Digital Commons Network^™

Temperature Fluctuations Within A Solid Of Finite Thickness, William Sanford Hogan

Masters Theses

"The object of this thesis is to determine by analytical methods the temperatures within a homogeneous plate of finite thickness subjected to a constant temperature on one side and a periodically fluctuating temperature on the opposite side. The heat flow in the other two directions is considered negligible in this problem. Periodic changes of temperature are frequent in nature and in engineering. The surface of the earth is heated periodically by the sun in its daily and annual cycle and the periodic temperature changes below the surface and the question to which depth these changes are appreciable were dealt with …

Separation Of Copper And Zinc On Synthetic Resins, Ernest Joseph Breton

Masters Theses

"It was desired to know whether ion exchange resins could be of value to the metallurgist in the recovery and separation of metals. The recovery and separation of copper and zinc from dilute solutions on Amberlite IRC-50, a carboxylic resin, and Amberlite IR-120, a nuclear sulfonic resin, were investigated. It was found that Amberlite IRC-50 could effectively remove copper ions from a solution of copper and zinc. Amberlite IR-120, due to the strong sulfonic acid groups, exhibited only a slight preference for copper as compared to zinc. It would seem that a judicious choice of resins coupled with appropriate chemistry …

A Grazing Incidence Vacuum Grating Spectrograph For Far Ultra Violet Spectroscopy, Lawrey Huber Chapin

Masters Theses

"Spectroscopy, in the region of the far ultraviolet from 100 Angstroms to 1000 Angstroms, requires special equipment and techniques, inasmuch as these wavelengths are highly absorbed by air. Many gases have resonant frequencies corresponding to the wavelengths mentioned and hence absorption bands appear in the spectrograms obtained by using spectrographs for the visible region. One solution of the problem of obtaining data in this region is to construct a spectrograph from which all intervening gas molecules have been removed, thus eliminating the absorbing material. A vacuum of 10⁻⁴ mm. of mercury is necessary to reduce the absorption to a value …

Torque-Stress Relations In Bolts With National Fine Threads, Eugene Casper Chase

Masters Theses

"Stresses, in bolts, caused by initial tightening have long been a problem to machine designers. To take care of these unknown stresses, produced by initial tightening, designers have used empirical formulas. These formulas originally used for National Coarse Threads, have been carried over into the field of National Fine Threaded bolts. No known tests have been conducted to determine whether or not these formulas hold in the initial tightening of Fine Threaded bolts. Initial tightening stresses may be caused by one of two ways. First, consider two flat ground plates to be held together by bolts to form a steam …

Rockbursts, Christian Maurice Colson

Masters Theses

"This paper does not pretend to originality; it is an attempt to bring to light the causes and the mechanism of rockbursts, as exposed in the literature. Furthermore, an endeavor has been made to give a comprehensive picture of the prediction, prevention, and control methods of rockbursts. Briefly, what has been done in the field of rockbursts, and what remains open to investigation is submitted to the reader. The choice of rockbursts as a thesis subject appears to be justified by the geologic interest of the question. Detailed geologic observations, and particularly the recording of all the structural features which …

Effects Of Wave Action Upon The Design Of The Breakwater For Istanbul Harbor, Melih Suat Durusan

Masters Theses

"The city of Istanbul is situated on the southern entrance of the Bosphorus which separates Asia from Europe; at the same time it is the only strait that leads to the Black Sea. Istanbul is the city that connects Europe-Asia highways and railways. These features show that Istanbul is a very important port. The Golden Horn and the southern end of the Bosphorus constitute a natural harbor which has been in use for many years. Although the natural harbor has served its purpose in the past, the present conditions necessitate the presence of a new harbor...One economical method of improving …

Separation Of Cobalt From Zinc Sulfate Solutions By Synthetic Cation Exchange Resins, Wen-Hsiang Chang

