Digital Commons Network^™

Lidar At Poly Canyon, An Binh Chuong

Architectural Engineering

Poly Canyon serves as a living laboratory that reflects Cal Poly’s “Learn by Doing” philosophy through a collection of student-designed and student-constructed structures. Among these is Fratessa Tower, a reinforced concrete observation tower distinguished by its tripod support system, cable-suspended observation deck, and steel spiral staircase. The tower’s unconventional geometry and exposed structural system present unique challenges for documentation, making it well suited for evaluating modern reality-capture and modeling techniques.

This project focused on creating an accurate as-built Building Information Model (BIM) of Fratessa Tower using LiDAR-based scanning, field verification, and Autodesk Revit. Point cloud data were processed to reconstruct …

Reinforced Concrete Design Fundamentals, Belen Stephanie Martinez Espinoza, Estevan Jacob Perez

Architectural Engineering

Hispanic workers make up a large and growing portion of the construction workforce in the United States; particularly in California, the percentage of construction workers who are Hispanic is estimated to be about 55% as of 2021 (Elkins). Many of these workers are Spanish-speaking, yet there is still a gap between technical engineering design and what is understood and applied in the field. One major reason for this gap is the lack of clear bilingual resources. To bridge the gap, a 48-page bilingual booklet titled Reinforced Concrete Design Fundamentals (Fundamentos del Diseño de Concreto Reforzado in Spanish) was created. This …

Flexural Behavior And Failure Mode Assessment Of Concrete-Encased Steel Beams Constructed With Experimental Cardboard Formwork, Luke Robert Jones, Drew Takeshi Kawaguchi

Architectural Engineering

This project investigated the flexural behavior of a concrete-encased W8×13 steel beam detailed without conventional longitudinal reinforcement and constructed using an experimental cardboard/Masonite formwork system. A bare steel control specimen and an encased composite specimen were tested under identical loading conditions to evaluate the effects of concrete confinement and welded transverse reinforcement on lateral-torsional buckling behavior. Results showed that the encased specimen remained laterally stable and developed flexural cracking and concrete crushing rather than the lateral-torsional buckling observed in the control beam. The study also demonstrated that the modified cardboard formwork successfully contained the concrete without the seepage failures observed …

Building With Mass Timber. A Comparative Analysis Of Mass Timber Production In The United States And Europe, Polina Slaboff

Architectural Engineering

The construction and building industries are some of the largest contributors to global carbon emissions accounting almost 42% of global emissions according to Architecture 2030 (2026), prompting increased interest in sustainable building materials such as mass timber. This paper investigates mass timber production in the United States and Europe through a comparative analysis of supply chain, vertical integration, manufacturing processes, machinery, and policy differences. Despite the United States’ abundant forest resources and a growing market demand, American mass timber production continues to lag behind Europe due to limited mill operation, limited vertical integration and demand in commodity lumber, production processes, …

Stem Workshops For Pre-K Students, Sofia Berg, Ashlyn Swoboda

Architectural Engineering

This project involved the development and implementation of a four-part structural engineering workshop series for preschool-aged children at the Orfalea Children’s Center at California Polytechnic State University, San Luis Obispo. The workshops were designed to introduce fundamental structural engineering concepts through age-appropriate discussions, demonstrations, and hands-on activities focused on engineering careers, structural shapes, skyscrapers, and bridges. The lessons emphasized concepts such as stability, bracing, structural loading, seismic behavior, and iterative design while encouraging collaboration, creativity, and problem solving.

