Digital Commons Network^™

Advanced Wildfire Hose Clamp, Kayla Wiseman, Andrei Lasc, James Martinez, Rachel Yee

Mechanical Engineering

We, Team AHC, have designed, manufactured, and tested an advanced firehose clamp for wildland firefighters to use during extended hose lays. The clamp is designed to stop high-pressure water flow in a firehose so that a new length of hose can be added. The current industry standard, the Timberline hose clamp, is expensive and wears down over time effecting the speed and success of hose lays. Our goal was to improve firefighter's tools and therefore improve fire fighting effectiveness.

Treadmill Platform For Quadrupedal Robots, Baxter J. Bartlett, Jack F. Butler, Phillip A. Shafik, Tarun S. Ganamur

Mechanical Engineering

Cal Poly Legged Robots, led by Professor Refvem and Professor Xing, has been leading Cal Poly’s attempts to simulate, produce, and test their legged robots. The initial testing of the locomotion of these robots can be dangerous to the robot since any bugs in the code could cause the robot to fall over and harm itself. Our responsibility as a team was to deliver a portable platform for testing the locomotion capabilities containing a fall prevention mechanism. In short, we have designed a platform for this purpose that consists of a treadmill surrounded by a wheeled chassis with a system …

Surf Sled 2.0, Troy I. Feinstein

Mechanical Engineering

This Preliminary Design Review documents the complete detail of our final design and justifies that our specifications were met. For our senior project though California Polytechnic University, we were assigned a design and build challenge from the company AmpSurf. The project was sponsored by the Founder of AmpSurf, Dana Cummings, and involved designing and manufacturing a fully functional Surf Sled. The objective was to safely carry a physically impaired AmpSurf client across the sand on a surfboard and launch them into the ocean. The goal for our team was to improve upon a previous design, Surf Sled 1.0, to be …

Backflow Relief Valve Test Stand, Olivia Mcnulty, Wiill Halvorsen, Ryan Dubois, David Leaman

Mechanical Engineering

This Final Design Review (FDR) document details the final design, manufacturing, testing, and results of the Zurn Wilkins Backflow Relief Valve Test Stand Project under the sponsorship of Brian Yale and Rueben Westmoreland. This project involves simulating real-world conditions of static pressure and water hammer cycling. The stand will give Zurn Wilkins’ engineers a method by which to test their relief valves prior to a rigorous, yearlong University of Southern California (USC) testing procedure. Our design involves using city water, a pump, a Zurn backflow preventer, and a control system to apply specific pressures to each end of the relief …

Fourth Wave Feminist Magazine, Chase E. Iseley

Graphic Communication

The idea of feminism is often negatively misconstrued, and much of the controversy surrounding feminism stems from perpetuated stereotypes and misconceptions. Although feminism may mean something different to everyone, the advocacy of women’s rights and equality of the sexes should not be overlooked. This magazine will be a collection of articles which clarify misconceptions, define feminism, and highlight women and other supporters. This magazine is an opportunity to educate and inspire future feminists.

Reservoir System For Tissue-On-A-Chip, Olivia Corvelli, Kyle Cekada, Ryan Adams

Biomedical Engineering

Dr. Christopher Heylman’s research laboratory needs an improved reservoir system for their microfluidic device that reduces flow variance, failures, and the physical footprint. Current microfluidic devices have various types of reservoir systems, including vials, 96-well plates, and other cylindrical wells. Several patents and standards must be considered when designing the reservoir system. To develop a prototype the following design process was used: product discovery, project planning, product definition, conceptual design, product development. Dr. Heylman expressed various customer requirements including increased time between cell media changes, reduced leaks and blockages, and reduced flow variance. These were then translated into engineering requirements. …

Audio Research Codec, Charlie Sutro

Electrical Engineering

Active Noise and Vibration Control (ANVC) systems are of increasing relevance as urban areas get more densely populated with people and their noise sources. Community noise is of great importance to many forms of transit that aim to bring mobility to a region with minimal subsequent noise pollution. Active Vibration Control (AVC) is an emerging field of research which can be employed to further mitigated unwanted harshness in an acoustic environment by extending the principals of Active Noise Control (ANC)to solid mediums using surface transducers and piezoelectric actuators.

