Digital Commons Network^™

Characterization And Modeling Of Properties Of Unsaturated And Partially Damaged Cement-Based Materials, Rezwana Binte Hafiz

Doctoral Dissertations

"Transport properties, governing the resistance of cement-based materials to harmful substances are essential considerations for long-term performance. This study addressed the often-overlooked dimension of transport properties in unsaturated cement-based materials, crucial as most concrete structures face variable environmental conditions, leading to partial saturation. A two-scale model was introduced, enhancing our comprehension of transport properties in conditions reflecting real-world scenarios. Empirical correlation representing bulk paste characteristics was established, facilitating the upscaling of properties to mortar and concrete. The model was extended to predict the transport properties of mortar as well.

Environmental factors can contribute to the degradation of cement-based materials, with …

Additive Manufacturing Of Multifunctional Materials And Composites, John Michael Pappas

Doctoral Dissertations

"This research focused on developing fundamental knowledge of process-material interactions for additive manufacturing of multifunctional materials that are highly desirable in high-tech industries for potential weight and space savings. Multifunctional materials are very sensitive to defects, which severely hinder performance. Thus, defect formation was systematically studied to develop strategies and methodologies to efficiently fabricate high-performance materials and composites. Blown-powder-based laser additive manufacturing of transparent spinel ceramics was investigated to reduce porosity and cracking, defects that hindered transparency and mechanical properties. A systematic study of processing parameters revealed that laser power and powder flow rate had the largest effects on defect …

Exploring The Feasibility Of Innovative Integration Of Phase Change Materials For Thermo-Adaptive Asphalt Pavements, Farshad Saberi Kerahroudi

Doctoral Dissertations

"Current research examined the feasibility and efficiency of employing phase change materials (PCMs) in asphalt pavement materials to result in thermo-adaptive asphalt pavement. The PCM was introduced to the asphalt materials in three different scales, including asphalt binder, asphalt mastic, and asphalt mixture. After investigating asphalt at different scales, mix blending method was found as the easiest method without any complexity to mix asphalt binder with PCM. The testing results could reveal an improvement in the high temperature performance of asphalt binder without sacrificing the low temperature performance with the presence of PCM and Gilsonite. Also, introducing PCM to asphalt …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Effect Of Thermomechanical Processing And Heat Treatment On The Microstructure And Mechanical Properties Of Ultra-High Strength Steels, Rogerio Antao Cardoso

Doctoral Dissertations

"A martensite-based and an austenite-based Fe-Mn-Al steels were investigated aiming the pilot-scale production of steels that meet military specifications for Rolled Homogeneous Armor (RHA) and High-hardness Armor (HHA) plates. Each material underwent specific thermomechanical processes and the following hardness, Charpy V-notch (CVN) impact toughness at -40 °C and room-temperature tensile properties were correlated with the resulting microstructures.

Specimens of the martensitic steel were austenitized at 1010 °C, quenched and tempered at 150, 175, 200, 225 and 250 °C for times up to four hours. As for the Fe-Mn-Al steel, its hot rolling schedule was design to promote strain accumulation in …

Processing And Densification Of Multi-Phase High-Entropy Ceramics, Steven Smith

Doctoral Dissertations

"This work focuses on the processing and densification of multiphase, high-entropy ceramics to promote their use in friction stir welding technologies. Several high-entropy systems including high-entropy borides, carbides, and their composites were produced. Boro/carbothermal and carbothermal synthesis were used to produce high-entropy powders from oxide powder mixtures. Composites of high-entropy borides and high-entropy carbides were produced using a sequential approach to produce both phases. The carbide was first produced using carbothermal reduction, then ZrH2 and B4C were added to the carbide powder to produce the high-entropy boride phase. The resulting powder was densified by spark plasma sintering and pressureless sintering, …

Application Of Artificial Intelligence Techniques To Improve Leadership Decision Making With Uncertainty, Michael David Parrish

Doctoral Dissertations

"Every good leader is a good manager, but not every good manager is a good leader. The difference between the leader and the manager is critical decision-making. Today’s decision-making environment is characterized as Volatile, Uncertain, Complex, and Ambiguous (VUCA). With the exponential increase in the technical capabilities of systems, the human has become the weakest link in the use of such systems. To remain relevant, good leaders must continuously adapt to new advances in technology and processes.

