Digital Commons Network^™

Cellular Hitchhiking Via Injectable Microparticles, Daniel Smith

Masters Theses

"Tissue engineering is a process of developing new tissues in a host. Tissue engineering draws upon revitalizing damaged tissues that otherwise would not heal completely from the body's natural response. To augment the body's natural response to impairment, cells can be transplanted to the afflicted area to boost the healing response. Implementing these cells onto scaffolds and transplanting them into the body improves the healing response dramatically. Tissue regeneration improves when a biodegradable scaffold is used in conjunction with cells to augment the body's healing response. Microparticles provide a surface that can mimic the environment cells perceive in vivo, …

Proppant Transport With Varying Injection Points And Its Impact On Proppant Development Inside A Fracture, Shail Janakbhai Soni

Masters Theses

"This study presents experimental work which examines the effect of perforation placement and density on proppant placement within a hydraulic fracture. The study also investigates the effect of proppant angularity.

Experiments were conducted with ceramic proppant injected in a fracture slot model consisting of three injection points at the bottom, middle and top of the fracture slot, and two outlets, at the bottom and top of the fracture model. The effect of single point injection height was investigated by injecting solely at the bottom, middle or top of the apparatus, for both bottom and top outlet conditions. Multiple injection points …

The Role Of Flexural Slip In The Development Of Chevron Folds, Yuxing Wu

Masters Theses

"Chevron folds are characterized by straight limbs and narrow hinge zones. One of the conceptual models to initiate and develop chevron folds involves flexural slip during folding. While some kinematical models show the necessity for slip to initiate during chevron folding, recent numerical modeling studies of visco-elastic effective single layer buckle folding have shown that flexural slip does not result in chevron folds. In this study, several 2D finite element analysis models are run, distinguished by 1) geometry of the initial perturbation (sinusoidal and white noise), 2) varying thewavelength of the initial perturbation (10%, 50%, and 100% of the dominant …

A Network Tomography Approach For Traffic Monitoring In Smart Cities, Ruoxi Zhang

Masters Theses

"Various urban planning and managing activities required by a Smart City are feasible because of traffic monitoring. As such, the thesis proposes a network tomography-based approach that can be applied to road networks to achieve a cost-efficient, flexible, and scalable monitor deployment. Due to the algebraic approach of network tomography, the selection of monitoring intersections can be solved through the use of matrices, with its rows representing paths between two intersections, and its columns representing links in the road network. Because the goal of the algorithm is to provide a cost-efficient, minimum error, and high coverage monitor set, this problem …

Lyapunov Stability Analysis Of Switched Microgrid Systems, Bokang Zhou

Masters Theses

"In this thesis, a Lyapunov-based method for analyzing the stability of a switched microgrid system is proposed. First, a small second-order system is explored as example to demonstrate the effectiveness of switching patterns on the stability of a system switching among different respectively stable operating points. Lyapunov function is employed in order to determine the proper state-based switching conditions under which global stability is guaranteed, or under which the system is driven unstable. Then, a linearized statespace model of a looped seven-node microgrid is established. Solid-state transformers (SSTs), distributed energy storage devices and synchronous generators are introduced and modeled in …

Card: Concealed And Remote Discovery Of Iot Devices In Victims' Home Networks, Sammie Lee Bush

Masters Theses

"Smart devices are becoming more common in the standard households. They range from lights to refrigerators and their functionality and applications continues to grow with consumer demand. This increase in networked, complex devices has also brought an increase in vulnerabilities in the average consumer's home. There now exists an Internet of Things (IoT) ecosystem that creates new attack vectors for adversaries to spread malware, build botnets, and participate in other malicious activities. We will overview some of these new attack vectors as well as go over a framework that would allow an adversary to target a user's home network and …

Reprocessing Of 3c-2d Seismic Reflection Data From The Spring Coulee Field, Alberta, Yasin Demir

Masters Theses

"The 3C-2D seismic datasets were acquired in 2008 in the Spring Coulee Field, Alberta, which is located in Township 4, Range 23, and west of the 4th Meridian in the Alberta Basin. Line 2008-SC-01 was reprocessed to obtain better image of the formation targeted at between 1300 ms and 1400 ms. The depositional settings of the Madison Formation consist of shallow and carbonate shelf deposits. The processing workflow was designed by testing several methods, algorithms, and parameters, and finding the optimal processing solution. The processing steps included elevation statics, noise suppression, deconvolution operator, and 2D Kirchhoff poststack time migration. In …

Developing An Energy Efficient Real-Time System, Aamir Aarif Khan

Masters Theses

"Increasing number of battery operated devices creates a need for energy-efficient real-time operating system for such devices. Designing a truly energy-efficient system is a multi-staged effort; this thesis consists of three main tasks that address different aspects of energy efficiency of a real-time system (RTS).

