Digital Commons Network^™

Noise Power Estimation Based On Data Of Finite Sample Size., John Michael Koly

Masters Theses

"The method of z-transforms is used to derive the error performance of an average noise power estimator that utilizes data of finite sample size. Rectangular and trapezoidal integrators are employed by the estimator. Theoretical performance of each integrator is derived as a function of the number of samples utilized to form the estimate"-- Abstract, p. ii

An Algorithm For Minimizing The Riding Time Of Students On School Buses., Dennis Ray Morgan

Masters Theses

"This thesis presents an algorithm which selects from a given set of stops a subset of stops corresponding to a given bus which minimize the riding time of students in going to and from school. The time required in picking up students at their stops and delivering them to school is analyzed. An example is given which illustrates the formulation of a problem and the results obtained from the solution. Finally, the program which was used in the solution of the problem is given along with its implementation"-- Abstract, p. ii

Two-Dimensional Radiant Interchange In A Non-Isothermal Cavity Formed By Two Semi-Infinite Parallel Plates., Robert David Allen

Masters Theses

"Two-dimensional radiant interchange between non-isothermal, gray diffuse surfaces with non-uniform radiosity have been investigated for a cavity formed by two semi-infinite parallel plates. The problem is solved for two specific emissive power distribution models. Both emissive power distributions decay exponentially with depth into the cavity. The first emissive power distribution varies in a cosine manner across the front of the plates and the second has a step variation across the front of the plates.

For the cosine varying model, separation of variables and Ambarzumian's method are applied to obtain an integro-differential equation for the radiosity inside the cavity, an integral …

Barometric And Pump Test Determination Of The Characteristics Of A Carbonate Aquifer In The Vicinity Of Norman Creek, Phelps County, Missouri., Somchai Wongsawat

Masters Theses

"Carbonate rock aquifers underlie many parts of Missouri. As population and water use increase, these aquifers will increase in importance as sources of water supply. The purpose of this study is to investigate the applicability of barometric calculations and a variety of pump test evaluation equations to a shallow confined doloii mite aquifer. The aquifer is the upper Gasconade Formation of Lower Ordovician age in the vicinity of Norman Creek, south central Phelps County, Missouri.

The response of water level to atmospheric pressure showed that the carbonate aquifer in this study site has a rather high barometric efficiency (B_{av …}

Thermal Fragmentation Of Rock - The Influence Of Temperature Dependent Material Properties., James Dale Scheller

Masters Theses

"This investigation is concerned with a thermal rock fragmentation system employing heat to create subsurface thermal inclusions. The effectiveness of this system as applied to three different rock types is studied. The rock types are Dresser basalt, Charcoal gray granite, and Sioux quartzite. Also, the influence of temperature dependent material properties is investigated.

The actual three-dimensional problem of in situ rock fragmentation involves parallel rows of equally spaced holes drilled to a constant depth. A heat source at the bottom of each hole creates a thermal inclusion resulting in a stress field causing fracture.

Axisymmetric models of the fragmentation system …

Post Irradiation Changes Of The Elastic Modulus Of Aluminum, Dale A. Powers

Masters Theses

"Aluminum samples of 99.99% and 99.999% purity were irradiated to neutron fluences of 3·8·10¹⁸ nvt and 1.4·10¹⁹ nvt (E greater than 0.1 Mev) at one-third of the melting temperature. The change in Young's modulus of elasticity after isothermal annealing in the temperature range of 110⁰C to 130⁰C was measured. After 2.5 hours of annealing, the modulus reached a steady state value which was decreased by 0.25% ± 0.17% from the unannealed value. Electron microscopy suggests the hardening mechanisms were dispersion hardening by silicon precipitates and void hardening"--Abstract, page ii.

Combined Forced And Free Convection On A Vertical Cylinder And Flat Plate, Aleksandros Mucoglu

Masters Theses

"In the study of fluid flow over heated surfaces, it is customary to neglect the effects of buoyancy force when the flow is horizontal. However, such a practice is not justified when the forced flow is along an inclined or a vertical surface, because under these conditions the buoyancy force modifies considerably the flow field and hence the heat transfer rate from the surface. Such a flow is termed combined forced and free convective flow.

The present study is concerned with the effects of buoyancy force on forced convection along an isothermal vertical cylinder and a flat plate. This type …

Investigation Of The Electric Field In The Vicinity Of A Water Drop Adhering To A Conductor, Jamnarn Hokierti

Masters Theses

"Electric field calculations in the vicinity of a conductor above ground are developed with constraints on the distance from the conductor for which the electric field equations can be applied for practical applications. The electric field in the vicinity of a small water drop adhering to the conductor has been calculated. Application of this electric field in the vicinity of the water drop has been used to compute the apparent surface charges and also the forces on the small water drop surface. Methods for the calculation of space charge due to ionization on the water drop has been suggested"--Abstract, page …

Linear Geometry, Phyllis L. Thomas

Masters Theses

"This paper contains material suitable for a one semester course in linear geometry where the student has had a one semester course in linear algebra previously. It compiles information in the areas of affine sets, affine geometry, convex sets, and a few applications. Also included are Caratheodory's theorem and the well-known theorem by Helly as proved by Radon"--Abstract, page ii.

