Digital Commons Network^™

Attenuation Properties Of Cement Composites: Experimental Measurements And Monte Carlo Calculations, Raul Florez

Masters Theses

"Developing new cement based materials with excellent mechanical and attenuation properties is critically important for both medical and nuclear power industries. Concrete continues to be the primary choice material for the shielding of gamma and neutron radiation in facilities such as nuclear reactors, nuclear waste repositories, spent nuclear fuel pools, heavy particle radiotherapy rooms, particles accelerators, among others. The purpose of this research was to manufacture cement pastes modified with magnetite and samarium oxide and evaluate the feasibility of utilizing them for shielding of gamma and neutron radiation. Two different experiments were conducted to accomplish these goals. In the first …

Thrust Sensing For Small Uavs, Christopher Scott Marchman

Masters Theses

"Unmanned aerial vehicles (UAVs) have become prevalent in both military and civilian applications. UAVs have many size categories from large-scale aircraft to micro air vehicles. The performance, health, and efficiency for UAVs of smaller sizes can be difficult to assess and few associated instrumentation systems have been developed. Thrust measurements on the ground can characterize systems especially when combined with simultaneous motor power measurements. This thesis demonstrates the use of strain measurements to measure the thrust produced by motor/propeller combinations for such small UAVs. A full-bridge Wheatstone circuit and electrical resistance strain gauges were used in conjunction with constant-stress cantilever …

Structural Analysis And Fluid Flow Modeling Of The Kapuni Field, New Zealand, Jarret Taylor Baldwin

Masters Theses

"The Taranaki Basin is the largest hydrocarbon producing basin in New Zealand. A total area of over 330,000 km

Deterministic Simulation Of Thermal Neutron Radiography And Tomography, Rajarshi Pal Chowdhury

Masters Theses

"In recent years, thermal neutron radiography and tomography have gained much attention as one of the nondestructive testing methods. However, the application of thermal neutron radiography and tomography hindered by their technical complexity, radiation shielding, and time-consuming data collection processes. Monte Carlo simulations have been developed in the past to improve the neutron imaging facility's ability. In this present work, a new deterministic simulation approach has been proposed and demonstrated to simulate neutron radiographs numerically using a ray tracing algorithm. This approach has made the simulation of neutron radiographs much faster than by previously used stochastic methods (i.e Monte Carlo …

Design Of A Microwave Imaging System For Rapid Wideband Imaging, Matthew Jared Horst

Masters Theses

An imaging system composed of two linear arrays of antennas is designed through full-wave simulation and fabricated for use in synthetic aperture radar imaging. The arrays electronically scan along their antenna elements and are mechanically moved along a second orthogonal direction for scanning large two-dimensional areas quickly. Each linear array is printed on a circuit board where the antenna elements are integrated into the edge of the board as tapered slot-line antennas operating at 22 to 27 GHz. A multiplexer circuit is printed onto each linear array to transmit wideband signals to each antenna in the array. Receivers are printed …

Influence Of Mix Design Parameters On Dynamic Segregation Of Self-Consolidating Concrete And Consequences On Performance Of Precast Beams, Aida Margarita Ley Hernandez

Masters Theses

"Self-Consolidating Concrete (SCC) is more vulnerable to stability problems as a consequence of its high flowing ability compared to conventional vibrated concrete. Dynamic segregation refers to the tendency of the concrete constituents to separate from the suspended matrix, usually in horizontal direction while being cast into the formwork or due to an impact. Similarly to static segregation, dynamic segregation can affect the homogeneity of SCC. Therefore, it is highly essential to ensure a proper dynamic stability in order to enhance the uniformity of in-situ properties of pre-stressed beams.

