Digital Commons Network^™

Dynamic Modeling And Simulation Of A Power Generation Steam Rankine Cycle For A Fluoride Salt-Cooled High-Temperature Reactor Nuclear Power Plant, William R. Ton

Master's Theses

Nuclear Fluoride Salt-Cooled High-Temperature Reactors (FHRs) have the potential to greatly improve nuclear technology in terms of safety and cost. By combining molten salt coolant technology from the Molten Salt Reactor (MSR) and TRISO fuel technology from the Very High Temperature Gas Reactor (VHTR), FHRs may operate at significantly lower pressures than Light Water Reactors (LWRs) and with a more robust fuel source that is excellent at containing fission products. However, as no FHR has been built, there are still many design questions to address. This thesis uses transient computer modeling and simulation to investigate how an FHR could potentially …

A Comparative Evaluation Of Feedback Strategies For Enhancing Student Software Test Suite Writing Outcomes, Ashton Alonge

Master's Theses

Background and Context

Software testing is a fundamental component of computer science education, forming the basis for students’ ability to ensure program correctness and reliability. Despite its importance, many students struggle to design test cases that effectively expose faults and achieve meaningful test coverage. Traditional instructional approaches often emphasize code coverage metrics such as line or branch coverage, but these metrics may not adequately capture the quality of student tests. Mutation analysis, which measures how well tests detect small, artificial faults (mutants) introduced into the program, offers a potentially richer measure of test effectiveness. However, little is known about how …

Real Time Markerless 3d Hand Tracking For Intuitive Robotic Arm Control, Dylan G. Featherson

Master's Theses

This thesis presents a real-time, markerless motion-capture system for intuitive control of a multi-degree-of-freedom robotic arm. Using two synchronized RGB cameras and stereo-vision triangulation, the system reconstructs the three-dimensional position of a user’s hand without the need for physical markers or wearable sensors. The reconstructed 3D coordinates are mapped directly to the end-effector position of the Quanser QArm, a four-degree-of-freedom educational manipulator. Developed entirely in Python, the system integrates stereo camera calibration, 3D hand tracking with MediaPipe, coordinate transformation, and inverse kinematics into a unified real-time control pipeline operating at approximately 200 Hz. Calibration is performed through a checkerboard-based stereo …

Generalized Detection Of Animal Behavior Using Accelerometers, Alexander J. Arrieta

Master's Theses

Animal mounted sensors are becoming increasingly used to passively monitor both domestic and wild animals. Advances in lightweight accelerometer and GPS technology have allowed many animals to be fitted with high accuracy sensors for extended periods of time. This leads to new opportunities to study animal behavior without direct observation. However, interpreting the raw data is difficult due to the high volume and missing context of the information. Machine learning techniques excel at extracting information from raw data streams and are excellent candidates for processing the sensor data. However, due to large variance in how different animals execute the same …

Origami-Inspired Pneumatic Soft Robotic Gripper, Conor J. Schott

Master's Theses

This thesis presents the design and evaluation of a vacuum-actuated, origami-based soft robotic gripper. A custom Sea Urchin crease pattern forms a lightweight folding skeleton that collapses radially under vacuum. The system emphasizes low cost and accessibility through laser cutting, 3D printing, and silicone molding. The Sea Urchin geometry was selected after digital and physical screening of candidate crease patterns for smooth folding, low strain concentration, and uniform inward motion. The folding skeleton is laser cut from 4 mil drafting film and folded into a compliant core. Four membrane configurations were developed: an origami gripper with a 36-inch balloon (Design …

Per- And Poly-Fluoroalkyl Substances Fate Across California Wastewater Treatment Plants: A Meta-Analysis Of Formation, Distribution, And Persistence, Elizabeth Reineke

Master's Theses

Per- and poly-fluoroalkyl substances (PFAS) are persistent contaminants that move through municipal and industrial wastewater systems with limited attenuation. As a result, they are increasingly detected in drinking water supplies. Despite growing regulatory concern, a systems-level understanding of PFAS behavior across multiple treatment facilities and watershed settings remains incomplete. This study compiled influent, effluent, and biosolids datasets from more than one hundred California wastewater treatment plants to evaluate PFAS occurrence, transformation, and partitioning across diverse treatment configurations. Analytical steps included calculating removal efficiencies, assessing precursor-to-product oxidation, evaluating co-contaminant correlations, and grouping facilities by process design to quantify configuration-specific fate patterns. …

Hallucination Techniques For Self-Supervised Synthetic Datasets For Mobile Robots, Wyatt D. Colburn

Master's Theses

Classical techniques in autonomous navigation struggle in tightly constrained spaces. Machine learning has been shown to perform better in these difficult environments but most techniques require large amounts of navigation experience for training. Using a new machine learning paradigm learning from hallucination (LfH), training data can be collected in a safe environment and not require supervision. Data is collected in real time while an agent performs a random walk in free space, supervision is not required as there are no obstacles for the robot to run into. After a random walk a post processing pipeline will hallucinate a safety corridor …

Serum Concentrations Of Inflammatory Markers And Selected Nutrient Metabolites In Holstein And Jersey Cows Across The Transition Period, Avery Orr

Master's Theses

The transition period, spanning the weeks surrounding parturition, requires dairy cows to undergo synchronized metabolic, endocrine, and immunological adjustments that support the onset of lactation but also heighten disease susceptibility. Although individual inflammatory or metabolic biomarkers have been extensively studied, the integrated immunometabolic dynamics that occur across this period and the difference between breeds is not fully understood. The objective of this study was to characterize longitudinal patterns in key nutrient metabolites and inflammatory markers in Holstein and Jersey cows and assess how these systems interact across the transition period.

A total of 63 Holstein and Jersey cows were sampled …

On Sobolev Spaces And The Existence Of Weak Solutions To Boundary Value Problems, Skye X. Paul

Master's Theses

Many boundary value problems that arise in mathematical models have close connections to second order elliptic partial differential equations. This thesis introduces the idea of weak derivatives and Sobolev Spaces to generalize possible solutions. Using functional analysis centered around the Lax-Milgram theorem, we show the existence of these generalized solutions to boundary value problems including Laplace's Equation, 2nd order linear ODEs, and ultimately a general second order elliptic PDE. The work cumulates with recovering a number of central theorems of functional analysis in the context of Sobolev Spaces, creating a new perspective on the solvability of these boundary value problems.

Aged 539 Graduate Internship Report- Mount Whitney High School, Matthew C. Medeiros

Agricultural Education: Graduate Internship Reports

This project reviews the Mount Whitney High School Agricultural Education Program. Through evaluation of our program's needs, there was a lack of chapter promotion outside of social media. A chapter website was created to highlight Classroom, FFA, and SAE opportunities available to students in our program.

Life Cycle Assessment Of A Prefabricated Modular Timber Building, Bryan Mai

Construction Management

Traditional concrete construction carries a high carbon footprint, motivating interest in lower-impact alternatives such as prefabricated modular timber systems. This project conducts a process-based life cycle assessment (LCA) using OpenLCA to evaluate the environmental impacts of a modular timber building. Material quantities from major processes were modeled as flow inputs and converted into standardized OpenLCA units. Impact categories—including acidification potential, human toxicity, and energy/resource use—were analyzed to determine which materials and processes contribute most to overall environmental burden. Results show that transportation and plumbing materials drive the largest acidification impacts, while interior finishes dominate human toxicity. This LCA establishes a …

Building Kit For K-8 Education: An Introduction To Construction Fundamentals, Marc Joynt

Construction Management

Introducing construction concepts to young students requires tools that are both engaging and easy to use, which led to the development of a laser-cut building kit designed for K–8 classrooms. The process began with hand-drawn sketches to establish a simple, age-appropriate structure. The design was then modeled in AutoCAD, where each individual component was drafted for fabrication. After completing the digital model, the files were transferred into Rhino and organized by layer to ensure accurate communication with the laser cutters used to produce the final basswood pieces. Throughout the project, challenges such as material limitations, tolerance adjustments, and simplifying complex …

Academic Senate - Minutes, 11/18/2025, Academic Senate

Academic Senate Minutes

No abstract provided.

Executive Committee - Agenda, 11/04/2025, Academic Senate

Academic Senate Agendas

No abstract provided.

Executive Committee - Minutes, 11/04/2025, Academic Senate

Academic Senate Minutes

No abstract provided.

Cal Poly (Cp) Legged Robot, Sebastian Barboza, Jonathan Mchale, Isabella Sorensen, Isaac Golan

Mechanical Engineering

The Navy spends $60 billion annually on dangerous ship maintenance performed by sailors. To save lives and resources, the Naval Surface Warfare Center (NSWC) is looking for robots to replace sailors and navigate ships to perform various tasks. Robots with tracks and wheels have been most recently explored by NSWC, however they have encountered significant problems navigating the ships, especially through naval ship doorways with a significant ledge. By using a legged robot, our team hopes to solve these problems and have a robot that can navigate the ship with relative ease and stability.

Towards Automated And Explainable Insider Threat Response In Electronic Health Records: A Role-Aware Machine Learning Framework, Luca Lippi Ornstil

Master's Theses

Healthcare remains a prime target for cyberattacks, with insider misuse and credential compromise posing major risks to Electronic Health Records (EHRs). This thesis introduces a role-aware, explainable anomaly detection and response framework integrated with OpenEMR to address post-authentication threats. Four models—Local Outlier Factor (LOF), Isolation Forest, Autoencoder, and Graph Neural Network (GNN)—detect behavioral deviations across temporal, device, and role-based features, with LOF serving as the primary runtime detector. A configurable policy engine maps anomaly severity to proportional actions, from email alerts to read-only restrictions or account suspension, all reversible and auditable. Evaluation on real EHR logs shows the system’s operational …

Effects Of Temperature And Oxygen Stress On Two Populations Of Olympia Oysters (Ostrea Lurida) From Central California, Buyanzaya Buyanurt

Master's Theses

Olympia oysters (Ostrea lurida) are the only native oyster species to the North American West Coast. A once thriving species, O. lurida populations have dramatically declined over time due to factors such as overharvesting, habitat degradation, and the introduction of invasive predators. Although their populations are still present in estuaries along their habitat range, many of these same stressors persist today, preventing the re-establishment of dense oyster beds and hindering recovery of populations. Among these current day stressors, a major concern are the impacts of climate change, specifically warming water temperatures and the increased frequency of hypoxic events. …

Executive Committee - Agenda, 10/21/2025, Academic Senate

Academic Senate Agendas

No abstract provided.

Atlas Of Ai: Power, Politics And The Planetary Costs Of Artificial Intelligence - Book Review, Jelena Popov

Feminist Pedagogy

No abstract provided.

Review Of Ai Needs You: How We Can Change Ai’S Future And Save Our Own, Tracy A. Fernandez Rysavy

Feminist Pedagogy

AI Needs You: How We Can Change AI’s Future and Save Our Own urges citizens to band together now, while A.I. is still in its nascent stages, to head off its potentially destructive repercussions and ensure that the technology serves more than just a wealthy few. While such efforts might seem out of reach in our polarized society, author Verity Harding points to three cases from history where policy was heavily influenced by multistakeholder collaborations. This review encourages educators to use the book as a way to study business ethics; out-of-the-box thinking; and intersectional, inclusive consensus-building over a top-down approach.

Teaching About Abortion Access With Charley The Chatbot, Laura E. Willis, Kim O'Neill, Nicole Cushman

Feminist Pedagogy

Following the Dobbs v. Jackson Women's Health Organization (2022) decision which countermanded federal abortion protections, artificial intelligence (AI) can be used to identify, monitor, and track people seeking medical treatment. The teaching activity presented here asks students to consider data privacy concerns and the role of AI in seeking abortion care, before introducing them to Charley the Chatbot, an AI interface designed to protect and inform abortion seekers. Students interact with the chatbot based on a series of fictional vignettes about abortion seekers in various stages of pregnancy and geographic locations. Following a peer discussions, students examine both how restrictive …

Towards An Ecofeminist Pedagogy: The Environmental Ethics Of Ai, Jessica K. Crowell

Feminist Pedagogy

Previous scholarship has outlined some of the ethical considerations regarding the use of artificial intelligence (AI) in the classroom and beyond, such as the potentials for plagiarism, information bias, disinformation, or even violations of user privacy. Though research suggests that machine learning is a major and ever-increasing contributor to carbon emissions, there has been little discussion of how we teach about the ethics of AI from an environmental perspective. Therefore, this critical commentary first outlines how an ecofeminist pedagogy can help students consider the environmental and ecological effects of new technologies, including AI. At its core, an ecofeminist pedagogy argues …

Spatially Resolved [O Iii] Emission Line Kinematics Of Reverberation-Mapped Active Galactic Nuclei With The Keck Cosmic Web Imager, Raymond P. Remigio, Vivian U, Aaron J. Barth, Nico Winkel, Vardha N. Bennert, Tommaso Treu, Matthew A. Malkan, Sebastian Contreras, Peter R. Williams, Jordan N. Runco

Physics

We present optical integral-field spectroscopic data of ten nearby (0.02 ≤ z ≤ 0.05) Seyfert 1 galaxies taken with the Keck Cosmic Web Imager. We map the spatially resolved kinematics of the [O iii] gas and stars, and investigate the alignments between their global kinematic position angles (PAs). Large-scale gas motions are primarily dominated by rotation and are kinematically aligned with the stars (ΔPA ≤ 30°). However, eight galaxies exhibit nonrotational kinematic signatures (e.g., kinematic twists, possible outflows) in their ionized gas velocity fields near the nucleus. We compare aperture-wide measurements of the gas and stellar velocity dispersions (σ …

