Digital Commons Network^™

The Effect Of Non-Linearity On A Frequency-Modulated Wave, Tzu-Tien Hung

Masters Theses

"A method is presented for finding the effect of a nonlinear characteristic of a device on a wave which is frequency modulated by only one sinusoidal modulating wave. The distortion in the output has been found by passing a frequency-modulated wave (which is represented by a summation expression for the spectrum components) through a non-linear circuit having a Fourier series represention of its Characteristic. Two cases have been considered: (1) a nonlinear output-input characteristic, and (2) a non-linear amplitude-frequency characteristic"--Abstract, page ii.

Plastic Design Of Steel Frames For Minimum Weight, I-Chen Hung

Masters Theses

"The purpose of this study was to develop a method for weight minimization of the plastically designed frame, braced normal to its plane of action, and composed of prismatic steel members. The method accounts for the non-linear relationship between weight and moment capacity for both beams and columns. Reduction in the pure-bending fully-plastic moment in the presence of axial loading and both beam-column instability and overall frame instability due to sidesway are taken into account. Provision is made for minimization of frames employing standard sections as well as for frames whose built-up members may be chosen from a continuous spectrum. …

Tectonic Analysis Of Mare Humorum On The Lunar Surface, Adnan Said Abul-Husn

Masters Theses

"Morphology and internal structures of surface features of the Mare Humorum area were interpreted from photographs and topographic maps. The postulated origin of certain features is based on analog comparisons with known terrestrial features. The laws of crate ring and a newly developed computer program were applied to two representative classes of craters to determine the possibility of a meteoritic impact origin. Some of the craters formed by meteoritic impact and others, including those with a radius larger than 10 Km, probably resulted from volcanic activity.

Mare Humorum formed from centripetal subsidence followed by extensive lava eruptions. Spacially related rilles …

Geochemical And Petrological Study Of The Precambrian Iron Metallogenic Province Of Southeast Missouri, Geza Kisvarsanyi

Doctoral Dissertations

"The general purpose of this dissertation was to investigate and establish petrological and geochemical relationships, if any, between the Precambrian iron deposits and associated host rocks. A more specific objective was to determine the distribution of some significant minor elements in the rocks and mineral deposits and to include specific mineralogical and petrological studies of the iron deposits and country rocks important to a better understanding of the genetic and geochemical relationships ... A primary task in the investigation was the study of the trace element population of individual iron deposits and establishment of differences, if they exist, between the …

Measurement Of The Velocity And Temperature Profiles Of Air Swirling Through A Conical Shaped Nozzle, Stephen Abner Thompson

Masters Theses

"A study was conducted to determine the velocity and temperature distributions in swirling flow of air through a converging nozzle. Radial traverses were taken at three axial positions with a specially designed pitot tube constructed of hypodermic needles. The most significant finding was the large magnitude of the radial velocity component. A combination of reversed axial flow along the nozzle axis, and an outward flow near the nozzle surface was also experienced. An increase of temperature with increasing radial position may be attributed to the Ranque-Hilsch effect"--Abstract, page ii.

A Photoelastic Study Of The Stresses In A Deep Beam Using Partial Mirrors For Isochromatic Fringe Sharpening And Fringe Multiplication, Edward M. Raney

Masters Theses

"This paper is a photoelastic investigation of the stresses in a deep beam using partial mirrors to obtain isocromatic fringe sharpening and fringe multiplication. This method may be of particular value in photoelastic work for obtaining full field fringe multiplication and fringe sharpening for models which exhibit low fringe orders.

The photoelastic model used in this investigation is a deep beam with a length to depth ratio of one. A uniform load is applied over the center one-half of the beam. The beam is supported by two uniform loads distributed over a length of one-quarter the span.

A first approximation …

Modal Characteristics Of A Vibrating Truss, Edd Leighman Ghent Jr.

