang, N. Fraija, S. Fraija, J. A. Garcia-Gonzalez, F. Garfias, M. M. Gonzalez, J. A. Goodman, S. Groetsch, J. P. Harding, S. Hernandez-Cadena, I. Herzog, D. Huang, F. Hueyotl-Zahuantitla, P. Huntemeyer, I. Iriarte, S. Kaufman, J. Lee, H. Leon Vargas, G. Luis-Raya, K. Malone, J. Martinez-Castro, J. A. Matthews, P. Miranda-Romagnoli, J. A.. Montes, E. Moreno, M. Mostafa, L. Nellen, M. U. Nisa, N. Omodei, M. Osorio, Y. Perez Araujo, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalez, H. Salazar, D. Salazar-Gallegos, A. Sandoval, M. Schneider, J. Serna-Franco, A. J. Smith, Y. Son, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, Xiaojie Wang, I. J. Watson, K. Whitaker, E. Willox, H. Wu, S. Yu, S. Yun-Carcamo, H. Zhou

Physics Faculty Research & Creative Works

The origin of high-energy galactic cosmic rays is yet to be understood, but some galactic cosmic-ray accelerators can accelerate cosmic rays up to PeV energies. The high-energy cosmic rays are expected to interact with the surrounding material or radiation, resulting in the production of gamma-rays and neutrinos. To optimize for the detection of such associated production of gamma-rays and neutrinos for a given source morphology and spectrum, a multimessenger analysis that combines gamma-rays and neutrinos is required. In this study, we use the MultiMission Maximum Likelihood framework with IceCube Maximum Likelihood Analysis software and HAWC Accelerated Likelihood to search for …

Human-Centered Approach For Resilience Assessment Of Healthcare Networks Subjected To Sequential Earthquakes, Emad Hassan, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Healthcare services are critical for community resilience and stability as their role after disastrous events is indispensable to reducing casualties and returning the community to normalcy. Sequential mainshock-aftershock events can damage hospital components, reduce utility availability, and cause multiple patient surges. No studies have been conducted to evaluate the impact of mainshock-aftershock events on healthcare resilience. Accordingly, here we investigate the impact of multiple earthquakes on the healthcare network in Shelby County, Tennessee, and determine the optimal resources needed to enhance its functionality. The functionality is estimated by combining functionality quantity and quality terms. The quantity is calculated based on …

Circular Economy Integration In Leed: A Decade Of Materials And Resources Credit Achievement Patterns, Radwa Eissa, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Previous studies consistently label the Materials and Resources (MR) credit category of the Leadership in Energy and Environmental Design (LEED) as the least attainable, despite its critical role in transitioning to a circular economy (CE). To this end, a long-standing gap exists in understanding the MR credit achievement, especially in LEED v4, which has been in use for nearly over a decade. This paper evaluates the level of CE integration in LEED v4 across 971 US-based certified projects. The study comprehensively analyzed the projects achievement patterns of the five MR credits: Building Life Cycle Impact Reduction (C1), Environmental Product Declarations …

Anti-Corrosion Performance Of Magnesium Potassium Phosphate Cement Coating On Steel Reinforcement: The Effect Of Boric Acid, Fan Zhang, Jihui Qin, Kangyi Cai, John J. Myers, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

It has recently been found that magnesium potassium phosphate cement (MKPC) paste coating applied on the surface of steel reinforcement can effectively retard the onset of corrosion and suppress corrosion reactions. However, the fast-setting nature of MKPC—which is a merit in repair—can be problematic in a practical engineering process of coating the steel reinforcement with MKPC paste. To address this problem, boric acid (H₃BO₃) was added as a retarder in an MKPC formulation to prolong the setting time. This work investigated the impact of boric acid (at 5% by weight of MgO) on the anti-corrosion performance …

Temperature Effect On The Properties And Response Of Composite Materials And Plates, Victor Birman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The paper illustrates the effect of temperature on composite material properties and its influence on the response of composite plates. Two composites considered include laminae with uniaxially oriented and with in-plane randomly oriented fibers. Analytical solutions are presented for a uniformly heated large-aspect-ratio plate deforming into a cylindrical surface. The solutions are demonstrated for thermal buckling and natural frequencies for the cases of controlled loading and controlled displacements. Micromechanical residual and lifetime thermally induced stresses at the interface of fibers and matrix are assessed to predict a possible onset of local damage after the curing and during lifetime. The material …

The Effects Of Wildfires On The Mental And Physical Health Of School-Age Children In North America: A Scoping Review, Sarah Oerther, Sarah Manspeaker, Alison Wix, Daniel Oerther, Carmen Marsit

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Background: Wildfires are occurring more often and with greater intensity, leading to longer and harsher fire seasons. As a result, children are more frequently exposed to wildfire smoke, which increases their risk of mental and physical health effects. Purpose: The purpose of our scoping review is to explore the current literature on what is known about the direct and indirect impacts of wildfires on the mental and physical health of school-age children in North America (5 to 18-year-olds). Methods: A health sciences librarian-assisted literature search, with input from the research team, was performed. Results: A total of 16 studies were …