Digital Commons Network^™

Effect Of Carbon Content In Steels Upon The Deposition Of Titanium From A Fused Salt Bath, Reinhard Paul Abendroth

Masters Theses

"STATEMENT OF PROBLEM Previous work done at the Missouri School of Mines and Metallurgy on the deposition of titanium upon various metals, especially iron and steel, bas shown that titanium can be deposited upon ingot iron and. low carbon steels with comparitive ease. Difficulty was encountered in attempts to deposit titanium upon steels of higher carbon content and upon cast irons.

For this reason, it was decided to investigate more thoroughly the relationship between the carbon content of various steels and the quality of titanium coatings deposited on these steels. Once this relationship had been established, a suitable theoretical explanation …

Corrosion Products Of Titanium In Fused Salt Baths, Kai-Chai Chiou

Masters Theses

"Titanium is gaining great interest in the modern metal industry because of its natural abundance and its desirable physical and chemical properties. Among them, its excellent corrosion resistance, such as the resistance to normal atmosphere attack, humid and saline atmosphere attack, sea water attack, and nitric acid attack, is the most prominent characteristic being welcomed by the engineers. The usefulness of titanium would be greatly increased if it were possible to plate titanium on other metals, thus increasing the corrosion resistance of these other metals.

Much concern, at present, has been given to the possibilities of the electrodeposition of titanium …

The Use Of A Steady State Flow Reactor In The Study Of Rapid Gas Phase Reactions, Ormond Kennedy Lay

Masters Theses

"The demonstration of the feasibility of rocket propelled devices for various purposes within the past few years has initiated an intensive search for suitable reactants for use as rocket fuels. Consequently, the investigation of the properties of chemical reactions which rapidly liberate large quantities of energy has assumed major importance. In order that such reactions may be adapted to practical use as rocket propellants knowledge of the characteristics of these reactions is required. Properties such as+ the mechanism of the reaction, the speed of the reaction under varied conditions of temperature, pressure and concentrations, the conditions required for the initiation …

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

An Investigation Of The Characteristics Of High Alumina Refractory Castables, Gajendra Nath Mohanty

Doctoral Dissertations

"Refractory castables or concretes, a comparatively new member of the refractories family, are an admixture of highly aluminous cements and graded refractory aggregates, blended in predetermined proportions very much like structural concrete. The refractory aggregates must contain a large amount of fines contrary to the requirements of ordinary concrete. Unlike the Portland cements, which are mainly combinations of calcium silicates, the highly aluminous cements are predominantly calcium aluminates. They are comparatively of a refractory natures, having the hydraulic setting property combined also with high early strength. The discovery of the fact that these refractory concretes could be cast, in situ, …

The Mineralogy Of The Grassy Creek And Saverton Formations, Dirk Pieter Van Duym

Masters Theses

"A study of the mineralogy of the Grassy Creek and Saverton formations of Northeast Missouri was undertaken to determine whether a division is justified, as proposed by some stratigraphers, of these argillaceous beds into two formations. The formations were sampled systematically at surface exposures on the northeast limb of the Lincoln Arch in the vicinity of Hannibal and Louisiana, Missouri. The samples were investigated mineralogically in the laboratory. Previous studies showed that the fossils of the Grassy Creek and Saverton beds were virtually identical. The present study demonstrates that the Grassy Creek and Saverton beds are too near alike in …

Determination Of The Thermal Conductivity Of Sodium Chloride At Elevated Temperatures, Harold Robert Weisbrod

Masters Theses

"The purpose of this research is to investigate possible methods of determining the thermal conductivity of small poorly conducting samples at elevated temperatures, and, further, to assemble a suitable apparatus, followed by measurement of thermal conductivity of one or more cubic lattice samples.

Basic requirements of the apparatus are few. It is first required that the measurement of thermal conductivity be made over a considerable range temperature. It is also preferred that the basic apparatus be placed in a vacuum where undesirable heat flow by convection is eliminated and air corrodible samples are preserved.

