Digital Commons Network^™

How State Legislators Can Use The Media To Affect Policy Change In State Government Agencies: A Case Study With The Department Of Motor Vehicles, Alisha Gallon

Journalism

This study was done to understand how a member of the state legislature used the media to effect policy change. This subject is discussed using the California Department of Motor Vehicles as a case study. There is a long-standing and well-understood relationship between legislators and the media. It is common knowledge that legislators in the minority party use the media to pressure members of the majority party. Research shows those in the minority benefit from this kind of coverage. However previous studies are mostly silent about whether using the media to pressure the party in control of the government actually …

Skyview Los Alamos Winemaker Pool Party Series 2019: Brand Reputation And Relationship Building Through Special Events, Jessica A. Mclin

Journalism

The following study was performed to determine the effect of planned special events on brand reputation and how they can be used as a tool for relationship building. There is a focus on outlining goals within an organization and identifying key publics that will assist in reaching said goals. The campaign’s focus was to create and publicize a Rosé Pool Party series, an opportunity for the newly reopened Skyview Hotel in Los Alamos, CA to work with and promote the surrounding business community. With scholarly research, the design of the campaign attempts to strategize event marketing to benefit the organization …

Redesign Of Cubesat For Beam Charging, Kuba Preis

Industrial and Manufacturing Engineering

This paper is intended to be a study in the applications of the design freedom granted by additive manufacture in the design of a 1U CubeSat frame. The main loads experienced by a CubeSat are structural (during launch) and thermal (solar radiation). Beam charging is an emerging technology which involves charging a CubeSat using a laser beam. In this paper, a CubeSat frame was redesigned to account for the structural loads induced during launch and the thermal loads induced when beam charging. The thermal, weight, design, and structural requirements for a new CubeSat design were derived. The 1U CubeSat frame …

Fire And Life Safety Analysis: Building 171a – Poly Canyon Village, Delaney Seeburger

Fire Protection Engineering: Culminating Experience Project Reports

A fire and life safety analysis was performed in fulfillment of one of the requirements for the Master of Science Degree in Fire Protection Engineering from California Polytechnic State University San Luis Obispo (Cal Poly). The analysis consisted of a prescriptive and a performance-based analysis. These analyses were performed on Building 171A which is part of the Cal Poly San Luis Obispo campus. The prescriptive analysis consisted of four distinct areas of focus: 1) Structural Fire Protection, 2) Water-Based Suppression Systems, 3) Fire Alarm and Detection Systems, 4) Egress Analysis and Design Prescriptive analyses are performed to determine whether a …

Redefining The Engineer: An Examination On Engineering Culture And The Impact On Underrepresented Students At Cal Poly, Danica Liang

Liberal Arts and Engineering Studies

This project is centered around examining what engineering culture is like at Cal Poly and how it may produce contrasting experiences and perceptions for underrepresented engineering students, and more specifically, for women and people of color. By gathering data through a survey and listening to personal narratives from student interviews, I hope to combine data and storytelling elements to create a compelling data journalism and visualization project.

Commercial Vehicle Research Buggy For Active Driver Assistance Systems, Fernando Mondragon-Cardenas, Nathaniel Mccutcheon Furbeyre, Ricardo Steven Lickiss Tan Iv

Mechanical Engineering

This is the Final Design Report for Daimtronics, a senior project team sponsored by Professor Charles Birdsong of Cal Poly and by Daimler Trucks North America. This team integrated mechatronic systems into a scale semi-truck chassis using existing mechanical and software systems from three separate Cal Poly senior projects over the recent years: Daimscale, MicroLaren, and ProgreSSIV. The goal was to have a user-friendly platform capable of executing autonomous driving algorithms that are programmable at a high level in Simulink and Robotic Operating System (ROS). Advanced driver assistance and autonomous vehicle algorithms were not within the scope of this project, …

Gravity Drip Irrigation System, Ryan C. Waldron, Cole R. Presson, Josh L. Plaskett

Mechanical Engineering

A gravity-fed, drip irrigation system prototype has been developed for use in raised garden beds and other small-scale crop irrigation applications. The original developer of the prototype and sponsor of the project, Tina Creel, is seeking to refine it into a functional consumer product through the implementation of technical engineering and standard manufacturing processes. The scope of the project includes the tank support system and supply of water to the sponsors current piping subsystem. It does not include any modifications to the bed, piping system or water tank itself. The target specifications of the system include its load capacity, dimensions, …

Human Powered Vehicle Trainer, Nicholas Hung Nguyen, Gregory Reece Bridges, Jacinta Garcia, Mitchell Sidney Smith

