Digital Commons Network^™

Evaluation And Design Of A Footing Hybrid Connection For Innovative Hollow-Core Fiber-Reinforced Polymer–Concrete–Steel Composite Columns, Mohanad M. Abdulazeez, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To support the advancement of accelerated bridge construction in high-seismic regions, this study investigates a novel prefabricated column-to-footing connection designed for improved resiliency, constructability, and cost efficiency. The socket connection utilizes hollow-core fiber-reinforced polymer–concrete–steel (HC-FCS) columns with embedded corrugated steel pipes (CSPs). The composite HC-FCS column consists of a concrete shell sandwiched between an outer fiber-reinforced polymer tube and an inner steel tube. The inner steel tube is embedded into the footing connection of the HC-FCS column. The same authors tested the innovative socket connection on a large HC-FCS column under seismic loads, showing high ductility, strong moment and drift …

Impact Of Bubble-Induced Turbulence On Two-Phase Flow Dynamics At High Void Fraction In A Large Diameter Channel, Sungje Hong, Joshua P. Schlegel, Subash L. Sharma

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This study represents the first investigation into the influence of bubble-induced turbulence (BIT) on interfacial area transport mechanisms in gas–liquid two-phase flows under conditions of high void fraction and high velocity in a large diameter channel. Given the unique characteristics of bubble flow in larger channels, the turbulent effects induced by bubbles differ from those observed in smaller channels. However, limited research exists regarding the impact of BIT beyond bubbly flows in large-diameter channels. To address this gap, two approaches for implementing the BIT model are explored: a direct method and an indirect method. This paper assesses both the general …

Special Issue: Innovative Numerical Approaches For Problems In Science And Engineering, Xiaoming He, Shuhao Cao, Qiao Zhuang

Mathematics and Statistics Faculty Research & Creative Works

No abstract provided.

Equilibrium Stability Under Nuclear Confrontation, Martin Bohner, A. A. Martynyuk

Mathematics and Statistics Faculty Research & Creative Works

This article proposes and analyzes mathematical models of confrontation between two and n countries, including countries with nuclear weapons. The proposed models are based on a generalization of Richardson's well-known mathematical model of the arms race. Namely, the factor of hostility is filled with expanded content, including public opinion and the armed forces of the opposing countries. Qualitative analysis of confrontation models is carried out by the method of Lyapunov functions and by applying nonlinear integral inequalities. As a result of the analysis, the conditions for the stability of the equilibrium state of the opposing countries are established, and the …

Threshold Asymmetric Conditional Autoregressive Range (Tacarr) Model, Isuru Ratnayake, V. A. Samaranayake

Mathematics and Statistics Faculty Research & Creative Works

This paper introduces a Threshold Asymmetric Conditional Autoregressive Range (TACARR) model for analyzing the daily price ranges of financial assets. The proposed formulation assumes that the conditional expected range switches between two regimes, representing upward and downward market states, with the disturbance distribution also allowed to vary across regimes. A self-adjusting threshold component, determined by past values of the series, is used to identify the prevailing market regime. In this way, the model is able to capture asymmetric and heteroscedastic volatility behavior in financial markets. The TACARR model is designed to address several limitations of existing price range models, including …

A Transdisciplinary Approach To Advancing Water Security And Public Health: The “Nurse + Engineer” Model For Achieving Sustainability In Wash Systems Using Community-Based Participatory Research, Daniel B. Oerther, Sarah Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Human health is linked to the health of the environment, a concept referred to as planetary health. As environmental challenges become increasingly complex, single-disciplinary approaches are insufficient to achieve sustainable solutions. This article presents a transdisciplinary framework, termed the "Nurse + Engineer" model, as a novel methodology for addressing complex problems at the nexus of environmental engineering and public health. The model integrates the technical design and systems-level thinking of environmental engineering with the community-based, patient-centered care of nursing. This work details the key lessons learned from the retrospective application of this framework to a series of multi-year, community-based participatory …

First Remi Experiments At A Cryogenic Ion Storage Ring, M. Schulz, F. Herrmann, W. Zhang, A. Dorn, M. Grieser, F. Grussie, H. Kreckel, O. Novotny, A. Wolf, T. Pfeifer, C. D. Schröter, R. Moshammer

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

We have recorded double, triple, and quadruple coincidences between neutralized projectiles, recoiling target ions, and two electrons created in collisions of slow anions with neutral atoms. The experiments were performed at the cryogenic storage ring in Heidelberg. The recoil ions and ejected electrons were momentum-analyzed using a Reaction Microscope (ReMi) spectrometer. Various processes involving electron detachment from the projectile accompanied by various transitions in the target were investigated. Detachment without any transition in the target is qualitatively well described by a quasi-free electron model in the case of an Ar target. In detachment with single target ionization, no signatures of …

