Digital Commons Network^™

Tanzania Mbesese Initiative 2026, June Ezzell, Sam Liebman, Noah Beyer, Kate Hamilton, Luke Vollert, Kylee Borgen, Cody Balazs, Meg Mclaughlin

Architectural Engineering

The Tanzania Mbesese Initiative 2026 Senior Project supports a multi-year design-build effort to establish the Same Polytechnic College in Same, Tanzania. This community faces high poverty levels and limited access to higher education, necessitating sustainable infrastructure to support tertiary education. To prepare for the upcoming July phase of construction, an eight-student Architectural Engineering team designed three practical and resilient structures: a Shade Structure, a Water Collection Structure, and a Reusable Scaffolding system. The final design applied structural analysis, modeling, and hand-tool fabrication practice to balance material efficiency with long-term structural durability. The deliverables provide comprehensive construction documentation, complete material takeoffs, …

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Caed Shop Entrance Wall Construction, Mason Neil Mitchell, Benjamin Joseph Rohrer

Architectural Engineering

This project involves the demolition and reconstruction of the CAED Support Shop Wall at Cal Poly, San Luis Obispo. The project was designed as a multidisciplinary project, combining architectural engineering and construction management students who collaborated on the rehabilitation of an existing structure. This project aimed to use “replication” as a means of historical preservation and restoration, specifically in the fabrication of custom CMU members.

Sotto L'Ulivo, Makayley Washburn, Alex Twomey, Juliana Pantoja, Megan Boyle, Mark Tain Lawson

Architectural Engineering

Over the span of six years, four Architectural Engineering senior project teams designed and developed a shade structure adjacent to Engineering West (Building 21) at California Polytechnic State University, San Luis Obispo. Each phase of the project built upon the last, showcasing student work and application of the ARCE curriculum with the help and guidance of Professor Craig Baltimore.

In the fall of 2025, five Architectural Engineering seniors chose to continue this project and complete the construction of the structure and plaza. The Sotto L’Ulivo phase picked up where the last team left off, taking on the construction of the …

Concrete And Masonry Code (Beams), Michael Alexander Simas Rocha

Architectural Engineering

This report only covers the beam design of the code that was written. The end goal of this project is to write code for concrete and masonry following what was taught in the lecture classes. This project is acting as a foundation for the end goal of a program that can compete with SAP2000, ETABS, RISA, and others. One final goal is to have the print out have the look and feel of having been done by hand. While coding; several factors were recorded including time spent coding, debugging, and then to do three problems by hand vs how long …

The Xenaform: Structure Through Geometry, Justin Tobias Mendoza Ocampo, Emily Marie Labrador, Banyan Walker, Paul Minchev, Brayden Sean Kelleher, Ethan Mario Ceccarelli

Architectural Engineering

The XenaForm is a geometry-driven structural system that incorporates complex forms generated from simple rules of stability, inspired by the work of Iannis Xenakis and reworked by Professor Edmond Saliklis. This project investigates how structural stability can be achieved through geometric configurations rather than a reliance upon material strength alone. By utilizing the design principles of trilateration and the interconnection of triangular panels, the XenaForm was constructed in accordance with the rules of the International Association for Shell and Spatial Structures Pavilion Competition. The team generated several design iterations and selected a final design to fabricate and construct, considering affordability, …

2026 Annual V.E.S.T Hackathon: Improving Gender Inclusivity Of Glove Fitting, Makena E. Fix

Construction Management

Safety gloves are an essential part of field personnel's personal protective equipment (PPE). Gloves protect against cuts, burns, chemicals, and other hazards. Properly fitting gloves reduce the risk of injury by enabling the suitable use of task-specific protection. The 2026 Verifying Everyone’s Safety Together (V.E.S.T) Hackathon was hosted to identify ways in which gloves fit workers differently, and evaluated six different glove types, ranging from woven cut rated to firefighting gloves. To understand experiences faced by workers with their PPE, firefighters were interviewed and discussions were held at the Hackathon. The collaborative event brought industry members and students together to …

Skip The Grid: Bringing Power To The Navajo And Hopi Nation, Benjamin R. Narciso

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the program's fifth year. The project's purpose was to improve the quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry partners, …

Evaluation Of Laser Doppler Flowmetry And Transillumination Laser Speckle Contrast Imaging To Measure Blood Flow Change In Ischemia Mouse Hindlimb Models, Simon Park