Building An Inclusive Ai Chatbot For Diverse Student Communities At Cal Poly: Uplift Ai, Gideon Telahun

College of Engineering Summer Undergraduate Research Program

This research project will investigate the ability of advanced Large Language Models (LLMs) to identify and assess misinformation across diverse forms of media, including text, images, and video. In an age where misleading content spreads rapidly across digital platforms, evaluating the reliability and integrity of AI systems tasked with fact-checking is critical. We will develop a comprehensive dataset composed of factual and misleading examples drawn from various well-known and reliable fact-checking organizations. Each item will be independently reviewed and transparently labeled to ensure reproducibility. We will then prompt a curated group of state-of-the-art LLMs—including GPT-4, Claude, Gemini, Perplexity, Grok, and …

Safety-Critical Formation Control Of Non-Holonomic Multi-Robot Systems In Communication-Limited Environments, Logan Beard

College of Engineering Summer Undergraduate Research Program

This project explores advanced methodologies for distributed planning, formation control, and coordination in heterogenous multi-agent robotic systems consisting of small mobile robots and nano unmanned aerial vehicles (UAVs). Leveraging decentralized control theories and optimization techniques, the research aims to develop robust algorithms for real-time collaborative task execution, efficient formation maintenance, and adaptive coordination strategies. Python and ROS will be used extensively to simulate, validate, and experimentally deploy distributed robotics algorithms. The student researcher significantly contributes to the theoretical and practical advancement of multi-agent system technologies.

Multi-Material Printer Development, Jessica Hu, Phoebe Eplett

College of Engineering Summer Undergraduate Research Program

Surgeons require pre-surgical models to practice procedures and improve success rates. However, the current process of creating physical models for practice using 3D printing is limited to producing homogeneous mimics of the human body, while the human body is a heterogeneous structure composed of multiple materials with varying properties, including bones, muscles, and skin. Additive manufacturing methods cannot easily print multiple materials simultaneously, as current AM machines only print homogeneous material, unlike the human body. In this proposal, we aim to develop a multi-material additive manufacturing system, from software to hardware, to manufacture pre-surgical models. We will investigate multi-material AM …

Analyzing Wearable Sensor Data From Individuals Undergoing Motor And Neurological Rehabilitation, Carly Smith

College of Engineering Summer Undergraduate Research Program

An ongoing study funded by the National Science Foundation (NSF) is focused on developing computational models of rehabilitation for people post-stroke. Stroke affects around 800,000 people per year in the US, and often leaves people with limited motor (movement) and neurological (brain-based) capability. Wearable sensors may allow clinicians to better understand how these individuals recover, and to better design therapies and interventions. We are seeking students who can use existing software, and perhaps adapt the software to extract, analyze, and visualize detail from study participants. This project will involve with the Cal Poly PI, and collaborators from physical therapy. This …

3d Printing Scoliosis Braces, Zak Neddo, Jaylan Mo

College of Engineering Summer Undergraduate Research Program

As 3D printing technology continues to transform the healthcare industry, the need for FDA-compliant additive manufacturing facilities in public universities has become increasingly important. While private companies and medical research institutions have successfully integrated 3D printing for medical device prototyping and surgical planning, public universities—including Cal Poly—lack the dedicated infrastructure needed to support FDA-regulated medical manufacturing and research. This project aims to bridge that gap by researching, designing, and implementing a dedicated FDA-compliant section within Cal Poly’s multi-purpose 3D Printing Facility. Over the course of eight weeks, student researchers will study FDA regulations, design an optimized facility layout, and implement …

Refurbishing And Deploying Oceanographic Equipment, Matthew Moore

College of Engineering Summer Undergraduate Research Program

In this SURP project, a student will help catalog, refurbish, test, and then deploy oceanographic equipment into Morro Bay and nearby coastal regions. In 2024, the Talke lab inherited approximately $300-400k of oceanographic equipment (sticker price) that was originally bought between 2000-2020. Instruments include multiple pressure gauges, velocity instruments, salinity-temperature-turbidity gauges, particle sizers, and a sonar for making bathymetric measurements. Help is needed to check (“talk to”) these instruments, determine which still work, and then field deploy them into the central coast., For some instruments, additional hardware (batteries, cables) and communication adapters may be needed. Because instrument software is often …