Digital Commons Network^™

Effects Of Varying Doses Of Oral Bisphenol A Consumption On Type 2 Diabetes Risk Markers In Healthy Adults, Todd Hagobian, Alyssa Bird, Sean Stanelle, Dana Williams, Andrew Schaffner, Suzanne Phelan

Kinesiology and Public Health

Objective

To determine the effects of varying doses of orally administered BPA on indices of glucose metabolism.

Methods

Eleven college students (21.0 ± 0.8 years; 24.2 ± 3.9 kg/m²) were randomized in a double-blinded, crossover fashion separated by >1 week to placebo (PL), deuterated BPA at 4 µg/kg body weight (BPA-4), and deuterated BPA at 50 µg/kg body weight (BPA-50). Total BPA, glucose, insulin, and C-peptide were assessed at baseline, minutes 15, 30, 45, 60, and every 30 minutes for 2 hours in response to a glucose tolerance test.

Results

There was a significant condition × time interaction …

Feeling Green: The Benefits Of Green Space On Urbanites' Mental Health, Kathryn A. Hoagland

Liberal Arts and Engineering Studies

This investigation intends to determine the best methods for incorporating public green space into dense urban areas, for the betterment of residents' mental health. Data from studies showing differences in the prevalence of anxiety and depression in urban and rural areas are discussed alongside data from studies looking at the effect that certain types of green space might have on mental health. While there is no exact consensus on the extent to which nature has positive effects on mental health there is enough of a correlation to argue for the implementation of public green spaces in urban design, in order …

Torsional Stiffness Of A Race Car, Reiley A. Schraeger, Cameron Kao, Raymond Deng, Omar Roman

Mechanical Engineering

Torsional stiffness plays a major role in any road vehicle. To understand torsional stiffness of a vehicle and make future iterations and improvements, a proper torsional stiffness jig is required to prove accurate and useful data. This report encompasses the new and improved testing jig and potential improvement ideas for more accurate results. With real data result relating to FEA calculations, designers can be confident in the FEA changes to torsional stiffness is accurate and will yield the probably results they desired. This report shows the methodology, manufacturing process and testing procedure to use on any Baja or SAE vehicle …

Cal Poly Supermileage Electric Vehicle Drivetrain And Motor Control Design, Clarisa Joy Howe, Christopher Joseph Mclaughlin, Erik Alvarado, Enyi Liang

Mechanical Engineering

The Cal Poly Supermileage Vehicle team is a multidisciplinary club that designs and builds high efficiency vehicles to compete internationally at Shell Eco-Marathon (SEM). Cal Poly Supermileage Club has been competing in the internal combustion engine (ICE) category of the competition since 2007. The club has decided it is time to expand their competition goals and enter their first battery electric prototype vehicle. To this end, a yearlong senior design project was presented to this team of engineers giving us the opportunity to design an electric powertrain with a custom motor controller. This system has been integrated into Ventus, the …

Experimental Study And Modeling Of The Gm-I Dependence Of Long-Channel Mosfets, Michael Fong Cheng

Master's Theses

This thesis describes an experimental study and modeling of the current-transconductance dependence of the ALD1106, ALD1107, and CD4007 arrays. The study tests the hypothesis that the I-gm dependence of these 7.8 µm to 10 µm MOSFETs conforms to the Advanced Compact Model (ACM). Results from performed measurements, however, do not support this expectation. Despite the relatively large length, both ALD1106 and ALD1107 show sufficiently pronounced ‘short-channel’ effects to render the ACM inadequate. As a byproduct of this effort, we confirmed the modified ACM equation. With an m factor of approximately 0.6, it captures the I-gm dependence with sub-28% maximum error …

Perturbation Based Decomposition Of Semg Signals, Rachel Huettinger

Master's Theses

Surface electromyography records the motor unit action potential signals in the vicinity of the electrode to reveal information on muscle activation. Decomposition of sEMG signals for characterization of constituent motor unit action potentials in terms of amplitude and firing times is useful for clinical research as well as diagnosis of neurological disorders. Successful decomposition of sEMG signals would allow for pertinent motor unit action potential information to be acquired without discomfort to the subject or the need for a well-trained operator (compared with intramuscular EMG). To determine amplitudes and firing times for motor unit action potentials in an sEMG recording, …

Experimental Optical Pulse Picker For Lawrence Livermore National Lab, Alexander Thomas Wargo

Master's Theses

Proprietary.