Environmental Engineers Develop Solutions To Problems Of Planetary Health: The Legacy Of Professor P. Aarne Vesilind, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The principal ethical obligation of the engineering profession, to "hold paramount the health, safety, and welfare of the public," has been challenged for decades. Professor P. Aarne Vesilind identified two primary deficiencies: an anthropocentric bias that values nature only instrumentally and the use of non-mandatory, aspirational language for environmental protection, which resulted in the exclusion of enforceable environmental canons. This paper argues that two recent developments provide a comprehensive response to Vesilind's recommendations for engineering ethics. First, the United States Bureau of Labor Statistics has redefined environmental engineering as "developing solutions to problems of planetary health." Second, Oerther proposed a …

Smartflow: A Communication-Efficient Sdn Framework For Cross-Silo Federated Learning, Osama Abu Hamdan, Hao Che, Engin Arslan, Md Arifuzzaman

Computer Science Faculty Research & Creative Works

Cross-silo Federated Learning (FL) enables multiple institutions to collaboratively train machine learning models while preserving data privacy. In such settings, clients repeatedly exchange model weights with a central server, making the overall training time highly sensitive to network performance. However, conventional routing methods often fail to prevent congestion, leading to increased communication latency and prolonged training. Software-Defined Networking (SDN), which provides centralized and programmable control over network resources, offers a promising way to address this limitation. To this end, we propose SmartFLow, an SDN-based framework designed to enhance communication efficiency in cross-silo FL. SmartFLow dynamically adjusts routing paths in response …

Metagenomic Polymorphic Toxin Effector And Immunity Profiling Predicts Microbiome Development And Disease-Related Dysbiosis, Hunter W. Schroer, Francesco Beghini, Juan Antonio Raygoza Garay, Nicholas A. Christakis, Dustin E. Bosch

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Bacteria use antagonistic interbacterial weapons, such as polymorphic toxin secretion systems (TSS), to compete for niches in the human gut microbiome. We hypothesized that TSS influence gut microbiome development and disease-related dysbiosis. We developed a bioinformatic marker gene approach (PolyProf) to quantify TSS including ~200 effector and immunity genes and applied it to ~15,000 publicly available human metagenomes. PolyProf alpha and beta diversity readily distinguished 12 different human disease states and enabled the construction of highly accurate linear regression classifier machine learning models. Elastic net machine learning models integrating bacterial taxonomy with PolyProf had strong predictive value for 12 disease …

Sme Ai Outreach In Finland—A Case Study, Kaj Mikael Björk, Anton Akusok, Amaury Lendasse, Leonardo Espinosa-Leal

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper presents a project (work in progress) where entrepreneurship and higher education in AI (from Master level to postdoc level) are integrated in order to produce a dual effect; helping SMEs to gain insight in how AI can aid in the corporate environment and to expose AI researchers to the real-life situations in the company world. If successful, the companies are made ready for the AI revolution and the researchers more equipped for corporate settings. The project is ongoing, so this paper addresses a work-in-progress project. The paper reflects on the project as well on some aspects that need …

Design Of Novel Gating Systems For Steel Castings, K. Balasubramanian, Laura Bartlett, M. Xu

Materials Science and Engineering Faculty Research & Creative Works

Gating systems play an important role in determining the quality and mechanical properties of castings. To understand the efficiency of gating systems, four systems, namely pressurized system, non-pressurized system, naturally pressurized system with a side riser and a naturally pressurized system with a top riser, were studied. The naturally pressurized systems were provided with overflows which collected the incoming metal swirl. Parameters like velocity of metal flow, air entrapment, microporosity and Niyama criterion were considered, and a design was developed with a common pouring basin. 8630 alloy was poured into two molds using a teapot ladle. The inclusion analysis revealed …

Microstructure And Properties Of Oxide Dispersion-Strengthened Alloys, Ertugrul Demir, Seung Min Ha, Anish Ranjan, Xingshuo Zhang, Aaron Penders, Mukesh Bachhav, Xiaochun Li, Lin Shao, Alexander Demblon, Haiming Wen, Enrique Lavernia

