Digital Commons Network^™

A Geological Study Of The Irvine Ranch Area, Johnson And Campbell Counties, Wyoming, Gale E. Butterfield

Masters Theses

"The discovery of uranium in the Powder River Basin, Wyoming, by the U. S. Geological Survey in 1952 has lead to an extensive exploration program throughout the region by both private and governmental agencies. This report is a geological study of an area in the southwestern part of the basin.

Geological and radiometric mapping carried out as a part of this report indicated several areas of uranium occurrence. Some of these occurrences warrant tests by drilling.

Mineralogical and petrographic study has shown the principal uranium minerals to be carnotite and metatyuyamunite. The mineralization occurs in arkosic sandstones. Assays of the …

Internal Friction In Manganese Copper Alloys, William Paul Dixon

Masters Theses

"The study of the physical properties of the manganese-copper alloys is an intriguing one. These alloys show promise of usefulness in instances in which high internal friction is needed to reduce the noise and vibrational stresses at resonant frequencies of a part of a machine. The purpose of this study has been to learn more about the internal friction of manganese-copper alloys as a function of temperature, stress amplitude, frequency, time, and past history of the specimen. From this information the mechanism for absorption of vibrational energy is proposed, or at least some progress has been made toward its determination. …

Servomechanism Compensation With An Active Phase-Lead Network, Robert T. Dewoody

Masters Theses

"The problem is to develop a phase-lead compensation network for a servomechanism which will not reduce the low-frequency gain and thus decrease the velocity-lag error. The principal part of this thesis deals with the design of such an active phase-lead network. The active network does not have d-c coupling; this eliminates drift problems.

To illustrate an active phase-lead network a simple second order servomechanism is used as a basis for comparing three methods of compensation.

The first method is compensation with a conventional phase-lead network with a gain decrease. The second method is compensation with a conventional phase-lead network with …

Physical Properties Of Concrete At Early Ages, Curtis E. Weddle Jr.

Masters Theses

"The introduction of the motor vehicle and the subsequent rapid expansion of the highway systems of the United States have brought with them many problems.

The Civil Engineer, in his attempts to provide adequate safe avenues of travel for the populace, has been faced with many problems. Handicapped by the need for speed in design and lack of information of the trends in motor vehicle design, the engineer has been forced at times to utilize design methods inconsistent with good engineering practices.

Of the many types of pavement sections which have been designed in an effort to provide structurally and …

The Phosphoria Formation Of The Northeastern Big Horn Basin, Wyoming, William A. Beatty

Masters Theses

"Purpose and Scope. — The Phosphoria formation of the northern Rocky Mountains of the United States has received considerable attention from geologists because of its important reserves of phosphate and petroleum. In the Big Horn Basin of Wyoming, however, still more work is needed to compile the information necessary for a complete understanding of the facies changes exhibited by this formation.

The purpose of this paper is two-fold: first to present a description of the lithology and the paleontology of the Phosphoria formation in the northeast part of the Big Horn Basin, and secondly to show the stratigraphic relationship of …

A Probe For Measuring Ultrasonic Pressures, Robert F. Rohrer

Masters Theses

"In the study of acoustics, the term ultrasonics is defined as those wave motions that have frequencies greater than about 20,000 cycles per second. The characteristics of a sound wave at any point in a medium can be regarded as completely defined when the amplitude, frequency, and phase of its Fourier components are known.

Sound measurements at their best are difficult. In the last few years sensitive linear microphones and electronic amplifiers have become available. Still, there are two difficulties of prime importance with their use in a sound field. First, there is the precise, absolute calibration of the equipment …

Statistical Analysis Of X-40 (Stellite-31) Production Blends., Edward P. Patterson

Masters Theses

"An investigation was undertaken to statistically analyze the data obtained on X-40 (Stellite 31) production blends which were tested to the requirements of AMS 5382. For our purpose a blend is one or more furnace heats, the shot of which has been thoroughly mixed to produce greater uniformity of product. The mixed shot is charged to the arc furnaces and cast into parts, and test specimens. A great range of test results have been obtained in testing blends, and it was felt that a statistical analysis of a few of the variables might yield information which could be applied toward …

A Determination Of The Sonic Modulus Of Early Age Concrete, William Dale Nelson

Masters Theses

"The problem which the writer is analyzing in this thesis was suggested by Professor E. W. Carlton of the Civil Engineering Department. It is a determination, by use of sonic testing equipment, of the growth in the sonic modulus of early age concrete.

Since 1938 when T. C. Powers published his paper, "Measuring Young's Modulus of Elasticity by Means of Sonic Vibrations", in the proceedings of the American Society of Testing Materials, Vol. 38, Part II, a great deal of work has been done on the applications of sonic testing of concrete. It began a new era in concrete testing, …

The Stability Of Rectangular Plates With Built-In Supports At The Edges, John Bruce Miles

Masters Theses

"The purpose of this investigation is to derive an expression for the critical stress for a thin rectangular plate with compressive edge loading. The load is applied on two opposite edges with the remaining two edges built-in. (See Fig. 1) This is essentially a stability problem.

Rectangular plates with compressive edge loading and various edge restraints appear in a number of engineering structures. Bulkheads of ships could be so classified, as could certain components of fabricated beams and columns. The new supersonic B-58 bomber developed by Convair has a honeycomb wing structure dictated by heat conduction requirements. This, too, involves …

Filter Materials For Emergency Use In Diatomite Type Water Filters, Robert Wassell Mcleane

Masters Theses

"A completely different type of filter, using diatomaceous earth as the filter media, had been in use for many years for filtration of industrial liquids, however, the use of diatomaceous earth for water filtration purposes had been discouraged due to the rapid clogging of the filter material. "As late as 1930 it was reported that the very excellence of filtration with diatomite prevented its extensive use in water filtration except where complete elimination of bacteria and suspended matter is essential.”