Masters Theses

"The purpose of the present research is primarily to investigate the possibility of the separation and recovery of cobalt from zinc sulfate solutions by means of cation exchange resins. It is thought that such an investigation, seemingly of academic interest, might throw some light on determining the possibility of processing some industrial solutions containing both cobalt and zinc. Cobalt, for instance, has been well known as one of the most detrimental impurities in zinc electrolytic solutions. In spite of various purification treatments, small amounts of cobalt are often present in the electrolytic solution, causing a reduction in current efficiency and …

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

Economical Span Length Ratios For Three-Span Continuous Girder Bridges, Donald Hindrik Timmer

Masters Theses

"The three-span continuous bridge is one of the most popular bridges used by highway departments at the present time. The low first cost and overall economy combined with the pleasing appearance of this type of bridge as compared to simple span structures has led most highway departments to use continuous spans whenever conditions permit. The design of three-span continuous bridges, as well as the design of any of the other bridge types, is usually carried out as an analysis rather than a design. In the case of the three-span continuous girder, with rolled steel beams, an initial assumption as to …

The Theory Of The Specific Heat Of A Face-Centered Cubic Lattice, Charles Robert Bonnell

Masters Theses

"It is generally accepted that a normal crystalline solid can be pictured at absolute zero as an assembly of atoms at rest arranged at periodic lattice points. Since at higher temperatures each molecule becomes a harmonic oscillator about its lattice point, it is necessary to know the distribution of normal modes of vibration in order to calculate the thermodynamic properties of the lattice...Many approaches have been made to get a simple solution of the problem, but either accuracy is sacrificed for simplicity, or the solutions demand a very considerable amount of labor. The classical theories failed to explain the change …

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

Effects Of A Reverse Order Of Firing Using Millisecond Delay Electric Blasting Caps In A Quarry Operation, Reginald John Jones

Masters Theses

"Evidence of the steady increase in the production of quarries is a reflection of the improved blasting practices that are being used. New explosives, the new millisecond electrical blasting caps and the endless experimentation carried on by both manufacturer and operator continue to aid or better the old methods of quarry blasting. In many instances the better results were obtained from practices hitherto unknown or at least unused. This report describes the results obtained from comparing quarry rounds shot in the accepted firing order and those shot in the reverse order of firing. The purpose of the report is to …

Construction And Operation Of A Vacuum Retort Pilot-Plant For Distillation Of Alloys, Robert Frederick Doelling

Masters Theses

"The widespread appearance of large scale vacuum systems operating commercially in the micron range of pressures has initiated a new field of industrial endeavor, vacuum engineering. The ever increasing number of applications of vacuo in commercial processes and laboratory research has stimulated the design and improvement of vacuum equipment, and at the present time equipment may be obtained to meet practically any need. In turn, the variety of available tools has directed the engineers attention to improving old processes and developing new ones through the utilization of vacuum techniques ... The possibility of producing a relatively high purity silver in …

Grouting And Freezing Unconsolidated And Water-Bearing Strata, Robert Walter Heins

Masters Theses

"The process of grouting has undergone many changes in recent years. A definition must, therefore, be inclusive. "Grouting" is the process of injecting, under pressure, into soil and rock through boreholes or other openings, any solution or suspension containing materials that harden, stiffen, or swell in void spaces to produce a solid or semi-solid impermeable mass. Various cements, chemicals, asphalts and clays are the materials used in the grouting process. The use of tailings is also considered a type of grouting, since some hardening or stiffening takes place. Cement grout relies on chemical reaction to bring about setting or hardening …

Periodic Heat Flow In A Semi-Infinite Solid, Warren George Heidbrier

Masters Theses

"The object of this investigation is to determine by analytical means the temperature within a homogeneous semi-infinite solid, as a function of time, while the solid is receiving heat periodically by radiation on its one flat surface. Periodic heat flow means that heat flow is a continuous function of time and repeats itself at regular intervals. A semi-infinite solid has only one bounding plane and extends to infinity in all other directions...Much of this work deals with the soil temperatures of the earth both at the surface and at various depths. The surface of the earth is subjected to daily …