In this research project, the effects of SCC mix design parameters are …

De-Embedding Method For Electrical Response Extraction Of Through-Silicon Via (Tsv) In Silicon Interposer Technology And Signal Integrity Performance Comparison With Embedded Multi-Die Interconnect Bridge (Emib) Technology, Qian Wang

Masters Theses

"Traditional two-dimensional system-in-package (2D SiP) can no longer support the scaling of size, power, bandwidth, and cost at the same rate required by Moore's Law. Three-dimensional integrated circuits (3D-ICs), 2.5D silicon interposer technology in which through silicon vias are widely used, are implemented to meet these challenges. Embedded multi-die interconnect bridge (EMIB) technology are proposed as well.

In Section 1, a novel de-embedding method is proposed for TSV characterization by using a set of simple yet efficient test patterns. Full wave models and corresponding equivalent circuits are provided to explain the electrical performance of the test patterns clearly. Furthermore, broadband …

A Linear Matrix Inequality-Based Approach For The Computation Of Actuator Bandwidth Limits In Adaptive Control, Daniel Robert Wagner

Masters Theses

"Linear matrix inequalities and convex optimization techniques have become popular tools to solve nontrivial problems in the field of adaptive control. Specifically, the stability of adaptive control laws in the presence of actuator dynamics remains as an important open control problem. In this thesis, we present a linear matrix inequalities-based hedging approach and evaluate it for model reference adaptive control of an uncertain dynamical system in the presence of actuator dynamics. The ideal reference dynamics are modified such that the hedging approach allows the correct adaptation without being hindered by the presence of actuator dynamics. The hedging approach is first …

Mitigation Of Wellbore Instability In Deviated Wells By Using Geomechanical Models And Mpd Technique, Husam Raad Abbood

Masters Theses

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe presents a significant wellbore stability problem for deviated wells. In this study, two solutions are utilized to address this problem. The first approach is a 1-D Geomechanical model of the Mishrif formation compiled based on the state of stress and rock strength parameters. It is utilized to assess the contribution of borehole collapse leading to the stuck pipe problems. The results of this study show that wells characterized by stuck pipe are drilled along azimuths which promote wellbore collapse. Three different failure criteria, the …

Design And Analysis Of An Axisymmetric Aerospike Supersonic Micro-Nozzle For A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Abdalla Ali Bani

Masters Theses

"The cold-gas propulsion system being developed by M-SAT requires improvements to its original nozzle design. This study documents the research, design, and analysis of a supersonic plug nozzle concept that could be integrated to the refrigerant-based cold-gas propulsion system to possibly improve its performance. As documented in this thesis, CFD analysis showed that the outlined nozzle design method resulted in a feasible nozzle concept that has the ability to out-perform a conventional nozzle of the same area ratio. The flow-fields and thrust of the aerospike nozzle, for the full and truncated nozzles, were investigated. The purpose of this study is …

Voltage Control In A Distribution System Using Active Power Loads, Mounika Chava

Masters Theses

"High penetration of renewable energy resources such as rooftop solar photovoltaic (PV) systems is exacerbating violations of the voltage limits in power distribution networks. Existing solutions to these over-/under-voltage issues include tap-changing transformers and shunt capacitors. However, tap changers only allow voltage changes in discrete steps and shunt capacitors cannot handle over-voltage situations. To overcome these problems, this thesis proposes voltage control in a distribution system by adjusting active power loads. The proposed solution can be used for both under- and over-voltage cases at any levels of voltage adjustment. First, the active power that needs to be adjusted at selected …

Design Methodology For Behavioral Surface Roughness Modeling And High-Speed Test Board Design, Xinyao Guo

Masters Theses

"A behavioral model is introduced, which can predict low-loss and low surface roughness transmission line time- and frequency- domain performances. High data rates push for better performance of PCB transmission lines. However, the roughness of copper foil has a considerable impact on the signal integrity performance of transmission lines at high data rates and long propagation distance. Existing models for low-loss transmission line surface roughness are inadequate. A new behavioral model to represent the surface roughness has been developed. The model is applied in the design process by adding a dispersive term to the bulk dielectric permittivity to represent the …