The apparatus must use only the …

Geology Of The South Half Of The Meramec Spring Quadrangle, Missouri, Howard Joseph Yorston

Masters Theses

"This report is a continuation of the work initiated by Mueller in his mapping of the north half of the Meramec Spring Quadrangle. The completion of this work provides not only a geologic map of the whole quadrangle but also completes the mapping of the geology of a strip of quadrangles extending from Rolla to the Mississippi River. In addition to being a step closer to the goal of complete geologic coverage for the state, this work will be of value to those concerned with the prediction of depths of wells drilled in search for water, which in view of …

A Study Of The Deformation Texture And Its Variation In Cold Drawn Nickel Rods, Krishan Kumar Tangri

Doctoral Dissertations

"The production of rods by cold drawing is a development of recent years as compared to other methods of fabrication. Though a good many investigations correlating the observed mechanical properties to the mill practices employed have been reported, the results nevertheless are more of a qualitative and empirical nature. It is well known that the physical properties of a metal product are related to its deformation textures which are characteristic of the metal and the fabricating method used. Thus a study of the deformation textures of cold-drawn rods, specially by x-ray diffraction techniques should provide a much more precise and …

Hydrogen Overvoltage On Titanium, Sheng-Tai Shih

Doctoral Dissertations

"The hydrogen overvoltage has been defined as the difference between the potential of the working electrode (cathode) and the theoretical reversible value for the same solution. This definition brings out the difficulty involved in the measurement of the "theoretical reversible potential for the same solution” as the potential of the hydrogen electrode in such a solution is usually different from the value of a standard reversible hydrogen electrode, for which the activity of hydrogen ions is set as being “1” and the potential arbitrarily set as being “0”. Besides, it is sometimes necessary to add addition agents to the solution …

The Rate Of Dissolution Of Aluminum In Hydrofluoric Acid, Yen-Ngen Wang

Doctoral Dissertations

"Pure aluminum has a relatively low strength, and its use is, therefore, rather limited. However, the resistance of pure aluminum to the attack of acids and many neutral solutions is higher than that of less pure aluminum or most of the aluminum-base alloys. For this reason, alclad alloy sheets, are made with a coating of pure aluminum on one or both sides of an aluminum alloy core. The coating is metallurgically bonded to the core over the entire area of contact. Thus the coating electrochemically protects the core from corrosive attack.

Aluminum is more negative in the electrochemical series than …

The Missouri Miner, December 04, 1953

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 20, 1953

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, November-December 1953, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Missouri Miner, October 23, 1953

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 09, 1953

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, May 22, 1953

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, May-June 1953, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Preparation Of Zirconium Powder, Herbert S. Kalish

Professional Degree Theses

"The preparation of zirconium powder by several different methods is fully described and evaluated. Most of the methods described are of a rather classical nature and these methods are discussed as taken from their original sources with suggestions for possible streamlining. Flow sheets are provided.

The first series of steps to produce zirconium powder is almost invariably the production of pure zirconium tetrachloride or pure zirconium oxide from the tetrachloride. The processes described include the sodium reduction of zirconium tetrachloride, sodium reduction of the double alkali fluorides, the calcium reduction of zirconium oxide, hydrogen embrittlement and comminution of reduction products. …

The Bloating Of Missouri's Shales, Peter Kurtz Jr.

Masters Theses

"The first objective of this investigation was to determine which deposits of clays, shales, and loesses in Missouri are suitable for use in the production of lightweight aggregate by virtue of their expanding characteristics upon heating. The second objective was to determine, if possible, commercially feasible additions that will produce the bloating property in shales that do not naturally bloat.

There are two conditions which must be met in firing in order to bloat a clay or shale. First, a gas must be formed and evolved during firing. Second, enough glass of the proper viscosity must be formed to trap …

Photoelastic Investigation Of The Stresses In A Capless Connecting Rod, Gerald Delaine Smith

Masters Theses

"For a great many years the primary method used to solve engineering problems was by the use of mathematics. However, rigorous and simple mathematical solutions are only possible if the geometry of the member and its loadings are relatively simple. When irregular shapes with complex loadings are encountered, rigorous mathematical solutions for stresses induced are either impossible or very cumbersome. In such cases, the engineer must resort to other methods which are available today.

