Digital Commons Network^™

An Approximate Min-Max Solution To The Identification Problem, Richard Loyd Warren

Masters Theses

"A technique based on the min-max error criterion is proposed for identifying a dynamic system in terms of a discrete-time model from the system response to a deterministic input. A linear, single-input/single-output, lumped-parameter, time-invariant (at least during the measurement interval) system is assumed. Although the resulting problem is non-linear, it is shown that linear programming techniques are applicable if a realistic approximation is made. The technique is implemented on the digital computer and evaluated by considering a number of typical discrete-time systems. The effects of additive noise are also considered"--Abstract, page ii.

A Permeability Scaling Technique In The Numerical Simulation Of Water Coning, Virendra Kumar Dutta

Masters Theses

"A two-dimensional, two-phase, radial, horizontally layered water coning simulator was programmed for large memory digital computers. A permeability sealing technique is developed which allows the use of large size blocks as production blocks. As a result of this technique large time steps have been used without causing saturation instabilities around the well bore and the permeability scaling technique allows a more realistic simulation of a water cone. The IMPES method is used to calculate pressure and saturation in the system for each finite time step. The behaviour of the simulator is studied for various factors affecting the advance of a …

Efficiency And Loss Mechanism Of The Electro-Fluid Dynamic Momentum Transfer Process Applied To Propulsion Systems Using Atmospheric Air As The Working Fluid, Roger Coy Crites

Masters Theses

"The general equations governing EFD (electrofluid dynamic) flow are established, simplified, and solved in closed form to provide a mathematical model of an ideal EFD propulsion system. This mathematical model, in conjunction with an analysis of ion-neutral and neutral-neutral molecular collision phenomena, indicates that the cause of inefficiency in the EFD propulsion system is the system entropy increase associated with the diffusion of ion momentum through the neutral fluid. This loss mechanism is shown to be analogous to resistive heating losses in a constant voltage linear electrical network and can be minimized by obtaining minimum ion mobility. It is shown …

Surface Energy Determinations In Plexiglas, Li-King Chen

Masters Theses

"Under irreversible conditions an effective surface energy of plexiglas for notched bars deformed in three-point bending was measured. The various equations proposed for evaluating surface energy are described and values of surface energy obtained using these equations are reported for a variety of sample dimensions. A comparison has been made between the results obtained. The effect of different notch shapes, sharp V, square U and round, on calculated values and fracture characteristics are noted. The Griffith theory is shown to be valid for large crack dimensions"--Abstract, page ii.

The Design, Construction And Experimental Verification Of A Split Hopkinson Bar, Woosoon Bai

Masters Theses

"This thesis presents the design considerations for a dynamic loading device utilizing a projectile fired from a tube. Also included is a preliminary investigation of the stress-strain relation, under dynamic loading with the device, for a plaster known as Hydrostone. Design of the unit is based on the split Hopkinson pressure bar originally developed by Kolsky and on a similar unit in use at the Lawrence Radiation Laboratory, Livermore, California. The strain pulses along the pressure bars are sensed by resistance wire strain gages and displayed on an oscilloscope. The oscilloscope traces are photographed and manually digitized for insertion into …

The Dinary Numerical System And Its Applications To Modern Parallel Processing Computers, Hai Chi Koo

Masters Theses

"The Dinary Numerical System (DNS) is an extension of Binary Numerical System. By utilizing the newly developed Large-Scale-Integration technology, DNS can be implemented as a new concept of computer organization which has the merits of parallel processing. DNS consists of three field elements: they are -1, 0, and +1. Since DNS representation is not necessarily unique, new algorithms to generate the number of representations and all equivalent representations are presented in this paper. A Block-Oriented-Computer (BOC) is developed as an array of computing systems. For each of the systems, the arithmetic unit is essentially a modified Digital Differential Analyzer. The …

Probe Detection Of Microwave Perturbation In A Magnetoplasma, Show-Ran Peter Wang

Masters Theses

"When a microwave signal with a frequency near the electron upper hybrid resonance is applied to a magnetoplasma, it will excite the plasma. The perturbation of plasma can be detected by using Langmuir probes. The particular plasma used in this experiment is an argon discharge type and the density is relatively low (n~10⁸ cm⁻³). The electron temperature is about 7000º K. Because a magnetic field is applied to the plasma, it is necessary to use the probe theory in a magnetic field to calculate the electron number density from the electron temperature. In order to determine the electron upper hybrid …

Computer Time-Sharing (T-S) "An Engineering Tool" For The Engineering Applications Of The Small Company, James Binford Summers

Masters Theses

"The objectives of this investigation were to illustrate the capabilities of the time-sharing (T-S) industry, identify the means by which the small sized company, with a need to solve engineering problems, can best be served through T-S, and to present T-S to these potential users. Investigation was made of distinctive T-S services to formulate a composite of the T-S industry. Examples of three distinctive T-S services were used within this composite to exemplify the variations of services within the industry. The methods a small company could use to utilize computer services were identified emphasizing T-S as the method best suited …

Mutually Dependent Heat And Mass Transfer In Laminar Tube Flow, Gary Alfred Scheffel

Masters Theses

"An investigation is performed of the mutually dependent heat and mass transfer in laminar and hydrodynamically fully developed gas flow in a tube. Sublimation of mass occurs at the tube wall so that heat and mass transfer take place between the wall and the flowing gas stream. The wall of the tube is thermally insulated from the external environment with the result that the heat of sublimation is supplied by convective transport from the gas. The solution of this problem requires the simultaneous consideration of the energy and diffusion equations, with coupling provided by the boundary conditions. Mathematical expressions are …

Petrology And Diagenesis Of The Cyclic Maquoketa Formation (Upper Ordovician) Pike County, Missouri, Edwin Carl Kettenbrink Jr.

Masters Theses

"The Maquoketa Formation (Upper Ordovician-Cincinnatian Series) has been extensively studied for over one hundred years, but a petrographic study of its cyclic lithologies has been neglected. The following six distinct Maquoketa lithologies have been recognized in this study in Pike County, Missouri: 1) phosphatic biosparite, 2) phosphorite, 3) micrite-microsparite, 4) dolomitic shale, 5) dolomitic marlstone, and 6) dolomitic quartz siltstone. Three cycle types are present in the Maquoketa. They are expressed as thin beds (1-20 inches) of alternating micrite-shale, micrite-marlstone, and shale-siltstone. Contacts between different lithologies are sharp, indicating a primary sedimentological origin for the cycles. Precisely what mechanism was …

Simulation Of A Gas Storage Reservoir With Leakage By A Two-Dimensional Layered Mathematical Model, Steven William Ohnimus

Doctoral Dissertations

"A generalized mathematical model was developed for two-dimensional compressible fluid flow accounting for the effects of relative permeability capillary pressure, and gravity drainage in addition to the reservoir properties of rock heterogenity and reservoir geometry. The generalized model developed was applied to an aquifer gas storage reservoir in which vertical leakage occurred from the main reservoir to two adjacent overlaying zones. The experimental results of Thomas, et al. were utilized in applying the model to gas storage injection/withdrawal periods yielding reasonable results for the three layers"--Abstract, page ii.

Thermochemical Hydrogen-Deuterium Isotope Effects, Wayne C. Duer

Doctoral Dissertations

"The heats of solution at 25.0 ± 0. 1°C for each member of hydrogen-deuterium isotopic pairs (chloroform/chloroform-d, acetone/acetone-d₆, methanol/methanol-d₁, ethanol/ethanol-d₁, and water/heavy water) have been determined as a function of molality in a variety of solvents. The heats for most of the systems could be described as a linear function of average molality with an average deviation in fit of less than one per cent. Using these linear equations, heats of solution at infinite dilution were obtained by extrapolation to zero molality. The heats of solution at infinite dilution of the hydrogen containing compounds were subtracted from those of the …

Penetration In Granite By Shaped Charge Liners Of Various Metals, Hemendra Nath Kalia

Doctoral Dissertations

"The penetration in Missouri red granite by cylindrical charges with metal liners of aluminum 2011 (T-3), aluminum 7075 (T-6), yellow brass, monel, maraging steel (vascomax 250), and copper was measured. Metals having high ductility and moderate compressive strength penetrated deeper than high strength maraging steel. Aluminum required a greater standoff for optimum penetration than the other metal liners tested. Preliminary metallographic studies of the liner metals and slugs showed that the grains had elongated along the slug axis. The metals containing zinc formed very small or no slugs. The granite grains were highly fractured. The holes were discolored and coated …

Iddap -- Interactive Computer Assistance For Creative Digital Design, Richard Franklin Crall

Doctoral Dissertations

"A new computer-aided design program to assist in the initial phases of logical design is described. The program, intended for use via an on-line remote terminal, will allow the designer to study and experiment with design alternatives during the initial creative design phases. An ALGOL-like language is used for specifying the system being designed. In addition to simulating the design, the program allows the user to perform on-line design changes, reorganize data and generate timing diagram information"--Abstract, page ii.

Effect Of Axial Dispersion On Interphase Mass Transfer In Packed Absorption Columns, Virendra Kumar Mathur

Doctoral Dissertations

"A steady state approach was followed in this investigation to determine the effects of liquid and gas flow rates, packing size and packing height on the interphase mass transfer coefficient and gas phase axial mixing Peclet numbers. Experiments were performed on the absorption of carbon dioxide from a mixture of carbon dioxide and nitrogen in a packed column. Absorption was performed using 1/4, 3/8 and l/2 inch Raschig rings, with a packing height of 3 feet and also using 3/8 inch Raschig rings with a packing height of 5 feet. The liquid and gas flow ranges used were 2865 to …

Model-Referenced Adaptive Control Of Plants With Noise And Inaccessible State Vector, Donald James Schooley

Doctoral Dissertations

"The problems of process noise, measurement noise, and inaccessible process state vector in the model-referenced system of Shackcloth-Butchart-Parks (SBP) are investigated. Since the system no longer possesses a static equilibrium point, the concept of asymptotic stability does not apply. However, by using Liapunov-like ideas, the error between the plant (process plus controller) and the model is shown to enter a region about the origin if certain bounds are known. A possible technique for reducing the size of this region is to feedback a function of the error into the plant's input. Several methods of circumventing the inaccessible state vector problem …

An Investigation Of The Stiffness Of Shafts With Integral Disks, Richard King Riley

Doctoral Dissertations

"The results of an investigation of the effect of an integral disk on the torsional elastic stiffness of an axisymmetric shaft are presented. Various configurations of disk diameters and widths on a shaft of specified diameter were investigated, using a finite element method of calculation verified by experimentation. The finite element method is presented for the elastic solution of a general axisymmetric body under all possible axisymmetric load conditions. The axisymmetric body is idealized as an assemblage of triangular cross-sectioned torii representing both the normal and shear properties. The elastic stiffness is used to obtain the equilibrium equations of the …

Completeness And Related Topics In A Quasi-Uniform Space, John Warnock Carlson

Doctoral Dissertations

"Completions and a strong completion of a quasi-uniform space are constructed and examined. It is shown that the trivial completion of a T₀ space is T₀ . Examples are given to show that a T₁ space need not have a T₁ strong completion and a T₂ space need not have a T₂ completion. The nontrivial completion constructed is shown to be T₁ if the space is T₁ and the quasi-uniform structure is the Pervin structure. It is shown that a space can be uniformizable and admit a strongly complete quasi-uniform structure and not admit a complete uniform structure. Several counter-examples …

Identification Of Decomposition Products Of Tropyl Azide And Interaction Of Tropylium Ion With Nucleophiles, James Joseph Ward

Doctoral Dissertations

"An investigation of the structures of several of the products resulting from the decomposition of tropyl azide (I) and of the chemistry of related processes has been undertaken. Irradiation of samples of (I) in the vapor phase with low intensity UV G.E. Sun Lamps furnished a low melting white solid identified as tropyl troponimmonium azide (II). Earlier experiments of a similar nature reported to furnish (III) were not repeatable (Chem. Commun 276 (1967))...

Upon standing, solutions of (I) slowly formed troponimmonium azide (IV) in the cold (J. Chem. Soc. (D), 220 (1970)). The structures (II) and (IV) were confirmed by …

Investigation Into The Monotonic Magnetostriction And Magnetic Breakdown In Cadmium, James Milo Carter

Doctoral Dissertations

"Observations of the monotonic magnetostriction of cadmium at 4.2 K and in fields of 65 kilogauss have been made. The angular dependence of an extremal point (H_m) in the monotonic magnetostriction is found to follow inverse cosine behavior. The magnitude of H_m (27 kG) for fields parallel to [0001] is in fair agreement with the onset of γ_1/3 from the breakdown of the trifoliate orbit, γ. The range of observation of h_m coincides with the reported range of the trifoliate orbit. A "klink" in the monotonic magnetostriction is demonstrated. The "klink" field, H_k, …

Numerical Simulation Of Forward Combustion In A Radial System, Tommie C. Wilson

Doctoral Dissertations

"A generalized mathematical model is described for the thermal recovery of oil in a radial system in which there are conductive heat losses to the surrounding formations, three phase fluid flow, conductive-convective heat transfer within the producing formation, combustion, and aqueous-phase changes considered. The mathematical form of the temperature equation requires that numerical solutions be obtained with a digital computer for which the numerical approximations of the partial differential equations are presented and the results discussed. The analysis is applied to field size simulations of a forward combustion project to permit direct field analyses of significant importance for accurate reproductions …

The Evaluation Of Radar Guided Missile Performance Using Various Target Glint Models, Franklin Delano Hockett

Masters Theses

"A radar guided missile seeker approaching a target arrives at a crossover point beyond which the entire target is illuminated by the missile seeker's radar antenna beam. When this occurs, for a complex target, the radar senses a time changing target center location which may greatly complicate the terminal tracking portion of the seeker's flight. This thesis documents various glint models in use today and compares the performance of these models by using a seeker model to determine the effect of glint on terminal tracking performance. A large volume of data has been compiled describing various radar characteristics of complex …

A Study Of Microstrip Transmission Line Parameters Utilizing Image Theory, Joseph Louis Van Meter

Masters Theses

"This paper is a theoretical investigation of the potential, electric field, capacitance, and characteristic impedance of the open strip transmission line or microstrip configuration based upon the classical Thomson Image Technique. It provides the basis for determination of the charge distribution on the strip and reports impedance values which compare favorably both with experimental values and theoretical work in the current literature"--Abstract, page ii.

Application Of The Weiss Molecular Field Theory To The Lattice Of The B-Site Spinel, Wayne Edmund Holland

Masters Theses

"The Weiss molecular field theory has been applied to the lattice of the B-site spinel. The forms of the ordering temperatures and the asymptotic Curie temperature have been determined for a sixteen-sublattice model with collinear spins. The theory has been applied to the problem of determining the exchange integrals for systems of the form Aa₁₋ₓAbₓCr₂X₄ and ACr₂Xa_4(1-y)Xb_4y. The theoretical results have been compared to the experimental data for the systems Hg₁₋ₓCdₓCr₂S₄, Zn₁₋ₓCdₓCr₂Se₄, and CdCr₂S_4(1-y)Se_4y in an attempt to determine the exchange integrals"--Abstract, page ii.

Magnetohydrodynamic Channel Flow With Non-Uniform Inlet Velocity Profiles, Gwok-Liang Chen

Masters Theses

"An analysis is made of laminar magnetohydrodynamic (MHD) flow development in the entrance region of a parallel-plate channel. The problem is formulated in general for any velocity distribution at the channel inlet by extending the linearization method of Sparrow, Lin, and Lundgren for non-MHD duct flows. This method involves linearization of the inertia terms in the equation of motion by introducing a stretched axial coordinate. A closed form solution is obtained for the velocity distributions which are continuous across the channel and along the length all the way from the entrance to the fully developed region. An expression for the …

Amino Acid Sequence Of An Iodotyrosyl-Containing Peptide Produced By Tryptic Digestion Of Thyroglobulin, Pai-Chun Chiang

Masters Theses

"Thyroglobulin was digested with trypsin. An iodotyrosyl-containing peptide was isolated from tryptic digests by a combination of electrophoresis and paper chromatography. The amino acid sequence of this peptide was determined by applying the Edman degradation and by using the proteolytic enzyme, carboxypeptidase A. The sequence of this peptide is: NH₂-Ala-Ile(Leu)-Ala-Ser-Phe-Gly-Asp-Tyr-Glu-Phe-COOH The importance of the position of the tyrosyl residue which is iodinated to form monoiodotyrosine (MIT) , diiodotyrosine (DIT) , and thyroxine (T₄) is considered in connection with the structure-activity relationship of the protein"--Abstract, page ii.

Linear Analysis Of Pneumatic Dashpot Damping, Nathalal Gordhanbhai Patel

Masters Theses

"The linear analysis of pneumatic damping with orifice or capillary restrictions and with or without mean flow is presented. Temperature and pressure relationships are derived from energy considerations rather than the usual simplification of an assumed polytropic coefficient. Analytical results are compared with the experimental results and a coefficient of heat transfer, C_h, is defined for calculation of the equivalent linear damping factor C_d"--Abstract, page ii.

Behavior Of A Remolded Silty-Clay Subjected To Sequential Loading, Lawrence Tsi-Ching Chung

Masters Theses

"The investigation was undertaken to determine shear strength and pore pressure parameters of a soil when subjected to sequential loading. This method is intended to similate the in-situ condition of stress application under certain field conditions. The testing procedure, a sequential triaxial shear test, is described. This test consists of successive stages of partial consolidation followed by undrained shear. Triaxial consolidation and shear strength characteristics of a sedimented remolded silty-clay are compared with the results from conventional tests on isotropically consolidated samples. The undrained strength was found to be a function of moisture content, irrespective of the method of test …

Shear Strength Characteristics Of Crushed Glass, Fred Ray Browning

Masters Theses

"Drained and undrained triaxial compression tests were performed on two gradations of crushed glass in order to determine the compressibility and shear strength characteristics. Consolidation pressures varied from 10 to 100 psi. Volume changes during consolidation were discussed because of the dependency of shear strength behavior on the density condition at the end of consolidation. Stress-strain-volume change characteristics were observed in order to discuss the load-deformation and dilatancy relationships and the effects of varying density, gradation and consolidation pressure. Stress-strain properties were also determined for the undrained tests. The undrained tests were constant volume tests, thus having no dilatancy effects. …

Thermal Stresses In Circular Plates Including The Effect Of Transverse Shear Deformation, An-Ton Liu

Masters Theses

"This thesis is an extension of the work of T. F. Lehnhoff which used the method suggested by Goodier to develop the Reissner-Goodier small displacement theory for plates subjected to lateral loading. The purpose of this work is to develop a more complete Reissner-Goodier small displacement theory for plates under general loadings, both lateral and thermal, and to provide a solution to the six governing coupled partial differential equations by using a process similar to that of Lehnhoff. Any loading, lateral and/or thermal, that satisfies the Dirichlet conditions of Fourier analysis and virtually any boundary conditions may be handled. Most …