Materials Science and Engineering Faculty Research & Creative Works

Oxide dispersion-strengthened (ODS) alloys are a critical class of structural materials for extreme environments, owing to their unique combination of high-temperature strength, thermal stability, and radiation tolerance, enabled by a very high density of nanoscale oxide dispersoids. These features make ODS alloys attractive for advanced nuclear systems, aerospace applications, and other harsh-service conditions where conventional alloys rapidly degrade. Despite decades of development, key challenges remain in understanding how nanoscale oxides interact with matrix microstructures, alloy chemistry, and irradiation-induced defects to control macroscopic performance. This review provides a focused, mechanism-based synthesis of the microstructural features that govern the properties of ODS …

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were …

Infimum Dimension Nash Embeddings For 2d Projective Shape Analysis, Robert L. Paige, Vic Patrangenaru

Mathematics and Statistics Faculty Research & Creative Works

Vector embeddings make complicated data extracted from networks, words and images, more amendable to data science applications. At the present time, the Veronese-Whitney (VW) matrix embedding of the real projective space is the state of the art for making inference about digital images from an uncalibrated camera, such as a cell phone or security camera. In this work we consider vector embeddings for the projective shape data and in particular determine the minimum dimension isometric (distance-preserving or Nash) vector embedding for a projective space. We determine such an embedding for the projective plane in closed-form. From this embedding we determine …

A Fully Discrete Semi-Implicit Numerical Scheme And Its Optimal Error Estimates For Cahn-Hilliard-Mhd Model With Variable Density, Dongmei Duan, Fuzheng Gao, Xiaoming He, Yanping Lin

Mathematics and Statistics Faculty Research & Creative Works

This paper proposes and analyzes a fully discrete semi-implicit unconditionally energy stable numerical scheme to solve the Cahn-Hilliard Magnetohydrodynamics (Cahn-Hilliard-MHD) model with variable density. The unconditional energy stability and optimal L² error estimates are established for the fully discrete scheme. Major challenges in error estimation arise from the variable density, the strong nonlinearities, and the multi-physics coupling of the model. Under the mathematical induction framework, the Ritz quasi-projection and the Stokes quasi-projection, proposed in [SIAM J. Numer. Anal., 61(3):1218-1245, 2023], are utilized to avoid the gradient terms of the projection errors. The H⁻¹ superconvergence error estimates of Ritz …

Recycling Waste Polyethylene Terephthalate For Asphalt Modification: A Comprehensive Review On Material Properties, Processing Techniques, And Engineering Applications, Ruizhe Huang, Feng Ma, Ke Shi, Zhen Fu, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Polyethylene terephthalate (PET) is a thermoplastic polyester widely used in beverage bottles and packaging materials, accounting for approximately 60% of global plastic production. Due to its non-biodegradable nature, the accumulation of waste PET has posed a serious environmental challenge worldwide. In recent years, the recycling of PET for use in road engineering has been considered an effective approach to promote resource circulation and reduce plastic pollution. This paper first reviews the main recycling methods of PET, including mechanical shredding and chemical depolymerization, and analyzes its molecular structure, thermal properties, and reprocessing adaptability. Two typical engineering application paths are then evaluated: …

Robust Broadband Characterization Of Flexible Absorbers, Sheet Material, And Liquids Using A Coaxial Structure, Joseph Christopher Stecher

Masters Theses

Modern high-frequency measurement systems require reliable calibration and sample positioning to ensure measurement fidelity. This thesis presents three studies addressing practical limitations in broadband material parameter extraction and instrumentation.

The first study introduces a modified Nicolson–Ross–Weir (NRW) technique for flexible, compression-sensitive materials from 100 MHz to 18 GHz. Rigid 3D-printed spacers ensure precise sample positioning, and a T-matrix–based de-embedding procedure removes spacer effects. Validation using microstrip measurements and full-wave simulation confirms accurate permittivity extraction across compression levels.

The second study extends NRW to sheet materials enabling accurate material characterization. Independent validation using toroidal inductors with leakage correction and parallel-plate capacitors …

Analyzing Sleep Architecture And Brain State Transitions Via Hidden Markov Models On Fmri Data, Brileigh Jay Cates

Masters Theses

Sleep is associated with systematic changes in brain activity and functional connectivity observable in functional magnetic resonance imagining (fMRI) signals. Because subjects often fall asleep during resting-state experiments, the absence of vigilance monitoring can confound the interpretation of resting-state dynamics. Although electroencephalography (EEG) is the gold standard for sleep staging, simultaneous EEG-fMRI acquisition is not always feasible.