The Audio Research Codec (ARC) is a compact, cost-effective system designed for …

Cardio Trainer, Levi Rash, Cristian Rodriguez

Electrical Engineering

The Cardio Trainer Device is a wearable device that guides the user through a physical exercise based on the user’s heartbeat measurements. Users interface with the device via a wearable band. The band determines the heartbeat of the user in real time and, using that reading, gives the user verbal instructions to optimize their workout. These verbal instructions then serve to control the physical exertion of the user and are delivered through an audio device. Users input personal physical metrics to the Cardio Trainer Device that tailor the performance of the device in a manner of ways: rate of instruction, …

High Performance Radar System, Danny Maas

Electrical Engineering

This report covers the design, fabrication, and test of an X-band FMCW radar inspired by the radars from Cal Poly course EE 541, “Advanced Microwave Laboratory.” In this class, 2.4GHz Doppler and FMCW radars are designed and built using consumer off-the-shelf (COTS) components. Operability is the focus of this class, sacrificing performance, accuracy, and precision. this project aims to improve upon those radars by using custom-designed components instead of COTS components and shifting the operating frequency to 10GHz.. The use of custom components can improve output power and frequency stability, and higher frequency reduces component size. The FCC allows amateur …

Headlamp/Bike Light Damping System, Ethan Reece Clark, Alec Stonehouse, Omeed Ostry, Mitchel Anderson

Mechanical Engineering

The task for this project is to design a headlamp and/or bike light that absorbs the impact shocks from the user’s actions. The user that the system is being designed for may be riding a bike or running on a trail in the evening or early in the morning where the light needs to be stabilized and their path must be illuminated. This report presents the final design chosen after months of prototyping and design iteration. It encompasses the system design, design verification through testing, implementation, future recommendations, and lessons learned throughout the process. The chosen design utilizes a fully …

Flexible Water Cooling, Joshua Terlaje, Andrew Lin, Nicholas Morales, Tanner Parrott

Mechanical Engineering

The goal of this project is to develop and deploy a water-cooling system to reduce the danger of heat exhaustion among communities of farmworkers. Currently, it is difficult to keep chilled water available throughout the workday when using portable water coolers. The idea uses a refrigeration system to chill the water supply by using the power take-off (PTO) on farm equipment and a corresponding generator to get around this restriction.

The project places a strong premium on keeping the chilled water supply at a maximum temperature of 59°F to ensure compliance with the California Department of Industrial Relations' requirements. Each …

Metamaterial-Based Soft Actuators, Savannah June Cheney, Nathan Kessenich, Marco Leen, Merek Mcgill

Mechanical Engineering

For this project the team was tasked with designing a soft actuator that incorporated aspects of mechanical metamaterials. The team’s goal was to demonstrate the feasibility of structural metamaterials in the field of soft robotics and demonstrate a novel response with a final assembly. Also included in the team's discussion are the manufacturing steps, protype tests & results, and suggested future next steps. Following the previous report (critical design review) the team chose to follow the path of designing a continuum robot with metamaterials incorporated into the design. A continuum robot consists of a soft cylindrical body with rigid evenly …

Microfabrication Lab Furnace Upgrade, Brooke Ann Benedict, Benjamin Ozer Fields, Nathaniel David Burtnett, Thomas Mackay Taylor

Mechanical Engineering

This project, undertaken by the Mechanical Engineering Department at California Polytechnic State University, aimed to upgrade the control system, user interface, and control software for Cal Poly's oxidation and diffusion furnaces. The upgrade was designed to enhance the usability of the furnaces for students learning in the microfabrication lab and improve the lab's image for prospective students. The project involved a comprehensive design process, including mechanical design, controls, software, human factors, heat transfer, fluid mechanics, electrical design, integration, and testing. The implementation phase entailed procurement of over 300 distinct components, manufacturing, and assembly.

The project's primary goal was to ensure …

Therapeutic Mechanical Horse Project, Broghan Martin, Carson Roff, Zach Barnisham, Lydia Barnes

Mechanical Engineering

This project team created a simple mechanical model of a horse that disabled children could ride on to feel more comfortable partaking in equine therapy. This project was sponsored by Jack’s Helping Hand as part of their equine therapy program. The team went through the entire design process of researching, ideating, prototyping, and testing to create the final product. Finite element analysis of the structural members of the horse was performed. The forces used in that model were later validated through testing of the strength of those same members after manufacturing. In the end, a self-actuating single degree of freedom …

Disc Golf Throwing Robot, Nevada S. Schultz, Sydney M. Lewis, Erick Edmundo Daza, Rachel Alysse Greenberg, Peter M. Kean

Mechanical Engineering

Disc golf companies need better methods to test disc flight. The scope of this project is to create a disc throwing robot that can throw a disc golf driver 450-500 feet, with control over the speed, spin, and release angle. Research shows that multiple disc-throwing products exist; however, none meet the full requirements of this project. The Cal Poly senior project design team created a proof-of-concept machine. This prototype started as a two-wheel mechanism. Eventually, a third wheel was added, allowing for complete control over disc spin. The three-wheel prototype reached 62 mph when perfectly calibrated. The prototype is accurate, …

Baja Sae Semi-Active Suspension, Cameron Paul Jones, Ethan Jacobi Mikel, Joshua Macguire Wright, Aditya Garg

Mechanical Engineering

This document outlines the design and justification for the final design of the Baja SAE Semi-Active Suspension Senior Project. The goal of the project was to build a base valve that can adjust suspension damping rates on the fly. This document details the ideation, design, manufacturing, design verification results, and detailed drawing package for the project. Additionally, this document includes information regarding the pressure drop calculator, O-ring calculations, and CAD. The manufacturing processes used to create the valve and the testing and evaluation of the valve are included as well. Finally, the methods that were used to manage this project …

Graduate Internship Report - Cal Poly Bull Test, Kayla Marie Dubowsky

Agricultural Education: Graduate Internship Reports

The Cal Poly Bull Test has a long-standing history on the university campus. The program has continued to grow and improve since it was founded in 1956 and with these improvements to the program, the marketing and curriculum need to adapt as well. For this internship, I worked in partnership with Dr. McFarlane on three main projects focusing on rebranding, curriculum development, and the creation of marketing materials. The rebranding consisted of the creation of a new logo and an updated brand guide. The curriculum development consisted of the creation of a marketing module for the enterprise-class that focuses on …

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

Urban Design On A Global Scale: A Comparison Of Four Cities, Avery Grace Crower, Shane N. Strunk

City and Regional Planning

This senior project encompasses an analysis of urban design on a global scale. The authors chose four cities to analyze using eight different urban design elements. The cities chosen were Los Angeles, Paris, Rio de Janeiro, and Tokyo. Understanding how each city exemplified the urban design elements, assisted the authors in conducting a compare and contrast of the most and least desirable design attributes within each city. The authors were able to conclude with important takeaways and lessons from the analysis and comparison.

Advising Communication In Finance, Jordan J. Schumann

Communication Studies

Communication is an important factor in relationships. When it comes to financial advising and the advisors’ relationship with their clients, it is no different. However, the driving factor of what makes a client choose one advisor over another remains in question. As such a question builds: what does an advisor do to maintain a client and promote gaining new ones? This study examines the experiences current advisors have had in their respective careers. To examine this topic, communication theories (Social Cognitive Theory, Source Credibility Theory, and Uncertainty Reduction Theory) are called upon to inform the outcomes of advisors' experiences. The …

Three Rivers: Plan Analysis And Recommendations Including An Environmental Justice Addendum, Gerardo Arregui

City and Regional Planning

This document examines the existing Three Rivers Community Plan in order to find shortcomings, missing information and to recommend appropriate format and content for future iterations. The final section of this document has been designed to be a model for the Environmental Justice section for the Three River’s future community plan update because the current plan is silent on this topic.

Bike Share: A Discussion And Case Study Analysis Including Recommendations For Cal Poly And The City Of San Luis Obispo, Gabrielle N. Delavallade

City and Regional Planning

Since 2015, micromobility has swiftly expanded to new cities across the United States. Micromobility is defined as a category of transportation services that are shared-use, lightweight, and personal use such as electric scooters (escooters), shared bicycles, and electric bicycles (e-bikes). Micromobility vehicles can be person powered, electrically powered, or a combination of the two (CRCOG, 2022; BTS, 2022). One form of micromobility that is gaining popularity is known as bicycle share. In 2020, the North American Bikeshare and Scootershare Association (NABSA) 2020 State of the Industry Report found that an estimated 83.4 million trips were taken in North America alone …

Filters For Fiji: A Modified Cracker Box Biosand Filter For Rural Fiji, Geneva Newell, Cameron Lowrey, Thomas Burt, Lexie Caterine

Civil and Environmental Engineering

Water quality remains a major issue throughout rural Fiji, as current solutions rely on outside organizations providing money or technology. The goal of Filters for Fiji’s research was to develop a sustainable water filtration method for the people of rural Fiji, through ethnographic and biological research. In order to be sustainable, the filter had to be inexpensive (less than USD$15), simply built and maintained, and suitable for the end-user. The driving question of the research was: can a plastic, modified biosand filter be constructed from materials that could be sourced locally in rural Fijian communities? To answer this question, feedback …

The Effects Of Dissolved Hydrogen On The Mechanical Properties And Fracture Behavior Of Se508 Nitinol Wire For Biomedical Components, Kathryn Linn Meany, Ryan Zhao Thompson