The research contributions of this work provide several unique and novel solutions for leaders to utilize artificial intelligence tools to improve and optimize …

Selected Topics In Blockchain-Aided Iot Inference, Yiming Jiang

Doctoral Dissertations

"Blockchain has recently been considered in the Internet of Things (IoT) to secure data exchanges and storage across various engineering applications. This newly emerging blockchain-aided IoT (BIoT) network has been applied to a great deal of security-related applications. However, the BIoT still has the vulnerability that can be exploited by attackers, potentially impairing the performance of BIoT applications. Despite this, research addressing the vulnerability has been limited. This work presents four studies aimed at addressing critical gaps in current BIoT research.

The first study introduces a Time-Restricted Double-Spending Attack (TR-DSA) model for Proof-of-Work (PoW)-based blockchains, where the adversary only conducts …

A Hybrid Data Processing, Computational Intelligence, And Complex Systems Modeling Approach For Describing And Predicting The Bitcoin Market, Oluwadamilare Akinpelu Omole

Doctoral Dissertations

"The Bitcoin market, like traditional financial markets, is a complex system with intricate interdependencies and nonlinear interactions among various market elements. This, coupled with the inherent uncertainty and high volatility present, makes predicting Bitcoin price movements difficult. The lack of understanding of the underlying market dynamics often results in significant losses for investors and traders. Existing studies have focused on the use of predictive models, which have not sufficiently captured the complexities of the market and cannot forecast extreme market events. This research endeavors to bridge this gap by combining data processing techniques, computational intelligence, and complex systems theory to …

Atmospheric Transport Of Radionuclides, Meteorological Data Mining & Synthesis For Site Data Supplementation, Ben Yao Sonpon

Doctoral Dissertations

"This research aligns with the NRC's vision of implementing risk-informed decision-making to support its regulatory charter. The suite of tools developed includes automated procedures for data mining and extracting meteorological (met) data from various national and regional repositories. A second data analytics tool automates the process of data fusion into a uniform format while preserving data fidelity. Autocorrelations were then established, and correlation coefficients were calculated between the Callaway Nuclear Power Plant (Callaway) and nearby off-site weather stations. The complexity of these correlations depends on factors such as physical proximity, geographic features, and topology, potentially necessitating multivariate analysis (MVA). Furthermore, …

Metal-Free Photoredox Catalysis For The S-Trifluoromethylation Of Thiols And Investigation Of Ph-Dependent Decontamination Of Dimethyl Chlorophosphate, A Nerve Agent Simulant, Via Hydrolysis With Azoles, Raheemat Rafiu

Doctoral Dissertations

"Organofluorine chemistry plays a critical role in synthetic chemistry due to the unique properties of fluorine. However, the S-trifluoromethylation of thiols remains underexplored, with existing methods often relying on toxic and expensive organometallic catalysts. Given the advantages of S-trifluoromethylated compounds, including enhanced pharmacological activity and improved metabolic stability, we developed a green and cost-effective method for the synthesis of S-CF3 compounds using diacetyl as the organic catalyst and Langloi's reagent as the trifluoromethylating reagent. This reaction, which proceeds under mild conditions using visible light photoredox catalysis, works across various substrate scopes, including aromatic, heteroaromatic, and aliphatic thiols.

Chemical Warfare Agents …

Shock Wave And Vortex Ring Dynamics From Explosively Driven Shock Tunnels, Rachel Louise Bauer

Doctoral Dissertations

"Blast and shock tubes are frequently used to create shock waves to study their effects and impacts on structures, humans, and personal protective equipment. These tubes are also found in other industries including wind tunnels for aerodynamic testing, jet engines for propulsion research, spacecraft reentry simulations, and industrial applications such as material testing and high-velocity impact studies. Despite their widespread use, there is no standard design, with variations in geometry, size, and energy sources. Current research only evaluates the peak pressure of the shock wave produced and does not consider the effects of changing the size or geometry of the …

Lifelong Machine Learning With Adaptive Resonance Theory, Sasha Petrenko

Doctoral Dissertations

"This publication option dissertation is composed of three papers concerning the study of the problem lifelong machine learning with Adaptive Resonance Theory (ART) algorithms. Lifelong learning (L2) is a challenging machine learning paradigm that both encompasses and formalizes the fields of continual learning and incremental learning. The field is concerned with the mitigation of the phenomenon of catastrophic forgetting whereby learning agents that are faced with incrementally novel information deleteriously overwrite previous knowledge if that learning process is not regularized to counteract this consequence. ART algorithms solve this stability-plasticity dilemma by optimally assigning learning to categories or instantiating new knowledge …