Protection Of A 138/34.5 Kv Transformer Using Sel 387-6 Relay, Aamani Lakkaraju

Masters Theses

"Schweitzer Engineering laboratories (SEL) donated the SEL 387, SEL 311L, and SEL 351S relays and the SEL AMS to Missouri University of Science and Technology. This thesis documents the demonstration approach to set the SEL 387 relay to protect a grounded wye-grounded wye transformer and then test these settings by injecting fault currents into the relay using the SEL AMS. This thesis explains the approach to set the differential element of the SEL 387 relay to protect a transformer against internal faults and the overcurrent element of the SEL 387 relay to protect transformer against external faults. A radial power …

Study And Development Of Robust Preformed Particle Gels For Conformance Control, Yifu Long

Masters Theses

"To improve the oil recovery of mature reservoirs, technologies referring to conformance control have been widely developed and implemented. Among various technologies, preformed particle gel (PPG) treatment has attracted increasing attentions. PPGs, as a kind of deformable plyometric superabsorbent, could be pumped through injection wells as plugging agents to block the fracture or high-permeability zone in a reservoir.

In decade usage of PPGs, an intensively employed material is poly(acrylamide) (PAM) based hydrogel. However, conventional PAM gel did reveal deficient in formidable conditions, such as formations with high temperature and high salinity. Therefore, a novel PPG based on starch-grafting-poly(acrylamide)/nano-composite (SAC) hydrogel …

Surface Modification Of Tin Oxide Nanoparticles By Atomic Layer Deposition For Enhanced Electrochemical Performance, Sai Abhishek Palaparty

Masters Theses

"Atomic Layer Deposition is a robust technique used to deposit high quality, conformal, and size-tunable ultrathin films on a substrate. This technique can be used to coat protective films on battery anode and cathode materials for enhanced performance. In the case of cathodes, the ultrathin film provides a protective barrier preventing cationic dissolution. In the case of anodes, the film acts as a supporting matrix reducing strain caused by volume expansions. In these study, we use this technique to coat an optimally thick conductive iron oxide film on tin oxide particles to improve its electrochemical performance at high current densities …

Hydrodynamic Of A Co-Current Gas Liquid Upflow In A Moving Packed Bed Reactor With Porous Catalysts, Ali Jabbar Toukan

Masters Theses

"In this study, the hydrodynamic, i.e. flow regime identification, line average liquid holdup, and the internal liquid holdup of a co-current moving packed bed reactor were studied. For the sake of hydrodynamics study, moving bed reactor is investigated as two-phase upflow packed bed reactor. Scaled down configuration was used to simulate of the moving bed reactors utilized in the industrial process. First, line average liquid holdup is measured with different geometrical configurations covering empty, dry, wet, and packed column under flowrates operation conditions. A new methodology has been developed to determine the line average liquid holdup for a porous catalyst. …

Origin Of Lacustrine Carbonate-Dominated Clinoforms In The Lower-Permian Lucaogou Low-Order Cycle, Southern Bogda Mountains, Nw China, Yiran Lu

Masters Theses

"Lacustrine carbonate clinoforms deposit can reflect ancient lake condition like paleoclimate and lake type. Complex lithofacies of a carbonate-dominated clinoform package in lower Permian Lucaogou low order cycle, Bogda Mountains, NW China, provide clues on clinoform-forming processes in a half-graben lake. The clinoform package is ~5.2 m thick, prograding from S to N for ~200 m with a maximum 15o dip angle, and spans ~4 km laterally. A clinoform consists of a lower siliciclastic-rich and an upper carbonate-rich beds, forming a clinoform cycle. Results of petrographic study of 30 thin sections suggest that the clinoform package is composed of mixed …

Gravity And Magnetic Investigations Of The North-Eastern Kansas Section Of The Midcontinent Rift System, Ozgun Kamil Sahin

