Digital Commons Network^™

Mechanical Testing Protocol For Characterizing Composite Lamina Pre-Pregs, Kenneth Blain Ainslie, Joshua Gustav Brinkmann

Materials Engineering

Zodiac Aerospace currently employs finite element analysis (FEA) computer models to predict the material behavior of its composite products. The objective of this project was to develop a testing protocol for obtaining detailed material property data to use in these FEA models. With accurate material data, FEA models can reduce the need for expensive physical testing and achieve timely troubleshooting when testing complex components. The specific material characterized in this project was an 8-satin weave fiberglass phenolic pre-preg used as the facesheet material in many of Zodiac’s sandwich panel composites. The developed testing protocol involved mechanical testing of lamina and …

Effect Of Composition And Build Direction On Additively Manufactured Hastelloy X Alloys, Justin A. Spitzer, Jeffrey T. Schloetter, Sarah Zerga

Materials Engineering

Microcracking has caused premature failure and reduction in properties in additively manufactured (AM) Hastelloy X. The purpose of this research is to meet or exceed the mechanical properties of wrought Hastelloy X by modifying the composition and build direction of Hastelloy X manufactured using Direct Metal Deposition (DMD). Tensile testing, scanning electron microscopy (SEM), and metallography were performed on the samples. ANOVA was used to analyze the dependence that the properties had on build direction and composition. The nominal composition wrought samples had a yield strength of 310.1 MPa and a 60.79% Elongation. Alloy P60-X18 in a horizontal build had …

Comparison Of Intrusive And Non-Intrusive Methods For Corrosion Monitoring Of Fuel Processing Systems, Armando Jacob Espinoza, Thomas Conner Field

Materials Engineering

This presentation contains an assessment of the best overall corrosion monitoring device, intrusive or non-intrusive, for use in the petrochemical industry. Corrosion in the petrochemical industry is a large issue because it causes a deterioration of pipe integrity in fuel processing systems. A reduction of pipe wall integrity due to corrosion could result in a leak or an explosion of fuel processing lines since those systems function at high pressures. The use of corrosion monitoring systems in the petrochemical industry helps to detect early signs of corrosion prior to failure so that proper maintenance can be performed to prevent catastrophe. …

Investigation Of A Method To Determine Mechanical Properties Of Integral Composite Hinges For Application In Foldable Skis, Jada Evers, Kathryn Johnson

Materials Engineering

No abstract provided.

Predicting Service Life Of 347 Stainless Steel Pipes By Carburization Rate Measurement, Tyler L. Sura

Materials Engineering

Chevron Corporation and other refiners face challenges predicting the service life of piping in coker furnaces. This is largely due to a build up coke on a single surface of the piping. This coke build up results in carbon penetration into the surface of the 347 stainless steel used for the pipes. Carbon penetration can lead to degradation of the surface and ultimately, the failure of the pipe. Current modeling software has difficulty predicting the influence of sulfur on the carbon penetration rate. This study aims to provide a baseline for further study into the subject. The carbon penetration rate …

Development Of Low Cost Braze Alloys For Aerospace Applications, Alyssa M. Elliott, Sandy Babich, Blake Whitmee

Materials Engineering

Non-precious metal braze alloys can help lower the cost of brazing, which is a commonly-used joining process in the aerospace industry. A-286, a stainless steel superalloy, and Inconel© 718, a nickel-based superalloy, are both commonly used alloys at Aerojet Rocketdyne. Both alloys were brazed into butt joints using nickel-based braze alloys: AMS 4776, 4777, and 4778. The brazed samples were machined into a modified version of the ASTM E8 subsize specimen samples and tensile tested to compare the strength and calculated elongation of the brazed samples to the base metals’ properties. All of the brazed samples fractured at the joint, …

Internship In Agriculture Education-Shafter High School, Teddi Nichols

Agricultural Education: Graduate Internship Reports

The internship and project report includes validation documents required for a secondary level agriculture education program. The documents are concurrently used for the Agriculture Incentive Grant review process at Shafter High School. The supporting documents include information to receive local and state funding, outline the agriculture program goals and objectives, along with an overview of Shafter FFA and the community.

Chowchilla Union High School Agriculture Department Comprehensive Plan 2016-2017, Kassie Dewey

Agricultural Education: Graduate Internship Reports

This internship and project report includes documentation required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The documents are concurrently used for the Agriculture Incentive Grant review process at Chowchilla Union High School conducted by representatives of the California Department of Education. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Chowchilla Union High School, the agriculture program and the community.

Graduate Internship Report - Oakdale High School, Isaac Robles

Agricultural Education: Graduate Internship Reports

This report discusses the quality criteria for secondary-level programs of instruction in agriculture and also includes the validation documents required in meeting the various criteria. These documents are also cataloged for the Agriculture Incentive Grant review process at Oakdale High School conducted by the Agricultural Education unit of the California Department of Education.