Investigation Of Shockwave Behavior To Inform Helmet Design Using Schlieren Imagery And Free-Field Blasts, Cody Jh Thomas

Doctoral Dissertations

"Ballistic resistance of military helmet designs is a prioritized feature to protect warfighters from traumatic brain injury. However, injuries from shock-based threats have not been optimized for warfighter protection and have resulted in the prevalence of blast-induced traumatic brain injury (bTBI). Research gaps were identified in understanding the under wash effect using free field blasts and schlieren imagery. Thus, the following were investigated: (1) overpressure changes on a warfighter’s head due to directionality from a blast, (2) shock wave dampening effects of viscoelastic materials in helmets, and (3) geometric effects of a helmet brim design in the reduction of bTBI. …

Nmr Relaxometry Approach For The Detection Of Asphalt Binder Performance Properties, Rebecca Herndon

Doctoral Dissertations

"Asphalt is a necessary material for transportation infrastructure. Understanding the material properties of asphalt binders is critical for improving infrastructure and enhancing the lifetime of pavements. While the physical properties of asphalt binders are well-defined by standard procedures and parameters, the chemical environment lacks definition. Physical parameters like viscosity and stiffness are traditionally used to differentiate asphalt binders, describe aging, and indicate the impact of additives. However, these tests have limited insight into the material's chemical environment. Therefore, a nondestructive analytical technique, nuclear magnetic resonance (NMR) relaxometry, was employed to investigate the chemical environment of asphalt binders. Although NMR relaxometry …

Sensor Embedding And Thermal Monitoring Strategies For Laser-Foil-Printing Additive Manufacturing, Tunay Turk

Doctoral Dissertations

"This work investigates Laser Foil Printing (LFP), a novel metal additive manufacturing (AM) process that fabricates parts layer-by-layer using metal foils. To enhance LFP productivity, the process steps were optimized, and an 88.1% reduction in processing duration was achieved. A unique aspect of this study was the introduction of laser polishing as an edge polishing technique within the LFP process. This innovative approach, employing an overlapping spiral pattern, leverages selective laser remelting and erosion to effectively suppress elevated edges. To stabilize the molten melt pool, a discrete spot scanning strategy was implemented. The fabricated parts were subjected to detailed analysis, …

New Topologies For High Voltage Gain Dc-Dc Power Electronic Converters – Theoretical Analysis And Experimental Validation, Saeed Habibi

Doctoral Dissertations

"This dissertation is focused on developing and analyzing new high voltage gain DC-DC power electronic converters. The proposed converters in this dissertation are suitable candidates for connecting low voltage sources such as photovoltaic (PV) panels or fuel cell (FC) stacks to a DC microgrid or DC link of an inverter. The proposed converters provide desired characteristics such as high voltage gain at a low or medium duty cycle values, low voltage stress on power semiconductors, and continuous input current. Initially, the research introduces three novel converter topologies: First, two quadratic converters based on the combination of a three-winding coupled inductor …

Advancing Refuge Alternatives In Mine Emergencies Using Advanced Numerical Simulation, Kutay Emre Karadeniz

Doctoral Dissertations

"Incidents and emergencies within underground coal mines can result in severe injuries or even loss of life, particularly due to the hazardous nature of mine explosions. One of the options for the miners to protect themselves from these hazards is to be sheltered in a refuge alternative (RA). However, the literature lacks an analysis of survivability constraints and the structural integrity of RAs when exposed to geomechanical changes and the ability to withstand the impact of coal mine explosions. In this study, based on the utilization and survivability constraints, basic human requirements and the required physical specifications of RAs during …

Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation, Jeremiah John Rittenhouse

Doctoral Dissertations

"Many engineering structures can be modeled as rectangular plates, including solar cells. Carefully controlled plate vibration can be useful to solve an engineering problem, such as lunar dust accumulation on solar cells, which blocks light and reduces power generation. For this application, plate vibration at resonance is studied and used experimentally to eject lunar dust from a solar cell.