Masters Theses

"In this thesis, a complete technique is presented for the vibration analysis of any planar structure which can be classified in the broad category of trusses or frames. Although a theoretical backdrop is included for the' sake of completeness, the intent is to provide a technique that is readily adapted to computer usage and can be handled with a minimum of confusion or misunderstanding.

The problem is solved by the use of a displacement technique wherein the inertia and stiffness properties of a structure are calculated by superimposing the contributions of each component of the structure. The calculation of these …

Structure Contours On The Top And Base Of The M Bed, The Relationship Of Mineralization To Structures, And The Variation Of The M Bed Thickness In The Tri-State District, Missouri, Kansas And Oklahoma, Arvind A. Desai

Masters Theses

"Regional structure and thickness of a single horizon, the M bed, have been studied in the Tri-State district by picking the top and base of the M bed in the logs of 557 selected drill holes and contouring this data together with the aid of local detailed structural information available for individual mining fields. Structures determined from these data were compared to the positions of mined mineralization to determine the control of regional structure upon the localization of ore. Variations in the M bed thickness were compared to the positions of fields of mineralization to examine possible spatial relationships which …

The Anodic Dissolution Of Magnesium In Aqueous Solutions, Chen-I Lu

Masters Theses

"The anodic dissolution of magnesium was studied in MgCl₂-KC1 and MgBr₂-KBr mixtures at 25, 40, and 55 °C. The parameters of the study were current density, concentration of magnesium ion, and temperature. The concentration of magnesium ions was varied from 0.001 to 1 N holding the ionic strength constant at 1.5. The weight loss of magnesium from the electrode during electrolysis was determined by weighing the electrode both before and after electrolysis. The current was measured with a sensitive milliammeter. The range of the current densities was varied from 0.001 to 0.1 amps·cm^-2. The …

Theory Of The Lunar Photoelectron Atmosphere, Hal Emerson Mccloud Jr.

Doctoral Dissertations

"By considering the mechanics of an electron projected into an arbitrary potential field together with Poisson's equation it is possible to set up a differential equation for the electrostatic potential. The equation may be integrated and the photoelectron density found as a function of height for four approximate models. A simple model based upon monoenergetic photons and monoenergetic electrons ejected vertically upward yields rough estimates of the parameters of interest. Another model takes into account the fact that the photoelectrons are ejected at all angles. A general model takes into account the illumination of the lunar surface by solar (black …

An Investigation Of The Control Of Hydraulic Fracturing Through The Inclusions Of Prefractures, William Joseph Kabeiseman

Doctoral Dissertations

"Among the methods for determining the in-situ state of stress within the earth’s crust, hydraulic fracturing has been and is receiving much attention. This method, in principle, measures stress directly with no delicate electronic equipment required nor knowledge of the elastic modulus of the material.

This dissertation investigates experimentally whether or not control of fracture orientation can be achieved by the introduction of circular and elliptical prefractures along with sand inclusions into cast hydrostone blocks which are hydraulically fractured. A mathematical model is presented and analytically solved for the stress condition associated with a circular crack containing fluid pressure with …

Some Geological And Magnetic Characteristics Of Buried And Resurrected Precambrian Hills Of Southeastern Missouri, James Edward Palmer

Doctoral Dissertations

"PURPOSE AND SCOPE OF INVESTIGATION The major purpose of this investigation was to determine by a comprehensive study various geological and magnetic characteristics of buried and resurrected Precambrian hills of the Central Ozarks. A second important objective was the determination of characteristics which might aid in the location of buried Precambrian hills. A final objective was the testing of the magnetic surface integration method for identification and determination of depth of buried Precambrian hills.

This investigation is limited to buried and resurrected Precambrian hills of the Central Ozarks. It is concerned primarily with the structure and stratigraphy of sediments adjacent …

Re-Evaporation Nuclei And Evaporation In A Wilson Cloud Chamber, James G. Smith

Doctoral Dissertations

"Experimental techniques are developed for observing droplet evaporation in the submicroscopic size range. An expansion-compression cloud chamber with an atmosphere of tank helium saturated with water vapor is employed. This work was undertaken with the aim of examining submicroscopic droplet behavior and the existence of re-evaporation nuclei, a form of memory effect.