The first chapter introduces an energy-efficient algorithm that alternates processor frequency using DVFS to schedule tasks on cores. Speed profiles is calculated for every task that gives information about how long a task would run for and at what processor speed. We pair tasks with similar speed profiles to give us a resultant merged speed …

Analyzing Sensor Based Human Activity Data Using Time Series Segmentation To Determine Sleep Duration, Yogesh Deepak Lad

Masters Theses

"Sleep is the most important thing to rest our brain and body. A lack of sleep has adverse effects on overall personal health and may lead to a variety of health disorders. According to Data from the Center for disease control and prevention in the United States of America, there is a formidable increase in the number of people suffering from sleep disorders like insomnia, sleep apnea, hypersomnia and many more. Sleep disorders can be avoided by assessing an individual's activity over a period of time to determine the sleep pattern and duration. The sleep pattern and duration can be …

Quantifying On-Orbit Performance Of Cubesat Micropropulsion Systems By Observing Orbital Element Variations, Bradyn William Morton

Masters Theses

"The Advanced Propulsion Experiment mission in development by the Missouri University of Science and Technology's satellite research team (M-SAT) is a technology demonstration mission of a multi-mode propulsion system. The true test of any satellite propulsion system is the on-orbit performance. The purpose of this research is to develop methods for quantifying the on-orbit performance of the multi-mode propulsion system. This performance can be determined by observing the small variations in the orbital element parameters and using a differential corrector with the Gauss Variation of Parameter equations. Furthermore, this research could be used to determine and quantify a propulsion system's …

Analyzing Large Scale Trajectory Data To Identify Users With Similar Behavior, Tyler Clark Percy

Masters Theses

"In today's society, social networks are a popular way to connect with friends and family and share what's going on in your life. With the Internet connecting us all closer than ever before, it is increasingly common to use social networks to meet new friends online that share similar interests instead of only connecting with those you already know. For the problem of attempting to connect people with similar interests, this paper proposes the foundation for a Geo-social network that aims to extract the semantic meaning from users' location history and use this information to find the similarity between users. …

Impact Of Probable And Guaranteed Monetary Value On Cybersecurity Behavior Of Users, Santhosh Kumar Ravindran

Masters Theses

"This research examines the impact of probable and guaranteed monetary gains and losses on users' cybersecurity behavior. It also examines perceptual outcomes such as threat severity, trust, and fear that are associated with users' cybersecurity behavior. Drawing on Prospect Theory in the behavioral economics and decision-making literature, hypotheses were generated for the research. The hypotheses state that: (i) users are more willing to engage in risky computer security behavior to avoid a loss than to receive a gain, (ii) users exhibit a higher tipping point of expected monetary value to receive a gain than to avoid a loss for engaging …

Neural Correlates Of Flow, Boredom, And Anxiety In Gaming: An Electroencephalogram Study, Tejaswini Yelamanchili

Masters Theses

"Games are engaging and captivating from a human-computer interaction (HCI) perspective as they can facilitate a highly immersive experience. This research examines the neural correlates of flow, boredom, and anxiety during video gaming. A within-subject experimental study (N = 44) was carried out with the use of electroencephalogram (EEG) to assess the brain activity associated with three states of user experience - flow, boredom, and anxiety - in a controlled gaming environment. A video game, Tetris, was used to induce flow, boredom, and anxiety. A 64 channel EEG headset was used to track changes in activation patterns in the frontal, …

The Development Of A New Formulation Of Fly Ash Class C Based Geopolymer And Assessing Its Performance In Presence Of Drilling Fluid Contamination, Mohamed Saad Ahdaya

Masters Theses

"Cementing is one of the most critical steps in the drilling and completion of oil wells. Traditionally, Portland cement is used for oil cementing operations; however, geopolymer materials have recently attracted much attention because they are more cost-effective and have less environmental impacts.

An intensive laboratory work was conducted to obtain a new formulation of fly ash class C based geopolymer cement to be used as a potential alternative cementing material to Portland cement in oil and gas cementing. Twenty-four variations of fly ash class C based geopolymers were prepared, and by comparing several of their properties using API standard …

Bridge Deck Assessment Using Visual Inspection, Ground Penetrating Radar, Portable Seismic Property Analyzer-Ultrasonic Surface Wave, Hammer Sounding And Chain Drag, Abdullah Hadi Zaid Alhaj

Masters Theses

"Integrated non-destructive techniques were utilized to assess the condition of a reinforced concrete bridge deck. There were two main objectives accomplished.