Throughout the workshop series, students actively participated in discussions, demonstrated enthusiasm for engineering activities, and were able to recall concepts introduced in …

Xenaforms: Reinforcing Kinematic Stability Through Rigid Connections, Katherine G. Thies

Architectural Engineering

XenaForms combine rigid planes and straight lines with the fluidity of structural origami to create beautiful, organic folded plate structures. Unlike many conventional structures, folded plate systems derive their stability from the interaction between connected panels, creating the appearance of a single continuous sheet of material. The XenaForm uses structural origami and triangulation to create stable points at the apex of two non-colinear triangles. While it is mathematically true that no moment needs to be transferred across the seam between panels in order to have a stable structure, allowing some moment capacity greatly helps during construction. Specifically, these stiff connections …

Thousand Hills Pet Resort Deck Design, Kenzie Brown

Architectural Engineering

On-site residential units at Thousand Hills Pet Resort currently lack ADA-compliant access, as entry is limited to small, elevated doorways that are only reachable by stairs. A deck connecting the units and providing accessible ingress and egress was designed for this senior project.

In addition to the ADA requirements, the property is expected to undergo significant redevelopment in the coming years. As a result, the deck design must not only meet accessibility needs but also be adaptable and reusable. The final design is a modular deck structure utilizing a hybrid foundation system that facilitates future relocation of the deck. The …

Design And Construction Of Caed Support Shop Steel Fence On Existing Cmu Wall, Jared Gustavo Martinez, Agustin Dominguez Jimenez

Architectural Engineering

This project involved the design, testing, fabrication, and construction of a new steel fence system for the CAED support shop at California Polytechnic State University, San Luis Obispo. The fence was designed to attach to an existing CMU wall and serve as a future attachment point for a removable shade canopy system. Experimental testing was performed on multiple turnbuckles to establish a conservative design load for the structural design of the fence posts, baseplates, welds, and anchorage connections. In addition to meeting structural requirements, the project incorporated architectural elements inspired by the original fence and surrounding CAED shop environment. The …

Modular House Design Study, Jordan J. P. Smith

Architectural Engineering

The Modular House is a student designed and constructed structure in Poly Canyon. For decades it served as a home for the Canyon’s caretakers who maintained the structures, looked over the Canyon, and helped construct student projects. After being abandoned for a variety of reasons, the structure now currently stands as an open-air pavilion.

This project studies The Modular House as a unique and storied site and proposes a theoretical retrofit to make the structure habitable again. Historical documents, past senior projects, images, and firsthand accounts were reviewed to understand the site’s history and how it changed over time. In …

Tanzania Mbesese Initiative 2026, June Ezzell, Sam Liebman, Noah Beyer, Kate Hamilton, Luke Vollert, Kylee Borgen, Cody Balazs, Meg Mclaughlin

Architectural Engineering

The Tanzania Mbesese Initiative 2026 Senior Project supports a multi-year design-build effort to establish the Same Polytechnic College in Same, Tanzania. This community faces high poverty levels and limited access to higher education, necessitating sustainable infrastructure to support tertiary education. To prepare for the upcoming July phase of construction, an eight-student Architectural Engineering team designed three practical and resilient structures: a Shade Structure, a Water Collection Structure, and a Reusable Scaffolding system. The final design applied structural analysis, modeling, and hand-tool fabrication practice to balance material efficiency with long-term structural durability. The deliverables provide comprehensive construction documentation, complete material takeoffs, …

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Caed Shop Entrance Wall Construction, Mason Neil Mitchell, Benjamin Joseph Rohrer

Architectural Engineering

This project involves the demolition and reconstruction of the CAED Support Shop Wall at Cal Poly, San Luis Obispo. The project was designed as a multidisciplinary project, combining architectural engineering and construction management students who collaborated on the rehabilitation of an existing structure. This project aimed to use “replication” as a means of historical preservation and restoration, specifically in the fabrication of custom CMU members.

Sotto L'Ulivo, Makayley Washburn, Alex Twomey, Juliana Pantoja, Megan Boyle, Mark Tain Lawson

Architectural Engineering

Over the span of six years, four Architectural Engineering senior project teams designed and developed a shade structure adjacent to Engineering West (Building 21) at California Polytechnic State University, San Luis Obispo. Each phase of the project built upon the last, showcasing student work and application of the ARCE curriculum with the help and guidance of Professor Craig Baltimore.