Mechanical Engineering

This Final Design Review (FDR) document describes the final design and completed prototype of a Mechanical Engineering senior project team at California Polytechnic State University, San Luis Obispo. The project goal is to create an adjustable human powered vehicle training bike for George Leone that allows a rider to gain confidence with the unique reclined bike geometry ahead of the World Human Powered Speed Challenge at Battle Mountain, Nevada. This document outlines the customer’s needs and technical research performed which together determine the project’s scope and engineering specifications. Next, we present the initial idea generation process and its results, along …

Adaptive Paddle Board, Alexander Holthaus, Alexander Holthaus, Garrett Holmes, Garett Jones

Mechanical Engineering

This Final Design Review (FDR) document outlines the Adaptive Paddle Board senior project, done by four Mechanical Engineering Students at California Polytechnic State University and provides detail on the project and what the team has accomplished. The goal was to create a universally adaptive paddle board that can be used by the Central California Adaptive Sports Center for a wide range of persons with disabilities. This document highlights current research from patents and existing products, details regarding customer specifications, results from concept generation, the manufacturing and testing that went into the final design, and the process taken to get there. …

Uav Catapult, Sean Drew Huxley, Benjamin Richard Lacasse, David Matthew Garcia, Jordan Joseph Cearns

Mechanical Engineering

This document outlines the Senior Design Project proposed by Dr. Aaron Drake that was assigned to a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The purpose of this project was to design, build, test, and finalize a launching system for two small, fixed wing, unmanned aerial vehicles (UAVs) owned by Dr. Drake and Cal Poly. The goal was to create a system that was both portable and reliable to use, only requiring a two-person team to use effectively in the field. The most important design requirements were determined to be the launch speed, assembly …

Retaining Ring Material Wear Analysis And Testing, Thomas Headland, Barten Hansen, Austin Fisher, Kevin Hurtado

Mechanical Engineering

The chemical mechanical planarization (CMP) of wafers for integrated circuits is an essential – yet expensive – step in their manufacture. CMP machine down-time due to the replacement of process consumables, such as wafer retaining rings, is a significant contributor to the process cost. To reduce the operational cost of their CMP machines, Revasum is interested in exploring new designs and materials for wafer retaining rings to increase their operational lifetime. Background research showed that there is currently no suitable method for testing new retaining ring designs and materials for wear characteristics specific to the CMP process. Available wear testing …

A Framework For Bim Model-Based Construction Cost Estimation, Michael Clark

Master's Theses

This thesis presents a framework to conduct a quantity take-off (QTO) and cost estimate within the Building Information Modeling (BIM) Environment. The product of this framework is a model-based cost estimating tool. The framework addresses the cost uncertainty associated with the detailed information defining BIM model element properties. This cost uncertainty is due to the lack of available tools that address detailed QTO and cost estimation using solely a BIM platform. In addition, cost estimators have little experience in leveraging and managing information within semantic-rich BIM models. Unmanaged BIM element parameters are considered a source of uncertainty in a model-based …

The Performance Cost Of Security, Lucy R. Bowen

Master's Theses

Historically, performance has been the most important feature when optimizing computer hardware. Modern processors are so highly optimized that every cycle of computation time matters. However, this practice of optimizing for performance at all costs has been called into question by new microarchitectural attacks, e.g. Meltdown and Spectre. Microarchitectural attacks exploit the effects of microarchitectural components or optimizations in order to leak data to an attacker. These attacks have caused processor manufacturers to introduce performance impacting mitigations in both software and silicon.

To investigate the performance impact of the various mitigations, a test suite of forty-seven different tests was created. …

Effects Of Barotrauma On Four Species Of Pacific Rockfishes (Sebastes Spp.), Lesley Salter

Master's Theses

Physoclistic fish, such as Pacific rockfishes (genus Sebastes), have closed swim bladders that help them regulate their buoyancy. When anglers catch these fish and reel them to the surface, gases within their swim bladder expand due to the decrease in pressure. This can cause their swim bladder to over inflate––a condition known as barotrauma. Overly buoyant fish experiencing barotrauma often struggle to swim back to dwelling depth if released at the ocean’s surface. These fish may experience high rates of mortality by thermal shock caused by the warmer surface temperatures, starvation, predation, or vision problems caused by barotrauma. Assisted …

Robot Navigation In Cluttered Environments With Deep Reinforcement Learning, Ryan Weideman

Master's Theses

The application of robotics in cluttered and dynamic environments provides a wealth of challenges. This thesis proposes a deep reinforcement learning based system that determines collision free navigation robot velocities directly from a sequence of depth images and a desired direction of travel. The system is designed such that a real robot could be placed in an unmapped, cluttered environment and be able to navigate in a desired direction with no prior knowledge. Deep Q-learning, coupled with the innovations of double Q-learning and dueling Q-networks, is applied. Two modifications of this architecture are presented to incorporate direction heading information that …

