Digital Commons Network^™

Miniaturized Wearable Biosensors For Continuous Health Monitoring Fabricated Using The Femtosecond Laser-Induced Graphene Surface And Encapsulated Traces And Electrodes, Homayoon Soleimani Dinani, Tatianna Reinbolt, Bohong Zhang, Ganggang Zhao, Rex E. Gerald, Zheng Yan, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Wearable sensors are increasingly being used as biosensors for health monitoring. Current wearable devices are large, heavy, invasive, skin irritants, or not continuous. Miniaturization was chosen to address these issues, using a femtosecond laser-conversion technique to fabricate miniaturized laser-induced graphene (LIG) sensor arrays on and encapsulated within a polyimide substrate. The femtosecond laser-converted conductive traces can have a size of 20 to 2 μm compared to the traditionally larger CO2 laser dimensions of around 300 to 100 μm. This marks a 93-98% decrease in trace size when using a femtosecond laser. This miniaturization allows for the ability to process temperature, …

Component Level Em Emission Assessment And Management For Rf Desensitization, Xiangrui Su, Wenchang Huang, Junghee Cho, Joonki Paek, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

Radio frequency (RF) desensitization is a common issue caused by high-speed components in modern electronic devices. Consequently, numerous studies have focused on characterizing and quantifying electromagnetic (EM) emission sources by using near field scanning to detect EM noise sources. However, before near field scanning, no predetermined threshold is available to quickly assess whether an EM noise source will pose RF desensitization risks in the receiving antenna. This article presents a method to optimize near field scanning settings through EM emission management analysis. Drawing on experience from numerous EM emission studies, we introduce an EM emission management procedure for two common …

Environmental Pollutants: A Risk For Premature Aging And Transgenerational Toxicity, Alex Kathleen Daniels

Masters Theses

"This thesis aims to identify interactions between C. elegans’ reproductive system and global pollutants such as microplastics, HgCl₂, nicotine, and pesticides. Human exposure to these pollutants and their effect on reproduction can be analyzed using the C. elegans as a model organism. Systematic analysis of matricidal hatching, progeny production, germline apoptosis, and lifespan assays determined effects on reproduction and reproductive aging. Through my experiments, it was determined that no significant effects were produced from the selected polystyrene, polyethylene, vape juice, nicotine hemi sulfate salt, imidacloprid, or glyphosate regarding matricidal hatching or progeny production. I confirmed that HgCl₂ induced significant effects …

Evaluation Of The Impact Of Secondhand E-Cigarette Aerosols On Ros-Mediated Alterations Of Epigenetic Events: Implications For Copd Pathogenesis And Assessment Of The Efficacy Of Cold Atmospheric Plasma In Degrading Organophosphate Pesticides On Kevlar Materials, Ta-Chun Lin

Masters Theses

"We explored 1) the toxicological impacts of e-cigarette aerosols and 2) the decontamination efficacy of Cold Atmospheric Plasma (CAP) technology over organophosphates. In examining the effects of firsthand and secondhand e-cigarette aerosol exposure on A549 and BEAS-2B lung cells, we observed significant cytotoxicity, increased ROS levels, and epigenetic modifications, including heightened DNA methylation and downregulation of histone deacetylases (HDACs). These molecular alterations may contribute to chronic respiratory conditions, such as COPD, underscoring the health risks of e-cigarette exposure.

We investigated CAP’s effectiveness in degrading organophosphate pesticide (OP) residues on fabric surfaces, revealing that CAP treatment effectively decomposes OPs such as …

Transfection Of Ionizable Lipid Nanoparticles On Raw 264.7 And Mda-Mb-231, Lavanya Bhargava

Masters Theses

"This thesis investigates the preparation, characterization, and transfection efficiency of various ionizable lipid nanoparticles (LNPs) formulated for the delivery of mRNA encoding enhanced green fluorescent protein (EGFP) in RAW 264.7 macrophages and MDA-MB-231 breast cancer cell lines. The ionizable cationic lipid studied are ALC-035, C12-200, C14-4, PPZ-A10, DLin-MC3-DMA. The study addresses the need for effective gene delivery systems to provide a safe and versatile platform that protects and transports nucleic acids into target cells. LNPs were synthesized using microfluidic mixing methods, incorporating lipid components such as the cationic lipids, DSPE, DOPE, cholesterol and PEG lipids to achieve controlled particle sizes, …

Lidar From The Skies: A Uav-Based Approach For Efficient Object Detection And Tracking, Baya Cherif