Piezoelectric actuator placement on the inactive side of a solar cell to induce vibration dust mitigation from the active side of the cell is presented in this work. Three solar cell prototypes were created and tested for efficacy, resulting in an …

Characterizations Of Eco-Friendly Class C Fly Ash-Based Alkali-Activated Mixtures For Various 3d-Printing Techniques, Fareh Abudawaba

Doctoral Dissertations

This study explored the potential of using high-calcium class C fly ash (FA) as the main precursor for synthesizing alkali-activated mortar (AAM) suitable for 3D-printed concrete (3DPC) applications. The objective was to broaden the selection of AAMs, designed to suit various printing techniques, including continuous mixing and pumping, large batch mixing, and set-on-demand processes. The study began by assessing the fresh properties of various mixtures, utilizing tests such as open time (OT), initial setting time (IST), immediate axial deformation, and penetration test (PT), to determine the mixtures' extrudability and buildability. The study optimized mixtures with a broad spectrum of cycle …

Applications Of Tetramethyl-Guanidine Supported Cationic Transition Metal Sites Towards C─N Bond Construction Methodologies And [3+2] Cycloaddition Reactions, Suraj Kumar Sahoo

Doctoral Dissertations

"We present a family of divalent cationic bipodal and tripodal M(II) reagents (M = Mn, Fe, Co) supported by superbasic tetramethyl-guanidinyl (TMG) residue framework with applications towards C─N bond construction methodologies. These cationic reagents possess unique characteristics since their enhanced Lewis acidity facilitates in situ elaboration of the primary nitrene-transfer product (aziridine). Indeed, further aziridine-ring opening and cycloaddition of several dipolarophiles (nitriles, alkenes, ketones) permits the three-component synthesis of valuable five-membered N-heterocycles, commonly found in pharmaceuticals and agrochemicals.

We undertake a more systematic study to unravel parameters that make certain divalent metal sites more suitable as catalysts for the in-situ …

Development Of Ligands And Metal Complexes With Weakly Coordinating Apical Elements And Their Application To Nitrene Insertion And Addition To C‒H And C=C Bonds, Meenakshi Sharma

Doctoral Dissertations

"We present a family of triangular coinage metal M₃Cl₃ complexes [M = Cu (I), Ag (I)] supported by antimony [Sb (III)], and bismuth [Bi (III)]-centered highly basic tetramethyl-guanidinyl [TMG₃trphen-E] (E = Sb, Bi) ligand frameworks with their applications as catalysts toward the construction of C‒N bond through aziridination and amination reaction methodologies.

The [(TMG₃trphen-Sb)Cu₃(µ-Cl)₃] catalyst gives better yields of aziridines with styrenes than [(TMG3trphen-Bi)Cu₃(µ-Cl)₃] with PhINTs as a nitrene source. However, the catalytic reactivity of both catalysts is enhanced by an electrophilic nitrene, PhINTces for …

Nano-Micro Engineering For Advanced Energy Devices, Tazdik Patwary Plateau

Doctoral Dissertations

The development of advanced materials and manufacturing techniques for energy storage devices is continuously growing. The research emphasizes micro-engineering, nano-engineering, and advanced materials science, with the goal of enhancing the performance and scalability of manufacturing methods of different materials processing with a view of achieving sustainability. In the micro-engineering domain, novel methods for fabricating thick electrodes with short diffusion paths are introduced, enabling higher mass loading and improved battery performance. Additionally, innovative strategies for optimizing the performance of carbon nanofibers (CNFs) as anode materials in LIBs are explored in the nano-engineering domain. These studies address key challenges such as inter-bonding …

A Comprehensive Analysis Of Climate Resilience Strategies For Small Island Developing States, Ashley-Ann Davis

Doctoral Dissertations

Small Island Developing States (SIDS) face unique and disproportionate challenges in their efforts to achieve climate resilience due to their geographic vulnerabilities, limited resources, and systemic economic and social constraints. This dissertation provides a comprehensive analysis of climate resilience strategies tailored to SIDS, addressing critical systemic issues and exploring interdisciplinary solutions. It synthesizes findings across four interconnected studies, including an analysis of disaster preparedness and response mechanisms in developing countries to identify gaps and opportunities for improving resilience in extreme events. The research investigates economic factors influencing energy portfolio transitions in the Caribbean, emphasizing the complexities of renewable energy adoption. …

Thermal Hydraulics Investigation Of A Horizontal Dual Channel Setup Representing Micro Nuclear Reactors Using Integrated Advanced Measurement Techniques, Zeyad Zeitoun

Doctoral Dissertations

The urgency to reduce greenhouse gas emissions has spotlighted nuclear energy as a carbon-free solution. Despite its promise, nuclear safety concerns, highlighted by the 2011 Fukushima disaster, necessitate advancements in reactor technology. The United States has prioritized the development of safer, prismatic micronuclear reactors for the coming decade, focusing on the safe operation of these facilities. These reactors' design addresses potential hazards, particularly in loss of flow accident scenarios, making the understanding of natural circulation gas flow dynamics critical. Experiments on a horizontal dual-channel plenum-to-plenum facility (P2PF) were conducted to closely mimic the conditions within prismatic micronuclear reactors. This study …