Viewpoint Optimization For Autonomous Strawberry Harvesting With Deep Reinforcement Learning, Jonathon J. Sather

Master's Theses

Autonomous harvesting may provide a viable solution to mounting labor pressures in the United States' strawberry industry. However, due to bottlenecks in machine perception and economic viability, a profitable and commercially adopted strawberry harvesting system remains elusive. In this research, we explore the feasibility of using deep reinforcement learning to overcome these bottlenecks and develop a practical algorithm to address the sub-objective of viewpoint optimization, or the development of a control policy to direct a camera to favorable vantage points for autonomous harvesting. We evaluate the algorithm's performance in a custom, open-source simulated environment and observe affirmative results. Our trained …

Stationary Exercise Bicycle Instrumentation And Verification Of Opensim Pelvic Residual Loads In Seated Cycling, Bradley Robert Wash

Master's Theses

The study of cycling biomechanics typically requires measurement of pedal loads through force transducer instrumentation. However, analysis of seated cycling often necessitates the additional measurement of the loads exerted on the rider by the seat and handlebars. A stationary exercise bicycle was instrumented with two commercial six-axis force transducers at both the seat and handlebar locations via a custom designed mounting system. The system was tested by applying known forces and moments to the fixtures and proved capable of accurately measuring the loads. Additional data collected from cycling tests were compared to values from the literature to add supporting evidence …

Modeling Sensible Heat Driven Direct Contact Membrane Distillation Treatment Of Oilfield Produced Water, Tyler Gregory Dery

Master's Theses

A model was developed for predicting the performance of direct contact membrane distillation (DCMD) to evaluate the feasibility of using sensible heat to drive DCMD treatment of oilfield produced water. Algorithms for performance prediction of instantaneous and counter-current DCMD flow were developed. These algorithms used equation-based models of heat transfer, mass transfer, concentration polarization, and counter-current flow to predict performance of DCMD systems. The performance prediction model was validated against experimental data from the literature, and limitations to the accuracy of predictions were identified. The model was applied to evaluate performance sensitivity to nine operational parameters. The model was applied …

Evaluating Projections And Developing Projection Models For Daily Fantasy Basketball, Eric C. Evangelista

Master's Theses

Daily fantasy sports (DFS) has grown in popularity with millions of participants throughout the world. However, studies have shown that most profits from DFS contests are won by only a small percentage of players. This thesis addresses the challenges faced by DFS participants by evaluating sources that provide player projections for NBA DFS contests and by developing machine learning models that produce competitive player projections.

External sources are evaluated by constructing daily lineups based on the projections offered and evaluating those lineups in the context of all potential lineups, as well as those submitted by participants in competitive FanDuel DFS …

A Case Study Examining The Structure Of The Event Process At California Polytechnic State University, Ryan R. Baker

Master's Theses

The purpose of this study was to examine the structure of the event process on Cal Poly’s campus. An intrinsic case study method was used, and data were collected and analyzed using triangulation from three sources of information: documents, interviews, and participation research. Overall, the structure of the event management process on campus was found to be stable, but could use improvement. Cal Poly should consider establishing a specific, designated organization that would help centralize the event management process at Cal Poly. This organization could be in charge of training and updating event managers, approving events, monitoring volume of events …

Field Emissions Of Methane And Nitrous Oxide From California Landfills, Alexandra D. Limpert

Master's Theses

Comprehensive and systematic aerial and field investigations were conducted at representative California landfills to quantify emissions of methane and nitrous oxide. Landfills are highly engineered; however, they are one of the largest anthropogenic sources of greenhouse gases, causing human health and safety concerns. Methane (CH₄) and nitrous oxide (N₂O) are significant greenhouse gases with high global warming potentials that are generated in a landfill environment.

For site selection, sites were evaluated based on waste in place, climate zone, faults and oil and gas operations, population density, cover conditions and percentage of cover types, age of waste, …

The Effects Of Weld Thermal Cycles On Additively Manufactured 316l Stainless Steel, Hajime Yamanaka

Master's Theses

To address the size limitation of the powder bed fusion system in additive manufacturing, the welding properties of 316L stainless steel manufactured by SLM 125HL are investigated by conducting hot ductility test and nil strength temperature (NST) test with a physical thermal mechanical simulator, Gleeble. In this study, the print orientations (Zdirection and XY-direction) and the laser patterns (stripe and checker board) are studied. In NST test, the orientation showed a statistical significance in NST: Z-direction was 1384°C and XY-direction was 1400°C. In hot ductility test, all of ductility curves show similar behaviors: hardening region, recrystallization region, and liquation region. …