Masters Theses

"Recently, there has been a growing interest in deploying the Light Detection and Ranging (LiDAR) technology to gain traction in the autonomous vehicle industry, its applications are expanding into areas like smart cities, agriculture, and renewable energy. This work proposes an advanced approach to enhance aerial traffic monitoring using Li- DAR. We aim to provide accurate, real-time object detection and tracking from an aerial perspective by integrating Unmanned Aerial Vehicle (UAV) with LiDAR, culminating in a smart UAV-integrated LiDAR (A-LiD) sensor for traffic surveillance. We introduce an adapted version of one of the newest methods of the cutting-edge 3D object …

Automated Generation Of Malware Metadata Signatures, Joel Schott

Masters Theses

In advanced, targeted malware attacks, the custom software tools used to package and send malicious files and messages can lead to distinctive metadata values that facilitate creation of a malware metadata signature. Manual creation of these signatures requires expert domain knowledge and is time-consuming and error-prone. Our goal is to automate this process. We created several methods of automatically generating malware metadata signatures for ZIP files and emails. We evaluated these methods by comparing signatures generated with these methods to existing expert-created signatures. We found automated methods for ZIP files and emails that are capable of generating metadata signatures that …

Fetal Acidosis Prediction Using Attention Enhanced Convolutional Neural Networks, Anusha Adhikari

Masters Theses

This study explores the integration of spectral mixtures of fetal heart rate (FHR) and uterine contraction (UC) signals to enhance the prediction of fetal acidosis, utilizing the CTU-CHB dataset. Several classification models were trained using two distinct oversampling techniques and inputs, demonstrating that models incorporating spectral mixtures significantly outperform those using raw signals. These models, particularly when combined with convolutional neural networks (CNNs) and attention mechanisms, achieved a notable F1-score of 0.98, with the highest model achieving an area under the Receiver Operating Characteristic (ROC) curve of 0.95. The research employs a variety of techniques including short-time Fourier transform and …

Long Short-Term Memory (Lstm) -Based Neural Network Model For Optimizing Composite Manufacturing Process Using Autoclave, Sourav P. Bolar

Masters Theses

The combination of high pressure and controlled heat plays a critical role in ensuring the uniform curing of composite materials, leading to parts with superior mechanical properties. In this study, three composite samples of IM7/CYCOM 5320-1, each cut into 12x12-inch squares, were placed in an autoclave at three different locations, spaced 6 inches apart. Sixteen thermocouples were randomly distributed across the setup to monitor the curing process as the autoclave temperature was systematically ramped up and down while maintaining constant pressure, creating a fully controlled curing environment. The primary objective was to optimize the curing locations to reduce machine runtime …

Modeling Of Slot-Backed Microstrip Line For Emi Applications, Jongsuk Hyun

Masters Theses

Radiated emissions from printed circuit boards (PCBs) are a significant concern in electromagnetic interference (EMI) and radio frequency interference (RFI). Shielding cans are widely used to mitigate these emissions but evaluating requires accurate characterization of equivalent noise sources. Slot-backed microstrip antennas are employed for this purpose due to their near-zero height, low parasitic radiation, and PCB-compatible structure, offering a practical alternative to conventional loop antennas. This paper presents a physics-based analytical model that integrates both the discontinuity effects and radiated characteristics of slot-backed microstrip structures within a unified circuit framework. An analytical expression for the dipole moment is proposed based …

Influence Of Alloy Composition On The Process Robustness Of Steels Consolidated Via Laser-Directed Energy Deposition, Jonathan Kelley

Masters Theses

"To ensure consistent quality of additively manufactured parts, it is advantageous to identify alloys which can meet performance criteria while being robust to process variations. Toward this end, this work investigated the effect of alloy composition on the robustness of steels consolidated via laser-directed energy deposition (L-DED). Ultra-high-strength low-alloy steel (UHSLA) and pure iron powders were mixed in-situ to produce 10 compositions containing 10-100% UHSLA by mass. JMatPro material simulations roughly predicted phases and mechanical properties. Two sets of experiments were used to evaluate the sensitivity of as-built hardness (all 10 compositions) and tensile properties (5 select compositions) to process …

Investigation Of Arm Stiffness Modulation During Overground Physical Human-Human Interaction, Henry Tien

Masters Theses

The vision of advancing robots capable of direct physical engagement with humans begins with an understanding of how humans interact with each other. Even rudimentary interactive tasks, such as shaking hands, provides tremendous challenges for modern robotics and current research into the biomechanics of such interactions is limited. Thus, further analysis of physical Human-Human Interaction (pHHI) will bolster efforts to enhance collaborative robot capabilities. To this end, a custom Force Perturbation Handle (FPH) was developed, including the requisite mechanical, electrical, and software systems, to investigate the unique role of arm stiffness modulation in haptic communication between humans. The novel device …