The first objective was to assess the integrity of the reinforced concrete bridge deck using four non-destructive techniques, namely visual inspection, ground penetrating radar, portable seismic property analyzer-ultrasonic surface wave, and hammer sounding and chain drag. Visual inspection data were used to identify signs of deterioration on surface of the bridge deck such as cracking, concrete leaching, and reinforcement corrosion. Ground penetrating radar data were used to determine the relative condition of the bridge deck. However, due to the …

New Nanoparticle Water-Based Drilling Fluid Formulation With Enhanced Thermal Stability And Inhibition Capabilities In The Woodford Shale, Jose Aramendiz Pacheco

Masters Theses

"Drilling fluid design for unconventional reservoirs aims at preventing formation instability problems associated with fluid invasion, shale swelling, and cuttings dispersion. Although oil-based mud (OBM) can be used to achieve these goals, environmental and economic concerns limit its application. This experimental study evaluated the potential use of nanoparticles (NP) to improve water-based mud (WBM) inhibition capabilities and its ability to enhance the overall drilling fluid thermal stability while providing a cleaner technology to the industry.

Characterization of Woodford shale was completed with X-ray diffraction, cation exchange capacity, and scanning electron microscopy, silica, and graphene NP were characterized with aqueous stability …

Developing A Methodology For Estimating The Growth Of Radiated Emission From Multi-Modular Systems, Kaustav Ghosh

Masters Theses

"The large multiscale problems are commonly faced in real-world applications such as analysis of electromagnetic interference for a printed circuit board installed on a large platform with connected cables, wires and other high speed interfaces. EMI problems are not uncommon in high speed systems which involve multiple modules of complex hardware. As the system clock frequency and data rate increases, so does the challenges in controlling the EMI in such systems. The costs to prototype and to develop networking equipment are growing as a result of increasing complexities and densities. EMC regulations require radiated emission testing to be done in …

Application Of Seismic Attributes For 3-D Seismic Visualization Contributed In Structural And Stratigraphic Interpretation Of The Tangahoe And Farewell Formations In The Kupe Field, Taranaki Basin, New Zealand, Housam Hussein Grabeel

Masters Theses

"Taranaki Basin is a mainly offshore basin covering an area of approximately 100,000 km², elongated across the western margin of New Zealand's north island. However, the modern limit of the basin is extended toward the deep water to cover about 330,000 km². The basin is divided by tectonic activities into northern and southern grabens. The southern region has become the most extensively researched district in recent years as its prime lithology and structural trap distributions provide numerous hydrocarbon fields. One such field is the Kupe Field (256 km²), which lies on a northerly-plunging, reverse-faulted, …

Field Implementation Of Cement-Based Composite Strengthening Technologies, Michael Andrew Janke

Masters Theses

"With infrastructure continuing to age, technologies are being developed to strengthen structures as a more sustainable option than replacement. The use of fiber-reinforced cementitious matrix (FRCM) strengthening systems is a promising new technology for adding flexural and shear capacity to existing reinforced concrete members. While cement based systems with carbon, PBO, and steel have all been implemented in a lab setting, there is not research data available for installation in the field. FRCM composites have advantages over more widely used fiber reinforced polymer (FRP) composites such as heat resistance and compatibility with concrete substrate. FRP systems have previously been field …

Smart Augmented Reality Instructional System For Mechanical Assembly, Ze-Hao Lai

Masters Theses

"Quality and efficiency are pivotal indicators of a manufacturing company. Many companies are suffering from shortage of experienced workers across the production line to perform complex assembly tasks such as assembly of an aircraft engine. This could lead to a significant financial loss. In order to further reduce time and error in an assembly, a smart system consisting of multi-modal Augmented Reality (AR) instructions with the support of a deep learning network for tool detection is introduced. The multi-modal smart AR is designed to provide on-site information including various visual renderings with a fine-tuned Region-based Convolutional Neural Network, which is …

An Investigation Into The Effects Of Ion Tracks On Α-Quartz, Bryant Alan Kanies

Masters Theses

"The passage of a swift heavy ion through a material can cause columnar, amorphous nano-structures known as ion tracks. Swift heavy ions are present in a number of applications ranging from nuclear reactors to nuclear waste storage and onboard spacecraft. The study of ion tracks has been ongoing since the late 1950s and has led to several technological advancements. In fact, ion beams have been used to enhance material properties and aid in the production of electrical components. Ion beams, and their resultant ion tracks, can therefore be seen as a method to purposefully alter material properties such as thermal …

Is A Measure Of Observed Engagement As Valid As Self-Reported Engagement Measure?, Debarati Majumdar

Masters Theses

"The present study attempted to investigate a never explored research question, i.e., whether an observed engagement measure would be as valid as self-reported engagement measure. Data were collected from the employees of an academic institute. Minimum of 110 self-ratings from subordinate employees (i.e. the self-raters) and 110 observer-ratings from those subordinates' respective supervisor employees (i.e. the other raters) were supposed to be collected to robustly test the formulated hypotheses of the present study. However, due to some sudden structural changes within the organization (i.e. the academic institute from where data were collected), only 32 observer-ratings and 32 self-ratings (i.e. 32 …