Experimental Investgation Of Core Fluid And Heat Transfer Of Pwr By Using Advanced Measurments Techniques, Saud Aldawood

Doctoral Dissertations

This comprehensive study investigates the thermal-hydraulic mechanisms and convective heat transfer characteristics within (PWRs), with a focus on (SMRs) under both single-phase and two-phase bubbly flow conditions. Specifically, the research investigates the complex bubble dynamics in two-phase flow rod bundles, which are crucial for understanding reactor behavior during loss-of-coolant accidents (LOCA). Employing an advanced experimental setup developed at the (mFReel) at MST, this work measures critical parameters such as void fraction, bubble passage frequency, bubble velocity, bubble chord length, and interfacial area concentration (IAC) using a four-tip optical probe across various locations in the rod bundle. The findings reveal that …

Power Supply Induced Jitter Analysis In High-Speed Drivers, Yifan Ding

Doctoral Dissertations

The Input/Output Buffer Information Specification (IBIS) model faces challenges in accurately simulating power-supply-induced jitter (PSIJ), particularly under nonlinear and time-varying power noise conditions with pre-driver stages. This work introduces advancements in IBIS model modification algorithms to enhance PSIJ simulation accuracy for high-speed drivers.

First, a correction coefficient-based approach was developed to adjust switching coefficients K_pu and K_pd using pre-driver DC jitter sensitivity, significantly improving model robustness under DC and AC power noise. However, its effectiveness diminished under large noise amplitudes due to coefficient shape dominance.

To address this, a simplified algorithm bypassed correction coefficient, directly correlating switching transitions with jitter …

Provenance Of The Uppermost Carboniferous–Lower Triassic Sandstones, Bogda Mountains, Nw China: Implications On The Late Paleozoic Tectonic History Of The Southern Central Asian Orogenic Belt, Sixuan Wu

Doctoral Dissertations

"The Permian-Triassic period represents a significant but insufficiently understood tectonic transition stage in the southern Central Asian Orogenic Belt (CAOB) between the Paleozoic continental amalgamation and Cenozoic orogenic reactivation. This study integrates fieldwork, petrographic, and detrital zircon geochronological data to document the trend of depositional environments, framework grain compositions, and dates of detrital zircon grains of the uppermost Carboniferous–Lower Triassic sandstones from three study areas in Bogda Mountains, the greater Turpan-Junggar basin, NW China, to decipher the spatial and temporal changes in the provenance lithology and area and reconstruct the unroofing history of the southern CAOB.

In the first part …

Metal-Organic Thin Film Coated On Optical Fiber, Nahideh Salehifar

Doctoral Dissertations

This dissertation explores the development of metal-organic framework (MOF)-based optical fiber sensors for detecting volatile organic compounds (VOCs) at low concentrations (parts-per-billion to parts-per-million). In the first part of the study, theoretical calculations were performed using effective medium approximation (EMA) models, including Lorentz–Lorentz, Maxwell–Garnett, and Bruggeman equations, to predict the refractive index changes of MOFs upon gas adsorption. These models were applied to MOFs such as ZIF-7, ZIF-8, ZIF-90, MIL-101(Cr), and HKUST-1 to evaluate their potential for gas sensing.

In the second part of the dissertation, experimental work was conducted to validate the theoretical predictions. MOF-coated optical fibers were fabricated …

On The Importance Of Novel Adsorption Processes And Structured Adsorbents For Biogas Upgrading And Storage, Kyle Newport

Doctoral Dissertations

The current adsorption processes investigated for biogas upgrading encounter severe challenges with regards to both adsorbents and processes, which necessitate the design and development of novel approaches to effectively separate carbon dioxide from methane and, hence, produce pipeline-grade renewable natural gas (RNG) as a fuel. These key challenges include (i) moderate CO2/CH4 selectivity, (ii) relatively long cycle times, (iii) high regeneration energy requirements, (iv) high-pressure drop, and (v) short adsorbent lifetime. The current biogas upgrading processes typically rely on pressure swing adsorption (PSA) or temperature swing adsorption (TSA). While PSA cycles are fast, the system requires large amounts of energy …