Gfrp Reinforced Bridge Barriers: Experiment Testing, Manish Kumar Gadhe

Masters Theses

This study focused on evaluating the performance of concrete bridge barriers reinforced with Glass Fiber Reinforced Polymer (GFRP) compared to those reinforced with conventional mild steel. Four full-scale barriers were constructed, three using GFRP bars as the reinforcement and one with mild steel reinforcement. These were cast on two concrete slabs to ensure consistent support conditions. The use of GFRP aims to address durability concerns associated with steel reinforced concrete (RC), particularly corrosion of these bars in harsh environments.

To simulate real-world impact scenarios, a weighted cart was launched at each barrier using a guided sled system. Sensors, including load …

Development Of A Method To Measure Blast Overpressure Exposure Using Orthogonal Sensor Orientations, Nicholas Kuehl

Masters Theses

Measuring and recording blast exposure to military personnel from shoulder-fired weaponry or improvised explosive devices to correlate health outcomes like mild traumatic brain injury has been a goal for many years. As such, many wearable sensors have been developed and tested for accuracy and reliability. Despite this, knowing the sensor orientation in relation to the blast source is important to fully correlate the actual personnel exposure to clinical outcomes. This research investigates whether pressures recorded at three independent orientations in the x, y and z planes can be combined to a representative pressure that is independent of orientation. Important metrics …

Critical Behavior Ofthedilutedquasi-Onedimensionalquantum Ising Model, Logan Bradley Sowadski

Masters Theses

We explore the phase transition in the diluted quasi-one-dimensional quantum Ising model. We begin by giving an introduction to the Ising model followed by derivations of the properties and observables. A brief overview of Monte-Carlo simulations is also given focusing on two algorithms that make simulations for physically realizable systems possible, the Metropolis and Wolff algorithms. We finally discuss the concept of random disorder in the system and the effects this can have on the bulk of the system.

These concepts are then directly applied to a quasi-one-dimensional Ising model. Motivated by recent experiments on the spin-chain material cobalt niobate, …

Constraint Programming For Optimized Degree Paths, Mitchell Lee Skaggs

Masters Theses

This work presents a degree planning tool developed as part of the Pervasive Cyberinfrastructure for Personalized eLearning and Instructional Support (PERCEPOLIS) project which generates complete, valid, and personalized degree paths at any point from admission to graduation. This eliminates tedious calculation and double-checking, allowing advisors to focus on a student’s long-term plans and students to proactively explore potential degree paths. The original research contribution of this work is the use of a unified model for academic requirements to automatically translate complex, real-world curricula into a constraint programming model that can be quickly optimized based on personalized student criteria.

Automatically translating …

Overpressure Waveform Comparison Of High Explosive, Methane, And Coal Dust Explosions, Frank James Schott

Masters Theses

Methane and coal dust explosions remain a leading cause of catastrophic mining accidents, making it critical to understand their overpressure characteristics for better hazard modeling, mitigation, and regulation. Although high explosives (HE), flammable gases, and dusts have been studied separately, direct waveform comparisons in identical environments are rare. This study addresses that gap by comparing overpressure waveforms from HE, methane-air mixtures, and coal dust explosions to assess differences in peak pressure, impulse, rise time, and phase duration. Twenty-seven tests were conducted using standardized instrumentation and sensor arrays. Results showed that HE generated the highest peak pressures with short positive phases …

Frequency-Tracker And Power Supply For Piezoelectric Lunar Dust Removal Actuator, Praneeth Uddarraju

Masters Theses

"This work presents a reconfigurable phase-locked loop (PLL)-based control system for the resonant excitation of piezoelectric actuators aimed at automated removal of particulate contaminants from photovoltaic (PV) surfaces—particularly in extraterrestrial environments such as the lunar surface. Regolith or lunar dust buildup on solar panels is a serious hazard to the effectiveness of energy harvesting on extended missions. By using high-frequency structural excitation and inertial forces the suggested system removes surface impurities. Tunable Sallen-Key low-pass filters for reliable feedback conditioning are used in conjunction with a digitally implemented PLL on an FPGA (XLR8 platform) to precisely lock the drive frequency to …

Selective Surface Activation And Flotation Of Pyrite For The Recovery Of Tellurium From Sulfide Tailings, Mulenga Mutema Chibesa