Development Of A Myoelectric Detection Circuit Platform For Computer Interface Applications, Nickolas Andrew Butler

Master's Theses

Personal computers and portable electronics continue to rapidly advance and integrate into our lives as tools that facilitate efficient communication and interaction with the outside world. Now with a multitude of different devices available, personal computers are accessible to a wider audience than ever before. To continue to expand and reach new users, novel user interface technologies have been developed, such as touch input and gyroscopic motion, in which enhanced control fidelity can be achieved. For users with limited-to-no use of their hands, or for those who seek additional means to intuitively use and command a computer, novel sensory systems …

Exploring The Impact Of National Culture On Logistics Performance, Deepak Parathur Kesavan

Master's Theses

The increased logistics complexity due to supply chain globalization requires a deeper understanding of a country’s logistics performance. This performance is usually captured through infrastructure, services and procedure elements and understood in operational and economical terms. This thesis adds a social view to understand logistics performance variation across countries through focusing on their national culture dimensions. Using secondary data from the international Logistics Performance Index (LPI) report as well as the scores from Hofstede’s national culture dimension surveys, the impact of national culture on logistics performance was explored. Statistical results showed Power Distance and Uncertainty Avoidance dimensions were found to …

A Study Of Face Embedding In Face Recognition, Khanh Duc Le

Master's Theses

Face Recognition has been a long-standing topic in computer vision and pattern recognition field because of its wide and important applications in our daily lives such as surveillance system, access control, and so on. The current modern face recognition model, which keeps only a couple of images per person in the database, can now recognize a face with high accuracy. Moreover, the model does not need to be retrained every time a new person is added to the database.

By using the face dataset from Digital Democracy, the thesis will explore the capability of this model by comparing it with …

Sweep And Taper Analysis Of Surfboard Fins Using Computational Fluid Dynamics, Brandon James Baldovin

Master's Theses

The research presented here provides a basis for understanding the hydrodynamics of surfboard fin geometries. While there have been select studies on fins there has been little correlation to the shape of the fin and its corresponding hydrodynamic performance. This research analyzes how changing the planform shape of a surfboard fin effects its performance and flow field. This was done by isolating the taper and sweep distribution of a baseline geometry and varying each parameter individually whilst maintaining a constant span and surface area. The baseline surfboard fin was used as a template in Matlab to generate a set of …

Wastewater Treatment And Nitrogen Removal In Bench-Scale Photobioreactors Operated With Solids Recycling, Erik Hoffnagle

Master's Theses

This thesis examines the effect of solids recycling on nitrification, organic carbon removal, and algal-bacterial productivity in bench-scale photobioreactors (PBRs) simulating winter pond conditions in San Luis Obispo, California and a 6-acre raceway system in Delhi, California. Two sets of duplicate photobioreactors operated with or without solids recycling were fed primary clarifier effluent (1^oEff) for the first experiment, and facultative pond effluent (FAC) for the second experiment.

In both experiments mean productivity was lower in solids recycled PBRs (3.67 and 2.3 g/m²-day), than in controls without solids recycling (4.15 and 3.9 g/m²-day). When fed …

Design Of A Low-Cost Data Acquisition System For Rotordynamic Data Collection, Gregory S. Pellegrino

Master's Theses

A data acquisition system (DAQ) was designed based on the use of a STM32 microcontroller. Its purpose is to provide a transparent and low-cost alternative to commercially available DAQs, providing educators a means to teach students about the process through which data are collected as well as the uses of collected data. The DAQ was designed to collect data from rotating machinery spinning at a speed up to 10,000 RPM and send this data to a computer through a USB 2.0 full-speed connection. Multitasking code was written for the DAQ to allow for data to be simultaneously collected and transferred …

Strawberry Detection Under Various Harvestation Stages, Yavisht Fitter

Master's Theses

This paper analyzes three techniques attempting to detect strawberries at various stages in its growth cycle. Histogram of Oriented Gradients (HOG), Local Binary Patterns (LBP) and Convolutional Neural Networks (CNN) were implemented on a limited custom-built dataset. The methodologies were compared in terms of accuracy and computational efficiency. Computational efficiency is defined in terms of image resolution as testing on a smaller dimensional image is much quicker than larger dimensions. The CNN based implementation obtained the best results with an 88% accuracy at the highest level of efficiency as well (600x800). LBP generated moderate results with a 74% detection accuracy …

