Digital Commons Network^™

Determination Of Vapor-Liquid Equilibrium Data By Continuous Distillation, David William Bunch

Masters Theses

"The procuring of experimental vapor-liquid equilibrium data has been a problem of considerable importance to chemical engineers for a number of years. Modern distillation theory and practice have made accurate vapor-liquid equilibrium data practically a necessity.

Using conventional methods for determining vapor-liquid equilibrium data, an experimenter can obtain only a single vapor-liquid equilibrium composition per trial. Ramalho working with Tiller has developed a new method which makes possible the determination of all values of the vapor and liquid concentrations in a single experiment.

The work done by Ramalho indicated that the necessity for very precise temperature measurements presented a serious …

The Dielectric Strength Of Some Anti-Corrosive Paints, John Harvey Gustafson

Masters Theses

"Metals undergo chemical reaction with nonmetallic elements of their surroundings to produce compounds which are either oxides or salts. These corrosion products, as they are called, may accelerate, impede, or have no influence on the course of further corrosion. It is unfortunate that iron, the metal of greatest use to man, receives very little protection from its corrosion products. There are no easy or inexpensive means of prevention of this corrosion and at best the reactions can only be controlled. One method of control is the use of anti-corrosive paints. Their protection is produced by placing an inert, continuous, and …

The Separation Of Selected Radioactive Fission Products By Electrodialysis, Jerry David Vie

Masters Theses

"The recent advent of nuclear energy has opened an era of almost unlimited power and countless problems. A problem of extreme importance is the recovery of unburned nuclear fuel and the claiming of transmutation products, such as Pu²³⁹ and U²³³, from the irradiated fuel elements. The chemical processing must also separate the fission products from the fissionable material if the fuel is to be used again.

At present, the irradiated fuel elements are stored for 90 to 120 days to allow the intense short half-life activity to decay. After "cooling down", the nuclear fuels are separated from …

A Method Of Fuel Testing In A Cfr Engine, George R. Baumgartner

Masters Theses

"At the present time, only a very small fraction of motor fuels produced for domestic use in the United States contain any alcohol in their blends. Soma foreign markets, notably the Philippine Islands and South American Countries use high proportions of alcohol in their motor fuel blends. Special purpose fuels in the United States which have alcohol blended with other compounds, have been used for engines from which maximum horsepower output is imperative. An example of this type of motor fuel blend might be found in the competitive motor sports involving motorcycles, stock automotive equipment, and special racing equipment.

An …

Coal Dust Explosions And Their Prevention, Surya Narayan Roychowdhury

Masters Theses

"The purpose of this study is to review the various causes of coal dust explosions and to summarize the preventive measures through which it may be possible to minimize the hazards of coal dust explosions. The properties of coal dust which have an important influence on its explosibility are: fineness, purity, percentage of volatile matter, dryness, age and degree of oxidation, lifting velocities and dispersability, and its static electrification.

Explosibility of coal dust has been studied in laboratories, in explosion galleries and in an experimental coal mine. The data and results obtained from the tests showed that finely pulverized coal …

Deflections Of Two-Way Slabs, Gerald C. Godzwon

Masters Theses

"A reinforced concrete member is by no means a truly elastic member, hence all ordinary deflection calculations relating to it, whichever method, are approximate. By the use of model study actual reinforced concrete slab models, of different end conditions, were built and tested for deflections under uniform loadings. Theoretical and actual deflection of reinforced concrete slabs are compared. The results of these tests indicate that the theoretical deflection equations may be 60 to 80 percent in error when applied to reinforced concrete slabs"--Abstract, page 2.

The Status Of Gas-Lubricated Bearings, Bhaskar Dattatraya Shiwalkar

Masters Theses

"The idea of gas-lubricated bearings was suggested as far back as 1854 by Hirn, but it is only very recently that they have aroused a great amount of interest. The interest is centered on the advantages of gas-bearings for the following major applications:

1. High temperature lubrication where ordinary liquid or grease lubrication fails.
2. Bearings operating in radio-active atmospheres where conventional lubrication may break down.
3. Applications sensitive to contamination where fouling from lubricating oil becomes serious.
4. Low-friction devices--an especially important advantage because of the trend to high speed machinery.
5. Applications where positional accuracies down to micro-inches are required.

As a result …

The Conducting Sheet Analogy For Laplace And Poisson Equations, Ronald Edward Volker

Masters Theses

"This investigation determined the accuracy to be expected with conducting sheet analogy solutions for Laplace and Poisson equations using simple and relatively inexpensive instrumentation. Several problems were solved experimentally and compared to known theoretical solutions to check variables in the technique and the accuracy of the experimental solution. It was found that if proper procedures are followed, solutions can be obtained rather rapidly and with an error of less than 5% which compares favorably with accuracy obtained by other investigators with more complex, precise equipment"--Abstract, page 2.