This paper attempts to show the application of the photoelastic method to such a problem. Moreover, it will show the comparative ease with which the designer …

Runoff And Soil Moisture, John William Clark Jr.

Masters Theses

"Hydrology is the science treating of water from the time it hits the earth until it leaves the earth. This never ending movement of water is called the "hydrologic cycle" and is best summarized graphically. The hydrologist is primarily concerned with rainfall, runoff and evaporation. One of the basic aims of the science is to compute the surface runoff from any rain on a given area. Surface runoff is here considered as that water which reaches the channels without penetrating the ground, plus subsurface storm flow. Subsurface storm flow is slower than surface runoff but faster than ground water flow. …

The Effect Of Air-Entrainment On Concrete Containing Chert Gravel, Ali Erdogan Dinc

Masters Theses

"The problem which the writer is analyzing in this paper has been suggested to him by Prof. Carlton of the Civil Engineering Department. It consists of two parts.

1. 1. Bar-Run aggregate is to be obtained from Springcreek near Rolla. This material is to be screened and recombined to obtain the best gradation for highest strength concrete obtainable.
2. Durability studies are to be made on the concrete resulting from best established mix by varying the amount of air entrainment compound (Vinsol Resin) to be added to the cement"--Introduction, page 1.

A Petrographic And Chemical Study Of The Bevier Coal Seam, Philip John Clarke

Masters Theses

"Samples of coal were taken at three inch intervals vertically down the Bevier seam at three localities in Macon and Randolph Counties. Channel samples were collected at the three localities. All samples were analyzed for ash content, total sulphur content, crucible swelling number, and volatile content. The channel samples were analyzed for "pyritic" sulphur, “sulphate" sulphur, and "organic" sulphur. Thin sections of the samples were used in an estimation of anthraxylon and attritus contents.

In all the samples studied, volatile content of the coal seemed to be related to the ash content and the sulphur content. Crucible swelling number also …

The Holding Strength Of Crimps On Tubes, Aydin Cansever

Masters Theses

"The object of this thesis is to determine by analytical means and laboratory tests the holding force of various crimp methods of fastening sheet metals and special tubing. The study is conducted with heat treated Aluminum alloy 24S.T3.

The problem of joining relatively thin walled tubing of high strength material or the application of a plug to such a tube has been investigated by many manufacturers, but the literature in this field is limited and still there are many cases where a better method may prove very useful. At the suggestion of Dr. Aaron J. Miles, the author decided to …

Plastic Deformation Of Rocks, Muhammed Abdul Waheb

Masters Theses

"The purpose of this investigation is to search for a method by which the strength properties of a rock may be described.

For this purpose, an attempt has been made to find out some relationship by which the rooks may be classified or described. For the solution of problems of mine stability, the mechanical properties of a rock should be known, i.e., hardness, toughness and strength. It is difficult to make a study of some method of classification or description of a rock without knowledge of these properties.

With a view to achieve the solution of a general classification for …

The Lattice Constant And Coefficient Of Expansion Of Chromium, Chao-Ching Weng

Masters Theses

"The most important use of chromium, other than as an alloying element in the manufacture of stainless steel, is for electroplating; to form a coating on other metals for corrosion prevention in order to procure longer life, and to achieve a decorative effect.

The physical properties of chromium are important in the effectiveness of its uses, and its lattice constant, as well as coefficient of thermal expansion, seem worthy of exact determination.

A number of research workers, over a span of thirty years, have spent considerable effort in determining the aforementioned constants. However, their results do not check, and the …

The Missouri Miner, November 14, 1952

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, May 02, 1952

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, March 14, 1952

The Missouri Miner Newspaper

No abstract provided.