A Study Of Cast Eutectic Structures By Means Of Optical And X-Ray Microscopy, John Stanton Winston

Masters Theses

"The present research is the result of interest in two rather broad, and at first thought, seemingly entirely separate topics: the structure of eutectics and x-ray microscopy. D. Hanson in 1923 in his correspondence with Albert M. Portevin in regard to his article on the structure of eutectics states, "A point that always stuck him (D. Hanson) in examining eutectics was that one of the constituents always formed a continuous phase round the other one. The orientation of one constituent was either constant or varied in a uniform manner. What, however, was the condition of the 'enveloped' constituent, which formed …

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

Velocity Studies In A Vertical Pipe Flowing Full, Robert Franklin Tindall

Masters Theses

"The purpose of this investigation is to install a hard drawn copper pipe approximately 1/2 inch in diameter, and approximately 35 feet long in a vertical position. The copper pipe is to have pressure takeoff points at various distances along the length of the pipe. The purpose of these takeoffs is to measure the pressure of the water at the point of takeoff in the pipe. The water is to be forced into the pipe, assisted by gravity, thereby causing a pressure of some measurable quanity [sic] greater than absolute zero pressure. The discharge was to be by volumetric measurement, …

The Determination Of The Solubility Of Hafnium Oxide In Aqueous Solution By The Radioactive Tracer Technique, Hampden O. Banks

Masters Theses

"To date, there is no information in the open literature concerning the solubility of hafnium oxide in water other than the fact that it is very insoluble. This lack of experimental information is due, partly, to the fact that hafnium is a relatively new addition to the list of known elements"--Introduction, page 1.

Hydraulic Scale For Measurement Of Dynamometer And Other Forces, John Richard Barton

Masters Theses

"The object of this investigation is to design, build, test, and develop, a hydraulic type scale primarily to be used for measuring dynamometer forces. The scale however is not limited to use on dynamometers, but may be used for other types of force measurements such as the continuous weighing of material on a conveyor belt in conjunction with a recording pressure gage. The scale has numerous applications in determining forces where conventional scales are now used. This particular subject was chosen because of the need for a convenient, inexpensive, and accurate scale for use in measuring the force exerted by …

Ammonium And Alkylammonium Salts Of Carboxylic Acids As Characterizing Derivatives, Hal Gilbert Lankford

Masters Theses

"One of the methods widely used to establish the identity and purity of an organic compound is to prepare various derivatives, the properties of which have been reported in the literature. The object of this investigation was to prepare ammonium and alkylammonium salts of carboxylic acid and determine their utility as characterization derivatives. Should these salts meet the requirements of a satisfactory derivative, they would be particularly valuable from a standpoint time, since they are generally very quickly formed"--Introduction, page 1.

Effects Of Sand Admixtures On The Physical Properties Of Soils, Necati Kanatsiz

Masters Theses

"The purpose of this study is to determine the effects of sand admixtures on the physical properties of soils. Soil may be defined as a heterogenous [sic] collection of rock and mineral fragments whose decomposition and disintegration have been brought about by the action of physical, chemical, and biological forces, working singly or in combination...In the conviction that the study of soils, with respect to highway engineering, is becoming more and more important this study was undertaken in order to learn whether the addition of sand would lead to desirable results, and if not, at least secure some further addition …

A Survey To Determine The Most Economic Design For Concrete Runways Of A Class 4 Airport, Yani Triandafilidis

Masters Theses

"This study is for the purpose of determining the most economical design for the runways of the Yesilkoy airport in Istanbul, Turkey. The discussion will include different design methods for the runways and the longitudinal and transverse joints that will be used in each case to provide crack control in the runway surfacing.