The Determination Of The Heat Transfer Film Coefficients Of Internally Heated And Twisted Strips, Karpurapu Venkata Apparao

Masters Theses

"As the demand for power supply is increasing, the power from nuclear fission is assuming an important role in the field of power production. The enormous quantity of heat generated during the fission process can be utilized for the generation of power. To get maximum advantage out of the fission process, the fission material must be fabricated into a unit of proper shape to permit the control of the process and safe removal of heat generated. This unit, composed of fuel elements is known as the reactor core and is one of the major concerns in nuclear power development.

The …

Analysis And Simulation Of A Cross-Correlation Communication System, Dennis Jay Gooding

Masters Theses

"Statement of the problem. The purpose of this study was (1) to calculate the probability of error as a function of receiver input signal-to-noise ratio for a typical communication system employing cross-correlation detection; (2) to design and construct an experimental model of such a communication system for the purposes of demonstrating the operation of the system and verifying the theoretical calculations"--Introduction, page 1.

Electrical Model Investigations Using The Horizontal Profiling Technique, Alan H. Kwentus

Masters Theses

"Electrical exploration methods have been used for many years as a means of determining subsurface structures and in the search for mineral deposits. Vertical profiling techniques can be used to determine rather accurately the resistivity and thichness of horizontal or gently dipping beds for cases up to four layers. Mathematical calculations have been made for multiple layers and theoretical curves have been computed and published for four and more layers. The vertical profiling method is not particularly well suited to the problem of locating lateral changes in resistivity produced by such features as ore bodies, sinks and channels. These features …

Imperfections In A Silicon Crystal Studied By The X-Ray And Density Method, Pierre Borgeaud

Masters Theses

"The study of imperfections in several crystals of silicon was conducted by the x-ray and density method"--Abstract, page 2.

Design Of An Intermediate Frequency Amplifier And Variable Frequency Oscillator, Robert Charles Mcintyre

Masters Theses

"Since the advent of the transistor in 1948 many technological barriers have been overcome in the field of semiconductors. Unfortunately, however, there is a considerable period of time between the discovery of a scientific phenomena and its widespread use and understanding by practicing engineers. The motivating factor which prompted this investigation was primarily the lack of knowledge which the author possessed concerning transistors. The selection of the amplifier and oscillator design confined the study primarily to the transistor. Considerable time, however, had to be spent in the study of basic transistor theory before any phase of the design could be …

Construction Of Distillation Solvent Recovery System, Joseph Richard Aid Iii

Masters Theses

"When a nuclear fuel is “burnt” in an atomic reactor it is not possible to completely utilize the fissionable material present due to build-up of fission products (which act as poisons), depletion of the fissionable material, and radiation damage to the fuel elements. Chemical processing of nuclear fuels is concerned with the recovery of the fissionable materials, specifically uranium, plutonium, and thorium, from the spent fuel elements. There are two general methods of reprocessing nuclear fuels: aqueous and non-aqueous. The aqueous methods include solvent extraction, ion exchange, and precipitation. Comprising the non-aqueous methods are fluoride volatility and pyrometallurgy. At the …

An Experimental Study Of The Effects Of Additives On The Collapsibility Of Carbon Dioxode-Sodium Silicate Bonded Foundry Cores, Robert G. Liptai

Masters Theses

"Every foundry is searching for methods and tools to raise product quality and production while lowering cost. In early 1954 published articles on the new carbon dioxide-sodium silicate process of core hardening began to stir the imagination of most of the foundries throughout the United States, This process has probably claimed more space in the foundry journals than any other subject, hailed by some as a cure-all and dismissed by others as unsatisfactory.

The list of advantages of this process was impressive, but anyone associated with the process was confronted with daily problems that had to be solved regardless of …

The Evaluation Of The Influence Of Large Aggregate On The Permeability Of Single-Grained Soils, Edward Clayton Grubbs

Masters Theses

"Each year many earth fill structures are designed and built with the primary purpose of impounding water. As these structures are only relatively impervious, engineers must consider the control of seepage in design. In order to predict seepage, the engineer must have knowledge of the potential flow or water through the earthen structure. He is, therefore, faced with the problem of determining a coefficient of permeability for use in design calculations.

The coefficient of permeability is easily enough determined for fine-grained materials. However, in construction it is very rare to find proper fill material which does not include quite a …

Properties Of Air-Entrained Concrete At Early Ages, Ugur Ozoguz

Masters Theses

"This study, entitled "Properties of Air-Entrained Concrete at Early Ages" concerns a group of tests designed to provide quantitative information regarding the effect of entrained air on the strength and durability of concrete before it reaches its 28 day strength.

Experiences in the field and laboratories have demonstrated that the addition of a moderate amount of air to any concrete mix will bring a marked increase in resistance to the disintegrating effects of freezing and thawing.

There have been extensive studies made on the subject of durability of air entrained concrete. Most of these studies were based on the effect …

The Separation And Microdetermination Of Cobalt In High Purity Nickel, John Richard Knapp Jr.

Masters Theses

"It has been found that many substances in an extremely pure form or containing certain trace impurities exhibit many unique physical and chemical properties. Investigators studying these properties have encountered many difficulties, especially in preparing the extremely pure substance and/or in accurately determining the quantity of impurities present. These problems arise chiefly from the very similar chemical properties of the constituents being separated and the possibility of contamination during the necessary processing of the substance for purification or analysis.