Supported Programming For Beginning Developers, Andrew Gilbert

Master's Theses

Testing code is important, but writing test cases can be time consuming, particularly for beginning programmers who are already struggling to write an implementation. We present TestBuilder, a system for test case generation which uses an SMT solver to generate inputs to reach specified lines in a function, and asks the user what the expected outputs would be for those inputs. The resulting test cases check the correctness of the output, rather than merely ensuring the code does not crash. Further, by querying the user for expectations, TestBuilder encourages the programmer to think about what their code ought to do, …

Agn Photoionization Of Gas In Companion Galaxies As A Probe Of Agn Radiation In Time And Direction, William C. Keel, Vardha Nicola Bennert, Anna Pancoast, Chelsea E. Harris, Anna Nierenberg, S. Drew Chojnowski, Alexei V. Moiseev, Dmitry V. Oparin, Chris J. Lintott, Kevin Schawinski, Graham Mitchell, Claude Cornen

Physics

We consider active galactic nucleus (AGN) photoionization of gas in companion galaxies (cross-ionization) as a way to sample the intensity of AGN radiation in both direction and time, independent of the gas properties of the AGN host galaxies. From an initial set of 212 AGN+companion systems, identified with the help of Galaxy Zoo participants, we obtained long-slit optical spectra of 32 pairs that were a priori likely to show cross-ionization based on projected separation or angular extent of the companion. From emission-line ratios, 10 of these systems are candidates for cross-ionization, roughly the fraction expected if most AGNs have ionization …

Hands-Free Ultrasound Transducer Attachment, Christina Harrison, Glenn Farina, Harshveer Dhaliwal

Biomedical Engineering

This document describes a background on current ultrasound technologies and the troubles that have inspired the need for a hands-free ultrasound transducer device, as well as the regulatory requirements, like patents and standard codes, for the intended invention. It also explains the Stage Gate Review process used to project plan the design of the device, a description of the final design and how it was developed, and the IQ/OQ/PQ. The objectives necessary to design this device, in order to meet all the requirements of the sponsor, are also summarized here. The design process including manufacturing instructions, prototype evolution, and the …

Foot Support Taping Device For Off-Loading Wounds, Andres Fojaco Gomez, Mikaela Williams, Josh Pelegrin

Biomedical Engineering

No abstract provided.

Automated Microscope Stage, Corin Nishimoto, Alison Flesch, Theo Anastos

Biomedical Engineering

This document seeks to describe the background information, customer requirements, design specifications, indications for use, selected materials, proposed budget, prototypes, final design, manufacturing processes, and testing methods regarding the CellOptimizer automated microscope stage product.

Slit Lamp Ophthalmoscope Redesign, Michael Hostetler, Austin Mattmiller, Alexis Brewer

Biomedical Engineering

The slit lamp ophthalmoscope is used by ophthalmologists for diagnosis of pathologies in the eye. The device is used for identifying ocular diseases or indications of other possible systemic diseases to treat them before the diseases progress. Redesign of the ergonomics and adjustment mechanisms of the slit lamp ophthalmoscope will attempt to improve the compatibility of the device across a greater variety of patients. The wider headrest tower of 12.75 inches, the wider table cutout of 12 inches, and the 12 inches of extension of the headrest tower creates a better ergonomic fit for the patient and doctor. The wider …

Ideomotion Gait Training Thigh Prompt, Kristin Schmidt, Elizabeth Peterson, Dalton Jennings

Biomedical Engineering

This document serves as our project report at its completion for developing thigh prompts to be used with the LiftWalker. In this document we outline our project from its beginning to end. We describe our process from understanding the background and our customer requirements, transforming these customer requirements into engineering specifications, performing the stage gate process, developing and evolving the design, testing the design, and finally drawing conclusions and making recommendations for the future.