The city of Istanbul has a population of about one million. It is a growing city, being the industrial center of Turkey, and it also serves as a terminal for transcontinental airway systems. For these reasons it was decided to construct a class 4 airport for the …

Measurement Of Flotation Rate As A Function Of Particle Size, Thomas Martin Morris

Doctoral Dissertations

“The Problem. The rate of flotation of solid particles determines the percentage recovery of these particles which can be obtained during a given time interval. An examination of operating data from a flotation plant shows that percentage recovery varies with the size of particle.

Many investigators have explored the problem of measuring flotation rate. In most cases the results obtained were expressed qualitatively. The results obtained by one worker were often at variance with results reported by another worker.

This investigation was undertaken with the object of (1) quantitatively measuring the rate of flotation of various sizes of particles and …

The Volatility Of Metallic Sulfides And Their Treatment By Vacuum Metallurgy, Chi-Mei Hsiao

Doctoral Dissertations

"The purpose of this investigation is to determine the vapor pressure or volatility of the sulfides of the following metals by Langmuir's method: a) Zinc b) Cadmium c) Mercury d) Manganese e) Tin f) Lead g) Arsenic h) Antimony i) Molybdenum J) Iron k) Cobalt l) Nickel m) Copper n) Silver o) Calcium p) Aluminum.

The relation of this property to the position of the metals in the periodic table will be discussed, thus the vapor pressure or volatility of the remaining metals can be predicted as to the order of magnitude if the law of periodicity holds.

The possible …

Effects Of Higher Speed Explosives In Drift Rounds, Harve Preston Nelson

Masters Theses

"There is much still to be learned of what takes place in the actual explosive zone of a rock blast. Many factors, both known and unknown, have individual and collective effects. A program is now in progress by the Mining Department of Missouri School of Mines and Metallurgy for developing and preserving information about some of the factors affecting the use of explosives. Some work has been done. More is now being completed by Messrs. R. J. Jones and J. B. H. Fitz-William. Present plans call for continuing the research and gathering data on this subject which is so important …

The Energy Levels Of Potassium Chloride, Clifford L. Adams

Masters Theses

"An understanding of the electronic energy states of solids has long been considered of importance. And the energy levels of the alkali halides have been the subject of much study in recent years. The present work is an attempt to set up an energy-level diagram for potassium chloride"--Introduction, page 1.

The Theory Of The Specific Heat Of A Body Centered Cubic Lattice, Curtis Cleveland Webster

Masters Theses

"In normal crystalline solids the atoms are at rest in their lattice points at absolute zero of temperature. Increasing the temperature of the crystal increases the motion of the atoms about their lattice points. Approximately, each atom or ion may be treated as a harmonic oscillator. then from the equations of motion of the atoms, by the Born-von Karman theory of specific heats, the normal modes of vibration of the lattice can be expressed as the roots of a secular determinant. Application of this theory to determine the thermodynamic properties of crystals has resulted either in solutions that are inaccurate …

A Determination Of The Economic Feasibility Of Producing Marginal Gas Wells, Horace Tharp Mann

Masters Theses

"The purpose of this investigation is to show that it is economically feasible to produce marginal gas wells in such a manner that all the gas from the edge of the field will be captured by the first row of wells. In this problem the permeability of the sand is to be variable but known, and the effects of this variable permeability on the pressure distribution, and resulting gas production, will be discussed.

In many gas fields the point at which it is generally considered unprofitable to drill new wells is well inside the boundary of the reservoir. This is …

The Study Of Effect Of Definite Grain Sized Sand On The Shearing Strength Of Clays, Faruk Omer Akkoseoglu

Masters Theses

"Slopes of all kinds, including mountains, hills, sea coast bluffs, river banks, and man made cuts and fills, stay in place only because of the shearing strength possessed by the soil or rock of which they are composed. The resistance of soils to shearing strength is probably the most important of all the soil properties to foundation engineers. Most of the serious structural failures which are due to unexpected soil behaviour are caused by deficiency in the shearing strength of the soil. Water, on the other hand, possesses no static strength in shear, therefore bodies of water have no surface …