Trace analysis, therefore, has become very important in recent years. Where previously analyses based upon parts per hundred were adequate, now …

A Dissolution Rate Study In Hydrofluoric Acid Of Titanium And The Alpha Solid Solutions Of Oxygen In Titanium, John L. Ratliff

Masters Theses

"The dissolution mechanism of titanium in hydrofluoric acid was studied by collecting the hydrogen evolved during the dissolution reaction. A concentration range of 0.05 N to 0.50 N and a temperature range of 15°C to 45°C were employed for the determination. Values of the reaction order and energy of activation were determined for both pure titanium and the alpha solid solutions of oxygen in titanium and found to be the same within experimental limits. This indicated that the reaction giving rise to hydrogen evolution on the surfaces of both pure titanium and the TiO_x alloys was the same. The …

A Thermodynamic Study Of The Germanium Sulphides, Satya Prakash Jain

Masters Theses

"The experimental determination of some of the thermodynamic properties of germanium sulphide phases was conducted by a hydrogen reduction technique. The equilibrium H₂S/H₂ ratios were determined as a function of temperature for the two phase equilibria GeS₂-GeS and GeS-Ge. A Tutwiler analysis technique was used to analyze the equilibrated gas mixture for hydrogen sulphide content.

A detailed description is given for the process and the apparatus used in performing the experiments for equilibration of H₂S/H₂ gas mixture. The methods used for the preparation of germanium sulphide phases are also discussed.

The investigation …

A Thermodynamic Study Of Germanium Sulfides, Sham Lal Malhotra

Masters Theses

"The vapour pressure of germanium monosulfide (liquid) was determined by a boiling point method. An expression for the vapour pressure as a function of temperature was obtained and the heat of vapourization calculated. Using the heat of sublimation data obtained by other investigators, the heat of fusion was calculated.

The thermodynamic properties, change of standard free energy (Δ F°) heat content (Δ H°) and entropy (Δ S°); of germanium disulfide were determined by using an indirect method. The equilibrium H₂S/H₂O ratios are determined for the reaction:

GeS₂ (s) + 2H₂O(g) = GeO_{2 …}

The Lattice Constants Of Chromium And Vanadium Containing Dissolved Gases, Paluri Bhimeswara Rao

Masters Theses

"The physical properties of chromium and vanadium are so important that a study of their lattice constants and their coefficients of thermal expansion, requires special consideration.

A number of research workers, over a period of about forty years, have done considerable work in determining the above constants. Some of the previous investigators found an anomaly in the thermal expansion, electrical resistivity and other physical properties of chromium. They observed that at about 37°C, chromium showed a discontinuity in the above physical properties. However it is not known what causes the discontinuity in the expansivity curve of chromium. The discontinuity may …

Heat Transfer Coefficients In Artificially Roughened Pipes, Mehmet Hayati Turan

Masters Theses

"The purpose of this investigation is to determine experimentally the effects of three different types of artificial roughness on the convective heat transfer coefficient in a pipe and compare these values with that for a smooth pipe for turbulent flow"--Introduction, page 7.

A Study Of The Inlet Characteristics And Entrance Losses Of Pipe Culvert With A Flush Mounted, Sharp Edged Inlet, Luke Lea Callaway Jr.

Masters Theses

"Of all hydraulic structures, culverts are by far the most numerous. Lack of understanding of the functioning of culverts has resulted in many of them being implaced improperly and as a result, they function with less efficiency and at reduced capacity. Much has been written regarding the flow of water in open channels, culverts included, but little has been done regarding inlet conditions. It is necessary in the design of culverts, as with any other structure, that conditions which govern the operation of the structure be established. This paper is a study of the inlet conditions of a circular cross …

Some Physical, Chemical, And Thermohydrodynamic Parameters Of Explosive Ammonium Nitrate-Fuel Oil Mixtures, Joseph J. Yancik

Doctoral Dissertations

"The explosive properties of ammonium nitrate-fuel blasting agents were investigated by measuring their detonation velocity and sensitivity. Detonation velocity was measured by a pin oscillograph method with a modified pin technique. Five types of tests were used to evaluate the explosive sensitivity of AN-fuel mixtures under varied environmental conditions. These tests measured the confined and unconfined critical diameter, minimum primer for a three inch diameter iron pipe confined charge, for an unconfined charge at the critical diameter, and minimum primacord primer under special conditions.

Properties of ammonium nitrate-fuel blasting agents were evaluated by considering the effects which each component of …

Investigation Of Economic Design Procedure For A Rigid Frame, Richard S. Groner

Masters Theses

"This work presents an analysis of various arrangements of component parts of a rigid frame. From this analysis a procedure is indicated for a logical choice of member sizes for a first trial selection of a frame for given loading conditions. The first trial solution yields a frame which is in the range of an economical design"--Abstract, page 2.

The Missouri Miner, November 13, 1959

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 23, 1959

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 16, 1959

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, May 22, 1959

The Missouri Miner Newspaper

No abstract provided.