Master's Theses

Peripheral Artery Disease (PAD), caused by plaque buildup and narrowing of the arteries, reduces blood flow to the extremities. Promoting collateral arteriogenesis can help redirect blood flow. However, simple growth of collaterals may not be enough to reverse PAD. Instead, the ability for the collaterals to vasodilate and control blood flow is important, meaning assessing collateral function is important for the arteriogenesis assesment. Although microscopy techniques can measure vasodilation, contrast limitations in larger vessels such as collaterals make blood flow measurements difficult. Techniques such as ultrasound or magnetic resonance imaging (MRI) can measure blood flow but have limitations with cost …

Pill, Evan Doi

Intertidal

No abstract provided.

Completing The Street: Rapid Redesign Of Citywide Road Networks Using Arcgis, Davidson Drake

City and Regional Planning

This paper was written by Davidson Drake, a student at California Polytechnic State University, San Luis Obispo, and a volunteer with the City of Pomona Planning Department. The mapping, design, and analysis documented in this paper were produced by the author for the City of Pomona as part of its Complete Streets work. While the work shown here is the author’s own, the broader project would not be possible without the efforts of Karla Foster and Max Pastore, who contributed key components to the project.

Pomona’s Complete Streets project represents an ambitious effort to rethink the city’s street network as …

Artificial Intelligence In Higher Education: A Snapshot In Time Of Faculty Perspectives And Institutional Adaptation, Alexander Levine

Journalism

The purpose of this research is to examine where higher education currently stands in relation to artificial intelligence, how it arrived at this moment, and where the future may be heading. More specifically, this study seeks to document a snapshot in time of how faculty members, university administrators, and educators perceive the role of artificial intelligence in higher education and how they believe it may shape the academic landscape moving forward.

By examining how artificial intelligence currently influences teaching, learning, and institutional decision-making, this study aims to create a record of perspectives during a period of rapid technological change. As …

Early Dementia Tracking Utilizing Virtual Reality, Gabriel Deguzman, Manuel Hernandez, Ryan Iglesias, Jose Ornelas

General Engineering

This project aims to create a simulation in virtual reality that replicates an activity that older adults are familiar with and presents an objective for the user to complete. The simulation will monitor the user’s cognitive functions based on their performance. The functionality of the designed program includes, but is not limited to: continuous tracking of cognitive behavior, skipped steps, and completion times. The program will take in relevant data and provide results on the monitored tasks and give the user a conclusion for further action. The application of this simulation will not be used as a medical device or …

Catalyzed Chemical Recycling Of Pet Plastic Waste, Irfan Oyon Chowdhury, Caiden Scott Figlioli

Materials Engineering

Plastic waste accumulation and continued reliance on fossil fuel-based polymer feedstocks remain major challenges in the plastics industry. While mechanical recycling is widely used, repeated thermal processing, contamination, and polymer degradation reduce recycled plastic quality. Chemical recycling offers an alternative by depolymerizing plastics into reusable monomers that can produce materials with properties closer to virgin plastics.

This study investigated the glycolysis of post-consumer poly(ethylene terephthalate) (PET) using ethylene glycol to produce bis(2-hydroxyethyl) terephthalate (BHET). Zinc oxide (ZnO) nanoparticles were synthesized by solution precipitation and used with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) as a co-catalyst system. PET glycolysis was performed using 2.00 g …

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

Wind Power Turbine Pitching, Sierra Bindseil, Olivia Hoffsis, Izik Hingeley, Tucker Donahue

Mechanical Engineering

It is crucial that wind turbines are able to control the angle of their blades relative to the wind for optimal performance, efficiency, and safety [1]. This project will design a pitching mechanism for the Cal Poly Wind Power turbine that will compete in the Collegiate Wind Competition (CWC). Currently, for full scale wind turbines, the industry standard design includes the pitch of each blade being controlled by its own individual motor [2]. Because of the smaller scale of Cal Poly Wind Power’s turbine, along with power usage constraints, three separate motors are not a practical approach. Cal Poly Wind …

Accessible Rolling Garden Box With Automated Watering System, Lucas Meneghetti, Gabe Haarberg, Alex Seybold, Matthew Podgorski