Insight To An Asbestos Laborer, Eduardo Delgadillo

Construction Management

Asbestos laborers are often overlooked and not cared for much in construction projects. While they are often forgotten in the construction industry, they play a big role in most remodels or demolition projects. Abatement workers are exposed to the dangers of asbestos on a daily basis. Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) are the federal agencies that regulate asbestos. The EPA regulates the use, transportation and disposal of asbestos, while OSHA sets the standards for work involving asbestos minerals. OSHA has regulations that demolition and/or abatement contractors must comply with since asbestos is considered …

Building Homes And Hopes In Bangalore, India, Sherry S. Saroufeem

Construction Management

Habitat for Humanity Global Village is an organization that continuously sends volunteers to work on construction projects around the world. My team and I were chosen to go to a village in Bangalore, India, where we dug and poured home foundations for three families in need. Given the opportunity to combine my love for construction and my passion for helping those in need, I was certain that this was the senior project for me. I wanted the capstone of my college educational experience to reflect a hands-on approach, where I had the opportunity to make a difference and see an …

The Skills Students Coming Out Of Cal Poly San Luis Obispo Lack To Become Effective Superintendents, Armando Pulido-Melendrez

Construction Management

The construction superintendent plays a very important role throughout the construction process in order to deliver a successful project. This paper analyzes the skills Cal Poly SLO graduates lack to become effective superintendents. It does so by first analyzing quantitative research on papers that state which skills are important. Several interviews were conducted with professionals in the construction industry. These interviews provided input regarding what makes an effective superintendent. From this research, an effective superintendent must have an understanding of scheduling and sequencing of construction processes. Additionally, they must have the strength and stamina for construction supervision in the field …

Aei Student Design Competition: Value Engineering & Design Build, Vincenzo Paolo Guidi

Construction Management

The Architectural Engineering Institute puts on a yearly student design competition that features interdisciplinary teams from colleges across the country. The project for the competition was the Jack H. Miller Center for Musical and Performing Arts on the Hope College campus in Holland Michigan. The main challenges in the problem statement address acoustics, using mass timber, and add alternative roof top space. Through a collaborative process, our team created a proposal that addressed the challenges and why we were the best fit for the job. I worked with a fellow construction management student, Shannon Wheeler, to produce our portion of …

As-872-19 Resolution On University Faculty Personnel Policies Chapter 5: Evaluation Processes, Academic Senate Faculty Affairs Committee

Academic Senate Resolutions

AS-859-18 resolved that “The Academic Senate Faculty Affairs Committee construct UFPP by proposing university-level faculty personnel policies to the Senate in the form of chapters or portions of chapters of UFPP according to the procedures approved in AS-829-17”; and AS-859-18 resolved that “By the end of Spring 2020 Colleges and other faculty units reorganize their faculty personnel policy documents to conform their documents to the chapter structure of UFPP”; therefore be it the policy document contained at the end of the attached report “Proposed Chapter of University Faculty Personnel Policies Document: CHAPTER 5: EVALUATION PROCESSES” be established as Chapter 5: …

As-874-19 Resolution On University Faculty Personnel Policies Chapter 6: Evaluation Cycle Patterns, Academic Senate Faculty Affairs Committee

Academic Senate Resolutions

AS-859-18 resolved that “The Academic Senate Faculty Affairs Committee construct UFPP by proposing university-level faculty personnel policies to the Senate in the form of chapters or portions of chapters of UFPP according to the procedures approved in AS-829-17”; and AS-859-18 resolved that “By the end of Spring 2020 Colleges and other faculty units reorganize their faculty personnel policy documents to conform their documents to the chapter structure of UFPP”; therefore be it the policy document contained at the end of the attached report “Proposed Chapter of University Faculty Personnel Policies Document: CHAPTER 6: EVALUATION CYCLE PATTERNS” be established as Chapter …

Executive Committee - Agenda, 2/26/19, Academic Senate

Academic Senate Agendas

No abstract provided.

As-871-19 Resolution On Supporting Library Collections Necessary For Faculty And Student Success, Academic Senate Faculty Affairs Committee

Academic Senate Resolutions

In January 2019, the Academic Senate of the California State University, unanimously passed resolution (AS-3351-18/FGA/AA (Rev)), calling on the Chancellor’s Office to increase funding for the ECC to address rising costs and continue to reap the advantages of collective purchasing power; therefore be it that the Academic Senate of Cal Poly affirm its support of the resolution passed by the Academic Senate of the California State University, calling on the Chancellor’s Office to increase funding for the ECC; and be it further that the Dean of Library Services* be invited to address the Academic Senate annually to provide a report …

Executive Committee - Meeting Minutes, 2/26/2019, Academic Senate

Academic Senate Minutes

No abstract provided.