Masters Theses

"The Midcontinent Rift System (MRS) is a major Precambrian magmatic province on the North American continent. It formed when the North American craton began to split apart during the Mesoproterozoic era (1,100 Ma). As a result of the extension and possibly the effects of a rising mantle plume, a thick layer of basalt and numerous reverse and normal faults were formed. The basalt layer is buried below sedimentary formations and makes it difficult for seismic techniques to image. On the other hand, gravity and magnetic methods can be utilized for focused depths, and the basalt layer of the system can …

Transient Analysis Of Lumped Circuit Networks-Loaded Thin Wires By Dgtd Method, P. Li, Y. Shi, Lijun Jiang, H. Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

With the purpose of avoiding very fine mesh cells in the proximity of a thin wire, the modified telegrapher’s equations (MTEs) are employed to describe the thin wire voltage and current distributions, which consequently results in reduced number of unknowns and augmented Courant–Friedrichs–Lewy (CFL) number. As hyperbolic systems, both the MTEs and the Maxwell’s equations are solved by the discontinuous Galerkin time-domain (DGTD) method. In realistic situations, the thin wires could be either driven or loaded by circuit networks. The thin wire–circuit interface performs as a boundary condition for the thin wire solver, where the thin wire voltage and current …

Comparison Of Robust And Probabilistic Lmi-Based Design Of Adaptive Flight Controllers With Uncertain Input Dynamics, Mario Luca Fravolini, Tansel Yucelen, Benjamin Gruenwald, Merve Dogan, Marcello R. Napolitano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Adaptive control-based schemes have been implemented to date in a variety of different ap-plications. However, the ability to obtain a predictable transient closed-loop performance in adaptive systems is still a challenging problem from a verification and validation point of view. To face this problem we have recently introduced an analysis and design framework for adaptive control systems in the presence of bounded uncertainty and bounded adaptive control (the boundedness can be enforced, for instance, by a parameter projection mechanism) showing that the transitory performance of a MRAC system can be expressed, analyzed, and optimized via a convex optimization formulation based …

Pumping Of Fresh Concrete: Insights And Challenges, Geert De Schutter, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Pumping of Fresh Concrete is of Utmost Importance for Concrete Practice. Required Pumping Pressures Are Typically Estimated based on Design Charts. However, with the Increased Use of Chemical Admixtures and the Development of More Flowable Concrete Mixtures, the Accuracy of Traditional Design Charts is Questioned. in Recent Years, Significant Progress Has Been Obtained in Understanding the Flow of the Material in the Pumping Pipe, Including the Behavior of the Lubrication Layer Near the Pipe Surface. in Comparison with Traditional Design Charts, This Results in More Reliable Pressure Predictions When Considering Very Fluid Concrete Types Like Self-Consolidating Concrete. Some Remaining Challenges …

Calculating Potential Energy Curves With Fixed-Node Diffusion Monte Carlo: Co And N₂, Andrew D. Powell, Richard Dawes

Chemistry Faculty Research & Creative Works

This study reports on the prospect for the routine use of Quantum Monte Carlo (QMC) for the electronic structure problem, applying fixed-node Diffusion Monte Carlo (DMC) to generate highly accurate Born-Oppenheimer potential energy curves (PECs) for small molecular systems. The singlet ground electronic states of CO and N₂ were used as test cases. The PECs obtained by DMC employing multiconfigurational trial wavefunctions were compared with those obtained by conventional high-accuracy electronic structure methods such as multireference configuration interaction and/or the best available empirical spectroscopic curves. The goal was to test whether a straightforward procedure using available QMC codes could …