Mechanical Engineering

Students in the Special Day Class at Oceano Elementary School face challenges participating in traditional gardening activities due to mobility and accessibility limitations. To address this need, a wheelchair-accessible Rolling Garden Box was designed and constructed to provide an engaging, hands-on learning experience that promotes independence and cause-and-effect learning. The system consists of a wooden box supported by a steel frame with locking caster wheels, a switch-activated irrigation system. Adaptive button controls allow students to activate visually engaging sprinklers while interacting with plants and soil. The final prototype successfully met all design requirements for accessibility, mobility, durability, and watering performance …

Cal Poly Fluid Powered Vehicle Challenge 2025/2026, Ethan Malachi Nejame Zeiset, Christian Anthony Cuamani, Daniel Chacon-Bizarro, Marcus Minera, Bradley Hansell

Mechanical Engineering

In this Final Design Report, the Cal Poly Fluid Power Vehicle Challenge Contending Team competed in Sun Hydraulics’ 2026 Fluid Powered Vehicle Challenge. The objective of the competition is to expose college students to the fluid power sector, the “hidden giant” of the engineering industry. Specifically, student teams are tasked with the development of a human-powered, fluid-driven vehicle for use in various competitive settings. The team prioritized the optimization of an existing prototype for simplicity, ease of maintenance, and reliability during the competition. The existing prototype exhibited issues related to the main frame’s deflection under load, a lack of gear …

Off-Grid Cabin Hydroelectric Generator, Keller Feltman, Lance Savatgy, River Perino, Jesse Valencia

Mechanical Engineering

This project developed a portable hydroelectric generator intended to provide low-power electricity generation for an off-grid cabin in Alpine County, California. The system was designed to utilize naturally occurring creek flow to generate electrical power while remaining portable, durable, and environmentally conscious.

The final system consists of an axial-flow turbine, belt-driven generator subsystem, waterproof electronics enclosure, aluminum support frame, and integrated wildlife protection screening. Engineering analysis was performed to estimate hydraulic power availability, turbine performance, drivetrain requirements, and component lifespan. These analyses guided the selection and development of the final design.

Throughout prototype testing, several design modifications were required. Initial …

Multi-Ton Bin Transport Device, Cole Kramer, Ruth Stirrup, Fabian Ruiz, Daniel Ramirez

Mechanical Engineering

This project sought to solve a problem at the Water Resource Recovery Facility in San Luis Obispo with the transportation of multi-ton bins on-site. Their current solutions prove ineffective, as they damage their equipment and the concrete pad, as well as pose major safety risks to the operators moving these bins. The Facility requires the bin transport design to be low-cost, effective, and without risk of damage to the bins or surroundings, while maintaining the integrity of the bins. This project presents a conceptual design that is similar to a scissor lift, integrated into a trailer which will connect to …

Elastic Actuator For Robotic Leg, Bruce Berg, Allan Pham, Madeline Slater, Sofie Zalatimo

Mechanical Engineering

The Cal Poly Legged Robots Group (CPLRG) is developing a 12 degree of freedom robot with the goal of eventually performing highly dynamic movements such as jumps and flips. During such movements, large impact forces will be experienced by the leg, potentially resulting in damage to physical components such as the motors. The scope of this project is to integrate elastic elements into the quadruped legs to reduce shock loads on the motors and improve the efficiency of the legs through energy storage. The key stakeholders for this project are Professor Charlie Refvem and Dr. Simon Xing. Other stakeholders include …

Trace: Temporal Rhetorical Analysis And Consistency Evaluation For Legislative Speech, David Hernandez

Master's Theses

Legislators frequently discuss the same policy issues across multiple hearings and legislative sessions, sometimes maintaining consistent positions and other times modifying or reframing their stance over time. Understanding how these positions evolve is important for analyzing political discourse and democratic accountability, yet identifying such shifts at scale remains difficult.