The theories of evaporation and nucleation on submicroscopic drop residues were re-examined, and alterations which appear to be consistent with the results of this work were incorporated into the evaporation theory.

The observed continually decreasing evaporation rate with diminishing droplet size confirms the existence of re-evaporation nuclei, but …

The Anodic Behavior Of Zinc In Aqueous Salt Solutions, Yun-Chung Sun

Doctoral Dissertations

"The increasing demand for protective metals as coatings and non-corrosive alloys has caused extensive research on the fundamental behavior of metals in corrosive media. The problem of controlling the destructive process of metallic corrosion still exists and becomes urgent in this space age. The desirablity of metals such as beryllium, magnesium, and zinc in air frame and space structural units, because of their high strength to weight ratio, has been responsible for the considerable progress in their technology in recent years.

The basic mechanism of the anodic dissolution of metals such as zinc, cadmium, and magnesium in salt solution is …

The Anodic Dissolution Of Cadmium In Aqueous Solutions, San-Cheng Lai

Doctoral Dissertations

"The purpose of this investigation was to study the effect of cadmium ions on the anodic dissolution of cadmium in salt solutions of ·constant ionic strength. The concentration of the cadmium ions was varied from 0.001 to 1 N and the current density ranged from 0.001 to 0.1 amp•cm^-2. The temperature was controlled at 25°C.

....A mathematical model was postulated expressing the anodic dissolution rate as the sum of electrochemical, local corrosion, and disintegration rates."--Abstract, page iii.

A Numerical Method For The Solution Of Cylindrical Shell Structures, Chen-Jow Hsiao

Masters Theses

"Many studies and analyses of shell structures to date have been either so complex and laborious as to preclude their application in practical design problems or so approximate, because of basic assumptions, as to limit their scope of application. Hence, a method of shell analysis which is convenient to use, reasonable in its results and general in its application is really needed. It is the purpose of this study to supply such a method of analysis.

In this investigation it is proposed to replace the shell structure which has an infinite number of degrees of indeterminancy with an analogous framework …

Absolute Soft X-Ray Dosimetry For Radiation Chemistry Studies, Howard Sajon Joyner

Masters Theses

"A homogeneous, variable plate separation ion chamber consisting of a polyethylene body and employing flowing ethylene as the cavity gas has been designed and tested for the specification soft x-ray (<75kV) energy deposition in typical hydrocarbons. The variable plate separation feature provided primary data on the differential specific ionization originating within the cavity gas occupying the effective collector volume which is independent of inherent chamber inhomogeneities associated with the electrically conducting films comprizing the chamber electrodes. These data demonstrated that charged particle equilibrium is established within the first few ten thousandths of an inch in typical solid hydrocarbons irradiated with this class of sources. Comparison of this type of chamber with a fixed plate separation, static cavity gas mode of operation showed that the latter may predict dose rates with inherent errors exceeding 100%. With the quality of electronic readout accessories presently available, the variable plate separation chamber yielded dose rate data exhibiting a probable error of 3.8 percent (plus the unknown uncertainty in the literature data on the energy required to form an ion pair), and an ultimate limiting error of less than 2 percent appears feasible"--Abstract, page ii.

Numerical Solution Of Water Hammer Analysis Including Friction Losses, Lih Hsun Weng

Masters Theses

"The water hammer phenomena is a very important problem in pipe lines and gate operations. There are many analytical solutions tor water hammer problems including friction losses, but most of them use a linear approximation tor the friction effect that is different from the actual situation. Also the existing methods for solving water hammer problems involve difficult mathematical operations that are impractical and inaccurate.