Diatomaceous earth, however, seemed to exhibit the general properties the research groups were seeking; in the refined state it exhibited …

Transference Numbers Of Concentrated Manganous Chloride Solutions, Marshall L. Severson

Masters Theses

"Electrolytic conduction differs from metallic conduction only in the nature of the carrier of the current. In the case of metallic conduction the carrier is electrons. The passage of an electric current through an electrolyte occurs only by the movement of ions of opposite charge moving in opposite directions under an applied potential. The current carried by a particular ionic species is a direct function of the concentration, the charge on the ion, and the ionic mobility. A transference number is the fraction of the total current a given ion carries in a particular electrolyte undergoing electrolysis. The sum of …

The Magnitude And Directions Of Strains And Stresses In Edge Loaded Concrete Slabs, William M. Baldwin

Masters Theses

"The concrete industry in the United States represents one of the fastest growing segments of the national economy. Many reasons for this may be given, among which are, the durability of concrete structures, the local availability of a large portion of the materials used in concrete, and its wide range of adaptability to the designs of engineers and architects.

One of the most recent changes in concrete usage is the change from reinforced concrete to prestressed concrete. The term prestressed as used herein refers to any type of reinforced concrete in which the reinforcing material has a stress prior to …

Detection Of Low Energy Positive Ions By Scintillation Methods, Graydon J. Hanson

Masters Theses

"This thesis deals with the feasibility of efficiently detecting low energy positive ions, those with energies of less than several hundred electron volts, using phosphors.

The scintillation technique, first used visually and greatly improved in the last ten years by the use of a photomultiplier tube, has greatly advanced detection in high energy fields. The photomultiplier is capable of delivering milliampere pulses of current of short duration and these can be registered directly by the many electronic devices currently in use.

Extensive work has been done with phosphors which scintillate under which energy bombardment, due in part to their wide …

A Simplified Mathematical Method For Petroleum Property Evaluation, Charles G. Edwards

Masters Theses

"The economic evaluation of a petroleum reservoir involves two fundamental operations; 1) predicting future production behaviour, 2) determining the present worth or this future production. This thesis purposes to eliminate the necessity of repeated calculation which is required in performing the second operation under existing methods.

Because the first operation, that of predicting future behaviour, is necessarily an estimate, there is an apparent tendency to employ approximate methods in the determination of present worth. The evaluation method developed in this paper confines estimation to the first operation, where it rightly belongs, and treats all subsequent work with mathematical exactness.The estimation …

Some Thermodynamic And Structural Properties Of A Linear Chain Of Atoms, And Extension Of The Model To Two- And Three-Dimensional Cases, Hari Gopal Mukerjee

Masters Theses

"An attempt has been made in the present work to derive some thermodynamic and structural properties of a linear chain of atoms (under somewhat idealized conditions) moving in the fields of nearest neighbours and assuming a parabolic well in the interaction of pairs within the range of relative movements. The equation of state and other formulas derived are applicable only to the linear model which could be considered as a simplified form of one-dimensional crystals in the form of chain-like molecules of rubber-like substances. An attempt has also been made to extend the model to two- and three-dimensional cases"--Introduction, page …

The Missouri Miner, December 07, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 30, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 09, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, September 28, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, September 21, 1956

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, September-October 1956, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Missouri Miner, May 18, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, April 27, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, March 09, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, February 24, 1956

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, February 03, 1956

The Missouri Miner Newspaper

No abstract provided.

The Rollamo 1956, The University Of Missouri School Of Mines And Metallurgy

Yearbooks

No abstract provided.

An Investigation Of The Internal Friction Of Manganese-Copper Alloys, Ed. (Edward) Sickafus

Masters Theses

"Internal friction is defined as the ability of a vibrating solid to convert its mechanical energy of vibration into heat, even when completely isolated from its surroundings. (1) The most familiar manifestation of internal friction is the damping of a freely vibrating body, such as a torsional pendulum. Another example would be the increased width of the resonance peak observed when a nonelastic body is forced to vibrate over a spectrum of frequencies.(2) Internal friction manifests itself in numerous ways, and we will here be concerned with the first example cited and the potency of data gained in studying the …

Determination Of The Effect Of Air-Entraining Agents On Certain Physical Properties Of Concrete At Early Ages, James Arthur Spilman

Masters Theses

"Air entrained concrete over the past eighteen years has received national recognition as a result of its satisfactory performance in highway concrete pavements and other concrete structures subjected to outside exposure.

Numerous highway departments over the entire United States have laid test slabs made of air entrained concrete. Among those to date are Pennsylvania, New Jersey, New York, Connecticut, Massachusetts, Vermont, Maine, Illinois, Missouri and California. The primary purpose in building these test slabs was to investigate their durability or resistance to freezing and thawing and the action of various salts on air entrained concrete. The results of the test …

Investigation Of The Current Distribution On An Antenna In A Waveguide, David J. Freeman

Masters Theses

"In a communication system composed of several networks and transmission systems, it is necessary for all parts of the system to be impedance matched so that medium energy transfer is possible.

One of the recent transmission systems which has been developed is the wave guide. With the advent of the wave guide the communication engineer is immediately faced with the problem of coupling existing systems and networks to his newly found mode of transmission.

Practically this coupling problem reduces to one of feeding radio frequency energy to the wave guide with some conventional transmission line such as a coaxial line. …