In the fall of 2025, five Architectural Engineering seniors chose to continue this project and complete the construction of the structure and plaza. The Sotto L’Ulivo phase picked up where the last team left off, taking on the construction of the …

Concrete And Masonry Code (Beams), Michael Alexander Simas Rocha

Architectural Engineering

This report only covers the beam design of the code that was written. The end goal of this project is to write code for concrete and masonry following what was taught in the lecture classes. This project is acting as a foundation for the end goal of a program that can compete with SAP2000, ETABS, RISA, and others. One final goal is to have the print out have the look and feel of having been done by hand. While coding; several factors were recorded including time spent coding, debugging, and then to do three problems by hand vs how long …

The Xenaform: Structure Through Geometry, Justin Tobias Mendoza Ocampo, Emily Marie Labrador, Banyan Walker, Paul Minchev, Brayden Sean Kelleher, Ethan Mario Ceccarelli

Architectural Engineering

The XenaForm is a geometry-driven structural system that incorporates complex forms generated from simple rules of stability, inspired by the work of Iannis Xenakis and reworked by Professor Edmond Saliklis. This project investigates how structural stability can be achieved through geometric configurations rather than a reliance upon material strength alone. By utilizing the design principles of trilateration and the interconnection of triangular panels, the XenaForm was constructed in accordance with the rules of the International Association for Shell and Spatial Structures Pavilion Competition. The team generated several design iterations and selected a final design to fabricate and construct, considering affordability, …

2026 Annual V.E.S.T Hackathon: Improving Gender Inclusivity Of Glove Fitting, Makena E. Fix

Construction Management

Safety gloves are an essential part of field personnel's personal protective equipment (PPE). Gloves protect against cuts, burns, chemicals, and other hazards. Properly fitting gloves reduce the risk of injury by enabling the suitable use of task-specific protection. The 2026 Verifying Everyone’s Safety Together (V.E.S.T) Hackathon was hosted to identify ways in which gloves fit workers differently, and evaluated six different glove types, ranging from woven cut rated to firefighting gloves. To understand experiences faced by workers with their PPE, firefighters were interviewed and discussions were held at the Hackathon. The collaborative event brought industry members and students together to …

Skip The Grid: Bringing Power To The Navajo And Hopi Nation, Benjamin R. Narciso

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the program's fifth year. The project's purpose was to improve the quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry partners, …

Evaluation Of Laser Doppler Flowmetry And Transillumination Laser Speckle Contrast Imaging To Measure Blood Flow Change In Ischemia Mouse Hindlimb Models, Simon Park

Master's Theses

Peripheral Artery Disease (PAD), caused by plaque buildup and narrowing of the arteries, reduces blood flow to the extremities. Promoting collateral arteriogenesis can help redirect blood flow. However, simple growth of collaterals may not be enough to reverse PAD. Instead, the ability for the collaterals to vasodilate and control blood flow is important, meaning assessing collateral function is important for the arteriogenesis assesment. Although microscopy techniques can measure vasodilation, contrast limitations in larger vessels such as collaterals make blood flow measurements difficult. Techniques such as ultrasound or magnetic resonance imaging (MRI) can measure blood flow but have limitations with cost …

Burning July, Elisha Lee

Intertidal

No abstract provided.

Tangerine, Owen Stokes

Intertidal

No abstract provided.

Memoir Of A Fruitfly, Arjun Ramanthan

Intertidal

No abstract provided.

When Snow Falls, Thomas Turilli

Intertidal

No abstract provided.

Pill, Evan Doi

Intertidal

No abstract provided.

Awake, Jordan Mendelevitch

Intertidal

No abstract provided.

Bloodbath, Jenna Martello

Intertidal

No abstract provided.

Death: In The Concrete, Tashi Manchip

Intertidal

No abstract provided.

Technically, Maddie Yaghi

Intertidal

No abstract provided.

To Do, Cadence Mcintire

Intertidal

No abstract provided.

Consortia, Jordan Mendelevitch

Intertidal

No abstract provided.

My Bones, E J. C

Intertidal

No abstract provided.