This study investigates whether sleep stages can be inferred directly from fMRI using a probabilistic latent-state framework. Hidden Markov Models (HMMs) are applied to blood-oxygen-level-dependent (BOLD) time series to identify latent brain states and their temporal transitions. Inferred states are aligned with EEG-derived …

Developing Discharge Estimation Algorithm Using Low-Cost Velocity Sensor And Machine Learning, Barkha Gautam

Masters Theses

Accurate river discharge estimation is essential for flood forecasting, water resources management, and hydraulic decision-making; however, continuous discharge records are unavailable at many river locations. Traditional stage-discharge rating curves are widely used but their reliability may decrease when channel conditions change or flow conditions vary rapidly. This study develops and evaluates Long Short-Term Memory (LSTM) models for discharge prediction using 15-minute time-series data from river monitoring stations in Missouri. Two model configurations, a baseline stage-only model and an enhanced stage-plus-velocity model, are developed and evaluated independently at two river sites to determine whether the inclusion of surface velocity improves discharge …

Wattage- And Composition-Dependent Ocular Surface Toxicity: An In Vitro Study On E-Cigarette Aerosol Exposure In Human Corneal Epithelial Cells, Tzu-Ling Lin

Masters Theses

As electronic cigarette consumption continues to escalate globally, its impact on non-respiratory mucosal surfaces, particularly the ocular surface, remains largely understudied. This study investigated the toxicological effects of e-cigarette aerosols using a human corneal epithelial cell (HCE-2) model. Our findings reveal that aerosol exposure induces a significant, dose-dependent reduction in cell viability, exacerbated by higher device wattage and specific flavor agents such as watermelon. Exposure was found to trigger intracellular oxidative stress and the activation of apoptotic pathways, leading to programmed cell death. Furthermore, the upregulation of proinflammatory cytokines suggests that vaping may predispose users to chronic inflammatory conditions of …

Age-Related Hearing Loss Involves Mitochondrial Dna Instability And Copy Number Depletion In The Cochlea: Insights From In Vivo And In Vitro Models, Akil Turner, Bo Ding, Xiaoxia Zhu, Tam Nguyen, Parveen Bazard, Robert D. Frisina

Chemical and Biochemical Engineering Faculty Research & Creative Works

Age-related hearing loss (ARHL) is a highly prevalent sensory neurodegenerative disorder that involves various molecular mechanisms. The present study investigated if age-related oxidative stress (OS) induces alterations in mitochondrial DNA (mtDNA) copy number and heteroplasmy, using complementary in vivo and in vitro models. Aged (30-month) CBA/CaJ mice have elevated auditory brainstem response (ABR) thresholds amplitudes vs. young (3-month) CBA/CaJ mice, a key physiological characteristic of ARHL The in vitro experiments employed the strial SV-K1 cochlear cell line treated with hydrogen peroxide (H₂O₂). Both the aged cochleae and H₂O₂-treated cells exhibited a significant …

Orchestrating Bone Healing: Biomaterial-Driven Immunoengineering Of The Bone Microenvironment For Advanced Regenerative Therapies, Ah Joung Rachel Yu, Mohammad Reza Zare, Edikan Ogunnaike, Mostafa Yazdi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone regeneration is a multistage and tightly regulated process driven by coordinated interactions between the immune and skeletal systems. While inflammation is essential for initiating repair, its dysregulation contributes to delayed union, nonunion, and impaired healing commonly seen in trauma, chronic disease, and aging. Traditional interventions, including autografts and inert biomaterials, provide structural support but fail to engage or modulate the immune microenvironment that governs successful regeneration. Emerging research in osteoimmunology has revealed the centrality of immune cell populations such as macrophages, T regulatory cells, dendritic cells, and myeloid-derived suppressor cells in directing osteogenesis, angiogenesis, and the resolution of inflammation. …

Manufacturing And Performance Evaluation Of Carbon/Epoxy Laminated Composites Cured Using Single- And Six-Magnetron Microwave Applications, Nayan Pundhir

Doctoral Dissertations

Microwave curing is fast, energy-efficient, and a viable alternative to conventional thermal curing processes. It has been widely adopted for processing carbon fiber-reinforced polymer (CFRP) composites because the high electrical conductivity of carbon fibers enables strong microwave coupling, leading to rapid volumetric heating and reduced energy consumption. The aim of this study is to investigate the use of microwave curing for manufacturing CFRP composites. IM7/Cycom 5320-1 unidirectional prepreg was utilized to fabricate laminated composites in two thickness ranges: 16-layer laminates (2.5 mm thickness) and 64-layer laminates (9.2 mm thickness). Two lay-up configurations were examined: symmetric cross-ply and quasi-isotropic. Different curing …