Master's Of Agricultural Education, Kevy Mendes

Agricultural Education: Graduate Internship Reports

This internship and project report includes validation documents required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The documents are concurrently used for the Agriculture Incentive Grant review process at Exeter Union High School conducted by representatives of the California Department of Education. The internship includes the development of raised planter beds at the Exeter Union High School Farm. This project will enable students from other schools in the district to participate in an SAE in production and/ or horticulture. The supporting material includes information to receive state and local funding, outline the goals and objectives …

The Recovery Of Protein From Egg Yolk Protein Extraction Granule Byproduct, Irene Jennifer Kaufman

Master's Theses

In addition to proving an excellent source of nutrients, eggs are used in the food, cosmetic, and biotechnology industries for their rheological and bioactive properties. Much of the potential for the added value is in individual components of the egg, rather than the whole egg. At low speed centrifugation, yolk separates into two distinct fractions—granules and plasma. It is becoming increasingly popular in the industry to remove the plasma fraction of the egg yolk to use for its livetins, particularly immunoglobulin Y, leaving behind a granule by-product (“yellow cake”). Previous research has shown potential added-value from the granule fraction, especially …

Performing A Practical Paging Attack On The Lte Network, Nathan H. Yee

Computer Science and Software Engineering

No abstract provided.

A Survey Of Addictive Software Design, Chauncey J. Neyman

Computer Science and Software Engineering

The average smartphone owner checks their phone more than 150 times per day. As of 2015, 62% of smartphone users had used their phone to look up information about a health condition, while 57% had used their phone to do online banking. Mobile platforms have become the dominant medium of human-computer interaction. So how have these devices established themselves as our go to connection to the Internet? The answer lies in addictive design. Software designers have become well versed in creating software that captivates us at a primal level. In this article, we survey addictive software design strategies, their bases …

An Analysis Of Heroku And Aws For Growing Startups, Colton B. Stapper

Computer Science and Software Engineering

This project presents information on the architecture of most modern cloud-hosting platforms, and gives a cost-benefit analysis of two common Platform-as-a-Service (PaaS) companies: Heroku and AWS.

Djukebox: A Mobile Application Senior Project, Alexander M. Mitchell

Computer Science and Software Engineering

I’m going to discuss the process used to research, design, and develop a mobile application to handle song requests from patrons to disc jockeys. The research phase was completed in the first half of the project, during CSC-491, along with much of the design. The rest of the design and all of the development was completed during CSC-492. Once development began there were times when reverting back to the design phase was needed, which became apparent as more was learned about the mobile platform chosen for development, Android, and the backend server utilized, Google Firebase. Ultimately the project was purely …

Senior Project: Calendar, Jason L. Chin

Computer Science and Software Engineering

This calendar application is meant to help individuals with busy schedules. Those who must balance their time between working on multiple simultaneous projects would categorize key users. In the application, users will be able to participate in multiple projects at any one time. When a user is in a project, they will be able to create tasks, add tasks, be assigned to tasks, and add other users to the project. A key feature in this application is that each user is provided a personal project. In their personal project, any task assigned to the user from any project, will be …

Improvements For The T0c+ Geometry Of The Fast Interaction Trigger (Fit) Upgrade To Alice At The Cern Lhc, Noah Miller

Physics

The purpose of the ALICE experiment at CERN is to investigate the properties of the strongly interacting quark-gluon plasma formed in the high-energy collisions of lead nuclei in the CERN Large Hadron Collider. ALICE has been collecting data since 2009. The upcoming upgrade of the CERN LHC injectors during 2019-20 will boost the luminosity and the collision rate beyond the design parameters for several of the key ALICE detectors including the forward trigger detectors. The new Fast Interaction Trigger (FIT) will enable ALICE to discriminate beam-beam interactions with a 99% efficiency for the collisions generated by the LHC at a …

On-Sight Shifting At The Cryogenic Underground Observatory For Rare Events, Aaron C. Wong

Physics

During the summer of 2016, four Cal Poly students traveled to Assergi, Italy to contribute to the CUORE collaboration which is in search of a rare process called neutrinoless double beta decay. If detected, neutrinoless double beta decay will make break throughs in particle and nuclear physics, and will be the first observation of lepton number violation. The Cal Poly students provided on-sight shifting support during the installation phase of the project. This is a breakdown of the physics behind CUORE and Cal Poly's contribution.

Slither.Io Deep Learning Bot, James Caudill

Computer Engineering

Recent advances in deep learning and computer vision techniques and algorithms have inspired me to create a model application. The game environment used is Slither.io. The system has no previous understanding of the game and is able to learn its surroundings through feature detection and deep learning. Contrary to other agents, my bot is able to dynamically learn and react to its environment. It operates extremely well in early game, with little enemy encounters. It has difficulty transitioning to middle and late game due to limited training time. I will continue to develop this algorithm.