An Integrated Completion And Reservoir Modeling Methodology For Horizontal Shale Wells: A Montney Formation Example, Rashid S. Kassim, Larry K. Britt, Shari Dunn-Norman, Bryan Lang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Montney Formation is one of the largest unconventional resources in North America covering from southwestern Alberta to northeast British Columbia. The Montney Formation has natural gas, natural gas liquids (NGL) and oil from conventional and unconventional reservoirs. The first multiple fractured horizontal well (MFHW) was drilled in 2005. However, since the first MFHW, different methods were proposed to optimize completion designs in the Montney Formation. Some of the optimized completions utilized the "operational effectiveness" of high-rate slick-water fracture designs while other designs utilized energized fracturing fluids. What has been missing was an integrated methodology that utilizes all available data …

Modeling Gas Inflow For Extremely Low Permeability Shale Using Cfd, Chatetha Chumkratoke

Doctoral Dissertations

"Computational fluid dynamics (CFD) has been used to model 2-D well inflow over a range of permeabilities to study the impact of various well completion strategies (Augustine, 2011). Augustine's 2-D model was subsequently extended for 3-D flow by Thepporprapakorn (2013), for gas flow in the permeability range of tight gas (0.01 mD).

This work presents a 3-D CFD model of gas inflow valid for extremely low ranges of permeability (0.00001 mD). In extremely low permeability, gas flow is complex and includes flow from fractures, flow through porous media, and diffusive gas transport. Diffusive gas transport is important when strong density …

Foucault Against Ethics: Subjectivity And Critique After Humanism, Patrick Gamez

Arts, Languages and Philosophy Faculty Research & Creative Works

This dissertation is in the first place an interpretation of the thought of Michel Foucault. Beyond interpretation, it also makes provides a qualified defense of his views on the significance of ethical theory, particularly in its “critical” forms, the shape of the space of reasons, and the role of subjectivity within it.

I take as my starting point an orthodox view of Foucault’s work, namely, that it can divided in terms of its content into three distinct periods. First, an “archaeological” phase spanning most of the 1960s. Second, a “genealogical” devoted to unearthing power-relations beneath purportedly progressive institutions. Finally, an …

Direct Position Control Of Dielectric Barrier Discharge Filaments, Matthew C. Paliwoda, Joshua L. Rovey, Mitchell Wainwright

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Controllable patterns of plasma filaments are being explored for reconfigurable metamaterial applications. When operated in a filamentary mode, volume dielectric barrier discharges are known to produce patterns of self-organizing plasma filaments. In this work the presence and intensity of a single filament at a fixed location is controlled by an isolated and independently electrically adjusted needle electrode. Time-averaged normalized light intensity, current, and voltage are measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD, the needle-controlled filament discharges similar to adjacent filaments at low potentials but stops discharging at a …

Using Adaptive Thresholding And Skewness Correction To Detect Gray Areas In Melanoma In Situ Images, Jason R. Hagerty

Masters Theses

"The incidence of melanoma in situ (MIS) is growing significantly. Detection at the MIS stage provides the highest cure rate for melanoma, but reliable detection of MIS with dermoscopy alone is not yet possible. Adjunct dermoscopic instrumentation using digital image analysis may allow more accurate detection of MIS. Gray areas are a critical component of MIS diagnosis, but automatic detection of these areas remains difficult because similar gray areas are also found in benign lesions. This paper proposes a novel adaptive thresholding technique for automatically detecting gray areas specific to MIS. The proposed model uses only MIS dermoscopic images to …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

Application Of Embedded Frequency Selective Surfaces For Structural Health Monitoring, Dustin Franklin Pieper

Masters Theses

"This thesis proposes the use of Frequency Selective Surfaces (FSSs) as an embedded structural health monitoring (SHM) sensor. FSSs are periodic arrays of conductive elements that filter certain frequencies of incident electromagnetic radiation. The behavior of this filter is heavily dependent on the geometry of the FSS and local environment. Therefore, by monitoring how this filtering response changes when the geometric or environmental changes take place, information about those changes may be determined. In previous works, FSS-based sensing has shown promise for sensing normal strain (a stretching or compressing geometrical deformation). This concept is extended in this thesis by investigating …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …