Digital Commons Network^™

Effects Of Irrigation And Nitrogen Management On Yield And Leaching Risk In Organic And Conventional Broccoli Fields, Shane Egerstrom

Master's Theses

Under regulatory pressures to reduce groundwater contamination by nitrate from fertilizer, such as those posed by the Central Coast Regional Water Quality Control Board’s Agricultural Order 4.0, a need exists to better understand interactions between irrigation and nitrogen (N) management. To increase N use efficiency (NUE), growers are encouraged to account for additional sources of N in their management plans, such as irrigation water N and preplant soil N. The availability of these N sources for plant uptake and how it is affected by other management conditions is not yet well documented. We conducted 6 field trials, 3 organic and …

Comparative Analysis And Optimization Of Control Strategies For Single Axis Tracking Solar Arrays On Skewed Topography, Emerson Nicholas

Master's Theses

Photovoltaic solar farms on uneven terrain present consistent challenges to performance optimization. Standard backtracking algorithms can generate potential losses due to interrow shading caused by sloped terrain as well as a lack of plane of array irradiance that can occur even on level ground. The purpose of this thesis is to use the Gold Tree site as a case study to develop and evaluate different solar tracking control strategies. Specifically, it compares the relative performance of fixed, direct tracking, closed-form backtracking, and global optimization strategies. It is done under a two-dimensional, idealized predictive power model of a representative portion of …

Political Inconsistency Detection Across Legislative Speech And Public Communications, Scott M. Pramuk

Master's Theses

Political actors communicate about legislation across multiple contexts, including committee hearings, recorded votes, and public-facing press releases. Differences between these forms of communication can provide useful signals for journalists and researchers seeking to understand how legislators present policy positions to different audiences.

This thesis extends the Digital Democracy Project, a legislative transparency initiative that provides access to California state legislative hearing transcripts, voting records, and related legislative data. Specifically, this work incorporates publicly accessible, legislator-authored news releases into the Digital Democracy Database and develops a pipeline for analyzing legislative communication across multiple sources. The system collects news releases from California …

Effect Of The Stacking Sequence And Number Of Ply Orientation In A Quasi-Isotropic Laminated Plate On In-Plane Shear Modulus And Failure Modes, Ann Larson

Master's Theses

Maximizing the shear modulus and strength, as well as predicting failure mode and location, when designing a stacking sequence of quasi-isotropic carbon fiber laminated plates is essential to predict stability, resistance to deformation, and overall stiffness of the structure. This research investigates the effect of the stacking sequence of quasi-isotropic laminated composite plate materials in accordance with ASTM D5379: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method.

In this research, experimental testing and Finite Element Analysis (FEA) were first used on aluminum to validate the simulation process before applying it to composite materials. The …

Praxsmith: An Actor-Centric Domain Specific Language For Emergent Narratives In Video Games, Jacob C. Kelleran

Master's Theses

The video game industry is rapidly growing, and interest in game development is growing alongside it. Among this growing interest is a desire to include branching and emergent narratives in games. This subject is understood to be difficult, as every possible trajectory within the story creates exponential complexity. Large studios are sometimes able to create convincing implementations, but that is often with hundreds of developers and writers. Over the years, various solutions have been proposed to create frameworks and languages that aim to tackle this problem, with varying degrees of success. Some frameworks attempt this by placing the focus on …

An Evaluation Of Road Network Structure As A Predictor Of Traffic Volume, Colin M. Mcdonald

Master's Theses

This thesis evaluates the relationships between various graph theory metrics and taxi traffic volume for the cities of San Francisco, California and Porto, Portugal. We also evaluate a modified betweenness centrality metric which incorporates the count of distinct origin-destination pairs from the taxi data as the weight function. This thesis extends a paper by Pengyao Ye, Bo Wu, and Wenbo Fan by reducing circularity through a temporal train-test split and by comparing both line-graph and primal-graph formulations of betweenness centrality.

We found that past traffic volume is almost perfectly correlated with future traffic volume and that the modified betweenness centrality …

Multimodal Machine Learning For Soil Burn Severity Mapping Across California Wildfires, Sanjana Checker

Master's Theses

Accurate mapping of soil burn severity (SBS) is critical for post-fire watershed management, erosion risk assessment, and ecological recovery planning, yet traditional field-based approaches remain costly, time-intensive, and spatially limited. This thesis presents a machine learning pipeline for wall-to-wall SBS classification across California wildfires using multi-sensor satellite imagery, terrain derivatives, and bioclimatic covariates. Field-collected SBS observations (n = 2,180) from 52 wildfires occur- ring between 2013 and 2025, sourced from the U.S. Forest Service and CAL FIRE, were used to train and evaluate multiple classification architectures within a Google Earth Engine and Google Cloud-based prediction framework. After upsampling the unburned …

Sustainable Management Of Soilborne Pathogens In Strawberry Production Through Host Resistance And Sanitation Practices, Maria G. Alvarez Arredondo

Master's Theses

Strawberry production in California is significantly impacted by soilborne pathogens that reduce plant productivity and increase management costs. This research addressed management of these pathogens through two independent approaches: evaluation of host resistance in strawberry cultivars and assessment of sanitation practices for reducing pathogen movement between fields.

Macrophomina root rot, caused by Macrophomina phaseolina, was evaluated over two growing seasons (2024–2025 and 2025–2026) using field trials at California Polytechnic State University, San Luis Obispo. In Year 1, disease incidence varied widely among genotypes, with mortality ranging from 1.3% to 88.8% and an average mortality of 26.4%. Area under the …

Electrical Resistivity Tomography Investigation Of Hard Rock Aquifers In The Salinian Block, Roxanne C. Chambers

Physics

Identifying a productive groundwater source in hard rock terrain is often a challenge. Conventional hard rock aquifer models commonly describe a weathering derived layered system consisting of a laminated layer, an underlying fractured zone, and a competent granitic basement. This study investigates the applicability of this conceptual model at Lockshaw Ranch, a granitic site within the Salinian Block of central California located near the Rinconada Fault.

Previous electrical resistivity tomography (ERT) surveys and time domain electromagnetic (TDEM) data were integrated with a newly acquired ERT profile (ERT-06) are used to characterize the subsurface structure and identify potential groundwater bearing zones. …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Cosmetic Clamper, Daniel Peter Gates, Bruno Roberto Martinez, Samantha Remy, Zachary Joseph Roeber

Mechanical Engineering

Cosmetic Clamper Mechanical Engineering Senior Project was a senior project at California Polytechnic State University, San Luis Obispo in the College of Engineering, Mechanical Engineering Department. The project ran from September 2025 to June 2026. The project developed the Cosmetic Clamper device, an accessibility product designed to help individuals with unilateral upper extremity motor deficits open, use, and close cosmetic containers independently.

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Douglas Fir Bending Strength At Sub-Pyrolytic Temperatures And Aftermath, David Kroeker, Aran Badasian

Architectural Engineering

Current fire design for wood framed buildings assumes a protective layer of charring and the material beyond that layer is entirely undamaged after the fire. It is documented that wood does experience a loss of ultimate capacity during a fire, however, the bulk of tests providing the reduction in capacity have been in tensile and compressive tests. The tests described in this paper were conducted to investigate the reduction in bending strengths both during and after being raised to pre-pyrolytic temperatures. These tests confirmed current design practices as laid out in the National Design Specification for Wood Construction 2024, while …

Evaluation Of Alternative Solvents For Electrospinning Occluded Scaffolds To Model Intracranial Atherosclerotic Disease In Blood Vessel Mimics, Olivia D. Rankin

Master's Theses

Intracranial atherosclerotic disease (ICAD) is characterized by a buildup of fatty plaque within the walls of arteries supplying the brain, resulting in vessel narrowing, restricted blood flow, and increased risk of ischemic stroke. While various treatments exist for ICAD, most are accompanied by high recurrent stroke rates and other adverse events, highlighting the need for further investigation and models for pre-clinical testing. Tissue engineered Blood Vessel Mimics (BVMs), consisting of a polymer scaffold sodded with human vascular cells, serve as physiologically relevant in vitro models for vascular device testing. This thesis focused on the application of alternative solvents to a …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Develop & Test Radar Assignments For Future Graduate Curriculum, Thomas Ky Hong, Christopher William Hoferer

Electrical Engineering

With Cal Poly’s switch to semesters, many upper-level electives lack enough depth and structured content for the new 15-week format. In addition, while the Electrical Engineering department currently offers approximately five weeks of RADAR-focused laboratory material within EE 424: Intro to Remote Sensing, this limited exposure is insufficient to provide students with a comprehensive understanding of RADAR theory and practical applications. The semester conversion presents a timely opportunity to expand this existing five-week RADAR segment into a full 15-week course that integrates both lecture and laboratory content. To address the current curriculum gap, we have seamlessly extended the RADAR exercises …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Content Warning, Editorial Board

Intertidal

No abstract provided.

Editors' Note, Editorial Board

Intertidal

No abstract provided.

Copyright Information, Editorial Board

Intertidal

No abstract provided.

Muon Lifetime: Theory, Experiment, And Simulation, Soren Agustin Munoz

Physics

This senior project investigates the muon lifetime through three complementary approaches: theoretical calculation, laboratory measurement, and computational simulation. The theoretical component develops the necessary background from relativistic field theory to the effective weak interaction, culminating in the leading-order Fermi-theory prediction of τ ≈ 2.2 μs, which explains why the muon lifetime lies on the microsecond scale.

The experimental component measures the lifetime of stopped cosmic-ray muons using a plastic scintillator, photomultiplier tube, and analog timing electronics. A binned Poisson likelihood fit to the primary 15-day acquisition run τ = 2.17^+0.03_-0.09 μs, consistent with the accepted value within the …

Validation Of Electromagnetic Shower Development In A Reduced Alice Focal-E Detector Model Using Geant4, Isaac Lara Romo

Physics

This project focuses on the preliminary simulation of a reduced FoCal-E detector model for the ALICE experiment at CERN. Beamline tests were simulated using an electron gun at various incident energies, and the results were compared with those of the FoCal group. The longitudinal charge deposition per sensor layer was compared between the two setups to verify that the reduced model exhibited expected calorimeter behavior. Additionally, the transverse signal across the high-granularity sensor layers was examined to determine whether the reduced model reproduced the expected lateral development of electromagnetic showers. The results obtained from these measurements show that the reduced …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Compressor Rotor Joints And Interference Fit Study, Isabela Jimenez, Aubrey Perez, Isaiah Guerrero, Jireh Velasquez

Mechanical Engineering

Solar Turbines need a comprehensive study on the effects axial and radial inference fits have on turbine compressor rotor stiffness. The aft weldment of the compressor has press-fit dowel pins and pilot joints to connect one weldment section to another. These fits need to be assessed through a finite element modal analysis, as well as practically tested through modal impacts to investigate how the fits affect the stiffness of the turbine’s connected weldments. The experimental data will be used to validate the finite element analysis (FEA) model.

Forged Carbon Fiber Adventure Project, Timothy Villafana, Victor Javadoff, Nathan Pittiglio, Cooper Starr

Mechanical Engineering

Forged carbon fiber compression molding remains a relatively under-researched manufacturing process. While there are documented processes online, the options are few and far between. Our sponsor and case-study user, Dr. Mello, tasked us with the goal of researching and developing a process for forged carbon fiber compression molding through means of modifying his prototype of a bike pack handlebar cradle (figure 3). This prototype will allow us to create tooling which will be used to manufacture a handlebar cradle that can withstand larger loads and more extreme environments using our developed process. A handlebar cradle is a structural support for …

Raytheon Rtx Autonomous Vehicle Competition (Avc) - Unmanned Ground Vehicle (Ugv), Bryant Jonathan Martinez-Bautista, Geovanni Lara, Jared Herrera, Jose Barrera

Mechanical Engineering

Raytheon RTX has four universities participating in a competition to successfully complete various challenges with a UAV and UGV including navigation and landing. The students must work collaboratively to integrate and manufacture a working UGV that is compatible with the UAV.

Our sponsor is Raytheon, more specifically Mr. Luis Esparza. Important stakeholders also include Cal Poly and the entire team of ME & CPE working on the project. Raytheon and Luis are looking for innovative solutions that can be applied for real world scenarios where UAV’s and UGV’s are applied. Cal Poly is gaining recognition, and the team is gaining …

Peltier-Based Hydration Accumulation Terminal (P.H.A.T.), Jenner Mucher, Ethan Pace, Renee Robolledo, Sabrina Luo, Taehoon Lee, Tarsem Pal

Mechanical Engineering

The objective of this project is to design an innovative potable water dispenser capable of safely delivering hot, ambient, and chilled water on demand for human lander missions. The system will support astronauts’ hydration and food rehydration needs while minimizing mass, power, maintenance, and contamination risks in microgravity and partial-gravity environments. Current spacecraft dispensers, such as the International Space Station (ISS) system, provide only heated water and have limited temperature control, cleaning accessibility, and microbial resilience. Building on NASA heritage designs and lessons learned from the ISS Potable Water Dispenser, this project advances a lighter, simpler, and more energy-efficient concept …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.