A Cubesat Orbital Test Platform For An Electrothermal Plasma Micro-Thruster, Sean L. Crowley

Master's Theses

As the viability and capability of CubeSats increases, a demand for propulsion systems is becoming apparent. The limitations put forth in the ``CubeSat Design Specifications" and the additional difficulties of low available Size, Weight and Power (SWaP) for propulsion systems aboard CubeSats have left a technological gap that many are trying to fill. One class of propulsion, micro-propulsion systems, fills this gap nicely as they generally have low size and weight with a reasonable amount of power draw. Many can function for reasonable lifetime scales utilizing pressure vessels under one atmosphere and less then 100 watt-hours of stored chemical energy …

Fifth Aeon – A.I Competition And Balancer, William M. Ritson

Master's Theses

Collectible Card Games (CCG) are one of the most popular types of games in both digital and physical space. Despite their popularity, there is a great deal of room for exploration into the application of artificial intelligence in order to enhance CCG gameplay and development. This paper presents Fifth Aeon a novel and open source CCG built to run in browsers and two A.I applications built upon Fifth Aeon. The first application is an artificial intelligence competition run on the Fifth Aeon game. The second is an automatic balancing system capable of helping a designer create new cards that do …

Study Of Paper Microbial Fuel Cells For Use In On-Site Wastewater Testing, William A. Tolmasoff

Master's Theses

This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the …

The Effects Of Agricultural Waste-Based Compost Amendments In Organic Pest Management, Gregg T. Stephenson

Master's Theses

Soil-borne pests and pathogens, such as Verticillium dahliae, can devastate a wide range of annual and perennial crops. Current management options for organic production are limited and sustainable management of pathogens, weeds, and arthropods is important for staying profitable and reducing the use of harmful chemicals. Organic soil amendments play an important role in supplying some of the nutritional needs of vegetable crops and improving soil structure, while also contributing to pest control. The objective of this research was to determine the effects of grape and olive-based composts on soil pathogen load, arthropod communities, and weed biomass and diversity. …

Analysis Of The Effects Of Adaptive Ramp Metering On Measures Of Efficiency With A Proposed Framework For Safety Evaluation, Jacky Loh

Master's Theses

Adaptive ramp metering (ARM) is a widely popular intelligent transportation system (ITS) tool that boasts the ability to reduce congestion and streamline traffic flow during peak hour periods while maintaining a lower implementation cost than traditional methods such as freeway widening. This thesis explores the effectiveness of ARM implementation on an 18 mile segment of the Interstate 80 (I-80) corridor in the Bay Area residing in northern California. Smaller segments of this particular segment were analyzed to determine the effective length of ARM on efficiency at various lengths originating from a known bottleneck location. Efficiency values were also compared against …

Effects Of Corrugations On Stiffness Properties Of Composite Beams For Structural Applications, Jane Xiao

Master's Theses

Composites have high strength-to-weight ratios, which is particularly desired for applications with weight restrictions. Common composite materials such as carbon fiber reinforced plastic (CF) and fiber glass reinforced plastic (FG) were used in this research. While composite materials possess high stiffness and strength properties, the stiffness of composite laminates may be maximized by changing the geometry. By adding corrugations, the flexural stiffness is increased in one direction compared to the stiffness of a flat part with the same amount of material. Thus, stiffness increases without a change in weight. The primary goal of this research was to investigate the stiffness …

Atomic Oxygen Effects On Particulate Contamination And Short Beam Strength Of Carbon Composites, Marlee K. Litzinger

Master's Theses

In order to design a successful space system, the unique challenges of the space environment it will operate in must be considered during the design process. Atomic oxygen (AO) is a detrimental environmental effect found in Low Earth Orbit (LEO) that affects spacecraft surfaces by oxidizing and eroding material over time, particularly polymers. Carbon fiber/epoxy composites are a commonly used spacecraft material affected by AO exposure. Carbon composites are used as a structural material, such as on solar panels; their large surface area therefore is a potential contamination source to sensitive components. The Space Environments and Testing Lab at California …

Carbonate Chemistry Characterization In A Low-Inflow Estuary With Recent Seagrass Loss, Jolie Higgins

Master's Theses

Estuaries are dynamic environments that are strongly affected by natural variability, as well as direct and indirect anthropogenic impacts. A better understanding of the drivers of carbon fluxes and biogeochemical variability in estuarine systems is needed, particularly with the increasing threat of ocean acidification. Morro Bay in Central California is a small nationally protected estuary, with seasonally low freshwater inputs. Since 2007, the bay has experienced a significant loss of native seagrass, Zostera marina, which is an important component of the marine ecosystem. Because seagrass photosynthesis decreases carbon dioxide and increases oxygen in the water column, the loss of seagrass …