In order to find a more rapid method for solving water hammer problems including friction losses and to obtain closer agreement with the actual condition, the problem is solved here using the basic partial differential equations …

An Investigation Of Failure Patterns Of Layered Specimens Loaded In Uniaxial Compression, Narendra Y. B. Choudary

Masters Theses

"Uniaxial compressive strength for two and three-layered specimens was obtained with different thicknesses of layers and also for different length to diameter ratios. The fracture and failure pattern was studied. Shear and extension fractures were observed in the layers. Geometry and end conditions of the specimen had a great influence in the failure and fracture pattern.

The uniaxial compressive strength of a layered specimen was found to be lower than the weighted average strength and either low or high when compared to the arithmetic average strength, depending on the ratio of the heights of the layers. The compressive strength of …

The Constant Impedance Tapered Lossless Transmission Line, Yu Kuo Chen

Masters Theses

"Considerable work has been done on the theory and development of the distributed RC network which is a special case of the general distributed network type of transmission line.

Sir William Thompson analyzed telegraph cables, assuming the RC line as a model. Oliver Heaviside made numerous contributions to transmission line theory. The solution of a two-wire transmission line with constant parameters R and C is obtainable by direct solution of the telegraphist's equations which are developed from the equivalent circuit of an incremental length of the network. The sinusoidal steady-state solutions of certain tapered RC lines have been exhibited. The …

A Study Of The Development Of A Heuristic Program That Solves Symbolic Laplace Transformation Problems, Arthur E. Zackrison

Masters Theses

"A medium-speed general purpose digital computer (IBM 1620 Model II) was programmed to solve symbolic Laplace transformation problems. Although the applied mathematician and modern engineer has many uses for the symbolic solution of a problem, the potential of symbolic manipulation by a computer has not yet been sufficiently developed to help them because of many problems. This paper discusses the program and based on the author’s experience with it’s [sic] performance, clarifies the position of several of these difficulties and reaches some conclusions concerning computer solution of such problems"--Abstract, page ii.

Effect Of Artificial Roughness On Convection, Lee W. Burford

Masters Theses

"Considerable work has been done in recent years, and is still being done, to find ways of increasing the heat transfer rate in fluid heat exchangers. One particular type of potential heat exchanger that has been studied analytically, as well as experimentally, is the use of artificially roughened tubing.

The test sections used in this experiment consisted of four aluminum pipes, three of which have been artificially roughened internally by machining ninety- degree V-shape grooves along the axis of the pipes. The grooves were 30/1000, 60/1000, and 90/1000 inches in depth. The remaining pipe was a smooth test section with …

Comparison Of Plastic Stress-Strain Material Properties As Determined From Conventional Experiments, Wen Mo Chen

Masters Theses

"In problems of engineering design, it is usually assumed that the stress-strain diagrams of a given material, as obtained from different loading conditions, are the same. In fact, by using the classical theory of plasticity, it can be shown that, with an appropriate selection of stress and strain related parameters, the diagrams should coincide.

Three different materials - magnesium, aluminum and steel, have been tested under tension, compression, torsion and bending loads. Stress-strain diagrams were constructed from these observations. This thesis presents an analysis of the relative agreement between the theoretical and experimental results of these materials"--Abstract, page i.

Catalytic Effects On Radiation-Induced Polymerization Of Methyl Methacryalate, David E. Bartine

Masters Theses

"A study has been made of the effect of Kaolin clay particle size and acidity on the degree of radiation-induced polymerization of methyl methacrylate. The results indicate that the degree of polymerization varies with the clay particle size, and that the amount of polymer produced is influenced by the pH of the clay"--Abstract, page ii.

Two-Dimensional Seismic Model Studies, Joong Hee Chun

Masters Theses

"The purpose of this research was to design and construct apparatus suitable for two-dimensional seismic model studies.

