Digital Commons Network^™

Economic Barriers To Media Entrepreneurship And Media Plurality, Aidan Christopher Mcgloin

Journalism

The purpose of this article started out with a simple hypothesis: the lack of media plurality in America is due to an increase in news publishing costs and standards over the past hundred years. News presses have increased in so much cost that new publishers have no chance to front the high up-front cost or maintain journalistic quality with their competition.

Culminating Course Progress Report For The Na893 Community Support Center, Yokosuka Naval Base, Japan, Kazuo Miura

Fire Protection Engineering: Culminating Experience Project Reports

This is the culminating project report for the Fire Project Engineering Master’s of Science at California Polytechnic at San Luis Obispo. This project will consider a project for the US military in Japan, JFY893 Community Support Facility, Yokosuka Naval Base. The subject facility consists of a library, education center, family services, and other community services. The Library shall serve as the Main Base Library, keep and store books and provide library services for active duty population, dependents and retirees. The Education Center provides services for advancing of the academic, technical, and vocational education of military personnel of all grades and …

Acoustic Grin Lens, Matthew B. Luu

Electrical Engineering

Museum displays with audio explanations typically use headphones. A speaker’s sound at one display interferes with patrons at other displays, thus museums use headphones. These devices are either integrated into the display itself, or attached to an mp3 player. When integrated into the display, headphones can be unsanitary; when attached to an mp3 player, these devices are inconvenient. If speakers can direct sound toward an intended area, headphones can be eliminated. Acoustic horns direct sound toward a specific point, but require a large spatial footprint. Acoustic spherical concave lenses also direct sound toward a point, but exhibit excessive acoustic attenuation. …

Hvac Fan Control Using Modicon M580, Anthony Tyler, Kevin Shipp

Electrical Engineering

This project is the start of a lab experiment for the Cal Poly San Luis Obispo Electrical Engineering department’s new lab focusing on Programmable Logic Controller's (PLCs). The primary focus is to create a lab where students control a Heating, Ventilation, and Air conditioning (HVAC) system controlled by the Modicon M580 PLC, donated by Schneider Electric. The experiment contains a heat source, which the PLC monitors with a temperature sensor, and a cooling source with multiple fans. Students will learn to use function block diagrams to program the PLC, controlling fan output and regulating the system temperature. The experiment specifications …

Single Axis Solar Panel Tracking Mount Using Stepper Motor And Accelerometer Positional Control, Ezra Pramono

Electrical Engineering

Optimal solar panel systems rotate to track the sun, as solar panels operate at their maximum potential when the panel plane is completely normal to the sun’s rays. These tracking systems often using two axes of movement. This project is to design a system that will allow a solar panel to track the sun using only one rotational axis, which saves energy and uses fewer parts. The system tracks the entire range of the sun's motion and has positional feedback to allow control of the solar panel's angle. The position of the tracking system is controllable via an external computer. …

Pulsed Electric Field System Development For Algae Biofuel Extraction, Juan David Gonzalez Aguayo, Aspyn Bessler

Electrical Engineering

The search for sustainable alternatives to fossil fuels proves necessary due to the effects fossil fuels have on Earth’s environment. These alternatives must have a minimum ecological footprint and cause no long-term harm to the environment. An environmentally friendly fuel is necessary to usher in a generation of renewable green energy.

The production of algae refined biofuels becomes a possible solution to this growing issue. Algae absorb CO2from the atmosphere during their reproduction and growth cycles, yielding a positive environmental impact. As the biofuel is refined and becomes suitable for use, the combustion of the finished fuel generates an equal …

Polyone Smartphone, Joshua Zalmanowitz, Chi Nguyen, Gerome Cacho, Chris Lim

Electrical Engineering

The Poly One Smartphone is a student designed smartphone built to explore the implementation of 5G, provide a hardware solution to ensure personal information security and privacy, and provide longer battery life. The key features of this smartphone include but are not limited to a main cpu, some form of network connectivity in the form of Wi-fi or Cellular Data, calling functionality, a rechargeable battery that works with common power connection protocols, and compatibility with popular applications.

Analyzing Perceptions Of Music From A Songwriting Perspective, Jackson Stephen Reynosa

Communication Studies

This study seeks to understand listeners’ perceptions of music from a generational and songwriting approach. A total of 123 participants aged 18 and older took part in an open-ended survey design that measured their subjective music preferences. Four different sections tested participants’ music taste, music tied to generations, an original song made by the researcher, and songwriting in a holistic sense. It was found that participants exercised individualism and authenticity in their responses throughout. By using the Uses and Gratifications Theory, it is explainable that people listened and sought out music for their own unique reasons. By applying Mood Management …

Spring Loaded Camming Device, Jared S. Christner, Kaitlin O. Deherrera, Ryan W. Edwards, John S. Hickey

Mechanical Engineering

Spring loaded camming devices or “cams” are used in traditional rock climbing as a means of active fall protection. Climbers place cams in cracks and fissures in the rock wall. The cam’s lobes press against the walls, locking it in place, anchoring the climber in case of a fall. Currently, there is a lack of large cams on the market. Only two small companies produce cams that are usable in cracks 6.5 inches wide and larger, however their designs are either too heavy and/or lack features to be comfortable. We are a group of mechanical engineering students at Cal Poly …

California Solar Regatta - Hull Team: Up A Creek, Torrey Duncan, Sean Neuman, Kyle Krietzman, Andrew Offhaus

Mechanical Engineering

The SMUD Solar Regatta competition tasks students with developing a solar-powered watercraft to compete in various events on a fresh water lake. Cal Poly has created two mechanical engineering senior project groups to coordinate the design of a boat for the Solar Regatta competition. Up a Creek, the boat construction team, has created the following Final Design Review document to highlight the group’s progress on the project over the year. This document captures the design process from the background research, project objectives, and early concepts to the final design, manufacturing processes, and planned testing procedures. Unfortunately, the COVID-19 pandemic halted …

Importance Of Safety In Public Parks For Crime Prevention, Camille Frace

City and Regional Planning

The goal of this portfolio is research based education regarding the importance of safety in parks for crime prevention. By exploring the growing importance between safety, public parks, and crime prevention, learning about all factors incorporated and supporting the subject are both keys in understanding the relationship as a whole. The urban and built environments, crime statistics and perceptions, safety audits, design, conditions, and various other factors contribute to the overall picture of safety.

Analysis Of Aquifer And Operational Conditions For Successful Soil Aquifer Treatment Of Treated Wastewater Via Synthesis Of Published Full-Scale And Laboratory-Scale Studies, Matthew I. Murray

Master's Theses

Soil aquifer treatment (SAT) of treated wastewater performance was evaluated across published full-scale and lab-scale studies developing insights on the aquifer and operational factors that affect SAT efficacy. The goal of this study was to develop a basis for predicting the contaminant removal capabilities of any given aquifer during managed recharge with treated wastewater.

Over 40 published SAT studies were reviewed and systematically compared to determine the influence of five major factors on contaminant removal performance: geologic composition, geochemical conditions, hydrogeological conditions, operational methods, and source water quality. Removal mechanisms for standard contaminants (dissolved and total organic carbon, nitrogen, and …

Analysis And Optimization Of Colorimetric Nanosensors For Rapid Detection Of Microbes In Water, Ruby A. Lang

Master's Theses

Access to safe water is a basic human right recognized by the United Nations General Assembly in 2010 (WHO, 2020). However, a least 2.2 billion people globally still are without safely managed water services meaning they use a drinking water source that can be contaminated with faeces (WHO, 2020). With such a pressing global health issue, it is clear that improvement to water systems is important and required in the Agenda 2030 Sustainable Development Goals (SDGs). However, to improve water systems and prove they are safe water sources, water quality testing must occur. A solution to this issue is the …

Planning For Pollinators, Encouraging Biodiversity For Agriculture Resiliency, Sebastian Brian Cardoza

Master's Theses

Pollinators are essential to food production globally. Without them, the production of food becomes increasingly difficult, time consuming, and costly. Unfortunately, due to the rapid changes to our earth's physical and climatic structure millions of species are becoming classified as threatened, endangered or extinct. Among these declining species are pollinating insects such as Aphis mellifera (honeybee) and other native species. This is due to a phenomenon known as colony collapse disorder (CCD) and other native bees. The decline indicates that the future habitability of earth may be in jeopardy. The solution to this crisis is to expand the habitat of …

A Case Study On How Insulated Concrete Forms Can Prevent Structure Loss During Wildfires, Charles Myron Ackley

Construction Management

ICFs are a building material with unique thermal insulating and non-combustible properties that have shown great potential at protecting a structure during a wildfire. To prove the hypothesis that ICFs can effectively prevent structure damage or loss during a wildfire, an analytical case study on an ICF home that survived the Camp Fire was conducted. The goal was to understand how ICFs unique thermal insulating and non-combustible properties protect structures from wildfires and how this assembly system can be a lot more effective than a traditional frame structure. Additional objectives for the project included highlighting the growing threat of wildfires …

Enforcing Wildfire Prevention Regulations: Evaluating Enforcement Agencies In The County Of San Luis Obispo, Carly A. Hudak

Construction Management

This project aims to evaluate the enforcement of wildfire prevention policies in the County of San Luis Obispo. In the past few years, a series of highly destructive wildfires have ravaged the state of California, leading to scrutiny of wildfire prevention and its enforcement. This study focused on the County of San Luis Obispo to analyze the agencies responsible for enforcing wildfire prevention. In the County of San Luis Obispo, the County Planning and Building Department, County Fire Department, and Cal Fire State Department cooperate to enforce wildfire prevention measures across the County. Personnel from these agencies were interviewed to …

Building For Wellness - Healthy Building Course For Cal Poly Slo Cm Department, Lindsey Pierson

Construction Management

Construction Management programs across the country focus on educating students about the main segments of the construction industry, however, there is not courses that allow students to affiliate themselves with sustainable, healthy building practices. This senior project created the opportunity for students to learn about the rising segment trend of healthy building in construction. Students will be informed about what healthy building is and how it should be implemented into the construction and design process. Topics will focus on discussing hard and soft building components that negatively affect building occupant health and performance, as well as how each component can …

Addressing Reentry Experiences In California During Covid-19, Emily R. Cook

Social Sciences

I will first provide a literature review surrounding the topic of reentry and recidivism. Next, I will describe the projects that I completed related to reentry and reintegration in California including: participating in various parts of an educational reentry simulation, analyzing student responses to participation in this simulation, organizing a care package drive to assist those recently released, and creating a resource website compiling updates on the COVID- 19 crisis inside of the California incarceration system. I conclude by reflecting on my senior project experience.

A Screenplay For Bystander Intervention For Sexual Harassment Scenarios For College Students, Shanti Herzog

Journalism

This project was developed to describe the drafting of a screenplay for an interactive, virtual reality sexual harassment training module for students of the California Polytechnic University, San Luis Obispo. The research began with the examination of the prevalent and persisting issue of sexual harassment within college campus communities, and how to present college students with the tools to intervene as bystanders, thus encouraging them to intervene when encountering sexual harassment scenarios. The resulting screenplay was written to provide college students at Cal Poly with strategies to identify and take action when encountering sexual harassment, especially in small group gatherings …

Cal Poly’S Journalism Department: An Analysis Of Diversity And Inclusion, Sydney Gwenn Brandt

Journalism

In this project, I analyze what diversity and inclusion looks like in Cal Poly’s journalism department and how it compares to other universities and other programs. I spoke with several students about their experience in the department and their views on the efforts made to improve diversity. I also break down the demographics and share insight into goals the department has for improvements in staff and curriculum.

Cal Poly Rodeo Breakaway Jackpot Fundraiser, Molly Sparrowk, Laci Lowry

Agricultural Education and Communication

Every team member of the Cal Poly Rodeo team is required to bring in a certain amount of sponsorship money to help put on the annual Poly Royal Rodeo each April. While this money helps a lot, more money is still needed to cover the cost of production for Cal Poly Rodeo. This is where a breakaway roping jackpot will come in to play and help cover some additional production costs.

For this senior project, the authors plan on hosting a breakaway jackpot fundraiser for Cal Poly Rodeo. A breakaway jackpot consists of girl contestants roping three calves as fast …

Non-Toxic Soil Thickeners For Reducing Mudslide Intensity, Mitchell William Jensen

Materials Engineering

This project was intended to be a continuation of senior project work done last year by a group consisting of two Materials Engineering students and a Soil Science student. Their report was crucial in identifying a range of food thickeners that could be capable of performing in the mud thickening application. All thickeners that were chosen both this year and last year are biocompatible, to alleviate some toxicity concerns. The food thickeners all belong to a class of compounds known as colloids. Since water is the fluid being thickened, these compounds are more accurately referred to as hydrocolloids. Hydrocolloids are …