Masters Theses

Copper sulfide tailings from past and present mining operations are important secondary sources of critical elements such as tellurium (Te), a key component in cadmium–telluride photovoltaic solar cells. Characterization of tailing streams from copper porphyry (CP) ore flotation revealed that Te-bearing minerals are predominantly hosted in pyrite, which is usually depressed and discarded. Enhancing pyrite recovery is therefore a critical first step toward concentrating Te minerals for downstream extraction. However, pyrite flotation is often hindered by hydrophilic surface complexes formed during prior processing. This research investigated selective flotation of Te-bearing pyrite from CP tailings using micro flotation and bench-scale flotation, …

An Experimental Study Into The Methods Of Water Coupling And Their Impact On Kinetic Energy And Blast Over Pressure Through The Use Of A Ballistic Pendulum, Jeremiah Alan Cohn

Masters Theses

Water coupled charges utilize the material properties of water to alter their behavior for reductions in overpressure and increases in kinetic energy. Although water coupling has been studied directly, combined usage of the two primary methods of water coupling, tamping and pushing, hinders further research. This study addresses the gap in literature by comparing ballistic pendulum and blast data for charges with water tamping and pushing to determine differences in kinetic energy, peak overpressure, impulse, noise and duration of fireball. The results showed that water tamping provided a 69.1% increase in kinetic energy, an 18.6% reduction in incident overpressure, a …

Aerodynamic Design Workflow Optimization For Fsae: Advanced Cfd And Hpc Automation, Kyle Maynor

Masters Theses

This research identifies and resolves inefficiencies in the Computational Fluid Dynamics (CFD) workflow of the Missouri S&T Racing Formula SAE Team’s aerodynamic development. Key bottlenecks were found in simulation runtime, laborious simulation preparation, an overly manual simulation submission process, and unchecked mesh quality. A fully reimagined workflow was implemented with simulation parameters to adjust vehicle attitudes. From this, an automated design sweep could be executed to generate aero maps of the developing vehicle using the Design Manager Project. A Python-based submission app handles the terminal interfacing and macro editing that significantly slowed the job submission process before. Using a university …

Development Of Stalling Detection Algorithms And Operator Behavior Models For Evaluating Hydraulic Excavator Performance, Mateo Fernando Montenegro Defaz

Masters Theses

This study aims to develop a reliable algorithm for stalling detection and investigate how operator behaviors impact the truck-loading process, focusing on swing and bucket rotations. While the study of excavator digging conditions and equipment performance is well understood, describing stalling from telemetry data and the influence of operators’ behavior on overall system efficiency remain underexplored. This study seeks to: (i) develop a reliable algorithm for stall detection by analyzing key operational variables such as velocity and angles; (ii) implement statistical and machine learning techniques, specifically a Support Vector Machine (SVM) classification algorithm, to differentiate between ideal and non-ideal digging …

Enabling Drone-Integrated Active Microwave Thermography Via A Slot Antenna Design, Alec P. Fitzmaurice

Masters Theses

Civil infrastructure inspection quality and inspector safety may be enhanced from the advancement in the capabilities of nondestructive testing and evaluation of remote or otherwise hard-to-reach areas such as nuclear power plants, wind turbines, bridges, or other civil infrastructure using drone-based Active Microwave Thermography (AMT). AMT is a nondestructive testing technique that utilizes high frequency energy (often radiated from an antenna) to induce heating in a specimen. Following this thermal excitation, an infrared camera is used to measure the resulting surface thermal profile. From this, defect indications may be detected. To enable drone-based deployment of AMT, where the antenna size …

Dual-Bed Radioiodine Capture From Complex Gas Streams With Zeolites: Regeneration And Reuse Of Primary Sorbent Beds For Sustainable Waste Management, Krista Carlson, Brian J. Riley, Joshua Turner, David C. Cantu, Dev Chidambaram, Charmayne Lonergan, Jeffrey D. Rimer

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Degradation Of Radioactive Waste Encapsulation Of Bao−Feox−P2o5 Glass Evaluated From Electrical Conductivity, Kazuki Mitsui, Nobuyasu Nishioka, Hiromichi Takebe, Richard K. Brow, Akira Saitoh

Materials Science and Engineering Faculty Research & Creative Works

We report on the electrical conductivity of barium iron phosphate glass, a candidate for radioactive waste encapsulating glass. The glass composition has been optimized for slow dissolution in hot water because the precipitation of a stable hydration layer of FeO(OH) on the glass surface enhances the water durability of the glass. The mechanism of electrical conductivity of the glass is assumed to be an electron hopping between the electronic energy levels of Fe (II) and Fe (III) ions, obeying the electron carrier generation of Fe (II) → Fe (III) + e−. The electrical conductivity of the base glass was ∼3.2 …