We introduce TRACE (Temporal Rhetorical Analysis and Consistency Evaluation), a system built on the Digital Democracy Database (DDDB) for detecting rhetorical inconsistency in California legislative hearing testimony. TRACE organizes utterances into speaker-anchored timelines indexed by bill and session, then applies hybrid semantic retrieval — combining dense BGE embeddings with BM25 lexical …

The Use Of Modular Construction To Improve Schedule Efficiency, Brandon Ritchie

Construction Management

The construction industry continues to face growing pressure to deliver projects on tighter schedules with fewer resources. Modular construction has emerged as a delivery method with the potential to improve schedule efficiency by allowing off site fabrication and on site work to occur simultaneously. This research examines how modular construction affects schedule performance compared to traditional construction methods. When modular construction is well coordinated, project schedules will show improved efficiency compared to traditionally built projects. Qualitative interviews were conducted with members of the Whiting Turner team on the Cal Poly Student Housing Project, backed up by a review of schedule …

Skip The Grid: Bringing Solar Energy To The Navajo Nation, Makaela L. Zavala

Construction Management

Skip the Grid is an interdisciplinary service project in which California Polytechnic State University (Cal Poly) students partner with Heart of America and SOLV Energy to install off-grid solar systems for families in the Navajo Nation and Hopi Reservation. The project aims to address energy inequity by providing reliable electricity for lighting, refrigeration, and essential daily needs. This paper focuses on the communications and logistics planning required to support a large-scale service project involving over twenty students and multiple partner organizations. The methodology included coordinating travel, organizing team assignments, managing documentation, and maintaining communication throughout the trip. The project resulted …

Skip The Grid: Bringing Power To Navajo Nation Through Off-Grid Solar Systems, Maggie Papaharisi

Construction Management

Skip the Grid is an interdisciplinary service-learning project where California Polytechnic State University (Cal Poly) students partner with Heart of America and SOLV Energy to install off-grid solar systems for families in the Navajo Nation who do not have reliable access to electricity. Due to the remote location and high cost of infrastructure, a significant portion of households lack basic utilities, making access to lighting, refrigeration, and power difficult. During the 2026 project, a team of students from multiple disciplines spent several months preparing before traveling to Arizona, where installation teams completed solar systems in 50 homes over three days. …

Modular Student Housing At California Polytechnic State University, San Luis Obispo: A Case Study On Efficiency And Implementation, Michelle Lara

Construction Management

As universities continue searching for ways to deliver student housing more efficiently, volumetric modular construction has emerged as a potential alternative to traditional construction methods. However, there is limited documentation on how modular student housing projects are implemented on active California State University campuses. This study examines the implementation of volumetric modular construction on the California Polytechnic State University Student Housing Project through a qualitative case study approach. Data was collected through interviews with project personnel involved in construction management, project engineering, and fire and life safety compliance, along with a review of existing literature. While the project demonstrated several …

Foundation For A Digital Beamforming System Using Software Defined Radio, Daniel Cruz Guerrero, Shiron Bendrihem, Benjamin Tucker

Electrical Engineering

This report demonstrates a basis for the foundation of a software-defined radio (SDR)-based digital beam forming system. Specifically, a discussion of time, frequency, and phase synchronization is had in the absence of costly hardware like an OctoClock. Furthermore, this report digs deep into the design process and device characterization of a 4-way Wilkinson Power Divider, which is a necessary hardware component for phase calibration. SDR synchronization and calibration are critical in any digital beamforming system.

Design And Characterization Of A Pulsed Electric Field Chamber For Microalgae Lysis, Connor Strutin

Electrical Engineering

Microalgae are a promising renewable source of biofuel due to their high lipid content and rapid growth rates; however, algae cells must be electroporated (lysed) to release these lipids. The system developed in this project applies short (40 μs–10 ms), high-intensity (up to 33 kV/cm) pulsed electric fields (PEF) across cell membranes to enable electroporation.

Our lab-scale PEF chamber generates uniform, high-intensity electric fields using parallel-plate electrodes with sub-millimeter spacing. The system is designed to efficiently lyse microalgae cells for lipid extraction and biofuel production.

Maximum Power Point Tracking For Photovoltaic Cells, Rodrigo Menchaca-Ramirez, Jesus Martinez, Steven Rodriguez

Electrical Engineering

Unlike an ideal DC Power Supply, a solar panel does not operate with linear I-V Characteristics. The voltage and current characteristics of a solar panel change based on irradiance, temperature, weather conditions, and load demand. Because of these factors, solar panels do not always operate at their Maximum Power Point, which can lead to significant power losses. Maximum Power Point Tracking is used to adjust the panel operating point so that more usable power can be delivered to the load.This project developed a Maximum Power Point Tracking system using an STM32 Nucleo-L4A6ZG microcontroller and an LT8705A DC-DC converter stage. The …

Contributor Bios, Editorial Board

Intertidal

No abstract provided.