Laser Holographic Interferometric Investigation Of Heat Transfer About An Isothermal Vertical Flat Plate, Richard Michael Quinlisk

Masters Theses

"A study of the laser holographic interferometer was conducted to compare heat transfer data obtained with the device to standard free convection boundary layer theory. The system studied was an isothermal vertical flat plate. The interferometer was used to obtain fringe patterns of the boundary layer at the plate surface.

Data from the holographic interferograms were recorded by making conventional two-dimensional photographs of the holographic images.

The optical data are shown to have a good correlation to Von-Karman theory. Values of the boundary layer thickness, temperature distribution, and heat transfer were compared. An attempt was made to probe the boundary …

Electrical Cable Design And Applications, Robert William Buente

Masters Theses

"The materials available for constructing various electrical cables are discussed, along with remarks/ pertaining to the attributes and limitations of each. The installation and maintenance considerations are discussed in detail. Electrical considerations involved with designing a cable system are outlined with references to their specific application. Special cable constructions, their applications, and their typical modes of installation are reviewed. The conclusion explains an overall cable system design approach along with miscellaneous information"--Abstract, page ii.

Calculation Of The Neutron Flux In The Side Regions Of The Prestressed Concrete Reactor Vessel Of A High Temperature Gas Cooled Reactor, Richard Robert Kent Jr.

Masters Theses

"Neutron flux in the side regions of the High Temperature Gas Cooled Reactor's (HTGR) Prestressed Concrete Reactor Vessel (PCRV) was determined using the Monte Carlo method. One quarter of the PCRV was modeled, with all major structures inside it, e.g. steam generator, auxiliary cooling loop, etc. imaged at their exact position and size. Initial neutron energies range from .001 eV to 3 MeV. Three neutron interactions were considered: absorbtion, elastic scattering, and inelastic scattering.

The flux was calculated for two different PCRV temperatures, 155° F and 647° F. The thermal flux showed a minor increase at the higher temperature. In …

A Study Of The Subsurface Stratigraphy Of The Upper Cambrian In Western Missouri, Joseph L. Thacker Jr.

Masters Theses

"Megascopic examination of diamond-drill cores supplemented by insoluble residue data provides a usable means of studying the lithologic characteristic of Upper Cambrian strata in the subsurface of western Missouri.

The stratigraphic relationships within each Cambrian formation and the relationships of each Cambrian unit to formations above and below are discussed.

The relationship of Upper Cambrian strata to the Precambrian surface in western Missouri and easternmost Kansas is illustrated. The Lamotte Sandstone is overlapped by the Reagan Sandstone against Precambrian topographic highs and the Bonneterre and lower Davis are replaced by sandstones similar to the Reagan in southwest Missouri and southeast …

Determination Of Oxygen Chemical Diffusion Coefficients In Single Crystal Strontium Titanate By Capacitance Manometry, Douglas Bugh Schwarz

Masters Theses

"The use of the tensi-volumetric apparatus to study the non-stoichiometric behavior of strontium titanate was discussed. Oxidation kinetics of reduced single crystal strontium titanate were measured with an ultrasensitive capacitance manometer as the sample absorbed oxygen in response to a changing oxygen activity.

The oxidation kinetics were found to fit a solution to Fick's second law for rectangularly shaped samples....

The procedure selected for measurement of the oxidation kinetics, and the method of obtaining diffusion coefficients from the oxidation data was discussed along with potential sources of error of the system"--Abstract, page ii.

Metal Salt Catalyzed Carbenoids The Catalysts In Trialkyl Phosphite Copper (I) Complex Catalyzed Decomposition Of Diazo Compounds, Nguyen Van Thinh

Masters Theses

"Partial rate data, asymmetric induction studies, interrupted experiments and additives studies indicate that copper(I) salt-phosphite complexes are destroyed during the course of reactions with dimethyl diazomalonate (1) and ethyl diazoacetate (2). All evidence is consistent with the copper(I) being oxidized to copper(II) and copper(0) being oxidized by impurities in the olefin which most probably are hydroperoxides.

Several new copper(I) salt-phosphite complexes were prepared and examined but none proved as effective for decomposing (1) as copper(II) bis acetylacetonate.