Materials Engineering

Superelastic nitinol is competitive in the medical device industry due to its unique properties. Typical processing methods, such as electropolishing and etching, can introduce hydrogen into nitinol’s microstructure, which is known to affect its tensile properties. Due to the lack of information about hydrogen content in processed nitinol, an experiment was designed to find a relationship between hydrogen content and SE508 nitinol wire’s tensile strength, permanent set, ductility, and mode-of-failure of the fracture surface. Using a 50% sulfuric acid to mimic industry practices, five wire samples were exposed to the acid solution at seven different time intervals (ranging from 0 …

Effect Of Environmental And Ultraviolet Degradation On The Albedo Of Polyethylene Sheet Materials For Improved Energy Harvesting By Bifacial Photovoltaic Power Plants, William A. Jang, Roxy H. Jackson-Gain

Materials Engineering

Solar energy farms typically utilize monofacial photovoltaic (mPV) cells in their arrays to capture direct sunlight to produce renewable energy. However, the efficiency of these farms can be increased by 2 – 6% through the implementation of bifacial photovoltaic cells (bPV). These bPV cells function by capturing incident ultraviolet (UV) light energy that is reflected off the surface to increase its overall energy production. The amount of UV energy that is reflected is dependent on the albedo value of surface, which is a measure of energy reflectance. In this study, samples of unreinforced polyethylene (PE), scrim-reinforced polyethylene (SR-PE), and woven …

Covalent Adaptable Networks For Wood Coatings, Jachin Boaz Clarke

Materials Engineering

Wood swells and shrinks causing problems with seasonal humidity. Applying thick coatings of reactive finishes based on cross-linked polyurethane, epoxy, or polyesters can slow moisture-vapor exchange. However, the use of thick coatings leads to cracking and crazing sooner than thin finishes. This research proposes the addition of 3.3 mol % triazabicyclodecene, a conventionally used covalent adaptable network catalyst, in a commercially available polyester-based wood coating. The self-healing of the wood coating is tested using DMA stress relaxation and compression molding. The result from DMA renders inconclusive and compression molding indicates the novel wood coating oxidizes at elevated temperatures. The wood …

Benefits Of Having A Disability Cultural Center At Cal Poly, Chau Nguyen

Political Science

All colleges and universities in the United States are legally required to accommodate their students with disabilities. However, many schools do not support their disabled student body in ways that go beyond what they are legally required to provide under the Americans with Disabilities Act (ADA) and Section 504 of the Rehabilitation Act. Though every university and college in the United States has a dedicated ADA compliance office, students with disabilities still express that their holistic needs are unmet and that they feel unsupported by their schools. Establishing Disability Cultural Programs and Centers is one method that colleges and universities …

Utilization Of Agtek In Construction Management Classes, Ryan C. Dougher

Construction Management

AGTEK Sitework 4D is a building information modeling program designed to conduct takeoff and estimating procedures for earthwork purposes. This program provides an opportunity for the construction management department to implement a building information modeling (BIM) program related to heavy civil construction. Nearly seventy percent of construction management students agree that the BIM programs that they have learned during their time at Cal Poly have been directed toward residential and commercial construction. AGTEK can provide students an opportunity to learn site planning, earthwork estimating, as well as cut and fill diagrams all through a new BIM experience geared toward heavy …

Perceptions Of Major Barriers On The Leed Scorecard Preventing Projects From Reaching The Platinum Level, Gavin R. Beadle

Construction Management

This paper is an overview of the main barriers faced by general contractors when working with the LEED Scorecard on their projects. Oftentimes projects either do not chase LEED certification or are held up at the gold or silver certification levels, never making it to the highest-level being platinum. The purpose of this paper is to identify the main factors general contractors are facing causing their projects to be held up at a lower certification level or not certified at all. In addition to examining the main factors, some specific credits on the scorecard will also be examined that are …

The Sonoma Developmental Center Redevelopment Project: A Stakeholder Salience And Conflict Analysis Case Study, Leo Dickson

Construction Management

This analytical case study is an experimental exploration into the utilization of stakeholder salience research to analyze land redevelopment projects from a managerial perspective. The study attempted to develop and apply a simple and approachable research model to a real redevelopment project. The research design is derived from an existing mathematical model designed to quantitatively measure stakeholder salience. Stakeholder salience theory and Pawlak’s conflict theory are the fundamental concepts used to create the research design model. The objective of this research was to assess its effectiveness when applied to a rural land redevelopment setting in the United States. The Sonoma …