Temperature-Dependent Dielectric Function Of Solids From Coupled Oscillators With Radiation Reaction: Application To Atom–Surface Interactions, Tuhin Kanti Das

Doctoral Dissertations

In this dissertation, we propose a uniform functional form of the dielectric function of solids that is applicable over a wide range of frequencies. We apply our model to describe the dielectric function of two technologically important materials: silicon and calcium fluoride. The temperature dependence of their dielectric functions is also described using simple analytic forms. We found that a generalized Sellmeier-type model with complex denominators (“damped oscillators”) does not lead to a satisfactory fit of experimental data for the dielectric function. In contrast, our model, which is analytically only slightly more involved (“complex oscillator strengths”, complex numerators), allows us …

Strontium Titanate For Capacitor And Energy Storage Applications At Cryogenic Temperatures, Hung Trinh

Doctoral Dissertations

This study investigates the dielectric properties of single crystal and ceramic strontium titanate (SrTiO₃) for cryogenic capacitor applications from room temperature to 4 K. Permittivity (k) and loss tangent are dependent on temperature, frequency, mechanical stress, and applied DC electric field. Accordingly, the dielectric constant and loss tangent were measured at various frequencies and DC bias levels. Loss tangent data are also presented as equivalent series resistance (ESR). For single crystal SrTiO₃, an impurity level of ≈500 ppm barium resulted in an increase of the maximum permittivity to approximately 50,000 at 6 K. This relatively high …

Architecting A Complex Adaptive System Model For Selecting Policies To Reduce Kidney Discard, Lirim Ashiku

Doctoral Dissertations

"The kidney allocation system is a complex, evolving system involving multiple heterogeneous agents. Each agent exhibits emergent behavior that may not fully align with the complex system goals. Therefore, there is a need for a transdisciplinary systems approach to visualize the interdependency among agents and understand the dominant patterns that shape the kidney allocation system.

First, this research presented an incremental hierarchical system engineering approach in identifying the agents’ needs and behaviors toward the complex systems’ goal of maximizing deceased donor kidney utilization and reducing kidney discard. The hierarchical systems approach linked with model-based system engineering aided in eliciting agents’ …

Integrating Stakeholder Priorities Into Resilience Planning And Investment Decision-Making, Victoria Jeaneen Kraemer

Doctoral Dissertations

"Resilience is a system’s ability to bounce back from a disruption. However, resilience needs may vary across different stakeholders. To better integrate stakeholder input into resilience planning and investment decision-making, existing frameworks were combined to develop the Integrated Stakeholder-Centered Resilience Framework. This broad framework is tailorable across contexts and stakeholder types. Research results demonstrate the use of this framework to evaluate the effects of disruptions and represent stakeholder preferences for investments. In the first study, participants were randomly assigned to power outage scenarios, which did not affect their criteria priorities. An exploratory factor analysis revealed two main priorities, (1) Absorption …

N-Radii Approach For Multi-Scale Characterization Of Graphite Shape In Cast Iron, Simon N. Lekakh, Laura Bartlett

Materials Science and Engineering Faculty Research & Creative Works

Knowledge of multi-scale particle macro-shape and micro-surface topology is critical in many technical disciplines. Specifically, quality assessment of the shape of the graphite phase in cast irons is essential for day-to-day metal casting operations. Common methods for evaluating particle macro-shape have several drawbacks, often resulting in underestimation of sharp corners and surface texture. In this article, a method based on plotting n-radii from the center of mass to the perimeter and computing multi-scale topological characteristics is described and tested. Parametric tests, involving variations in the number of n-radii and image resolution, were performed to optimize the test parameters. The method …

Modeling Of Transformation Temperatures In Cast Martensitic Stainless Steels-Ca6nm: Effects Of Composition, Heating Rate, And Grain Size, Ugochukwu Agbedo, Mario Buchely, Laura Bartlett, Caelan Kennedy

Materials Science and Engineering Faculty Research & Creative Works

Accurate prediction of the critical transformation temperatures Ac1 and Ac3 is one of the essential factors in the heat treatment of CA6NM cast martensitic stainless steel. In this study, the influence of alloy composition, heating rate, and prior austenite grain size on the critical temperatures was quantified using dilatometric measurements and statistical modeling. Six heat treatment conditions produced prior austenite grain sizes ranging from ~75 to 247 µm. Experimental results showed that grain size variations produced only minor changes in Ac1 and Ac3, indicating a weak dependence of transformation temperatures on prior austenite grain size within the investigated range. In …