A new technique for two-dimensional seismic model testing was devised which allows wide application of the equipment. This enabled the author to place the source and receiver in any desired position on the model, thereby permitting the recording of seismic events as function of distance and depth at any position

Two simple geometric models were tested to demonstrate the experimental range of the apparatus designed. The recorded data were compared with theoretical predictions and were found to be in good agreement"--Abstract, page ii.

A Procedure For Analysis Of Three-Segment Symmetrical Balcony Beams, Ronald A. Hansen

Masters Theses

"A procedure for analysis of three-segment symmetrical balcony beams unsymmetrically loaded was derived whereby the normally complicated energy solution is eliminated. A moment distribution technique is used in the solution of the first and second phases of the problem. Tables are given to aid in determining the proper distribution factors. Due to the complexity of the third phase, a table of solutions is given for varying values of length, geometry, etc.. An example problem is also given demonstrating the use of interpolation within the tables"--Abstract, page ii.

Origin And Factors Affecting Distribution Of Solid Oil In Mid-Western Missouri, Rafid Abdul-Halim Jasim

Masters Theses

"A textural analysis was made of the heavy oil-bearing sandstones in the Middle Pennsylvanian (Desmoinesian) Warner and Bluejacket formations of mid-western Missouri in order to determine and compare their depositional environments.

Grains of the Bluejacket sandstones are smaller and more rounded than grains of the Warner sandstones. The Bluejacket sandstone is also better sorted than the Warner sandstone.

The Bluejacket sandstone is thin-bedded; the Warner is mostly massive-bedded. These differences in bedding between the two formations have affected distribution of oil in the area of study.

Both the Bluejacket and Warner sandstones are better sorted than the Warrensburg sandstones; the …

A Study Of Sedimentation In A Well Regulated Major Drainage Basin - The Monongehala, Allegheny And Upper Ohio Rivers, William S. Wood

Masters Theses

"This investigation is concerned with the study of various programs employed in reducing and controlling sediment. The measures employed by the U.S. Soil Conservation and Forestry Services to control and reduce erosion, the primary source of sediment, was studied. The flood control and river navigation structures constructed and operated by the U.S. Army Corps of Engineers and the effect of these structures on sedimentation was also evaluated. State and local community regulation and control of exploited natural resources was studied to determine their influence on the generation and control of sediment.
The Allegheny, Monongehala and upper Ohio River Drainage Basin …

Cenozoic And Recent Lunulitiform Bryozoans Of The Gulf And Atlantic Coasts, Ronald Greeley

Doctoral Dissertations

"Free, cup-shaped colonies of cheilostomatous bryozoans, equipped with vibracula, are termed lunulitiform bryozoans. This group is found in sandy and calcareous Cenozoic deposits of the Gulf and Atlantic Coastal Plains. Cupuliform bryozoans are taxonomically distinct from, but in many ways similar to, lunulitiform bryozoans; the two groups are frequently found together.

Known lunulitiform genera of the Gulf and Atlantic Coastal Plains are diagnosed and their species described: Lunulites Lamarck, fifteen species, one new; Oligotresium Gabb and Horn, six species, two new; Discoporella d'Orbigny, two species; Cupuladria Canu and Bassler, two species; Selenaria Busk, one species; Otionella Canu and Bassler, four …

Calculated Cohesive Energy Of The Ordered Copper-Gold Alloy Cu Au I, Richard W. Hannum

Doctoral Dissertations

"The ordered alloy CuAu is the fifty atomic per cent alloy in the copper-gold system. It was observed by Johansson and Linde(1) and was one of the first ordered alloys to be studied by x-ray diffraction methods(Z, 3). Two ordered superlattices of CuAu are observed. CuAu I exists below 380° C and has a tetragonal structure which is a slight distortion of the face- centered cubic. It is very highly ordered, with all copper and all gold atoms in alternate (002) planes, as shown in Figure 2. CuAu II, which exists between 380° and 415° C, is orthorhombic in structure(4) …