Classification Of Eeg Signals Of User States In Gaming Using Machine Learning, Chandana Mallapragada

Masters Theses

"In this research, brain activity of user states was analyzed using machine learning algorithms. When a user interacts with a computer-based system including playing computer games like Tetris, he or she may experience user states such as boredom, flow, and anxiety. The purpose of this research is to apply machine learning models to Electroencephalogram (EEG) signals of three user states -- boredom, flow and anxiety -- to identify and classify the EEG correlates for these user states. We focus on three research questions: (i) How well do machine learning models like support vector machine, random forests, multinomial logistic regression, and …

Modulated Photothermal Radiometry: Detector Sensitivity Study And Experimental Setup, Jessica Nicole Seals

Masters Theses

"This thesis outlines the development of a system used for determining the surface thermal diffusivity of both non-irradiated and irradiated materials. The motivation for this work is to establish a modulated photothermal radiometry (PTR) system on the campus of Missouri University of Science and Technology. One of the main efforts described in this thesis is the design and construction of the physical apparatus. Along the way, it was necessary to perform a detailed sensitivity analysis of the system to determine whether the expected signal emitted from the sample falls within the bounds of detectivity for the HgCdTe (MCT) detector used …

Tvs Transient Behavior Modeling Method, And System-Level Effective Esd Design For Usb3.X Interface, Pengyu Wei

Masters Theses

"This research proposal presents a methodology whereby a protection device can be modeled in SPICE compatible platforms with respect to the transient behaviors during Electrostatic Discharge (ESD) events. This methodology uses an exclusively "black-box" approach to characterize the parameters of the protection device, thereby allowing it to be implemented without intimate knowledge of the DUT. Results of this methodology can be used to predict the transient response (conductivity modulation and snapback delay) of the ESD protection devices, and thereby predicts how much current could flow into the device (typically a digital IO pin) under protection. The transient behavior modeling methodology …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

The Thermal Effects Of Daylighting In An Energy Efficient Home, Thomas Glenn Yarbrough Ii

Masters Theses

"Current trends in building design and construction emphasize the use of natural daylighting to illuminate a building's interior. This study investigated the energy savings that could be obtained through the use of daylighting compared to additional heating and cooling loads attributed to the glazing required for daylighting. The study, through a combination of experimentation and computer model validation, aimed to determine energy saved from daylighting through illumination metering during a nine-month study period. Energy usage trends during this period were observed using circuit-level monitoring equipment. It was determined that, at select times of the year, energy used to account for …

Distributed Fiber Optic Sensors For Monitoring Spatially Continuous Strain And Quasi-Distributed Refractive Index Using Optical Frequency Domain Reflectometry, Sasi Jothibasu

Masters Theses

"This thesis is comprised of two papers and they describe distributed fiber optic sensing using an optical frequency domain reflectometry (OFDR) instrumentation system.

The first paper presents about distributed fiber optic sensor embedded within the layers of a composite laminates to monitor the continuous profile of strain using the optical frequency domain reflectometry (OFDR) system. The OFDR system was used to analyze the Rayleigh backscattered signal. The shift in the Rayleigh backscattered spectrum (RBS) was observed to be linearly related to the change in strain of the composite material. The continuous strain sensing using OFDR was demonstrated by an INSTRON …

Reputation And Credit Based Incentive Mechanism For Data-Centric Message Delivery In Delay Tolerant Networks, Himanshu Jethawa

Masters Theses

"In a Data-centric Delay Tolerant Networks (DTNs), it is essential for nodes to cooperate in message forwarding in order to enable successful delivery of a message in an opportunistic fashion with nodes having their social interests defined. In the data-centric dissemination protocol proposed here, a source annotates messages (images) with keywords, and then intermediate nodes are presented with an option of adding keyword-based annotations in order to create higher content strength messages on path toward the destination. Hence, contents like images get enriched as there is situation evolution or learned by these intermediate nodes, such as in a battlefield, or …

Fluid Flow In A Krogh Cylinder: A Model For A Single Capillary And Surrounding Tissue, Xianjie Qiu

Masters Theses

"A model describing the flow of plasma from the capillaries to the interstitial space in the extravascular tissue and back into the capillaries is constructed and solved. The flow through the tissue or the interstitial spaces is described by the Brinkman equation for porous medium, modified to account for the presence of cells considered as spheres. The flow of blood through the capillaries is considered to be that of a Newtonian fluid. The flow between capillary and tissue is coupled by the permeability of the capillary wall. The nature of flow and its magnitude was found to be highly dependent …