The utility of the copper (I) chloride-trimethyl phosphite complex for decomposing (1) is a function of the means of preparation. The three general …

Kalman Filter Equalization For Qpsk Communications, Tze-Shen Lee

Doctoral Dissertations

"The discrete complex Kalman filter is considered as an equalizer for quadrature phase shift keyed (QPSK) systems in the presence of additive noise and intersymbol interference (ISI). For a known linear time-invariant channel with finite duration impulse response, the finite n-dimension complex Kalman filter equalizer is able to reduce the degradation caused by ISI. When the channel is unknown, an adaptive Kalman equalizer is used in which the channel complex tap gains are estimated by decision feedback. A two component multipath channel QPSK system is used as an example. Using the Chernoff upper bound to calculate the error probabilities, the …

The Chemical And Electrochemical Oxidative Decarboxylation Of Methyliminodiacetic Acid In Acid Media, Rita Kathleen Hessley

Doctoral Dissertations

"Methyliminodiacetic acid (MIDA) is oxidized with cerium. (IV) in both perchloric and sulfuric acids to give sarcosine, formaldehyde, and carbon dioxide"--Abstract, page 2.

In Vitro Studies Of Lipid Uptake By Medical Grade Silicone Rubbers Used For Heart Valve Balls, Shu Hua Wu

Doctoral Dissertations

"Various chemical and physical aspects of high lipid absorption by medical grade silicone rubber and the dynamic mechanical properties of lipid-rubber systems were studied in order to provide an insight into the problem of 'variance' of these materials when subjected to 'in vitro' and 'in vivo' environments. Wide variations of post cure procedures of the silicone rubber were studied. Different post cures did not appreciably affect the mechanical properties of the silicone rubber. Mass transfer studies demonstrated that the diffusion of linolenic acid into a silicone rubber slab is a purely physical diffusion process (D = 3.2 x 10^{-3 …}

A Finite Element Method For Three-Dimensional Analysis Of Metal Forming, Nguyen Don Phu

Doctoral Dissertations

"The importance of metal forming by extrusion was reviewed. A Finite Element Approach was developed to analyze extrusion processes. A brick type linear element and the Upper Bound theorem were used to analyze the extrusion of a cylindrical billet into a square cross-section prism. A minimization technique for a non-linear functional with linear constraints was developed. Different types of boundary conditions were also formulated. A frictionless extrusion was simulated using the computer program developed. Velocity profiles at different sections of the deforming solid were obtained and an average extrusion pressure was predicted for a given area reduction ratio.

Extrusions from …

Transition Boiling Of Normal Pentane From A Horizontal Flat Gold Surface, Ronald M. Canon

Doctoral Dissertations

"The characteristic boiling curve for Normal Pentane was determined at 1 atmosphere pressure with particular attention devoted to the transition boiling region. The heat transfer surface was a horizontal, gold-plated, copper disc.

Stability analysis was employed to demonstrate why previous investigators have had only limited success in collecting data in the transition region and to provide a valid basis for equipment designed to operate in this region.

A method of predicting the transition region boiling curve from the nucleate curve and the Liedenfrost point is presented. The method was found to predict the transition boiling of Normal Pentane, Freon 12, …

Direct And Inverse Heat Conduction In Rock Materials Using The Finite Element Method, Vernon Dale Allen

Doctoral Dissertations

"A finite element method is presented for solution of direct and inverse heat conduction problems in rock materials. Finite element programs for direct and inverse heat conduction problems were developed and demonstrated. Flow charts are given for the finite element programs.

The direct finite element heat conduction program changes material properties with temperature to approximate the temperature dependent properties of rock materials. An example problem was solved by the finite element method and also using Kirchoff's transformation. The finite element solution compared quite well with the Kirchoff transformation solution.

The inverse method utilizes the direct finite element heat conduction program …

Double Reflection Dips - From Grating Ruled Semiconductors, Le-Fu Teng

Doctoral Dissertations

"The double dips, previously observed by Fischer, Anderson, et al., which appeared in the reflection spectra of grating surfaces on the Te-doped semiconductors GaAs and InSb around the plasmon and phonon frequencies have been measured in more detail. In the plasmon region, several possible explanations of the phenomenon are discussed. A simple equation checked with the rigorous theory is proposed and is shown to fit the data well. In the phonon region, the extra dip is calculated and identified as being caused by surface phonons"--Abstract, page ii.

On Interaction In The Two-Way Aov Model Without Replication Including Power Comparisons Of Two Tests For Non-Additivity, Victor John Hegemann

Doctoral Dissertations

"Data analysts have long been concerned with the problem of giving a complete analysis of the two-way crossed classification design with one observation per cell when interaction is present in the data. Conventional tests of hypotheses and statistical inferences are not applicable in this case since an estimate of the error variance is not available. Transformation of the data to additive data has been one solution to this problem; however, interpretation of the physical units of the transformed data is difficult. Recent contributions to the analysis of this design include a test for interaction, a test for testing differences in …

Dropwise Condensation As Affected By Vapor Diffusion And Molecular Sticking, Salil K. Banerjee

Doctoral Dissertations

"Experimental values of heat flux in dropwise condensation on a gold plated vertical copper surface were determined in presence and absence of (or minute traces of) noncondensable gas. The noncondensable gas concentration varied from 0.0045% to 7.5% over a range of subcooling from 2.155 to 17.13°F and system pressure of 4.124 to 16.67 psia. The calculated heat transfer coefficient ranged from 1,545 to 11,135 Btu/hr-ft²-°F. In the part of the experiment where precautions were taken to avoid the presence of noncondensable gas in the water vapor, much higher values of heat flux were observed. Values of heat transfer coefficient ranging …

Measurements Of Condensation Coefficient Exhibited By Water Drops Grown On Rural Cloud Nuclei, Abbas M. Sinnarwalla

Doctoral Dissertations

"Values of condensation coefficient, ß, were experimentally determined for water drops grown on cloud nuclei in atmospheric air samples. The measured quantities were supersaturation, final drop size (6 to 7.5 µm radius), and time to grow from near dry radius to final radius. The drops were grown in a vertical-flow thermal diffusion chamber, at supersaturations near 0.5 and 1.0%. The final drop sizes were large enough so that ß did not depend upon the size of the nucleus producing a given drop. The average value of ß was 0.025 with a standard deviation of about 0.01"--Abstract, page 2.

Process Optimization By Flow Sheet Simulation, Larry Dale Gaines

Doctoral Dissertations

"PROPS, (Process Optimization System), has been used to simulate and optimize the Universal Oil Products solid phosphoric acid catalyst process for producing gasoline. PROPS, a modified version of CHESS (Chemical Engineering Simulation System), performs a complete design and economic evaluation of the process for each set of independent variables. The computational time during optimization was reduced by the use of a regression equation to determine K-values as a function of temperature and pressure. K-value data used for the regression was generated from the Chao-Seader correlation using mixtures of the gasoline components to be encountered during optimization. The regression equation produces …

Metal Salt Catalyzed Carbenoids Ii, Robert Stephen Mcdaniel Jr.

Doctoral Dissertations

"The interaction of diazomalonic esters with olefins in the presence of homogeneous Cu(II) catalyst species has been examined relating to olefin structure effects and catalyst structure effects using partial rate data as a method of determining the mechanistic aspects of the various reactions.

It has been possible to examine the mechanistic details of cyclopropanation, C-H insertion, and both "dimer" forming reactions.

Cyclopropanation proceeds via a transition state including olefin, copper (II), ligands, and carbene C-H insertion results from hydrogen abstraction prior to collapse of the transition state. "Dimer" is formed by the attack of diazo compound on the carbenoid carbon, …

Methods And Applications Of The Mean-Variance Portfolio Selection Model, John W. Marsh

Doctoral Dissertations

"The Mean-Variance portfolio selection model, or Efficient Market model, is examined in terms of the small investor. The performance is first tested on the small sample space of the thirty Dow Jones Industrials. The results show that it is possible to outperform the market by investing in the minimum-variance, or safest, portfolio. The Critical-Line algorithm as developed by Markowitz and modified by Sharpe is used in this analysis.

Since the Critical-Line algorithm is very time-consuming and does not always converge to a solution, an alternate algorithm is developed. This algorithm, referred to as the “Simplified Algorithm”, is designed to find …

Kinetic And Thermodynamic Acidities Of Selected Weakly Acidic Hydrocarbons, Darrell R. Strait

Doctoral Dissertations

"The kinetic and thermodynamic acidities in methanol for bromoform and phenylacetylene have been determined at various temperatures. The thermodynamic acidities of phenylacetylene were obtained through a quench method which involved tritium tagging of the phenylacetylene anions present at equilibrium. With the use of this method, a pK_a of 18.34 for phenylacetylene at 0ºC was obtained. Through the use of these acidities, it was shown that the kinetics for these proton exchange processes are not diffusion controlled.

Isotope effects ( k_H/ k_D) were obtained for chloroform, bromoform and phenylacetylene at three temperatures (0ºC, -10ºC and -20ºC). …

On Integrability And L¹ Convergence Of Certain Cosine Sums, John William Garrett

Doctoral Dissertations

"Rees and Stanojevic altered the standard cosine series and obtained a necessary and sufficient condition for integrability of the altered sum. Here these sums are generalized, and it is shown that such sums converge in L¹-norm"--Abstract, page iv.