Investigation Of Ceramic Firing Processes For Investment Casting Shell Molds, Leonardo Ken Hoaakua Nakamura, Rileigh Anne Cotter

Materials Engineering

PCC Structurals aims to improve the quality and consistency of their ceramic mold production for their investment casting processes to decrease product loss figures. Although their current production processes result in acceptable quantities of high-quality molds, a significant percentage of defective molds are produced. These defective molds cause appreciable product loss due to casting defects and mold failure. Available literature dictates that high-quality investment casting molds must exhibit fracture strengths within a desired range in order to perform adequately. However, information regarding specific firing procedures which consistently result in ceramic mold strengths within this range is not readily available. To …

Effects Of Surface Finish On High Cycle Fatigue Of Inconel 718, Jessica A. Mcroskey, Matthew Busse

Materials Engineering

Inconel 718 is a nickel-based superalloy and commonly used rocket engine material due to its excellent properties at elevated temperatures. Its fatigue life relies heavily on the surface roughness, as fatigue introduces and propagates cracks at the surface. Part standards set by Aerojet Rocketdyne typically necessitate surface roughness values from 64 to 125 Ra. However, surface topography and residual stresses incurred from the finishing process also affect the fatigue performance. The specific goal of the project is to perform a literature review and write experimental methods to determine how the surface roughness, topography, and residual stresses from turning, grit blasting, …

Creating A Livestock Show From The Beginning For The Benefit Of Youth In The Agriculture Industry And Continuing The Tradition Of Showing, Chloé Fowler, Matthew Durian

Agricultural Education and Communication

Youth throughout the country have been shown to benefit through organizations focused on leadership and real-world tangible skills. Organizations such as the National FFA Organization and 4-H Youth Development are key organizations for this growth. Livestock shows are another layer to these organizations and youth development. “Livestock shows provide interactions through different environments that expose participants to different cultures,” (Davis, 1998).

For these reasons it is important to provide more opportunities to the next generation of agriculture. There are currently 28 different livestock jackpots within the state of California throughout one year, (CJLA, 2020). Due to the large geographic landscape …

Historic Building Renovation In San Francisco; A Business Plan, Robert Michael Courtney, Brendan Kha Hoang

Construction Management

This report explores the history and thought process behind an idea for a historical restoration company based out of San Francisco, California. This is a vital service for both building owners and the public, as historical buildings with deferred maintenance pose a threat to the lives and safety of civilians in the streets below. The city of San Francisco recognized that historical buildings may pose a threat to public safety and recently put an ordinance in place to mandate inspections and repairs of these buildings. There seems to be a gap between firms that profess the ability to assign qualified …

Residential Seismic Retrofit Cost For Home Located In Tustin, California, Sara Clark

Construction Management

Seismically retrofitting a residential home not only protects the homeowner, but also helps them prepare for the future. Needless to say, many older homes are not up to the 2018 International Residential Code. As a result, many owners are uninformed about how much it will cost to retrofit their home and what changes will have to be made. The solution for this is determining a cost per square foot ratio that will help homeowners calculate an estimate for the retrofit of their home. Additionally, it is important to break this cost down into what specific changes need to be made. …

The Building Process Of An Affordable And Constructible Tiny House: Preconstruction Process, Alexis Canas

Construction Management

Tiny Houses have become a trend that promotes affordable and sustainable living. Although tiny houses have become a trend, there are still a lot of people who are unaware of the movement. There are people who want to create their own tiny home but do not know how to or where to begin. This paper discusses the preconstruction process of a tiny house to help the reader get a better understanding of what building a tiny home entails. The preconstruction services included are a BIM model of the design, Architectural and MEP plans, construction estimate, and a schedule. The preconstruction …

Fitting In: Analyzing The Fit Of Safety Vests In The Construction Industry, Lizette Galvez Puentes

Construction Management

The construction industry continues to be a male-dominated industry; however, recent decades have seen a change of demographic, including an increase of women leadership. With the changing demographics, there is a lack of awareness and proactive integration of properly fitting safety vests to accommodate different body types. A properly fitting safety vest is crucial in upholding the safety of individuals working on a construction site, where certain genders are more frequently caught on jobsite material. These circumstances hinder the purpose and functionality of the safety vest’s primary functions, which, for the wearer, is increased visibility and the comfort to carry …

Executive Committee - Agenda, 5/12/2020, Academic Senate

Academic Senate Agendas

No abstract provided.