Evaluation Of Processing Conditions For The Reduction Of Electrochemical Salt Waste Using Phosphate-Based Dechlorination, Harmony Werth, Jade Beland, Paige Murray, Dave Liang, Laurel Sharpless, Jonathan Evarts, Charmayne Lonergan, Brian J. Riley, Michael Simpson, Krista Carlson

Materials Science and Engineering Faculty Research & Creative Works

Electrochemical processing of used nuclear fuel in molten chloride salts generates complex radioactive salt waste. Dechlorination of waste salt using phosphate compounds at elevated temperatures (∼600 °C) reduces the volume of material for disposal while evolving gaseous chlorine compounds that could be used to transform metallic uranium into UCl3. In this study, the effects of processing temperature, environment (air or argon), and H3PO4 precursor-to-chlorine ratio on the dechlorination efficacy of a simple alkali salt mixture (SSM) and a salt waste simulant (ERV3) were evaluated. For both salts, the highest chlorine release was concurrent with the water boiling. For the SSM, …

Roadmap To 100 Gwdc: Scientific And Supply Chain Challenges For Cdte Photovoltaics, B. Edward Sartor, Samantha B. Reese, Lorelle M. Mansfield, Ryan Muzzio, Chun Sheng Jiang, Eric Colegrove, John S. Mangum, Camden L. Kasik, Daniel Z. Shaw, James R. Sites, Ramesh G. Dhere, Alex B. Goldstone, Michael S. Moats

Materials Science and Engineering Faculty Research & Creative Works

This roadmap highlights pathways to expand the CdTe module manufacturing capacity per year to 100 GWDC by 2030 by improving Te extraction from existing supply chains, minimizing Te usage in modules by leveraging thinner absorbers, and focusing research efforts in key areas to improve module efficiencies. Both scientific and supply chain innovations will be necessary to maintain the high compound annual growth rate of the CdTe photovoltaic (PV) industry and cement its role as a key technology for multi-TW-scale PV deployment.

Application Of Gurney And Flight Of Fragment Calculations For Water Jet Velocities In Explosive Applications, Rachel L. Bauer, Tate B. Friedrich, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

This study investigates the application of Gurney and flight of fragment equations, typically used to predict metal fragment velocities, in modeling the water jet behavior. Three shotgun cartridge sizes were used as the energy source: 2.59 g, 5.83 g, and 7.13 g. Two configurations were tested: standard (full-barrel water load) and "negative 8" (partial water load). High-speed footage captured water column velocities, and Gurney models, including infinitely tamped and open-faced configurations, combined with the flight of fragment model were used to assess prediction accuracy. Results showed charge strength significantly affects water column velocity, with higher strengths yielding greater stability and …

Amplitude Mode At The Superfluid-Insulator Transition On A Random Lattice, Pulloor Kuttanikkad Vishnu, Rajesh Narayanan, Thomas Vojta

Physics Faculty Research & Creative Works

We study the superfluid-insulator quantum phase transition of interacting bosons by means of large-scale Monte Carlo simulations in the presence of both topological and generic quenched disorders. Recent work has demonstrated that the amplitude mode at this transition broadens and localizes in the presence of dilution disorder, whereas it remains a well-defined delocalized excitation for topological (connectivity) disorder. Here, we analyze the crossover between systems with purely topological disorder and systems with additional bond randomness to disentangle the roles that disorder and interactions play for amplitude mode localization. Specifically, we analyze the scalar susceptibility and its spectral density on both …

The Kinetics Of Shj Degradation: Time And Stressor Dependent Chemical Analysis And Simulation, Nicholas Moser-Mancewicz, Jorge Ochoa, Michael Martinez-Szewczyk, Thomas Bantle, Dana Kern, Dirk Jordan, Steve Johnston, Julia E. Medvedeva, Mariana Bertoni

Physics Faculty Research & Creative Works

Despite record efficiencies, the wide adoption of silicon heterojunction is hampered by higher costs and uncertainties in long-term performance. Although recent publications report performance loss rates comparable to other field-deployed cSi technologies, the limited availability of field data and the dispersion in performance degradation results - particularly in open-circuit voltage - remain significant concerns. Various factors, including bulk and interfacial defects, charge carrier recombination dynamics, and environmental stressors such as temperature and humidity, contribute to this degradation. Understanding the mechanisms behind the open circuit voltage degradation as well as the kinetics involved is essential for developing mitigation strategies that enhance …