Sense Yo Soles, Aimee M. Davis, Anthony S. Childers, Alexander Bravo

Computer Engineering

The Sense Yo Soles project is a system that is embedded into a shoe insert; the plantar pressure distribution is measured by calculating the ratio of pressure on 6 individual pressure sensors located on the lateral, medial, and heel areas of both the left and right foot to the total pressure distributed across both feet. The alpha prototype created by our client and her Biomedical Engineering senior project team at San Jose State University, measured and analyzed data using the above method while connected to power and a computer. In CPE 350, we made the system stand alone and wireless …

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker

Electrical Engineering

As the necessity for renewable energy increases, solar power becomes more and more prevalent. At the same time, as technology increases, the necessity for charging one’s electronic devices also increases. The Solar Roller merges solar energy with the ability to charge one's electronic device in one compact cart. The Solar Roller is a solar-powered USB charging station that allows people of all backgrounds to develop a better understanding of alternative fuels, while charging their USB device. It has a touch screen display that provides voltage levels of the battery as well as a TV that displays solar powered information. The …

Microgrid Protection Student Laboratory, Ian Hellman-Wylie, Joey Navarro

Electrical Engineering

To better prepare students for careers in the electric power industry, specifically in the discipline of power system protection, the Electrical Engineering Department at Cal Poly San Luis Obispo proposed an initiative calling for the creation of new laboratory curriculum that uses microprocessor-based relays to give students hands-on experience in the application of protection theory. This report describes the creation of a system that meets this need by providing a laboratory-scale power system that demonstrates the use of common protective relays and protection schemes. This system provides a platform for laboratory coursework using protective relays for transmission line, transformer, and …

Solid State Drive, Shaun A. Steele

Electrical Engineering

This project documents the design and implementation of a solid state drive (SSD). SSDs are a non-volatile memory storage device that competes with hard disk drives. SSDs rely on flash memory, a type of non-volatile memory that is electrically erased and programmed. The appeal of SSDs lies in the fact that they allow a fast, reliable, and durable memory storage device. The goal of this project is to have a working external SSD built from scratch.

Remote Cable Gantry, Allen L. Bailey

Electrical Engineering

The Remote Cable Gantry is a robotic system that was initially intended to aid in the art of aerial videography. It was designed to enable novice and expert users alike to capture both video footage and audio from perspectives unachievable by current methods. This system uses a series of cables to control the position of a camera gimbal in a defined 3D space and, as a self-contained unit, is portable and easy to use. The Remote Cable Gantry offers a quiet, intuitive, and safe alternative to existing technology, which has been limiting the market and potential of aerial photography and …

Music Synthesizer Senior Project: Danalog, Vikrant A. Marathe

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens. The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Formula Sae Power Distribution Controller, Daniel Baron

Electrical Engineering

The Power Distribution Controller senior project aims to replace the current Power Distribution Module (PDM) on Cal Poly’s Formula SAE internal combustion vehicle with a more advanced, configurable, and reliable system. The Power Distribution Controller is a MOSFET based system that can be controlled through either controller area network or a parallel interface to distribute and control power from the vehicle’s battery to the several electrical devices on the car. The Power Distribution Controller also collects output voltage and current data, and communicates this data to the vehicle’s data logger. This will allow engineers to troubleshoot electrical problems on the …

Water Leak Detection System, Ryan T. Hanson

Electrical Engineering

The water supply shortage has increased in recent years due to overpopulation, climate change and obsolete water facilities, where deteriorated pipes cause most of the water leaks. The problem is not the size of the leak, but the time it takes to detect it. This paper presents the implementation of a system installed in the hydraulic facilities of a residence, to detect water leaks. The system consists of a water sensor installed by a water reservoir of interest, a microprocessor to interpret the data and evaluate whether it is a water leak or not, an SMS alert message, and an …

Danalog: Digital Music Synthesizer, Evan R. Lew

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens.

The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Auxiliary Power System, Karianne Laplante, Nidia Vara, Eve Wassenaar, Carter Whittington

Electrical Engineering

The main objective for this project is to design and build a prototype for an all-electric SUV for the start-up company, Sharpell Technologies. This vehicle will comprise of the following configurations: auxiliary power system (APS), battery management system, battery pack wiring, CAN bus system, DC-DC charging converter, DC/DC auxiliary converter, instrument cluster, and motor controller/inverter. Each car configuration is a project assigned to a 2-4 student team; in total, eight EE senior projects and one ME project is produced. New lightweight batteries are also in the process of being developed to provide a viable electric source for the car. A …

Light Sensing Automated Blinds, Andrew B. Hodges, Ryan C. Flick

Electrical Engineering

This project is solving the problem of wasted energy within buildings and homes, because currently the lights turned on inside building do not utilize natural, ambient light from the sun. Rather than having unnecessary light from a light source, the automated light sensing smart blinds can sense the amount of light outside the window and in the room, and then adjust the angle of the blinds to save energy by utilizing the available outdoor light. This way, the light source will not be running at maximum power output while there is excess light coming through the window. This project aims …